Manuale d’uso / di manutenzione del prodotto TC100 del fabbricante Siemens
Vai alla pagina of 124
SICLOCK s SICLOCK TC100 Plant Central Clock Operating Instructions 11/201 2.
11/201 2 A2B00094941-0 2 SICLOCK ® TC100 Plant Central Clock Operating Instructions s Preface, Table of Contents Safety instructions Description Hardware description Operation planning Mounting Conne.
Siemens AG I IA CE EDM Frauenauracher Strasse 98 D-91056 Erlangen Germany © Siemens AG 2010 Technical data subject to change. Safety notices This manual contains information th at must be obser ved to ensure your personal safety and to prevent property damage.
Preface-3 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Preface This document contains the infor mation required for operating and as signing parameters to the SICLOCK T C1 00 ce ntral plant clock. Area of application This manual is va lid for the SICLOCK ® TC100 product with firmware version V1.
Preface Preface-4 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
Contents-5 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Table of Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preface-3 1 Safety ins tructions .
Table of Contents Contents-6 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 6.3 Connecting external synchronization . . . . . . . . . . . . . . . . . . . . . . . . 6-33 6.3.1 SICLOCK GP S1000 . . . . . . . . . . . . . .
Table of Contents Contents-7 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 11 Service and maint enance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-89 11.1 Battery . . . . . . . . .
Table of Contents Contents-8 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
1-9 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Safety instructions 1 If you have questions about the validity of the installatio n in the planned environ- ment, please contact your service representative. Repairs Only authorized pe rsonnel are permitted to repair the device.
Safety inf ormation Siemens offers IT security mechanisms fo r its automation and drive prod uct po rt- folio in order to support the safe operation of the plant/ma chine. Our products ar e also continuously developed further with regard to IT secu rity.
Battery This device is fitted with a Lithium batter y. Batteries may only be replaced by qualified personnel. See Battery (Chapt er 11.1). EGB directives Modules cont aining elect rostatic sensit ive .
Safety Information 1-12 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
2-1 © Siemen s AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Description 2 Modern automation systems are made up of a multitude of computers, controllers and systems, that exchange data with one another.
Description 2-1 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 2.1 Layout of the SICLOCK TC 1 00 hardware The following diagram shows an applicatio n example of a SICLOCK TC100, with a SICLOCK GPS1000 as the radio clock an d an NTP server as an additional external sy nchronizatio n.
Description 2-1 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 2.2 External synchronization SICLOCK TC100 can be exte rnally synchro nized to the ap plicable, stat utory nati- onal time or GMT in order to automa te or minimize manual interven tions, such as daylight saving time changes and leap seconds.
Description 2-1 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 2.3 Time receivers The time receivers in th e plant are connected sole ly via Ethernet.
Description 2-1 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 2.4 Time management The SICLOCK TC100 h as a range of functi on s for generating the valid plant time from the external synchronization. Th is includes the o ption of setting time s zones and the parameteriza ble generation of dayligh t saving.
Description 2-1 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 2.6 Redundancy Redundant external sync hronization Up to four time ser vers can be run o n the SICLOCK TC100 for external synchro- nization via NTP. However, they must all be in the same IP network.
3-1 © Siemen s AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Hardware description 3 The layout of the hardware, togeth er with the connectors, ope rator controls and displays are described in this chapter.
Hardware description 3- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 3.2 Connection elements The following figure shows the connectors on the SICLOCK TC100.
Hardware description 3- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 3.3 Operator controls and displays The display and LEDs on the front panel show the current operating state. The keypad can be used for the basic opera ti on of the device.
Hardware description 3-2 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions For more detailed info rmation see Parameter ass ignment and oper ation of the device (Chapter 8) .
Hardware description 3-2 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 3.4 Scope of supply Table 3-2 Scope of supply of the individual versions of the device 2XV94.
Hardware description 3-2 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
4-2 © Siemen s AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Operation planning 4 4.1 Overview of operation planni ng SICLOCK TC100 is de signed for statio nary use in weather -proof locations in an industrial environ ment. The operating conditio ns surpass the requiremen ts of DIN IEC 60721-3-3.
Operation planning 4-2 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Use in residential areas , and operation in the public ne twork If you use the SIC LOCK TC100 .
Operation planning 4-2 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 4.2 Transport / storage condi tions Despite the device's rugg ed design, its internal componen ts are sensitive to severe vibr ations and s hock.
Operation planning 4-2 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 4.3 Unpacking and checking the delivery The device is completely assembled, te sted and packed in the factory, and has no internal transport locks.
Operation planning 4-2 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 4.4 Mounting positi on and fastening 4.4.1 Installation guidelines Before installing th e device, read the following general notes relating to installation.
Operation planning 4- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 4.4.2 Permissible mounting position Only a horizontal m ounting position is permi tted, that is the display is read from a horizontal viewing directio n.
5- © Siemens AG 2010 All Rights Reser ved SICLOCK ® TC100 Operating Instructions Mounting 5 5.1 Overview of mounting Figure 5-1 SICLOCK TC100 - view of mounting SICLOCK TC100 must be mo unted in an e a sily accessible position in the control cabinet.
Mounting 5-3 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
6-3 © Siemen s AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Connection 6 6.1 Overview of connection Ensure that the installation c omplies with the following conditions: .
Connection 6-3 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 6.2 Connecting the power supply The power supp ly is connected to term inal strip X1, and muss pa ss through a slow-blow 1A fuse . The device does not have a power switch.
Connection 6-3 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 6.3 Connecting external synchronization The signal from the connected radio cl ock is automatically detected, and dis- played in the parameter /Inputs/Input 1/Status (0.
Connection 6-3 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Functional check The incoming signal of the radio clock is indicated on the front pa nel by the "RADIO CLOCK" LED. The status of the radio clock is displayed in the para meter /Inputs/Input 1/Status (0.
Connection 6-3 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 6.3.1 SICLOCK GPS1000 The GPS receiver GPS1 000 is connecte d according to Figure 6- 3. Figure 6-3 Connection of the radio clock SICLOC K GPS1000 to RADIO CLOCK 1 We recommend using a two-wire, shielded cab le, e.
Connection 6-3 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 6.3.2 SICLOCK DCFRS Industrial version The industrial version o f the SICLOCK DCFRS radio clock inclu ded in the DCF77 package is connected as shown in Figure 6-4 .
Connection 6-3 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions A SICLOCK GPSDEC decoder is connected as shown in Figure 6- 5.
Connection 6- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 6.3.4 Third-party systems Third-party systems can also be used for external s ynchroniza tion of the SICLOCK TC100 if the followi ng conditions are fulfilled.
Connection 6- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 6.4 Connecting alarm and warning outputs During ope ration, the SICL OCK TC100 auto matically carr ies out a range of func- tion tests. If an error occurs, the device gene rates correspond ing messages on the display.
Connection 6-4 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
7-4 © Siemen s AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Configuration Tool 7 The SICLOCK TC100 Configur ation Tool is availa ble to make it easier to assign parameters and co nfigure the SICLOCK TC 100. The tool can b e called from an Internet brow ser as a Web interface.
Configurat ion Tool 7-4 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Preconditions PC • Minimum screen resolution of 12 80x1024 • Java Runtime of at least V1.
Configuration Tool 7-4 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Working with the Configurat ion Tool How to start th e Configuratio n Tool: 1. Open the Web browser 2. Enter the address of the device por t, e.g.
Configurat ion Tool 7-4 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 7.1 Menus Table 7-1 Menus in the Configura tion Tool Menu / function Meaning / note File Open Loads a parameter assignment/an archive from the local file system See also General functions (Chapter 7.
Configuration Tool 7-4 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions ? Help… Calls Help system Version… Displays version information for the Configuration Tool.
Configurat ion Tool 7-4 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 7.2 General functions The toolb ar of the Con figuration T ool pr ovides general functions for the parame- ters and the archive. You ca n also ackno wled ge events, and auth orize yourself in the Configuration Tool.
Configuration Tool 7-4 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 7.2.1 Connect / disconnect online connection How to establish an online conne ction to the SICLOCK TC100: 1. Enter the IP address of the device in the toolbar.
Configurat ion Tool 7- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 7.2.2 Authorization There are a uthorizati on levels for ea ch para meter, which allow or forbid read and write accesses to the parameter.
Configuration Tool 7- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 7.3 Parameters You can set and transfer parame ters to the SICLOCK TC100 in the Par ameter tab of the Configuratio n Tool in both offline and online modes.
Configurat ion Tool 7-5 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Table 7-3 Possible operations and displays in the Parameter tab Field / butto n Meaning / instru ction Print table in text file Outputs p arameter assignment i n a text fil e.
Configuration Tool 7-5 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Parameter tree Tree display of parameters The parameters are subord inated in the trees of the i ndividual menus and submenus. Online m ode: In online mode, you can open a contex t menu with a right mouse click on th e parameter / entry.
Configurat ion Tool 7-5 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Number Unique, three-part paramete r number, e.g. 000.005.00012 Parameter Related values are grouped in a parameter. Parameter lists are displayed with square brackets after the parameter name, e.
Configuration Tool 7-5 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 7.3.1 Sorting Parameter tables How to sort a Parameter tabl e by number or parameter: 1. Click the "Number" or "Parameter" column wi th the mouse.
Configurat ion Tool 7-5 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 7.3.3 Editing parameters Precondition for editing a para meter entry • It must be a writable entry ( ). How to cha nge the va lues of a p arameter entry: 1.
Configuration Tool 7-5 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions How you check whethe r the value has been ac cepted by the device: 1. In online mode, sele ct the entry of the cha nged parameter as descr ibed above.
Configurat ion Tool 7-5 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 7.3.4 Reading / writing parameters , setting to factory defaults In online mode, you can read o r write an in dividual parameter , or reset it to the factory setting.
Configuration Tool 7-5 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 7.4 Archive In the Archive tab of the Con figuration Tool, you can loa d archived data from the device, and save the data in a file, as well as evaluate and sear ch the data with filter functions.
Configurat ion Tool 7- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Table 7-4 Possible operations and displays in the Archive tab Field / button Meaning / instru ction Print table in text file Outputs the archive in a text file.
Configuration Tool 7- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Archive table Events are shown in tabular form.
Configurat ion Tool 7-6 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 7.4.1 Sorting the Archive table How to sort the Archiv e table by time or event: 1. Click the "Time" or "Event" column with the mouse.
Configuration Tool 7-6 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 7.4.2 Filters You can show and hide sp ecific events by means of a filter to make searching th e archive easier.
Configurat ion Tool 7-6 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 7.5 Troubleshooting Frequent questions about the SICLOCK TC 100 Configur ation Tool and solutions to problems are listed below.
Configuration Tool 7-6 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Parameters are disp layed without values The authorization leve l has been raised after a download, so that parameters with a higher authorization are visible.
Configurat ion Tool 7-6 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
8-6 © Siemen s AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Parameter assignment and operation of the device 8 SICLOCK TC100 has a two-line, alphanumer ic LCD display with background lighting and au to- matic contrast control fo r displaying t he date and time, me ssages and status.
Parameter assignment an d operation of the de vice 8-6 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 8.1 Status display When the device is switched on, operatio n and status display are not p ossible for a brief ramp-up time.
Parameter assignme nt and operation of the device 8-6 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Status display with queued mes sage Figure 8-4 Example of display during op eration with erro r The top line shows the message type and the date / time alternately.
Parameter assignment an d operation of the de vice 8- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 8.2 Operation and parameter assignment 8.2.1 One-button operation with the MODE button The MODE button enable s restricted oper ation and im portant pa rameters t o be read out directly on the device.
Parameter assignme nt and operation of the device 8- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Example 2: Figure 8-6 Example 2 of one-button o peration The display shows the readout of the currently set IP ga teway.
Parameter assignment an d operation of the de vice 8-7 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 8.2.2 Network settings on the device One-button operation can be used to read out the network se ttin gs of the device, and settin gs can be ma de to th e extent required for commissioning.
Parameter assignme nt and operation of the device 8-7 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions In this way, you c an add your own va lues to the list of opt ions, and assign any IP addresses : For this purpose, you need a no tebook or PC with an Etherne t connection to the device.
Parameter assignment an d operation of the de vice 8-7 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
9-7 © Siemen s AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Parameter assignment 9 Frequently required settings are described in the following .
Parameter assignment 9-7 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 9.1 Connecting external synchronization The external synchroniza tions can be connected to SICLOCK TC100 via Ethernet as an NTP ser ver and/or as a radio clock via poin t-to-point connections.
Parameter assignment 9-7 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 9.1.2 Operation as NTP client Four IP addresses of NTP servers can be assigned for SICLOCK TC100 as an NTP client. The servers are quer ied regularly, and a preferred server is selected according to a strict selection strategy.
Parameter assignment 9-7 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 9.2 Connecting time receivers The following options are available for connecting the time re.
Parameter assignment 9-7 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 9.2.2 SIMATIC mode SIMATIC mode is supported at t he Ethernet port by two protocols: • PCS7-compatible mode • S5-compatible mode The setting is made with the parameter /SIMATIC Mode/Ethernet 1 (0.
Parameter assignment 9- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 9.3 General settings on the device The important general settings are describ ed in the following, e.g . the time adjust- ment, the synchroniza tion response etc.
Parameter assignment 9- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Daylight saving The device makes the daylight saving change automatically at the parameteri zed switching times. Parameter /T ime/Extended/Daylight Saving (0.
Parameter assignment 9-8 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Microsteps If a difference occurs between the input sy nchronization ( e.
Parameter assignment 9-8 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 9.3.5 Temperature You activate the monitoring of the module temp erature with the param eter entry /Environme nt/Extended /Temperatur e/Monitorin g (0.
Parameter assignment 9-8 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
10-8 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Parameter table 10 Table 10-1 List of SICLOCK TC100 parameters Access 1) / no. Parameter Eintry Value range / default Time 0.09.04 Local time Time and date 0.09.02 UTC time Time and date 0.
Parameter table 10-8 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Time / Extended /Atomic Time TAI 0.09.03 TAI time Time and date 0.09.01 Offset from UTC to TA I Offset Min: Max: Default: -32768 s +32767 s +0 s 0.
Parameter table 10-8 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Redundanz 0.09.10 Redunda ncy Priority Min: Max: Default: Master Slave Master Timeout Min: Max: Default: 10 mins 720 mins 30 mins Network settings / Ethernet 1 0.
Parameter table 10-8 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions NTP server 0.16.01 NTP server Operation Min: Max: Default: On Only when synchronized On 0.16.02 Multicast[4] Mode Min: Max: Default: Off 60 s with local time Off Multicast address Min: Max: Default: 0.
Parameter table 10-8 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Data bits Min: Max: Default: 0 8 0 Parity Min: Max: Default: None Odd None Stop bits Min: Max: Default: 0 2 0 Display 0.
Parameter table 10- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Get more information List of icons (Chapter C) Authorization (Chapter 7.2.2) 0.28.03 Firmware base (A2B00061430) A2B number Min: Max: Default: 0 4294967295 0 Version number Min: Max: Default: 0.
11- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Service and maintenance 11 11.1 Battery The device has an integrated batte ry which supplies a clock module and th e archive buffer duri ng phases without the power supp ly.
Service and maintenance 11-9 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 11.3 Software update Please contact Product Support for informa tion an d software updates for your SICLOCK TC100.
12-9 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Messages 12 The mess ages are cla ssified unde r four differe nt types of event: • System (capacity for approx. 1,500 en tries) • Application (capacity for ap prox.
Messages 12-9 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Default processor load ed Warning The default processor was loaded du ring the start. Input 1: DCF77 OK Information After a disturbance, th e correct DCF re ception has been detecte d again.
Messages 12-9 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Processor has not been updated System and Information A processor update has been performed, but the processor could not be updated. Hardware time set Information The SICLOCK TC100 internal real-time clock has been set.
Messages 12-9 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Synchronization density Information States the number of synchronization inputs pe r interval. The message is triggered cyclically, and se rves to evaluate the qua lity of reception.
13-9 © Siemens AG 2010 All Rights Reserved Operating Instructions SICLOCK ® TC100 Technical data 13 Table 13-1 SICLOCK TC100, technical data Dimensions 180.0 x 88.9 x 47.0 (W x H x D in mm) Weight approx. 750 g Supply voltage 24 VDC (-15% to +20%) at X1 Power supply continuous current 0.
Technical data 13-9 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Battery Service life in o peration > 12 years Service life when switched off during storage > 12 years Service life when switched on during storage < 6 years, see Battery (Chapter 11.
Technical data 13-9 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Status displays on the device Display Two-line, alphanumeric LCD display with backgrou nd lightin.
Technical data 13- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
Dimension drawing 14 Figure 14-1 Dimension drawi ng 1 -101 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
Dimension drawing 14-10 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
15-10 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Circuit diagrams 15 15.1 Terminal assignment Figure 15-1 Terminal assignment SICLOCK TC100 ; ; ; ; ; ; ; ; ; SDVVLYH 5DGLR&ORFN 5$',2&/2&.
Circuit diagrams 15-10 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
16-10 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Spare parts / accessories 16 Table 16-1 Spare parts and accessorie s with order numbers Order no.
Spare parts / accessories 16-10 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
A-10 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Annex A A.1 Directives and declarations Notes on the CE marking The following applies to the produ ct described .
Annex A-10 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions A.2 Certificates and approvals DIN ISO 9001 certificate The Siemens quality manage ment system for all production process es (develop- ment, production and sa les) meets the requirements of DIN EN ISO 9001.
B-10 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions ESD guidelines B B.1 Electrostatic se nsitive devices Definition All electronic modules are e quipped with hi ghly integrated ICs or components.
ESD guidelines B-1 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions B.2 Electrostatic char ging of persons Charge Anyone who is not connected to the electr ical potential of th eir surroundings can be electrostatically charged.
ESD guidelines B-1 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions B.3 Fundamental measures to protect against static discharge Make sure the grounding is good Make sure all persons, workplaces and packaging ar e sufficiently grounde d when ESD compon ents are bein g handled.
ESD guidelines B-11 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
C-11 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions List of icons C Table C-1 Icon Description Toolbar of the Configuration Tool (See also General functions (Chapter 7.
List of icons C-11 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Master level Master level without upload Operationally critical parame ters Display parameters Entry This involves a parameter entry Archive tab (see also Archive (Chapter 7.
D-11 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Glossary D Alarm Alarms are events with incoming and outgoing status. See Device . Archive The archive contains relevant events with additional information from the device.
Glossary D-11 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Events An event is triggered by the device, and is a message or a device statu s.
Glossary D-11 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Online mode There is a connection betwee n the Configuration Tool and th e device. The current status is shown in color in the entry field of the IP address, in online mode the IP address is green.
Glossary D-11 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Radio clock All SICLOCK products that receive time vi a an aerial are term ed radio clocks. The SICLOCK products SICLOCK DCFRS, SICLOCK GPSDEC, SICLOCK GPS1000 and packages include radio clocks.
Glossary D-11 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions UTC UTC stands for universal time coordi nated. It is a combination of the international atomic time TAI and the u niversal time UT. The time zones are defined as positive or negative di fferences from UTC.
Glossary D-1 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions.
Index-1 © Siemens AG 20 10 All Rights Reserved SICLOCK ® TC 1 00 Operating Instructions Index A Alarm output, 6-39 Atomic time, 9- 78 Authorization, 7-48 B Battery, 9-81 , 11-89 C Configurat .
R Radio clocks, 9-74 Ramp-up, 8- 66 Redundancy, 2-16 S Safety instructions, 1-9 Scope of d elivery, 3-21 SICLOCK DCFRS, 6-36 SICLOCK GPS1000, 6-35 SICLOCK GPSDEC, 6-37 SICLOCK TC100 Configuration Tool.
Siemens AG I ndustry Sector Postfach 4 8 48 9 002 6 N UREMBERG GERMANY www.siemens.com/siclock.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Siemens TC100 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Siemens TC100 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Siemens TC100 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Siemens TC100 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Siemens TC100, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Siemens TC100.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Siemens TC100. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Siemens TC100 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.