Manuale d’uso / di manutenzione del prodotto SpeedStream 6500 Series del fabbricante Siemens
Vai alla pagina of 98
SpeedStream ® 6500 Series Residential Gateway User’s Guide Part No. 007-6770-001.
6500 Residential Gateway User’s Guide © Copy right 2004, Siemen s Subscriber Network. All rights reserv ed. Pr inted in the U.S.A. Product names mentioned herein may be trademarks and/or registered tr ademarks of their respective companies.
6500 Residential Gateway User’s Guide D. SIEMENS will return the repaired or r eplacement Product to the end us er at the address provided by the end user at SIEMENS’s expense.
Contents CHAPTER 1 INTR ODUCTIO N ..................................................................................................................... 1 Features of the Resident ial Gatew ay Family ....................................................
6500 Series Residential Gateway User’s Guide Contents CHAPTER 6 CONFIGURING ADVANCED FEAT URES ........................................................................... 37 ISP Conn ection ...........................................................
1 1 Chapter 1 Introduction This chapter provides an overview of the Gateway's features and capabilities. Congratulations on the purchase of your new SpeedStream SS6500 Series Residential Gateway (Gateway).
6500 Series Residential Gateway User’s Guide Introduction • Stateful Inspection Firew all All incoming data packets are monitored and all incomi ng server requests are f iltered, thus protecting your network from malicious attacks from ex t e rnal sources.
6500 Series Residential Gateway User’s Guide Introduction Minimum System Requirements At a minimum, your computer must be equipped with the following to successfully install the Gateway. Your Internet Service Provider may have additi onal requirements for use of their service.
6500 Series Residential Gateway User’s Guide Introduction Physical Details Familiarize yourself with the Gateway before installing. Front Panel LEDs The front panel contains the following LEDs: Green Power is on. Off Power is off. Pow er Red The Power LED briefly shows red during power-up.
6500 Series Residential Gateway User’s Guide Introduction Rear Panel DSL Port (RJ11) Connect the RJ11 DSL cable (looks like a telephone cord) here to use your DSL connection through an existing phone line. USB Port If your Gateway has a USB port, connect the USB cable here.
6 Chapter 2 Installation This chapter covers the physical inst allation of the SpeedStream Gateway. Minimum System Requirements • DSL service and an Internet access account from an Internet Service Provider (ISP). • Network cables for each device you intend to connect to the Gateway.
6500 Series Residential Gateway User’s Guide Installation Installing Line Filters Because DSL shares your telephone line, you may need to separate the two signals so they do not interfere with each other. A line filter (may be in cluded with some models) prevents DSL traffic from disrupting the voice signal on the telephone line, and vice versa.
6500 Series Residential Gateway User’s Guide Installation Connecting Cables The SpeedStream Gateway provides ports for either a USB or an Ethernet c onnection to your primary computer. Select the interface you will use to connect the Gateway, and follow the step-by-step instructions below for your chosen installation method.
6500 Series Residential Gateway User’s Guide Installation USB Installation Method (Microsoft Window s) 1. Connect the USB Cable 1) With your computer off, c onnect the provided USB cable to the USB port on the Gateway. 2) Connect the other end of the USB cable to an open USB port on your computer.
10 Chapter 3 Operating System Configuration This chapter explains how to configure each computer on your network to work with the Gateway. To access the Internet through the SpeedStream Gateway, the TCP/IP protocol must be installed on your computer. If TCP/IP is not already installed on y our computer, install it.
6500 Series Residential Gateway User’s Guide Operating System Configuration Checking TCP/IP Settings (Windows 9x/ME) 1. Select Start>Control Panel >Netw ork . This displays the Configuration tab on the “Network” window. 2. Select the TCP/IP protocol for your network card.
6500 Series Residential Gateway User’s Guide Operating System Configuration Checking TCP/IP Settings (Windows 2000) 1. On the Windows taskbar click Start>Settings>Control Panel . This displays the “Control Panel” window. 2. Double-click Netw ork and Dial-up Connections .
6500 Series Residential Gateway User’s Guide Operating System Configuration Checking TCP/IP Settings (Windows XP) 1. On the Windows taskbar click Start>Control Panel . This displays the “Control Panel” window. 2. Double-click the Netw ork Connection icon.
6500 Series Residential Gateway User’s Guide Operating System Configuration Checking TCP/IP Settings (MAC OS 8.6 through 9.x) 1. Select Apple >Control Panel >TCP/IP . This displays the “TCP/IP” window. 2. Select one of the following from the Connect via drop-down menu.
6500 Series Residential Gateway User’s Guide Operating System Configuration Checking TCP/IP Settings (MAC OSX) 1. Click Apple -> System Preferences . This displays the “S ystem Preferences” window. 2. Double-click the Netw ork icon under the Internet & Netw ork section.
6500 Series Residential Gateway User’s Guide Operating System Configuration Internet Access Configuration Windows users must configure their computers to use the Gateway for Internet access. Ensure that the Gateway is installed correctly and the DSL line is functional.
17 Chapter 4 SpeedStream Gateway Setup This chapter describes how to connect to and setup your Gateway configuration. This chapter describes the steps to set up the S peedStream Gateway configuration using the Gateway Setup Wizard.
6500 Series Residential Gateway User’s Guide SpeedStream Gateway Setup Connecting to the Gateway You can connect to the Gateway using UPnP (if it is enabled on your computer) or through the Web browser .
6500 Series Residential Gateway User’s Guide SpeedStream Gateway Setup Gateway Setup Wizard The first time you connect to the Gateway, the Setup Wizard runs automatically. (The Setup Wizard also runs if the Gateway's default settings are restored.
6500 Series Residential Gateway User’s Guide SpeedStream Gateway Setup 6. Click Next . This displays the “Configure Time Zone” window. Optionally set the time zone of the area of the wo rld in which you live on the “Configure Time Zone” window.
6500 Series Residential Gateway User’s Guide SpeedStream Gateway Setup Set the wireless security level from the “Wireless Security Configuration” window. ALL wireless devices attached to the Gateway MUST have the same wireless security settings for your network to have proper communications and security.
6500 Series Residential Gateway User’s Guide SpeedStream Gateway Setup 15. If the Powerline window appears, select one of the following Pow erline Interface options: • Disable Powerline connection is disabled. Click Next . This displays the “Finish” window.
6500 Series Residential Gateway User’s Guide SpeedStream Gateway Setup Wireless Setup WEP 64-Bit Option WEP security offers the same sec urity offered by a wired LAN with encrypted packets. This option offers 64-bit encryption, which is the least secure WEP opt ion.
6500 Series Residential Gateway User’s Guide SpeedStream Gateway Setup Wireless Setup WEP 128-Bit Option WEP security offers the same sec urity offered by a wired LAN with encrypted packets. This option offers 128-bit encryption, which is the most secure WEP opt ion.
6500 Series Residential Gateway User’s Guide SpeedStream Gateway Setup Wireless Setup WPA PSK Option WPA security changes encryption keys after a specified amount of time. This is the most secure option for wireless networks. This section assumes you cu rrently have the “Wireless Se curity Configuration” window displayed on your computer.
6500 Series Residential Gateway User’s Guide SpeedStream Gateway Setup Home Window After finishing the Setup Wizard and clicking Configure , the Home window appears. This window also appears from now on when connecting to the Gateway. After finishing the Setup Wizard and clicking Configure, the “Home” window is displayed.
6500 Series Residential Gateway User’s Guide SpeedStream Gateway Setup Toolbar The Gateway has three primary toolbar buttons: Users, Devices, and Gateway.
5 Chapter 5 Configuring Users and Devices This chapter explains how to confi gure users and devices on the Gateway. This chapter contains details for configuring users and devices on the Ga teway. This chapter is organized into two parts corresponding to the buttons in the toolbar: Users and Devices .
6500 Series Residential Gateway User’s Guide Configuring Users and Devices 2. Type a user name in Username . 3. Type a password in Password . 4. Re-type the password in Confirm . 5. Click Next . This displays the “Profile Content F iltering” window.
6500 Series Residential Gateway User’s Guide Configuring Users and Devices Profile configuration access defines the access per mission for a user controlling what functions and features are available to that user. 9. Select one of the following profiles and click.
6500 Series Residential Gateway User’s Guide Configuring Users and Devices • Only allowed from The user can only access the Internet at the time range set in the time drop-down menus. Be sure to specify the from and until times the user can access the Internet.
6500 Series Residential Gateway User’s Guide Configuring Users and Devices • Select a color from the drop-down menu. • Type a numeric color value in the box next to the color drop-down menu.
6500 Series Residential Gateway User’s Guide Configuring Users and Devices Editing A User Profile This section describes how to edit a user profile. You must be logged in as the administrator to edit a user profile.
6500 Series Residential Gateway User’s Guide Configuring Users and Devices Deleting a User This section describes how to delete a user. You must be logged in as the administrator to delete a user. To delete a user: 1. From the “ Users Profile ” window, click the button in the le ft navigation pane corresponding to the user you want to delete.
6500 Series Residential Gateway User’s Guide Configuring Users and Devices Viewing User Logs User logs provide time stamped information about the activity of the user over the network. To view user logs: 1. From the “ Users Profile ” window, click the button in the le ft navigation pane corresponding to the user you want to delete.
6500 Series Residential Gateway User’s Guide Configuring Users and Devices Configuring Devices The Devices option allows you to view devices connec ted to your Gateway. If you are logged in as the administrator, you can view all the connected devices to the Gateway.
37 6 Chapter 6 Configuring Advanced Features This chapter explains how to confi gure advanced features on the Gateway. This chapter contains details for configuring the many advanced features available with your Gateway. Some of the features described below require at l east a mid-level understanding of networking principles.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features ISP Connection The ISP Connection option displays all active and available Internet connections. Many of the settings for this option are intended for use only by advanced users.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Advanced ISP Settings The Gateway provides access to additional, advanced ISP configuration settings. All the options in this section should only be configured with the help and gui dance of your ISP.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features ATM Virtual Circuits Use the ATM virtual circuit advanced option to create and configure a Permanent Virtual Circuit (PVC). A PVC is used to maintain a permanent connection between two points on a network.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Static Routes Use the static routes advanced opti on to configure static routes to remote equipment. Static routing allows a pre-defined route to be set for the transmissi on of data.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Dynamic DNS Use the dynamic DNS advanced option to set up dy namic DNS. Dynamic DNS translates IP addresses into alphanumeric names. For example, an IP address of 333.136.249.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features RIP (Routing Information Protocol) Using RIP, the Gateway is able to determine the shortest distance between two points on the network based on the addresses of the originating devices.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Home Network The Home Network option displays all network-rela ted information. You must be logged in as the administrator to access this option. To use the Home Network option: 1.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features IP Network The Gateway provides the flexibility to use differ ent ranges of IP addresses to be assigned by the DHCP Server housed in the Gateway.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Server Ports Common applications such as HTTP (Web site tra ffic), FTP, and Telnet use pre-defined incoming port numbers for compatibility with other services. If you wish to change the ports used by these applications you may do so using this option.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features LAN/WAN Port If your Gateway contains four Et hernet ports, Ethernet port #4 can be us ed as either a LAN (network) port or as a WAN (Internet connection) port.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Wireless Network Configure the wireless network using this option. The wireless settings on the Gateway must match those of any wireless clients on your network. To configure the wireless network: 1.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Set the wireless security level from the “Wireless Security Configuration” window. All wireless devices attached to the Gateway MUST have the same wireless security settings for your network to have proper communications and security.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Wireless Setup WEP 64-Bit Option (Advanced Home Network) WEP security offers the same sec urity offered by a wired LAN with encrypted packets. This section assumes you currently have the “Wire less Security Configuration” window displayed on your computer.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Wireless Setup WEP 128-Bit Option (Advanced Home Network) WEP security offers the same sec urity offered by a wired LAN with encrypted packets. This option offers 128-bit encryption, which is the most secure WEP opt ion.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Wireless Setup WPA PSK Option (Advanced Home Network) WPA security changes encryption keys after a specified amount of time. This is the most secure option for wireless networks.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Wireless Filter and Options Configuration Control access to the Gateway of wireless devices based on the MAC address of the device using the “Wireless Filter Configuration” window.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features 5. Optionally, configure the following items: • Data Transfer Rate If a particular wireless client is unable to auto- negotiate a connection to the Gateway, the data transfer rate may be set to a specific data ra te such as 11 Mbps for 802.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Powerline Security Configuration If you have a Powerline enabled Gateway, you have the opt ion of configuring security for the Powerline connection. To configure powerline security: 1.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features 5. Select one of the following Powerline Filter options: • Enable Enables powerline filtering. • Disable Disables powerline filtering. If powerline filteri ng is disabled, all devices have access to the Gateway.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features UPnP (Universal Plug and Play) Microsoft UPnP allows the Gateway to communicate directly with certain Wi ndows operating sy.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features 7. Double-click the icon. The Gateway will open another Web page for UPnP functions. Now, NAT functionality is available. The Gateway will create virtual servers automatica lly when it detects the computer running Internet applications that require this configuration.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Security Your Gateway provides broad security measures agai nst unwanted users. Security also allows for the configuration of the Gateway firewall, administrat or password, (NAT) Network Address Translation, and DMZ (Demilitarized Zone) configuration.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Firewall Settings A firewall is a system designed to prevent unauthorized access to or from a private network. The firewall window provides a listing of options to be enabled or disabled as well as links to configure the more complex details of each feature.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Security Lev el Security level refers to how much access is permi tted from your Gateway to the Internet or other networks. To enable and configure the security level feature: 1.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Attack Detection If the Attack Detection System is enabled, the Gate way provides protection against the most common hacker attacks that attempt t o access your computer/network from the I nternet.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features • TCP FIN An outside device can send an attack using TCP FIN. Th is attack never allows a data packet to finish transmitting and brings down your system. • TCP XMAS An outside device can send an attack using TCP packets with all the flags se t.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features IP Filtering Define inbound and outbound IP filter rules using this pr ocedure. IP filtering rules can only be defined if the Firew all Level setting is Custom . This method of firewall protection is recommended for advanced users only.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Add New IP Filter Rules The “Basic Rule Definition” window is displayed when you select Add New IP Filter Rule from the “ Firewall IP Configuration Wizard ” window. Using this option, you can define both inbound and outbound rules.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features 9. If you selected This IP Address , enter an IP address in the IP Address field and do one of the following: • Enter a netmask in the Netmask field. • Select or Host to use your Gateway netmask as the source netmask.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features TCP/UDP Options Window The “TCP/UDP Options” window is displayed if you select TCP or UDP protocol from the “ Protocol Definition ” window. If you selected either of these prot ocol types, you must identify the source and destination ports.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features ICMP Options Window The “ICMP Options” window is displayed if you select ICMP protocol from the “ Protocol Definition ” window. 1. Do one of the following: • Select any of the ICMP options you wish to filter.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Clone IP Filter Rules The “Clone Rule Definitions” window is displayed when you select Clone IP Filter Level from the “ Firewall IP Configuration Wizard ” window.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features DMZ The DMZ feature allows a computer on your home net work to circumvent the firewall and have direct access to the internet.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Firew all Snooze Control The snooze feature allows you to bypass the fire wall for a set amount of time so outside support personnel can access your Gateway or network, or so you can run an application that conflicts with the firewall.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Administrator Password You may change the Gateway administrator password at any time if you have admin istrative rights to the Gateway. To change the administrator password: 1.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Address Translation The Address Translation feature provides different methods of keeping individual users/computers hidden behind a single outward-facing address, while still a llowing them to access the Internet and related applications.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Address Translation With NAT Network Address Translation (NAT) translates an IP address from your home network to an address on the Internet. It allows only one machine to access the Internet.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features Address Translation With NAPT Many applications require special port access to the Internet in order to function.
6500 Series Residential Gateway User’s Guide Configuring Advanced Features 5. Do one of the following: • Select one of the following services from the Select service by name drop-down menu. − Telnet Telnet is a program that allows you to connec t to other computers over the Internet.
77 Chapter 7 Monitoring Gateway Health This chapter explains how to m onitor the health of the Gateway. This chapter describes how to monitor the health of the Gateway. The Gateway health options are used to gauge the various measures of Gateway’s health .
6500 Series Residential Gateway User’s Guide Monitoring Gateway Health Statistics You can display statistics for the Internet, Home Networking, Security, and Logging. To display any of these statistics, click the Statistics button from the “ Gateway Health ” window.
6500 Series Residential Gateway User’s Guide Monitoring Gateway Health Internet Stats Internet statistics are commonly used by your Inte rnet Service provider to diagnose service-related issues. Internet statistics include either ATM or DSL statistics.
6500 Series Residential Gateway User’s Guide Monitoring Gateway Health Home Netw orking Stats Home Networking statistics are helpful for troubleshoot ing issues on your home network. These statistics are displayed for each physical interface connect ed to the Gateway.
6500 Series Residential Gateway User’s Guide Monitoring Gateway Health Logging Extensive activity logs are provided for advanced troubleshooting and administrative use. The following types of logs are available: System , Firewall , and User Access .
6500 Series Residential Gateway User’s Guide Monitoring Gateway Health Update Firmware This feature updates the firmware of your Gateway through the Internet or from a device connected to your Gateway. This option may not be available on your Gateway configuration.
6500 Series Residential Gateway User’s Guide Monitoring Gateway Health Diagnostics The Gateway provides diagnostic tests and data for eac h interface. This data is commonly requested by technical support to assist in troubleshooti ng. To access this feature, click the Diagnostics button from your “ Gateway Health ” window.
84 Chapter 8 Miscellaneous Gateway Options This chapter explains how to customize the appearanc e of the configuration program and to reboot the Gateway. This chapter is organized into parts that correspond to the following buttons shown in the Gatew ay Options pane.
6500 Series Residential Gateway User’s Guide Miscellaneous Gateway Options Color Palette Multiple color selections are available to customize the appearance of the configuration interface/program. To configure the color palette: 1. From the “Customized Settings” window, click the Color Palette button.
6500 Series Residential Gateway User’s Guide Miscellaneous Gateway Options Language Multiple languages may be available for displaying text in the configuration interface/program. This option may not be available on your Gateway configuration. To set the language used on the Gateway windows: 1.
6500 Series Residential Gateway User’s Guide Miscellaneous Gateway Options Time Zone Using this option, you can configure the time parameters to automatically synchronize the Gateway’s internal date and time settings with those of your selected time zone.
6500 Series Residential Gateway User’s Guide Miscellaneous Gateway Options Reboot You can reboot the Gateway using the Reboot option, or you can reset the Gateway to factory defaults using the reset option. Reboot should be used when the Gateway needs to be restarted.
89 A Appendix A Troubleshooting Overview This chapter covers some common problems that may be encountered while using the Wireless DSL Gateway and some possible solutions to them. If you follow the suggested steps and the Gateway still does not function properly, contact your Internet Service Provider or Technical Support for assistance.
6500 Series Residential Gateway User’s Guide Appendix A - Troubleshooting Contacting Technical Support Before contacting technical support, please refer to the previous troubleshooting information. For issues concerning DSL service or connectivity , contact your Internet Service Provider (ISP) directly.
91 Appendix B Specifications Media Interface: RJ-11 DSL WAN connection (5) 10/100Base-T RJ-45 Ethernet LA N connections (Auto-MDI/MDI-X) USB Type B connection DB-9 RS-232 Serial console port Diagnosti.
6500 Series Residential Gateway User ’s Guide Appendix B Specifications R outing: DHCP server and DNS agent Network Address Port Translation (NAPT) Network Address Translation (NAT) Packet filtering.
Siemens Subscriber Netw ork 4849 Alpha Road Dallas, TX 75244 USA (972) 852-1000 Tel (972) 852-1001 Fax info.ssn@siemens.com ht t p: // www. ic n. si em e ns .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Siemens SpeedStream 6500 Series è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Siemens SpeedStream 6500 Series - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Siemens SpeedStream 6500 Series imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Siemens SpeedStream 6500 Series ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Siemens SpeedStream 6500 Series, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Siemens SpeedStream 6500 Series.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Siemens SpeedStream 6500 Series. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Siemens SpeedStream 6500 Series insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.