Manuale d’uso / di manutenzione del prodotto MC35 del fabbricante Siemens
Vai alla pagina of 256
Siemens Cellular Engines MC35 Module MC35 Terminal Version: 05.00 DocID: MC35 _ATC_01_V0 5.00.
AT C ommand Set MC35_AT C_01_V05.00 Page 2 of 256 15.07.2002 Docum ent Name: AT C o m m a n d S e t Siemens Cellular Engines Versio n: 05.00 Date: July 15, 2 002 Doc Id: MC 35_ATC_01_V0 5.
AT C ommand Set MC35_AT C_01_V05.00 Page 3 of 256 15.07.2002 Contents 0 Version History ............................................................................................. 9 1 Introduction ....................................................
AT C ommand Set MC35_AT C_01_V05.00 Page 4 of 256 15.07.2002 2.34 AT &D Set circuit Data T erminal Read y (DTR) functio n m ode ...............................................38 2.35 AT &F Set all c urrent param et ers to manufac turer defaults .
AT C ommand Set MC35_AT C_01_V05.00 Page 5 of 256 15.07.2002 4.11 AT +CFUN Set phone function ality .........................................................................................78 4.11.1 W ake up the ME fr om SLEEP m ode ..................
AT C ommand Set MC35_AT C_01_V05.00 Page 6 of 256 15.07.2002 5.9 AT +CNMA New S MS m essage ack nowle dge to ME/T E, onl y phase 2+ ............................148 5.10 AT +CNMI New SMS me s sage indications ...........................................
AT C ommand Set MC35_AT C_01_V05.00 Page 7 of 256 15.07.2002 8.20 AT ^SNFD Set aud io param eters to manuf acturer def ault valu es ........................................ 206 8.21 AT ^SNFI Set m icrophone path param eters ...........................
AT C ommand Set MC35_AT C_01_V05.00 Page 8 of 256 15.07.2002 Figures Figure 1: AT audio pro gramm ing m odel ........................................................................................... .... 208 Tables Table 1: Produc t specif ic us e of AT comm ands .
AT C ommand Set MC35_AT C_01_V05.00 Page 9 of 256 15.07.2002 0 Version Histor y This chapter rep orts m odif ications and im provem ents over previo us versi ons of th e docum ent. "AT Com m and Set" Vers ion M C35- A TC_ 01_V04.00 => M C35- A TC _01_V05.
AT C ommand Set MC35_AT C_01_V05.00 Page 10 of 256 15.07.2002 SIM card (ME r eturns O K or ERROR depend ing on setting of AT^SM2 0). Statem ent about sen ding e-m ails via SMS c orrec ted: If not rec ognized b y provid er, @ m ay be replaced with “*”.
AT C ommand Set MC35_AT C_01_V05.00 Page 11 of 256 15.07.2002 "AT Com m and Set" Vers ion M C35- A TC_ 01_V03.02 => M C35- A TC _01_V04.0 0 Chapter Page AT command What is new 2.2 19 +++ Chapter rev ised. 2.5 21 ATD Param eters “G ” and “g” f or Closed Us er Group added.
AT C ommand Set MC35_AT C_01_V05.00 Page 12 of 256 15.07.2002 Notes m odified: If during a connecti on the radio c ell is changed, the p aram eters LAC , Cell, NCC BCC, PWR and RX Lev of the ‘Servin g Cell’ p art will n ot be up - dated. 8.7 194 AT^SC KS Notes regar ding em pty SIM c ard tray m odified.
AT C ommand Set MC35_AT C_01_V05.00 Page 13 of 256 15.07.2002 1 Introductio n 1.1 Scope of the document This docum ent presents th e AT Com m and Set for the Siem ens cell ular engin es MC35 M odule MC 35 Terminal The AT comm ands detaile d in this doc ument ar e supported b y both pro ducts.
AT C ommand Set MC35_AT C_01_V05.00 Page 14 of 256 15.07.2002 1.2 Supported product versions and related d ocuments Please n ote that this AT Com mand Set is inten ded for MC35 Vers ion 05.0 0 Related docu ments [1] MC35 Hard ware Interf ace Desc ription, Versio n 05.
AT C ommand Set MC35_AT C_01_V05.00 Page 15 of 256 15.07.2002 1.3 Conv entions Throughout the doc ument, the G SM eng ines are referr ed to as ME ( Mobile Equ ipment) , MS (Mob ile Station), TA ( Term inal Ada pter), DC E (Dat a Com municati on Equipm ent) or fac sim ile DCE (FAX m o- dem, F AX board).
AT C ommand Set MC35_AT C_01_V05.00 Page 16 of 256 15.07.2002 1.4.2 Combining AT commands on the same command line You ma y enter sever al AT comm ands on the same line. T his elim inates th e need to type the "AT" or "at" pref ix bef ore each co mmand.
AT C ommand Set MC35_AT C_01_V05.00 Page 17 of 256 15.07.2002 1.5 Supported character sets The ME s upports t wo char acter s ets: GSM 0 3.38 (7 b it, also r eferred t o as SMS alp habet) an d UCS2 (16 bit, ref er to ISO /IEC 10646) . See Ch apter 4.44 for inform ation about s elect ing the c haracter set.
AT C ommand Set MC35_AT C_01_V05.00 Page 18 of 256 15.07.2002 1.6 Flow control Flow co ntrol is ess entia l to pr event loss of data or avoi d errors when, in a data or f ax call, t he send ing device is transf erring data f aster tha n the rec eiving side is read y to accept.
AT C ommand Set MC35_AT C_01_V05.00 Page 19 of 256 15.07.2002 2 Standard V.25te r AT Command s Thes e AT Comm ands are r elated t o ITU-T (Inter national T elecom munic ation Uni on, Telecom m unica- tion sec tor) V.25ter docum ent. MC35 suppor ts the regist ers S0-S29.
AT C ommand Set MC35_AT C_01_V05.00 Page 20 of 256 15.07.2002 2.3 A TQn Flow control Execute command ATQ <n> Response OK Para meter <n> 0 AT Q0 No flow con trol 1 ATQ1 X ON/XOF F software .
AT C ommand Set MC35_AT C_01_V05.00 Page 21 of 256 15.07.2002 2.5 A TD Mobile originated call to dial a number Execute command ATD [<n>] [<mgsm ][;] This command c an be used to set up o utgoing v oice, data or fax calls . It al so serves to control supple mentary serv ices .
AT C ommand Set MC35_AT C_01_V05.00 Page 22 of 256 15.07.2002 Reference V.25ter/G SM 07.07 Note · Before s etting up a data c all, chec k that RT S/CT S hands hake is enabled. See Chapters 1.6 and 2.3 . · Param eter ”l“ and ”i“ onl y if no *# cod e is with in the dial s tring.
AT C ommand Set MC35_AT C_01_V05.00 Page 23 of 256 15.07.2002 2.6 A TD ><mem><n> Originate call to phone number <n> in memo ry <mem> This comm and allows you to di al a p hone num ber from a specif ic phonebook .
AT C ommand Set MC35_AT C_01_V05.00 Page 24 of 256 15.07.2002 <mgsm > I Activates C LIR (d isables pres entation of own pho ne n umber to calle d part y) i Deactivat es CLIR ( enables presentat ion of o wn phone num ber to called par ty) <;> Only requir ed to set up vo ice cal ls.
AT C ommand Set MC35_AT C_01_V05.00 Page 25 of 256 15.07.2002 2.7 A TD ><n> Originate call to phone number sele cted from active memory This command c an be used to dial a ph one num ber selected f rom the ac tive me mor y. The active mem ory is the phonebook selec ted with AT +CPB S (see Chap ter 4.
AT C ommand Set MC35_AT C_01_V05.00 Page 26 of 256 15.07.2002 2.8 A TD ><str> Originate call to phone number in memory with correspond- ing field This command s earches the ac tive phone book for a given s tring <str> and dials t he assign ed phone number .
AT C ommand Set MC35_AT C_01_V05.00 Page 27 of 256 15.07.2002 2.9 A TDI Mobile originated call to dial able ISDN number <n> Execute command ATDI<n >[;] TA attem pts to set up an outgo ing call to ISDN num ber. Note: This comm and ma y be a borted ge nerall y by recei ving a c haracter d uring executio n.
AT C ommand Set MC35_AT C_01_V05.00 Page 28 of 256 15.07.2002 2.10 ATDL Redial last telephone number used Execute command ATDL[;] This comm and redials the l ast voic e an d data ca ll nu m ber used in the AT D com- mand.
AT C ommand Set MC35_AT C_01_V05.00 Page 29 of 256 15.07.2002 2.11 ATE Enable command echo Write comm and ATE[< value>] This setting d eterm ines wheth er or not the TA ech oes character s rece ived f rom TE during c omm and state. Response OK Para meter <value > 0 Echo m ode of f 1 Ec ho m ode on Reference V.
AT C ommand Set MC35_AT C_01_V05.00 Page 30 of 256 15.07.2002 2.13 ATI Display product identification information Execute command ATI Response ME iss ues prod uct inf ormation text SIEMENS MC3 5 REVISION xx.yy OK Explanat ion of “Revis ion“ p aram eter: Versio n xx and varian t yy o f s oftware rele ase.
AT C ommand Set MC35_AT C_01_V05.00 Page 31 of 256 15.07.2002 2.15 ATL Set monitor speaker loudness Execute command ATL[va l] Response OK Reference V.25ter Note · The two c omm ands AT L and ATM ar e im plem ented onl y for V.25t er com patibil- ity reasons and have no ef fec t.
AT C ommand Set MC35_AT C_01_V05.00 Page 32 of 256 15.07.2002 2.18 ATQ Set result code presentation mode Write comm and ATQ [<n>] Response Specifies whether or not the T A transm its an y result c ode to the T E. Infor mation text transm itted in respo nse is n ot aff ected b y this setting.
AT C ommand Set MC35_AT C_01_V05.00 Page 33 of 256 15.07.2002 2.21 ATS3 Write comm and line term ination charact er Read command ATS3? Response < n > OK Write comm and ATS3= <n> This param eter setting deter m ines the charac ter r ecogni zed b y TA to ter minate an incom ing com m and line.
AT C ommand Set MC35_AT C_01_V05.00 Page 34 of 256 15.07.2002 2.24 ATS6 Set pause before blind dialling Read command ATS6? Response <n> OK Write comm and ATS6= <n> No e ffect for G SM Response OK Parameter <n> 000 -2 55 num ber of seconds to wait before blin d dial ling.
AT C ommand Set MC35_AT C_01_V05.00 Page 35 of 256 15.07.2002 2.27 ATS10 Set disconne ct delay after indicating the absence of data carri er Read command ATS10? Response <n> OK Write comm and ATS10= <n> This param eter setting deter mines the am ount of tim e, th at the T A rem ains con - nected in abse nce of a data carrier.
AT C ommand Set MC35_AT C_01_V05.00 Page 36 of 256 15.07.2002 2.30 ATV Set result code format mode Write comm and ATV[< value>] Response This param eter setting determ ines the cont ents of the header a nd trailer trans mit- ted with res ult co des and inf ormation res ponses.
AT C ommand Set MC35_AT C_01_V05.00 Page 37 of 256 15.07.2002 2.32 ATZ Set all current p arame ters to user def ined profile Execute command ATZ [<value >] Response TA sets all cur rent param eters to the user prof ile stor ed with AT&W (s ee Chapter 2.
AT C ommand Set MC35_AT C_01_V05.00 Page 38 of 256 15.07.2002 2.34 AT&D Set circuit Dat a Te rminal Ready (DTR) function mode Write comm and AT&D[< value>] Response This comm and is only inte nded f or data ca lls.
AT C ommand Set MC35_AT C_01_V05.00 Page 39 of 256 15.07.2002 2.35 AT&F Set all current parameter s to manufact urer defaults Execute command AT&F[va lue] Response TA sets all curren t par ameters to the m anufac turer defined prof ile. OK Parameter <value > 0 Set all T A param eters to manuf acturer defau lt.
AT C ommand Set MC35_AT C_01_V05.00 Page 40 of 256 15.07.2002 Category Command and factory setting GSM 07.0 7 comm ands for G PRS +CGDCONT AT&F clears e very contex t which is not ac tive or not online. +CGQREQ AT &F c lears the Q oS prof iles of ever y context which is not active or not onli ne.
AT C ommand Set MC35_AT C_01_V05.00 Page 41 of 256 15.07.2002 2.36 AT&S Set circ uit Data Set Rea dy (DSR) function mode Write comm and AT&S< valu e> Response This param eter determ ines how t he TA sets circuit 107 (DSR) depend ing on t he comm unication s tate of the T A interfac ing TE.
AT C ommand Set MC35_AT C_01_V05.00 Page 42 of 256 15.07.2002 2.37 AT&V Display current configuration Execute command AT&V[< n>] Response TA retur ns the curr ent param eter setting. The c onfigur ation var ies depend ing on whether or no t PIN aut hen tication h as been d one, or Multip lex m ode has been activate d.
AT C ommand Set MC35_AT C_01_V05.00 Page 43 of 256 15.07.2002 2.38 AT&W Store current configur ation to user defined profile Execute command AT&W [<n>] TA stor es the curr ent sett ings to a user def ined pr ofile in t he non- volatile m em ory.
AT C ommand Set MC35_AT C_01_V05.00 Page 44 of 256 15.07.2002 2.39 AT+GCA P Request complete TA capabilit ies list Test command AT+G CAP=? Response OK Para meter Execute command AT+G CAP Response TA repor ts a list of addit ional capab ilities. +GCAP : <na me> OK Para meter <name> e.
AT C ommand Set MC35_AT C_01_V05.00 Page 45 of 256 15.07.2002 2.42 AT+GMR R equest TA re vision identif ication of soft ware status Test command AT+G MR=? Response OK Execute command AT+G MR Response TA retur ns produc t soft ware ver sion id entif icatio n text.
AT C ommand Set MC35_AT C_01_V05.00 Page 46 of 256 15.07.2002 2.44 AT+ILRR Set TE-T A local rate reporting Test command AT+ILRR =? Response +ILRR: (l ist of s upported <value> s ) OK Para meter .
AT C ommand Set MC35_AT C_01_V05.00 Page 47 of 256 15.07.2002 2.45 AT+IPR Set fixed local rate Test command AT+IPR =? Response +IPR: (lis t of supported auto-d etectabl e <rate>s ) , (lis t of s.
AT C ommand Set MC35_AT C_01_V05.00 Page 48 of 256 15.07.2002 Generall y, AT + I P R = x shou ld be us ed as a s tandalon e comm and. If nevertheless combinat ions with other com mands on the same line cannot be avo ided, th ere are severa l constra ints to be c onsider ed: · Avoid c om binations with the AT com mands listed in Chapt er 1.
AT C ommand Set MC35_AT C_01_V05.00 Page 49 of 256 15.07.2002 3 AT C ommands for F A X The f ollowing com m ands can be use d for F AX transmis sion. If the M E is acting a s a Fax modem to a PC-base d applic ation (e .g. “W inFax “) it is nec essar y to selec t the prop er Ser vice Clas s (Fax Class) provide d by the ME.
AT C ommand Set MC35_AT C_01_V05.00 Page 50 of 256 15.07.2002 3.2 A T+FB ADMUL Error Threshold M ultiplier Read command AT+F BADMUL ? This comm and defines the “Cop y-Qual ity-OK” multipl ier. T he num ber of lines received with a bad pix el c ount is m ultiplie d by this num ber.
AT C ommand Set MC35_AT C_01_V05.00 Page 51 of 256 15.07.2002 3.4 A T+FCIG Query or set t he Local polling id Test command AT+F CIG =? Response (max . length of Loc al Pol ling ID str ing) (rang e of .
AT C ommand Set MC35_AT C_01_V05.00 Page 52 of 256 15.07.2002 3.6 A T+FCQ Copy Quality Checking Test command AT+F CQ =? This comm and controls Copy Qu alit y check ing when r eceivin g a fax.
AT C ommand Set MC35_AT C_01_V05.00 Page 53 of 256 15.07.2002 3.8 A T+FDCC Quer y or set cap abilities Test command AT+FDCC =? This comm and allows th e c onnected a pplicat ion to sense a nd cons train th e capabil ities of the facs imile DCE (= ME), fr om the c hoices define d in CCIT T T.
AT C ommand Set MC35_AT C_01_V05.00 Page 54 of 256 15.07.2002 3.9 A T+FDFFC Data Compression Format Conv ersion Test command AT+F DFFC =? This param eter determ ines the ME r espons e to a m ism atch .
AT C ommand Set MC35_AT C_01_V05.00 Page 55 of 256 15.07.2002 3.10 AT+FDIS Query or set ses sion parameters Test command AT+F DIS =? This command all ows the c ontrolling ap plicati on to sens e and cons train the capabil ities us ed for the curr ent sess ion.
AT C ommand Set MC35_AT C_01_V05.00 Page 56 of 256 15.07.2002 3.11 AT+FDR Begin or cont inue phase C data r eception Execute command AT+FDR The +FDR c omm and init iates tr ansition to Phase C da ta recept ion. Response CONNECT or OK If error is relate d to ME f unctiona lity: ERROR Reference EIA PN-2388 Note Used for Faxclass 2 only 3.
AT C ommand Set MC35_AT C_01_V05.00 Page 57 of 256 15.07.2002 3.13 AT+FET End a page or document Write comm and AT+F ET=<p pm > This command indic ates th at the current pa ge or part ial page is complete. A n ERROR respo nse c ode res ults if this comm and is issued while the m ode is on- hook.
AT C ommand Set MC35_AT C_01_V05.00 Page 58 of 256 15.07.2002 3.16 AT+FMDL Identify Product Model Read command AT+F MDL? Send the m odel i dentific ation to the T A Response Gips y Soft Protocols tack OK Reference Siemens Note Used for Faxclass 2 only 3.
AT C ommand Set MC35_AT C_01_V05.00 Page 59 of 256 15.07.2002 3.19 AT+FPHCTO DTE Phase C R esponse Timeout Read command AT+FPHCT O? The tim e-out va lue <tout > determ ines ho w long th e DCE will wai t for a c omm and after r eaching t he en d of data when tr ansm itting in Phas e C.
AT C ommand Set MC35_AT C_01_V05.00 Page 60 of 256 15.07.2002 3.22 AT+FRM Receiv e Data Test command AT+F RM=? Response (List of support ed modula tion m odes <mod> s) OK Parameter See write com m and Write comm and AT+F RM=<m od > This command c auses the T A to enter the recei ver-m ode us ing the modulat ion defined below.
AT C ommand Set MC35_AT C_01_V05.00 Page 61 of 256 15.07.2002 3.25 AT+FTM Transmit D ata Test command AT+F TM=? Response (List of support ed modula tion m odes) OK Parameter See write com m and Write comm and AT+F TM=<m od> This comm and causes the TA to tr ansm it data usi ng the m odulation m ode d e- fined belo w.
AT C ommand Set MC35_AT C_01_V05.00 Page 62 of 256 15.07.2002 3.27 AT+FVRFC Vert ical resolution format conv ersion Test command AT+F VRFC =? This comm and determ ines the DCE respons e to a m ism atch between th e vertic al resolut ion negot iated for the f acsim ile s ession and the P hase C d ata des ired b y the DTE.
AT C ommand Set MC35_AT C_01_V05.00 Page 63 of 256 15.07.2002 4 AT C ommands originating fr om GSM 07.0 7 Thes e AT Comm ands are acc ording to ET SI (European T elecom m unications Standards Ins titute) GSM 07.
AT C ommand Set MC35_AT C_01_V05.00 Page 64 of 256 15.07.2002 4 . 2 AT+ C AL A S e t a l a r m t i me Test command AT+CAL A=? Tes t command r eturns sup ported ar ray ind ex valu es <n> , al arm types <ty pe> , and max imum length of the text <tleng th> to b e outp ut.
AT C ommand Set MC35_AT C_01_V05.00 Page 65 of 256 15.07.2002 Para meter <time> s tring t ype value; for mat is "yy/MM/dd,h h:mm :ss", wher e characters indicate year (t wo last dig its) , month, da y, hour, m inutes. E.g . 6 th of May 2001, 22:10:0 0 hours equals to “0 1/05/0 6,22:10: 00" (see also +CCLK).
AT C ommand Set MC35_AT C_01_V05.00 Page 66 of 256 15.07.2002 - F or ever y channel a dif ferent <te xt> par ameter can be s tored. - <t ext> will be output o n the sam e logica l chann el th e alarm was entered. If not in m ultiplex mode, <t ext> will be out put in depen dent of the r elated channel.
AT C ommand Set MC35_AT C_01_V05.00 Page 67 of 256 15.07.2002 4.3 A T+C AMM A ccumulated call meter maximum (A C Mmax) set or query Test command AT+CAM M=? Response OK Para meter Read command AT+CAM M? Response TA returns the curre nt ACMm ax val ue.
AT C ommand Set MC35_AT C_01_V05.00 Page 68 of 256 15.07.2002 4.4 A T+C A OC A dvice of Charge informat ion Test command AT+CAO C=? Response +CAOC: (list of supported <mod e>s ) OK Parameter See.
AT C ommand Set MC35_AT C_01_V05.00 Page 69 of 256 15.07.2002 4.5 A T+CBST Select bea rer serv ice type Test command AT+CB ST=? Response +CBST: ( list of support ed <speed> s ) ,(list of support.
AT C ommand Set MC35_AT C_01_V05.00 Page 70 of 256 15.07.2002 4.6 A T+ CCFC Call forwarding number and condi tions control Test command AT+CCFC=? Response +CCFC: (lis t/range of suppor ted <reas>.
AT C ommand Set MC35_AT C_01_V05.00 Page 71 of 256 15.07.2002 <class> integer or sum of integ ers each r epresentin g a <cla ss> of inform a- tion: 1 voice 2 data 4 fax 8 short m essage se.
AT C ommand Set MC35_AT C_01_V05.00 Page 72 of 256 15.07.2002 Remem ber that cal l for warding will be ac tivated for v oice, dat a and f ax (de- fault clas ses) when you register the dest ination n um ber.
AT C ommand Set MC35_AT C_01_V05.00 Page 73 of 256 15.07.2002 4.7 AT+CCLK Rea l Time Clock Test command AT+CCLK=? Response OK Read command AT+CCLK? Response +CCLK: <time> OK/ERROR/+CM E ERROR Pa.
AT C ommand Set MC35_AT C_01_V05.00 Page 74 of 256 15.07.2002 4.8 AT+CCUG: Clos ed User Group Test command AT+CCUG=? The T est comm and returns the s upporte d param eters.
AT C ommand Set MC35_AT C_01_V05.00 Page 75 of 256 15.07.2002 4.9 A T+CCW A Call waiting Test command AT+CCW A=? Response +CCWA: (lis t of supp orted <n> s) OK/ERROR/+CM E ERROR Para meter See w.
AT C ommand Set MC35_AT C_01_V05.00 Page 76 of 256 15.07.2002 Para meters of the URC <number> String t ype phone num ber of calling a ddress i n form at speci- fied b y <type> <type> T ype of addres s octet in in teger f orm at (refer to G SM 04.
AT C ommand Set MC35_AT C_01_V05.00 Page 77 of 256 15.07.2002 4.10 AT+CEER Extended error report Test command AT+CE ER=? Response OK Execute command AT+CE ER TA retur ns an ex tended error r eport of the reas on for the las t call re lease a nd location.
AT C ommand Set MC35_AT C_01_V05.00 Page 78 of 256 15.07.2002 4.11 AT+CFUN Set phone functionality Test command AT+CFUN=? Response +CFUN: (lis t of support ed < fun > s), (list of supp orted <.
AT C ommand Set MC35_AT C_01_V05.00 Page 79 of 256 15.07.2002 1 Full f unct ionalit y. If the ME is in one of the t wo CYCLIC SLEE P modes you can issue AT +CFUN=1 t o stop po wer savi ng and r eturn to full f unctional it y.
AT C ommand Set MC35_AT C_01_V05.00 Page 80 of 256 15.07.2002 Example 2 To set the M E to NON-C YCLIC SLEE P mode ent er AT+CFUN=0 OK W hen, for exam ple, an SM S is be ing rec eived and indicate d b y an un solicite d result code (URC), t he ME wak es up to f ull operation.
AT C ommand Set MC35_AT C_01_V05.00 Page 81 of 256 15.07.2002 4.11.1 Wake up the ME from SLEEP mode A wake- up event is an y event that s witches off the SLE EP m ode and ca uses th e ME to r eturn to f ull functiona lit y. In short, it tak es the ME back to AT+CF UN=1.
AT C ommand Set MC35_AT C_01_V05.00 Page 82 of 256 15.07.2002 4.12 AT+CGMI R equest manufacturer id entification Test command AT+CG MI=? Response OK Execute command AT+CG MI Response TA retur ns m anufac turer identific ation text. SIEMENS OK Reference GSM 07 .
AT C ommand Set MC35_AT C_01_V05.00 Page 83 of 256 15.07.2002 4.15 AT+CGSN Request product serial num ber identification (IMEI) i dentical to GSN Test command AT+CG SN=? Response OK Execute command AT+CGSN Response TA retur ns identif ication text for determ inatio n of the in divid ual ME.
AT C ommand Set MC35_AT C_01_V05.00 Page 84 of 256 15.07.2002 4.17 AT+CHUP Ha ng up call Test command AT+CHUP=? Response OK Execute command AT+CHUP Cancels all acti ve an d held calls. Response OK/ERROR Reference GSM 07 .07 Note AT+CHUP im plem ents the sam e behav iour as AT H (s ee Chapt er 2.
AT C ommand Set MC35_AT C_01_V05.00 Page 85 of 256 15.07.2002 4.19 AT+CIND Indicator control MC35 suppor ts ind icator even t report ing for th e follo wing item s: battery capac ity, s ignal qual it .
AT C ommand Set MC35_AT C_01_V05.00 Page 86 of 256 15.07.2002 Read command AT+CIND? Response TA returns the s tatus of the ME in dicators . +CIND: <ind>[,<ind>[,...]] OK If error is relate d to ME f unctiona lity +CME ERROR: <err> Para meter See Tes t comm and Write comm and AT+CIND = [<sta t>[,<st at> [,.
AT C ommand Set MC35_AT C_01_V05.00 Page 87 of 256 15.07.2002 4.20 AT+CLCC List current calls of M E Test command AT+CLCC =? Response OK Para meters Execute command AT+CLCC Response TA retur ns a lis t of cur rent calls of ME. If comm and su ccessf ul, but no calls ar e availab le, no inf orm ation re sponse is s ent to T E.
AT C ommand Set MC35_AT C_01_V05.00 Page 88 of 256 15.07.2002 4.21 AT+CLCK Facility lo ck Test command AT+CLCK =? Response +CLCK : ( list of supporte d <fa c>s) OK Para meter See execute com m a.
AT C ommand Set MC35_AT C_01_V05.00 Page 89 of 256 15.07.2002 Facto ry set SIM lo cks “PF” loc k Phone to the ver y First SIM car d “PN” Network Persona lisatio n “PU” Network subset Pers .
AT C ommand Set MC35_AT C_01_V05.00 Page 90 of 256 15.07.2002 <class> integer or sum of integ ers each r epresentin g a <cla ss> of inform ation: 1 voice 2 data 4 fax 8 short m essage ser .
AT C ommand Set MC35_AT C_01_V05.00 Page 91 of 256 15.07.2002 4.21.2 Examples: Phone loc k Example 1 Be sure that PIN 1 authent ication is valid: AT+CPIN? +CPIN: SIM PIN OK AT+CPIN=9999 OK To loc k th.
AT C ommand Set MC35_AT C_01_V05.00 Page 92 of 256 15.07.2002 AT+CPIN? Enter SIM PI N of pr esent S IM card. +CPIN: SIM PIN AT+CPIN=1111 OK SIM PIN ac cepted.
AT C ommand Set MC35_AT C_01_V05.00 Page 93 of 256 15.07.2002 4.21.3 Examples : Call barrin g Please n ote that when you conf igure or quer y call bar ring with out sp ecif ying any classes , the sett ings will refer to clas ses 1, 2 an d 4 onl y (defau lt settin g).
AT C ommand Set MC35_AT C_01_V05.00 Page 94 of 256 15.07.2002 4.22 AT+CLIP Calling line identification presen tation This command r efers to the GSM supplem entar y service CLI P (Callin g Line Iden t.
AT C ommand Set MC35_AT C_01_V05.00 Page 95 of 256 15.07.2002 4.23 AT+CLIR C alling line identification r estriction ( by *# sequence) The AT +CLIR com mand is not supporte d.
AT C ommand Set MC35_AT C_01_V05.00 Page 96 of 256 15.07.2002 4.24 AT+CLVL Loudspeaker v olume lev el Test command AT+CLV L=? Response +CLVL : ( list of suppor ted <le vel>s ) OK Read command AT.
AT C ommand Set MC35_AT C_01_V05.00 Page 97 of 256 15.07.2002 4.25 AT+CMEE Report mobile equipment erro r Test command AT+CM EE=? Response +CMEE: (list of suppor ted <n> s ) OK Parameter See wri.
AT C ommand Set MC35_AT C_01_V05.00 Page 98 of 256 15.07.2002 4.26 AT+CMER Mobile equipment event reporting Test command AT+CME R=? Response +CMER: ( list of s upported <mod e> s),(list of suppo.
AT C ommand Set MC35_AT C_01_V05.00 Page 99 of 256 15.07.2002 "signal" Sig nal q ualit y (0-7 or 99 if n ot m easurable). T he indicate d value is the bi t error rate of th e signal received. See a lso Chapt er 4.46. " service" Servi ce availabili ty (0-1).
AT C ommand Set MC35_AT C_01_V05.00 Page 100 of 256 15.07.2002 4.27 AT+CMUT Mute c ontrol Test command AT+CMUT =? Response +CMUT : ( list of supporte d <n>s ) OK Read command AT+CMUT ? Response .
AT C ommand Set MC35_AT C_01_V05.00 Page 101 of 256 15.07.2002 4.28 AT+CM UX Enter multiplex mode MC35 supp orts Mu ltiplex m ode accor ding to the G SM 07 .10 Mu ltiplex er Protoc ol a nd enabl es one physic al serial async hronous interf ace to be partition ed into three v irtual c hannels .
AT C ommand Set MC35_AT C_01_V05.00 Page 102 of 256 15.07.2002 turns to t he AT comm and mode. 3. T here are var ious options t o switch f rom data m ode to com mand m ode: a) Escape seq uence + ++ b) Circuit 108 /2 (DT R) change s from ON to OFF, r eaction dep ends o n comm and at&d (c aution if AT&D0: T A ignores status on DT R).
AT C ommand Set MC35_AT C_01_V05.00 Page 103 of 256 15.07.2002 Command Behaviour on channel 1 Differences on channel 2+3 ATS8 1 ) as desc ribed not usabl e ATS10 1 ) as des cribed not usa ble ATS18 1 .
AT C ommand Set MC35_AT C_01_V05.00 Page 104 of 256 15.07.2002 4.29 AT+COPN R ead operator names Test command AT+CO PN=? Response OK Execute command AT+COPN TA retur ns the list of operator nam es from the ME. Each oper ator code < nu- m ericn> that has an al phanum eric equi valen t <alpha n> in t he ME m em ory is returned.
AT C ommand Set MC35_AT C_01_V05.00 Page 105 of 256 15.07.2002 4.30 AT+COPS Operat or selection This comm and can be us ed to qu ery the prese nt stat us of the ME's net work registratio n and to de- term ine whether au tom atic or m anual net work s electio n shall b e used.
AT C ommand Set MC35_AT C_01_V05.00 Page 106 of 256 15.07.2002 Response OK If error is relate d to ME f unctiona lity: +CME ERROR: <err> Parameters <mod e> 0 autom atic m ode; <oper >.
AT C ommand Set MC35_AT C_01_V05.00 Page 107 of 256 15.07.2002 4.31 AT+CPA S Mobile equipment act ivity status Test command AT+CPA S=? Response +CPAS: (list of supported <pas> s) OK Parameter See execute com m and Execute command AT+CP AS Response TA returns the activit y status of ME.
AT C ommand Set MC35_AT C_01_V05.00 Page 108 of 256 15.07.2002 4.32 AT+CPBR Read current phonebook entries Test command AT+CP BR=? Response TA retur ns location r ange s upport ed by the cur rent sto rage as a com pound value and the m axim um length of <nu mber> and <t ext> fields.
AT C ommand Set MC35_AT C_01_V05.00 Page 109 of 256 15.07.2002 4.33 AT+CPBS Select phonebook memory storage Test command AT+CPB S=? Response +CPBS: ( list of supporte d <storage> s ) OK If error.
AT C ommand Set MC35_AT C_01_V05.00 Page 110 of 256 15.07.2002 4.34 AT+CPBW Write phonebook entry Test command AT+CP B W =? Response TA retur ns loca tion ra nge support ed b y the curr ent stor age, th e max imum length of <number> field, supported n um ber form ats of the st orage a nd the maxim um length of <text > field.
AT C ommand Set MC35_AT C_01_V05.00 Page 111 of 256 15.07.2002 4.35 AT+CPIN Enter PIN Test command AT+CPIN =? Response OK Read command AT+CPIN ? Response TA returns an alpha num eric string ind icating whet her or not a password is re- quired.
AT C ommand Set MC35_AT C_01_V05.00 Page 112 of 256 15.07.2002 PH-NET PIN ME is waiting f or networ k per sonalis ation pas s- word PH-NET PUK ME is waiti ng for net work personal isation un- block in.
AT C ommand Set MC35_AT C_01_V05.00 Page 113 of 256 15.07.2002 MC35 off ers var ious option s to ver ify the pres ent stat us of network registra- tion: For ex am ple, the AT +COPS ? (Chapter 4 .30) co mm and indicates the currentl y used net work. W ith AT+CR EG (Cha pter 4.
AT C ommand Set MC35_AT C_01_V05.00 Page 114 of 256 15.07.2002 4.35.1 What to do if PIN or password auth entication fails? PIN1 / PUK1: After thr ee failur es to ente r PIN 1, the SI M card is block ed (ex cept for emergenc y calls).
AT C ommand Set MC35_AT C_01_V05.00 Page 115 of 256 15.07.2002 SIM lock s: T hese ar e factor y set l ock s, such as "PF", "PN", " PU", "P P", "PC ". An 8-digit u nloc king code is req uire d to operat e the m obile wit h a dif ferent SIM c ard, or to lift the lock .
AT C ommand Set MC35_AT C_01_V05.00 Page 116 of 256 15.07.2002 4.36 A T +CPIN2 Enter PIN 2 Test command AT+CPIN 2=? Response OK Read command AT+CPIN 2? Response TA retur ns an alpha num eric str ing indicat ing whet her som e pass word is requ ired or not.
AT C ommand Set MC35_AT C_01_V05.00 Page 117 of 256 15.07.2002 Once the re quir ed <pin > ha s been ent ered corr ectl y, PIN2 authe nticatio n code changes t o READ Y. Af ter 300s , a repet ition of the auth enticatio n proces s is re- quired ( PIN2 auth entic ation c ode changes from READ Y to SI M PIN2).
AT C ommand Set MC35_AT C_01_V05.00 Page 118 of 256 15.07.2002 4.37 A T +CPUC Price per unit and currency table Test command AT+CPUC =? Response OK Read command AT+CPUC ? Response Read comm and retur ns the current param eters of PUC .
AT C ommand Set MC35_AT C_01_V05.00 Page 119 of 256 15.07.2002 4.38 AT+CPWD Change pass word Use this com m and when you want to · change PIN 1 or PIN 2 · change the pass word supp lied fr om your provider for c all barri ng · set indi vidua l phone s ecurit y pass words See Chapt ers 4.
AT C ommand Set MC35_AT C_01_V05.00 Page 120 of 256 15.07.2002 concerned, e.g. pro vider, o perator, dis tribut or etc. o n the one side and t he manuf acturer on the other side.
AT C ommand Set MC35_AT C_01_V05.00 Page 121 of 256 15.07.2002 Example 3 To c hange the "P S" lock pa ssword, us ing th e correc t old pass word: AT+CPWD=PS,1111,2222 (where 111 1 = old "P S" pas sword and 2222 = new pass word) To s pecif y a n ew "P S" loc k passwor d, after t he ol d pass word was d isable d, e.
AT C ommand Set MC35_AT C_01_V05.00 Page 122 of 256 15.07.2002 4.39 AT+CR Serv ice reporting control Test command AT+CR=? Response +CR : (lis t of supp orted <mode> s) OK Para meter See write co.
AT C ommand Set MC35_AT C_01_V05.00 Page 123 of 256 15.07.2002 4.40 A T+ CRC Set Cellular Result Codes for incoming call indication Test command AT+CRC=? Response +CRC: (lis t of suppor ted <mode&g.
AT C ommand Set MC35_AT C_01_V05.00 Page 124 of 256 15.07.2002 4.41 AT+CREG N etwork registration Test command AT+CREG =? Response +CREG: (lis t of supp orted <n> s) OK Para meter See write com .
AT C ommand Set MC35_AT C_01_V05.00 Page 125 of 256 15.07.2002 Unsolicit ed result code If <n>=1 a nd there is a ch ange in the ME networ k r egistration st atus: +CREG: <s tat> If <n&g.
AT C ommand Set MC35_AT C_01_V05.00 Page 126 of 256 15.07.2002 4.42 AT+CRLP Select radio link protocol para m. for orig. non-transparent data call Test command AT+CRLP=? Response TA retur ns values suppor ted b y the T A as a com pound value.
AT C ommand Set MC35_AT C_01_V05.00 Page 127 of 256 15.07.2002 4.43 AT+CR SM Restrict ed SIM access Test command AT+CRSM= ? Response OK Write comm and AT+CRSM= <com m and>[,<fileId > [,<P 1>,<P 2>,< P3> [,<data>]]] By usin g this c omm and the T E has acc ess to the SIM data base.
AT C ommand Set MC35_AT C_01_V05.00 Page 128 of 256 15.07.2002 4.44 AT+CSC S Set TE charact er set Test co mmand AT+CSC S=? Response +CSCS : (l ist of s upported < chset >s) OK Read command AT+C.
AT C ommand Set MC35_AT C_01_V05.00 Page 129 of 256 15.07.2002 4.45 AT+CSNS Single N umbering Sch eme The AT +CSNS c omm and enables the ME to ac cept inc om ing calls when no be arer c apabilit y inf or- ma tion is provid ed with th e call, e .g. singl e num bering schem e calls or calls or iginit ating fr om analog devices .
AT C ommand Set MC35_AT C_01_V05.00 Page 130 of 256 15.07.2002 4.46 AT+CSQ Signal qual ity Test command AT+CSQ =? Response +CSQ: (l ist of s upported <r ssi> s ), ( list of supp orted <be r&g.
AT C ommand Set MC35_AT C_01_V05.00 Page 131 of 256 15.07.2002 4.47 AT+CSSN Supplementary ser vice notifications Test command AT+CS SN=? Response +CSSN : (l ist of s upported <n> s), (list of su.
AT C ommand Set MC35_AT C_01_V05.00 Page 132 of 256 15.07.2002 4.48 AT+CUSD Unstructured supplementary service data Test command AT+CUSD =? Response +CUSD: (list of supported <n> s) OK Parameter See write com m and Read command AT+ CUSD ? Response TA returns the cu rrent <n> value.
AT C ommand Set MC35_AT C_01_V05.00 Page 133 of 256 15.07.2002 4.49 AT+VTD=<n> Tone duration Test command AT+VT D=? This command r efers to an integer <d uration> that d ef ines the length of tones tr ansm itted with th e +VTS c omm and.
AT C ommand Set MC35_AT C_01_V05.00 Page 134 of 256 15.07.2002 4.51 AT+WS46 Sele ct wire less net work Test command AT+W S46=? Response (list of support ed <n>s ) OK Read command AT+W S46? Respo.
AT C ommand Set MC35_AT C_01_V05.00 Page 135 of 256 15.07.2002 5 AT co mmands originating fr om GSM 07.0 5 for SMS The SMS rel ated AT Comm ands ar e according to th e GSM 07.05 s pecific ation is sued b y ETSI (Euro- pean T elecomm unic ations Stan dards I nstitute) .
AT C ommand Set MC35_AT C_01_V05.00 Page 136 of 256 15.07.2002 5.2 A T+CMGD Delet e SMS message Test command AT+CMGD= ? Response OK Parameter Execute command AT+CMG D= <index > Response TA deletes m es sage from pref erred m essage stor age <mem1> location <in- dex> .
AT C ommand Set MC35_AT C_01_V05.00 Page 137 of 256 15.07.2002 5.4 A T+CMGL List SMS messages f rom prefe rred store Test command AT+CMG L=? Response +CMGL: (list of supported <sta t>s ) OK Para.
AT C ommand Set MC35_AT C_01_V05.00 Page 138 of 256 15.07.2002 for SMS- COMMAN Ds: +CMGL: <index >,<sta t>,<fo >,<ct>[<CR ><LF > +CMGL: < index>,<stat>,< fo>,<ct> [.
AT C ommand Set MC35_AT C_01_V05.00 Page 139 of 256 15.07.2002 the associ ated m emor y <mr > GSM 03.40 T P-Mes sage-R eferenc e in integ er form at <oa> GSM 03.
AT C ommand Set MC35_AT C_01_V05.00 Page 140 of 256 15.07.2002 5.5 A T+CMGR Read SM S message Test command AT+CMGR= ? Response OK Execute command AT+CMG R= <index > Para meter <index> inte.
AT C ommand Set MC35_AT C_01_V05.00 Page 141 of 256 15.07.2002 <ct> G SM 03.4 0 TP-Com m and-Type in int eger f ormat ( default 0) <da> G SM 03.
AT C ommand Set MC35_AT C_01_V05.00 Page 142 of 256 15.07.2002 <pid> G SM 03.40 T P-Protoc ol-Id entifier in int eger for mat ( default 0) <ra> GSM 03.
AT C ommand Set MC35_AT C_01_V05.00 Page 143 of 256 15.07.2002 5.6 A T+CMGS Send SMS message Test command AT+CMG S=? Response OK Parameter Execute command 1) If tex t mode ( +CMGF=1): +CMG S=<da>.
AT C ommand Set MC35_AT C_01_V05.00 Page 144 of 256 15.07.2002 Reference GSM 07 .05 Note · After in voking t he comm ands CMGW , CMGS, CMGC wait for the prom pt ">" and th en start t o send t ext to t he modul e. · To s end the mes sage sim ply enter <CTR L-Z>.
AT C ommand Set MC35_AT C_01_V05.00 Page 145 of 256 15.07.2002 5.7 A T+CMGW Write SM S message t o memory Test command AT+CMGW =? Response OK Execute command 1) If tex t mode ( +CMGF=1): +CMGW [ =<.
AT C ommand Set MC35_AT C_01_V05.00 Page 146 of 256 15.07.2002 0 “REC UNR EAD” Received unre ad m essages ( default) 1 “REC R EAD” Recei ved read m es sages 2 “ST O UNSENT ” Store d unsent m es sages 3 “ST O SENT ” Store d sent m essages <pdu> In the cas e of SMS: G SM 0 4.
AT C ommand Set MC35_AT C_01_V05.00 Page 147 of 256 15.07.2002 5.8 A T+CMSS Send SMS message from storage Test command AT+CM SS=? Response OK Para meter Execute command +CMSS = <index >[,<da .
AT C ommand Set MC35_AT C_01_V05.00 Page 148 of 256 15.07.2002 5.9 A T+CNMA New SMS mess age ackno wledge to ME/TE, only phase 2+ Test command AT+CNM A=? Response 1) If tex t mode ( +CMGF=1): OK 2) If.
AT C ommand Set MC35_AT C_01_V05.00 Page 149 of 256 15.07.2002 5.10 AT+CNM I New SMS message indi cations Test command AT+CNMI =? Response +CNMI : (lis t of suppor ted <mode>s ), (list of suppor.
AT C ommand Set MC35_AT C_01_V05.00 Page 150 of 256 15.07.2002 2 SMS-DEL IVERs, exc ept cl ass 2 m essages and m essages i n the mes sage waitin g ind ication group (s tore m essage) are routed direc .
AT C ommand Set MC35_AT C_01_V05.00 Page 151 of 256 15.07.2002 Reference GSM 07 .05 General r emark s: · Parameters <m t>=2,3 and <ds>=1 ar e onl y availa ble with G SM phas e 2+ (s ee +CSMS=1 ). Incom ing SMs or Status Re ports ha ve to be ack nowledged with AT+CNM A=0 when us ing these p hase 2+ param eters.
AT C ommand Set MC35_AT C_01_V05.00 Page 152 of 256 15.07.2002 5.11 AT+CPM S Preferred SMS mes sage storag e Test command AT+CPM S=? Response +CPM S: (list of supported <mem 1>s ), (list of s up.
AT C ommand Set MC35_AT C_01_V05.00 Page 153 of 256 15.07.2002 “ME” an d ma y be transf erred to the “ SM” s torage if “ME” is use d up. Incom ing Class 2 m ess ages ( SIM specif ic) will be stor ed to the SIM car d onl y, no matter whether or not th ere is f ree “ME” s pace.
AT C ommand Set MC35_AT C_01_V05.00 Page 154 of 256 15.07.2002 5.12 AT+CSCA SMS serv ice centre address Test command AT+CSC A=? Response OK Read command AT+CSC A? Response +CSCA: <sca >,<tosc.
AT C ommand Set MC35_AT C_01_V05.00 Page 155 of 256 15.07.2002 5.13 AT+CSC B Select cell broadcast message s Test command AT+CSC B=? Response +CSCB : (lis t of supp orted <mode> s) Para meter Se.
AT C ommand Set MC35_AT C_01_V05.00 Page 156 of 256 15.07.2002 5.14 AT+CSD H Show SMS text mode p a rameters Test command AT+CSDH =? Response +CSDH : (lis t of s upported <sh ow> s) OK Para mete.
AT C ommand Set MC35_AT C_01_V05.00 Page 157 of 256 15.07.2002 5.15 AT+CSM P Set SMS t ext mode paramete rs Test command AT+CSM P=? Response OK Read command AT+CSM P? Response +CSMP :<fo>, <v.
AT C ommand Set MC35_AT C_01_V05.00 Page 158 of 256 15.07.2002 5.16 AT+CSM S Select Message Serv ice Test command AT+CSM S=? Response +CSMS : ( list of s upported <service> s) OK Para meter See .
AT C ommand Set MC35_AT C_01_V05.00 Page 159 of 256 15.07.2002 6 GPRS AT commands i n accorda nce w ith GSM 07.07 This chapter prov ides GP RS specif ic AT comm ands. For inf orm ation on usin g GPRS c omm ands in multiplex m ode see ch apter 4.28 . 6.
AT C ommand Set MC35_AT C_01_V05.00 Page 160 of 256 15.07.2002 6.1.2 AT+CGACT PD P context activ ate or deacti vate Test command AT+C GACT =? The tes t comm and is us ed f or requestin g inf orm ation on the s upporte d PDP context act ivation st ates.
AT C ommand Set MC35_AT C_01_V05.00 Page 161 of 256 15.07.2002 6.1.3 AT+CGDATA Enter data state Test command AT+CG DATA=? The tes t comm and is us ed for r equesting inform ation o n the sup ported la yer 2 protocols t o be use d bet ween the T E and MT .
AT C ommand Set MC35_AT C_01_V05.00 Page 162 of 256 15.07.2002 6.1.4 A T+ CGDCONT Define P DP Context Test command AT+CGDCONT=? The tes t comm and returns values s upporte d as a co mpound va lue. If the MT s upports se veral PDP t ypes, the param eter val ue ranges f or e ach <P DP_ty pe> a re ret urn ed on a separa te lin e.
AT C ommand Set MC35_AT C_01_V05.00 Page 163 of 256 15.07.2002 <PDP_type> Pac ket Data Protocol t ype is a string par ameter which specif ies the t ype of pack et data pr otocol: IP Internet Pro.
AT C ommand Set MC35_AT C_01_V05.00 Page 164 of 256 15.07.2002 6.1.5 A T+CGQMIN Quality of Serv ice Profile (Minimum acceptable) Test command AT+CGQMI N=? The tes t comm and returns values s upporte d as a co mpound va lue. If the MT s upports sever al PD P types, t he par ameter value ranges for eac h PDP ty pe are retu rned on a sepa rat e line .
AT C ommand Set MC35_AT C_01_V05.00 Page 165 of 256 15.07.2002 Para meter <cid> num eric PDP C ontext Ident ifier; if no cid is s pecif ied, nothing will be c hanged ( no profile defin ition / u.
AT C ommand Set MC35_AT C_01_V05.00 Page 166 of 256 15.07.2002 <pea k> numeric par ameter for the peak throug hput clas s 0 network subs cribed val ue Peak Thro ughput Class Pe ak Thr oughput (i.
AT C ommand Set MC35_AT C_01_V05.00 Page 167 of 256 15.07.2002 at+cgqm i n=1,0,0,0,1 OK at+cgqm in? +CGQMIN:1,0,0,0 ,1,0 OK at+cgqm i n=1,1 OK at+cgqm in? +CGQMIN:1,1,0,0 ,1,0 OK Response OK/ERROR/+CM E ERROR Reference GSM 07 .
AT C ommand Set MC35_AT C_01_V05.00 Page 168 of 256 15.07.2002 6.1.6 A T+CGQREQ Quality of Service Profile ( Requested) Test command AT+CG QREG= ? The tes t comm and retur ns va lues su pported as a com poun d value. If the MT supports s everal PDP t ypes, the param eter va lue ra nges f or each PDP t ype are return ed on a separat e line.
AT C ommand Set MC35_AT C_01_V05.00 Page 169 of 256 15.07.2002 <precedence> num eric par ameter for the pr ecedence c lass 0 network subs cribed val ue 1 High Pr iorit y Service c omm itm ents s.
AT C ommand Set MC35_AT C_01_V05.00 Page 170 of 256 15.07.2002 <pea k> numeric par ameter for the peak throug hput clas s 0 network subs cribed val ue Peak Thro ughput Class Pe ak Throu ghput (in octets per secon d) 1 Up to 1 0 00 (8 k bit/s). 2 Up to 2 0 00 (16 k bit/s) .
AT C ommand Set MC35_AT C_01_V05.00 Page 171 of 256 15.07.2002 at+cgqreq=1,0,0,1 OK at+cgqreq? +CGQREQ:1,0,0,1, 0,0 OK at+cgqreq= 1,1 OK at+cgqreq? +CGQREQ:1,1,0,1, 0,0 OK Definitions of param eters in GSM 02.6 0 and GS M 03.60 paragraph 15.2 “Qualit y of Servic e Profile“ .
AT C ommand Set MC35_AT C_01_V05.00 Page 172 of 256 15.07.2002 6.1.7 AT+CGSMS Select serv ice for MO SMS m essages Test command AT+CG SMS=? The tes t comm and lists th e services and ser vice prefer ences which can be selected with the AT+CG SMS write com m and.
AT C ommand Set MC35_AT C_01_V05.00 Page 173 of 256 15.07.2002 6.1.8 A T^SG AUTH Set type of authentication f or PPP connection Test command AT^SGAUT H=? Response ^SGAU TH: (lis t of supp orted <a .
AT C ommand Set MC35_AT C_01_V05.00 Page 174 of 256 15.07.2002 6.2 Modem compatibility commands to MTs supporting GPRS This subclause d escr ibes ho w existing AT c omm ands, desig ned for us e with a m odem , ma y be use d to contro l a GPR S MT. T his is to provide back wards compatib ilit y with ex isting c omm unications soft - ware.
AT C ommand Set MC35_AT C_01_V05.00 Page 175 of 256 15.07.2002 6.3.1 ATD *98# Request G PRS IP serv ice Execute command ATD*98[* <cid>] # This comm and causes the MT to p erf orm whate ver ac tions are necess ary to establis h a com munic ation bet ween the T E and t he exter nal PDN .
AT C ommand Set MC35_AT C_01_V05.00 Page 176 of 256 15.07.2002 6.3.2 A TH Manual rejection of a netw ork request for PDP context activation Execute command ATH Response The V.
AT C ommand Set MC35_AT C_01_V05.00 Page 177 of 256 15.07.2002 6.4 Using GPRS A T commands (examples) 6.4.1 M iscellaneous AT commands Defining a nd using a Conte xt Definit ion Id (CI D): Ever y time a CID is use d as a param eter f or a GPR S comm and the C ID has to be def ined before b y the AT +CGDCONT command.
AT C ommand Set MC35_AT C_01_V05.00 Page 178 of 256 15.07.2002 All param eters of the QoS ar e initiated b y default to th e "networ k s ubscribed val ue (= 0)" but t he QoS itself is set to b e undef ined. To def ine a QoS use th e AT+CG QREQ or AT+CGQ MIN com m and.
AT C ommand Set MC35_AT C_01_V05.00 Page 179 of 256 15.07.2002 6.5 Using the GPRS d ial command A TD In addition to the G PRS AT Comm ands you can use the "D" com mand to dial i nto to the GPRS net- work. There ar e two GPRS Servi ce Codes f or the AT D Comm and: Values 98 and 9 9.
AT C ommand Set MC35_AT C_01_V05.00 Page 180 of 256 15.07.2002 7 AT C ommands for SIM Application T oolkit (GSM 11.14) SIM Appl ication T oolk it (SAT ) is a tec hnolog y that le ts the SIM c ard ex ecute a great var iety of addi- tional app lica tions.
AT C ommand Set MC35_AT C_01_V05.00 Page 181 of 256 15.07.2002 7.1 A T^SST A Remote-SAT Interface A ctivation Test command AT^SST A=? Response ^SSTA:( list of support ed <s tate>s) , (list of suppor ted <alp habet>s ) Param eter descr iption se e belo w.
AT C ommand Set MC35_AT C_01_V05.00 Page 182 of 256 15.07.2002 7.2 ^SS TN Remote-S AT Notific ation Proacti ve Comm ands Ever y tim e the SIM applic ation issues a proac tive c om mand, via the M E, the T A will rece ive a notif ication. T his i ndicates the t ype of pro activ e comm and iss ued.
AT C ommand Set MC35_AT C_01_V05.00 Page 183 of 256 15.07.2002 7.3 AT^SSTG I Remote-S A T Ge t Information Test command AT^SST GI =? Response ^SSTG I:(list of supported <state>s ), (l ist of s u.
AT C ommand Set MC35_AT C_01_V05.00 Page 184 of 256 15.07.2002 7.4 A T^SSTR Remote-SA T Response Test command AT^SST R=? Response ^SSTR:(lis t of supporte d <state >s), ( list of supporte d <.
AT C ommand Set MC35_AT C_01_V05.00 Page 185 of 256 15.07.2002 8 Siemens define d A T com mands for enhanced functio ns Self-def ined c omm ands do not ha ve to be im plem ented in ac cordance with t he of ficial s yntax. T he “+C” str ing can theref ore be r eplaced b y “^S” (“ ^” = 0x 5E).
AT C ommand Set MC35_AT C_01_V05.00 Page 186 of 256 15.07.2002 8.2 A T^MONI Monitor idle mode and dedicated mode Test command AT^MONI =? Response ^MONI: (lis t of suppor ted < period > s) OK Wri.
AT C ommand Set MC35_AT C_01_V05.00 Page 187 of 256 15.07.2002 Dedicated c hannel : chann ARFCN ( Absolute Fre quen cy Channe l Num ber) of the TCH car rier Note: <cha nn> = h indicates f requenc y hopping.
AT C ommand Set MC35_AT C_01_V05.00 Page 188 of 256 15.07.2002 8.3 A T^MONP Monitor n eighbour cells Test command AT^MON P=? Response ^MO NP: (lis t of s upported < period > s) OK Write comm and AT^MO NP=[ <per iod> ] This command c an be used to r etrieve inform ation of up to six neighb our cells autom atica lly ever y n seconds.
AT C ommand Set MC35_AT C_01_V05.00 Page 189 of 256 15.07.2002 8.4 A T^S ACM Advice of charge and query of ACM and ACMmax Test command AT^SACM =? Response ^SACM : ( list of s upported <n> s) OK .
AT C ommand Set MC35_AT C_01_V05.00 Page 190 of 256 15.07.2002 8.5 A T ^SBC Battery charging / discharging and charge control This chapter is o nl y applica ble to MC 35, it is not inte nded f or MC35 T erm inal.
AT C ommand Set MC35_AT C_01_V05.00 Page 191 of 256 15.07.2002 Read command AT^SBC? Response ^SBC: <bc s>,< bcl>,< mpc> < bcs > Conn ection s tatus of battery p ack <bcl > Batter y char ge le vel W hile charging is in progr ess (char ging adapter c onnected) the batter y cap acit y is not avai lable.
AT C ommand Set MC35_AT C_01_V05.00 Page 192 of 256 15.07.2002 Unsolicit ed result code ^SBC: Un dervoltage The m essage will b e repor ted, for ex ample, when you attem pt to set up a c all while the vo ltage is c lose to the c ritica l lim it and further power loss is caused d ur- ing the tr ansm it burst.
AT C ommand Set MC35_AT C_01_V05.00 Page 193 of 256 15.07.2002 8.6 A T^S CID Display SIM card identification number Test command AT^SCID= ? Response OK If error is relate d to ME f unctiona lity: +CME ERROR: <err> Para meter Execute command AT^SCID Response TA retur ns the identific atio n number of the SIM card (s ee GSM 11.
AT C ommand Set MC35_AT C_01_V05.00 Page 194 of 256 15.07.2002 8.7 A T^S CKS Set SIM connection pr esentation mode and query SIM con- nection status Test command AT^SC KS=? Response ^SCKS: (l ist of s.
AT C ommand Set MC35_AT C_01_V05.00 Page 195 of 256 15.07.2002 8.8 A T^SCNI List Call Number Information Test command AT^SCNI= ? Response OK Execute command AT^SCN I Response TA retur ns a list of current calls of ME.
AT C ommand Set MC35_AT C_01_V05.00 Page 196 of 256 15.07.2002 8.9 A T^SCTM Set critical operating temperatu re presentation mode or query t emperature Use this com m and to monitor the tem peratur e range of the module a nd the batt ery.
AT C ommand Set MC35_AT C_01_V05.00 Page 197 of 256 15.07.2002 Reference Siemens Note Important: · Please r efer to [ 1] for s pecific ations on critic al tem peratur e ranges . · To avoi d damage t he m odule will shut do wn onc e the c ritical tem per ature is exceeded .
AT C ommand Set MC35_AT C_01_V05.00 Page 198 of 256 15.07.2002 8.10 AT^SDLD Delet e the “last number redial“ memory Test command AT^ SDL D=? Response OK Execute command AT^SDLD The ex ecute comm and del etes all num bers stor ed in the LD m emor y.
AT C ommand Set MC35_AT C_01_V05.00 Page 199 of 256 15.07.2002 8.13 AT^SLCK Facility lo ck Test command AT^SLCK =? Response ^SLCK : ( list of supporte d <fac> s) OK Para meter See write com m an.
AT C ommand Set MC35_AT C_01_V05.00 Page 200 of 256 15.07.2002 <mod e> 0 unlock 1 lock 2 query status <passwd> passw ord <class> integer or sum of integ ers each r epresentin g a <.
AT C ommand Set MC35_AT C_01_V05.00 Page 201 of 256 15.07.2002 8.14 AT^SMGL List SM S messages from pr eferred storage Test command AT^SMG L=? Response See write com mand + CM GL Para meters See comm .
AT C ommand Set MC35_AT C_01_V05.00 Page 202 of 256 15.07.2002 8.15 AT^SMGO Set or query SMS overflow presentation mode or query SMS ov erf lo w Test command AT^SMGO= ? Response ^SGM O : ( list of s u.
AT C ommand Set MC35_AT C_01_V05.00 Page 203 of 256 15.07.2002 8.16 AT^SMSO Switch off mobile station Test command AT^SM SO=? Response OK Execute command AT^SMSO Response ^SMSO: MS OFF OK Device wil l be switc hed of f (po wer down m ode) Reference Siemens Note Do not send an y command af ter this c omm and 8.
AT C ommand Set MC35_AT C_01_V05.00 Page 204 of 256 15.07.2002 8.18 AT^SM20 Set M 20 Compatibility Test command AT^SM20 =? Response OK Read command AT^SM20 ? Response ^SM2 0: <n>,<m> OK Para meters See write com m and Write comm and AT^S M20=<n > Response M20 is an e arlier , widel y used SIEM ENS G SM engi ne.
AT C ommand Set MC35_AT C_01_V05.00 Page 205 of 256 15.07.2002 8.19 AT^SNF A Set or query microphone attenuation Test command AT^SNFA =? Response ^SNFA: (lis t of suppor ted <atten> s) Para mete.
AT C ommand Set MC35_AT C_01_V05.00 Page 206 of 256 15.07.2002 OK at^snfa? ^SNFA: 1 OK at^snfi? ^SNFI: 5,1 OK at^snfi=5,45 OK at^snfa? ^SNFA: 45 OK 8.20 AT^SNFD Set audi o parameters to manuf acturer default v alues Execute command AT^SNFD TA res ets the param eters currently selec ted in audio m odes 2 – 6 to their f actory values.
AT C ommand Set MC35_AT C_01_V05.00 Page 207 of 256 15.07.2002 8.21 AT^SNFI Set micr ophone path parameter s Test command AT^SNFI=? Response ^SNFI: ( list of support ed <inB bcGa in> s), ( list .
AT C ommand Set MC35_AT C_01_V05.00 Page 208 of 256 15.07.2002 8.22 AT^SNFM Mute microphone Test command AT^SNFM= ? Response ^SNFM : (list of supported <mute> s) OK Para meter See write com m an.
AT C ommand Set MC35_AT C_01_V05.00 Page 209 of 256 15.07.2002 8.24 AT^SNFO Set audio output (= loudspeake r path) parameter Test command AT^SNFO =? Response ^SNFO : ( list of suppor ted <out Bbc Gain > ), (l ist of supporte d <outCa li- brate[0.
AT C ommand Set MC35_AT C_01_V05.00 Page 210 of 256 15.07.2002 8.25 AT^SNFPT Call pro gress tones Test command AT^SNF PT =? Response ^SNFPT: (list of s upported <pt> s) Parameter See write com m.
AT C ommand Set MC35_AT C_01_V05.00 Page 211 of 256 15.07.2002 8.26 AT^SNFS Sele ct audio hard ware set Test command AT^SNFS =? Response ^SNFS : (lis t of supported < audM ode> s) OK Parameter S.
AT C ommand Set MC35_AT C_01_V05.00 Page 212 of 256 15.07.2002 8.27 AT^SNFV Set loudspeaker v olume Test command AT^SNFV =? Response ^SNFV : (lis t of sup ported < outStep> s) OK Para meter See .
AT C ommand Set MC35_AT C_01_V05.00 Page 213 of 256 15.07.2002 8.29 AT^SPBC Search the first entry in the sorted telephone book Test command AT^SPB C=? Response ^SPBC: (lis t of sor ted te lephone bo .
AT C ommand Set MC35_AT C_01_V05.00 Page 214 of 256 15.07.2002 8.30 AT^SPBG Read entry from act ive telephone book v ia sorted index This comm and sorts the active ph onebook rec ords b y nam e, in alpha betic al order .
AT C ommand Set MC35_AT C_01_V05.00 Page 215 of 256 15.07.2002 8.31 A T ^SPBS Steps the selected phonebook alphabetically This comm and can be use d to flick through the acti ve phone book records in alphab etical or der b y name. CAUTION: T he AT ^SBPS comm and is inten ded for read ing only .
AT C ommand Set MC35_AT C_01_V05.00 Page 216 of 256 15.07.2002 8.32 AT^SPIC Display PIN counter Test command AT^SPIC =? Response OK If error is relate d to ME f unctiona lity: +CME ERROR: <err> Para meter Execute command AT^SPIC TA retur ns the num ber of attem pts st ill availab le for en tering a requ ired pas sword, e.
AT C ommand Set MC35_AT C_01_V05.00 Page 217 of 256 15.07.2002 at^spic ^SPIC: 1 OK at+cpin=4713 +CME ERROR: incorrect password at^spic ^SPIC: 63 OK at+cpin=4714 +CME ERROR: incorrect password at^spic ^SPIC: 63 8.
AT C ommand Set MC35_AT C_01_V05.00 Page 218 of 256 15.07.2002 8.34 AT^SPLR Read entry from the preferred operators li st Test command AT^SPLR =? Response TA retur ns the who le index range su pported b y the SI M.
AT C ommand Set MC35_AT C_01_V05.00 Page 219 of 256 15.07.2002 8.35 AT^SPLW Writ e an en try to t he preferred operators li st Test command AT^SPLW =? Response TA retur ns the who le index range su pported b y the SI M.
AT C ommand Set MC35_AT C_01_V05.00 Page 220 of 256 15.07.2002 8.36 AT^SPWD Change password for a lock Test command AT^SPW D=? Response ^SPWD: (lis t of supp orted (<fac>, <pwdlength>) s) .
AT C ommand Set MC35_AT C_01_V05.00 Page 221 of 256 15.07.2002 See not es above or contac t prov ider. if <fac > = “SC” then PIN if <fac > = “AO” .
AT C ommand Set MC35_AT C_01_V05.00 Page 222 of 256 15.07.2002 8.37 AT^SRTC Select , query , test ring tone paramet ers Test command AT^SRTC=? Response ^SRTC : (l ist of s upported <type> s), ( .
AT C ommand Set MC35_AT C_01_V05.00 Page 223 of 256 15.07.2002 Execute Command AT^SRTC The Ex ecute comm and is intended f or test ing. It st arts to p la y a mel- ody from the audio output c urrentl y selected with th e AT ^SNFS com - mand. Response OK To st op the test us e AT ^SRTC again.
AT C ommand Set MC35_AT C_01_V05.00 Page 224 of 256 15.07.2002 8.38 AT^SSC ONF SMS Configuration Test command AT^SSCO NF =? Response ^SSCONF: ( list of supporte d <ra> s) Para meter See write co.
AT C ommand Set MC35_AT C_01_V05.00 Page 225 of 256 15.07.2002 8.39 AT^SSDA Set Display Av ailability Use the AT ^SSDA c omm and to s pecif y whether your MC35 prod uct is designe d to pro vide a d ispla y.
AT C ommand Set MC35_AT C_01_V05.00 Page 226 of 256 15.07.2002 8.40 AT^SSYNC Configure S YNC Pin The ^SS YNC comm and se rves to c onfigure the SYN C pin in the ZIF conn ector of the GSM e ngine. Please n ote that the pin m ay be ass igned d iffe rent functions , dep ending o n the design of the host applicat ion.
AT C ommand Set MC35_AT C_01_V05.00 Page 227 of 256 15.07.2002 Table 12: Operat ing m odes of the ME ind icated b y status LED (if <m ode> = 1 ) : LED mode Function Off MC35 module : ME is off or running in SLEEP, A larm or Charge-onl y mode. MC35 Ter min al : ME is of f or in SLEEP m ode.
AT C ommand Set MC35_AT C_01_V05.00 Page 228 of 256 15.07.2002 8.41 AT^S TCD Display Total Call Duration Test command AT^STCD=? Response OK Execute command AT^STCD Response TA returns tota l call dura.
AT C ommand Set MC35_AT C_01_V05.00 Page 229 of 256 15.07.2002 9 A PPENDIX 9.1 Summary of ERRORS and Message s The final res ult codes +CME ERROR: <err> and +CMS ER ROR: <err> indicate errors relate d to mo- bile equi pment or network . T he effect is sim ilar to an ERROR res ult code.
AT C ommand Set MC35_AT C_01_V05.00 Page 230 of 256 15.07.2002 Code of <err> Meaning 42 Network subset pers onali zation PI N require d 43 Network subset per sonal ization P UK requ ired 44 serv.
AT C ommand Set MC35_AT C_01_V05.00 Page 231 of 256 15.07.2002 9.1.3 Summary of CMS ERRORS related to GSM 07.05 Code of <err> M eanin g 1 Unass igned (u nalloca ted) n um ber 8 Oper ator determ .
AT C ommand Set MC35_AT C_01_V05.00 Page 232 of 256 15.07.2002 Code of <err> M eanin g 213 SIM data download error 255 Unspecified er ror caus e 300 ME failure 301 S MS service o f ME reserved 3.
AT C ommand Set MC35_AT C_01_V05.00 Page 233 of 256 15.07.2002 AT+CMGS=123456 +CME ERROR: 10 // Equiva lent to + CMS ERROR: 310 Exam ple 2 The app lication tries to sen d a s hort m essage while t he SIM c ard is pres ent, but PIN authentic ation has not yet bee n done.
AT C ommand Set MC35_AT C_01_V05.00 Page 234 of 256 15.07.2002 9.1.4 Summary of Unsolicited Result Codes (UR C) A URC is a rep ort m essage s ent from the ME to the T E. An unsolic ited r esult code c an eit her be deliv- ered autom atical ly when a n event occur s or as a r esult of a quer y the M E recei ved befor e.
AT C ommand Set MC35_AT C_01_V05.00 Page 235 of 256 15.07.2002 Messag e Mean ing How t o activat e URC +CSSI: <co de1> +CSSU: <co de2> Supplem entar y servic e interm edi- ate /unsoli cite.
AT C ommand Set MC35_AT C_01_V05.00 Page 236 of 256 15.07.2002 Table 14: Summ ary of F ax Class 2 UR Cs def ined b y EIA PN- 2388 Messag e Meaning +FCON Indicates connectio n with a fax mac hine +FNSF.
AT C ommand Set MC35_AT C_01_V05.00 Page 237 of 256 15.07.2002 9.1.5 R esult codes Indication Numeric Meaning OK 0 Command exec uted, no err ors, W ake up af ter reset CONNECT 1 Link establis hed RING.
AT C ommand Set MC35_AT C_01_V05.00 Page 238 of 256 15.07.2002 51 SIEMENS ca use for Sessi on Managem ent 128 Sup plem entar y Services ge neral problem (GSM 04. 80 3.6.7) 129 Sup plem entar y Services invok e problem (G SM 04.80 3.6.7) 130 Sup plem entar y Services r esult pr oblem (G SM 04.
AT C ommand Set MC35_AT C_01_V05.00 Page 239 of 256 15.07.2002 9.1.9 GSM release cause f or Mobility Management (MM) ( AT+CEER) Number Description Causes rel ated to MS ident ificat ion 2 IMSI unkno w.
AT C ommand Set MC35_AT C_01_V05.00 Page 240 of 256 15.07.2002 9.1.10 SIEMENS rele ase cause for L3 Mobility Management (MM) (AT+CEER) Number Description 1 No S IM avai labl e 8 No MM conn ection 9 Au.
AT C ommand Set MC35_AT C_01_V05.00 Page 241 of 256 15.07.2002 Number Description Service or opt ion not availa ble clas s 49 Quality of ser vice unava ilable 50 Requested fac ilit y not subsc ribed 5.
AT C ommand Set MC35_AT C_01_V05.00 Page 242 of 256 15.07.2002 9.1.13 SIEMENS r elease cau se for L3 A d v ice of Charge (A O C) (AT+C EER) Number Description 1 SIM dat a not ava ilable 2 SIM does not support AO C 3 SIM dat a access error 4 ACM lim it alm ost reac hed ACM r ang e overf low 5 ACM rang e overf low 9.
AT C ommand Set MC35_AT C_01_V05.00 Page 243 of 256 15.07.2002 Number Description 306 Res ource Lim itation 307 Init iating Release 308 Unr ecognized Li nked ID 309 Link ed Resp onse U nexpected 310 U.
AT C ommand Set MC35_AT C_01_V05.00 Page 244 of 256 15.07.2002 Number Description 36 Regular PDP context deac tivation 37 QoS not accept ed 38 Ne two rk fai lu re 39 Reactivatio n requested 40 Feature.
AT C ommand Set MC35_AT C_01_V05.00 Page 245 of 256 15.07.2002 9.1.19 SIEMENS r elease cau se for Emb edded Netcore (A T+CEER) Number Description 0 Regular c all deac tivati on 1 LCP stoppe d 255 Unde.
AT C ommand Set MC35_AT C_01_V05.00 Page 246 of 256 15.07.2002 9.2 Summary of PIN requiring A T Commands The f ollowing t able lis ts all t he AT c omm ands that are availa ble after the PIN was entere d.
AT C ommand Set MC35_AT C_01_V05.00 Page 247 of 256 15.07.2002 A T command Required PIN AT+CPW D PIN 1, PIN 2 AT+CR PIN 1 AT+CRSM PIN 1 AT+CSC A PIN 1 AT+CSC B PIN 1 AT+CSDH PIN 1 AT+CSM P PIN 1 AT+CS.
AT C ommand Set MC35_AT C_01_V05.00 Page 248 of 256 15.07.2002 9.3 A T commands available before entering the SIM PIN The f ollowing t able sum marizes the AT comm ands you c an use bef ore the SI M PI N has been entered. Explanat ion: l AT comm and us able witho ut PIN --- not usable without PIN n.
AT C ommand Set MC35_AT C_01_V05.00 Page 249 of 256 15.07.2002 A T command T est Read Write / Execut e Note AT+CO PS Phone b usy Unk nown --- Not usef ul without PIN AT+CP AS l n.a. l Only 0 AT+CPIN l l l AT+CR l l l AT+CRC l l l AT+CREG l l l AT+CRLP l l l AT+CSC S l l l AT+CSN S l l l AT+CSQ l --- l AT+CS SN l l l AT+G CAP l n.
AT C ommand Set MC35_AT C_01_V05.00 Page 250 of 256 15.07.2002 9.4 Standard GSM service code s The f ollowing G SM comm and strin gs can b e sent with the ATD comm and.
AT C ommand Set MC35_AT C_01_V05.00 Page 251 of 256 15.07.2002 *# code Functionality Possibl e respo nse(s) USSD mess ages [C]... [C]# (varies with the servi ng network) Send USSD message +CME ERROR: <err> / OK (see Chapt er 4.
AT C ommand Set MC35_AT C_01_V05.00 Page 252 of 256 15.07.2002 9.4.1 Additional notes on ^SCCFC, ^S CCWA, ^SCLCK The outpu t of ^SCCF C, ^SCCW A, ^SCLCK depends on t he teles ervices co ded in <c lass >.
AT C ommand Set MC35_AT C_01_V05.00 Page 253 of 256 15.07.2002 Example 4 To quer y the stat us of CF U for voic e + SM S + da ta: atd*#21**10#; ^SCCFC: 0,1,1,"+493038649027",145 ^SCCFC: 0,1,4,"+493038649027",145 OK The re sponse does n ot includ e SMS, si nce no ca ll for wardi ng for SM S is not active.
AT C ommand Set MC35_AT C_01_V05.00 Page 254 of 256 15.07.2002 9.5 GSM and UCS2 alphabet tables This section prov ides table s for the spec ial GSM 03. 38 alpha bet supporte d by the M E (see chapte r 1.5). Bel ow each G SM char acter you can find t he corr espond ing t wo byte UCS2 c harac ter val ue.
AT C ommand Set MC35_AT C_01_V05.00 Page 255 of 256 15.07.2002 b7 0 0 0 0 1 1 1 1 b6 0 0 1 1 0 0 1 1 Extension c harac ter table of GSM 03.3 8 alphabet b5 0 1 0 1 0 1 0 1 b4 b3 b2 b1 0 1 2 3 4 5 6 7 0.
AT C ommand Set MC35_AT C_01_V05.00 Page 256 of 256 15.07.2002 2) This c ode represents the EURO currenc y s y m bol. T he code v alue is t he one u sed for the character ‘e’. T herefor e a recei ving entit y which is inc apable of displ aying the EURO c ur- renc y sy m bol wil l displa y the char acter ‘e’ inst ead.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Siemens MC35 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Siemens MC35 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Siemens MC35 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Siemens MC35 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Siemens MC35, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Siemens MC35.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Siemens MC35. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Siemens MC35 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
