Manuale d’uso / di manutenzione del prodotto E-110-I del fabbricante Siemens
Vai alla pagina of 90
SIEMENS ADSL E-110/E-110-I ETH & USB ComboRouter User Manual Rev:0 1_0402 20 2004 -02-20 No par t of this publication ma y be re pro duced in an y f orm b y any me ans without the pr ior written p.
SIEMENS ADSL E-110_E-110-I user manual Safety Notes For Inst allation • Use only t he type of po wer sourc e indicated o n the ma rking lab els. • Use only the po wer adap ter supplied with the p roduct. • Do no t ov erload wall out let or extension c ables as this ma y incr ease the risk of electric s hock or fire.
Contents Content Safety N otes................................................................................................................... .............. i Safety N otes...........................................................................
SIEMENS ADSL E-110_E-110-I user manual Advanced Configu ratio n via We b browser .............................................................................. 33 Main Menu ..............................................................................
Contents Appendix: Spe c ific ation ................................................................................................................... 8 3 Softwa re .....................................................................................
.
Before You Use Before You Use The SIEMENS ADSL E-110/E- 110-I is an Asymmetric Di gi tal Subscriber Line (ADSL) Router . With the asymmetric tec hnology , t his de vice runs o ver stand ard co pper phone lines. In add ition, ADSL allo ws y ou t o hav e bo th voice and data services in use s imultaneously all o ver one phone line.
SIEMENS ADSL E-110_E-110-I user manual Configurat ion and Management • DSL Forum TR 37-comp liant aut o configuration • SNMPv1 o ver DSL o r Ethern et f or access t o the MIB-II (r outer only) •.
Chapter 1: O verview Chapter 1: Overview Ph ysi cal Out look Ph ysi cal Out look F ront Panel The f ollow ing illustration s hows t he fr ont panel of the ADSL Router : LED Indicators (Front Panel Sys.
SIEMENS ADSL E-110_E-110-I user manual Rear PanelRear Panel The f ollo wing figure illustrates t he re ar panel of y our A DSL Router . ADSL Connects the device to an ADSL telephone jack using the supp lied cable. USB Connects the device to the USB port o n your PC.
Chapter 2: Installation Chapter 2: Installation Choosing a place f or the ADSL R outer 1. Place the ADS L Router close t o ADSL w all outlet and pow er outlet f or the cable to reac h it easily . 2. A void placing the de vice in places wher e people may w alk on the cables.
SIEMENS ADSL E-110_E-110-I user manual ISDN inst all ation If your telephone service is ISDN (SIEMENS ADSL E-110-I) , proceed as f oll ows t o install your H ardw are : 1. Remo ve t he U-Line (incom ing line) f orm your ISDN NT and plug it int o the “LINE” plug of t he ISDN Splitter .
Chapter 2: Installation USB driver installation Install the USB driver Note: The USB driv er is only work ing on the f ollowing operating systems (O S): Windows 98, Windo ws 98SE, Windo ws ME, Windo w.
SIEMENS ADSL E-110_E-110-I user manual 7. Y ou will be asked whethe r the PC should be r estarted. Click on Close . The PC will be restarted and the f ollowing windo w appears: 8.
Chapter 3: Co nfigur ation Chapter 3: Configuration In order to access the Internet t hro ugh the r outer , y ou must c heck t he T CP/IP settings bef ore configuring the ro uter .
SIEMENS ADSL E-110_E-110-I user manual 2. Doub le-click the Network icon. 3. The Netwo rk windo w appears. On t he Configuration tab, chec k out the list of installed netw ork components. Option 1 : If you hav e no TC P / I P p r o t o c o l , c l i c k [Add] .
Chapter 3: Co nfigur ation 5. On the left side of the windo ws, hig hlight Microsoft and then se lect TCP/I P on th e righ t side . Then click [OK] . 6. When returning to Netw ork windo w , highlight TCP /I P pro tocol f or your NIC and clic k [Properties] .
SIEMENS ADSL E-110_E-110-I user manual 8. When returning to Netw ork windo w , click [OK] . 9. Windows ma y ask yo u f or the original Windo ws installatio n disk or additional files. Insert the Windows 95 installation C D-ROM and click [OK] . 10. Supply the r equested files by point ing to the corr ect location, e.
Chapter 3: Co nfigur ation For Windo ws 98 and Windo ws 98 SE Note: Windows 98 an d 98 SE u sers n eed the Windows 98 / Windows 98 SE installation CD-ROM to complete t he installation! 1. Click on the St ar t menu , point to Settings and click o n Control Panel .
SIEMENS ADSL E-110_E-110-I user manual 3. The Netwo rk windo w appears. On t he Configuration tab, chec k out the list of installed netw ork components. Option 1 : If you hav e no TC P / I P p r o t o c o l , c l i c k [Add] . Option 2 : If you ha ve T CP/IP pro tocol, go t o Step 6.
Chapter 3: Co nfigur ation 6. When returning to Netw ork windo w , highlight TCP /I P pro tocol f or your NIC and clic k [Properties] . 7. On IP Addres s tab, select Obtain an IP address automat ically . Then click [OK] . 8. When returning to Netw ork windo w , click [OK] .
SIEMENS ADSL E-110_E-110-I user manual 9. Windows ma y ask yo u f or the original Windo ws installatio n disk or additional files. Insert the Windows 95 installation C D-ROM and click [OK] . 10. Supply the r equested files by point ing to the corr ect location, e.
Chapter 3: Co nfigur ation For Windows ME 1. Click on the St ar t menu , point to Settings and click o n Control Panel . 2. Doub le-click the Network icon. 3. The Netwo rk windo w appears. On t he Configuration tab, chec k out the list of installed netw ork components.
SIEMENS ADSL E-110_E-110-I user manual For Windows NT Note: Windows NT users need the Window s NT installation CD-ROM to com plete t he installation! 1. Click St a r t , point to Settin gs and t hen click Control Panel . 2. Doub le-click the Network icon.
Chapter 3: Co nfigur ation 4. Highlig ht TCP/IP Protocol and click [OK] . 5. Click [Yes] to u se D H CP . 6. Insert the Windows NT C D int o yo ur CD-ROM driv e and ty pe the locat ion of the C D. Then click [Continue] . 7. Returning t o the Net work windo w , you will find t he T CP/IP Prot ocol among the list.
SIEMENS ADSL E-110_E-110-I user manual 9. Right click on t he Network Neighborhood icon on the des ktop and sel ect Proper t ies . 10. In the Protocol tab select T CP/IP Protocol and click on [Properties] . 11. Select Obtain an IP address from a DHCP server .
Chapter 3: Co nfigur ation 13. When returning to Network wind ow , click [OK] . Rev:0 1_0402 20 2 1.
SIEMENS ADSL E-110_E-110-I user manual For Windo ws 2000 1. F ro m the S tart menu, point t o Settings and then c lick Network and Dial-up Connections . 2. Right-clic k the Local Area Connection icon and then click Properties . 3. On the General tab, check out the list of installed net work com ponents.
Chapter 3: Co nfigur ation 4. Highlig ht Protocol and then c lick [Add] . 5. Click Internet Protocol(TCP/IP) and then c lick [OK] . 6. When ret urning t o Local Ar ea Co nnection Pr operties window , highlight Internet Prot ocol (TCP/IP) and then clic k [Properties] .
SIEMENS ADSL E-110_E-110-I user manual 7. Under t he General tab, select Obtain an IP address automatically . Then click [OK] . 8. When promp ted to restart your computer , rebo ot it t o enable the settin gs.
Chapter 3: Co nfigur ation For Windows XP 1. F ro m the St ar t menu, point t o Control Panel and the n click Network and Internet Connections . 2. Cl ick Network Connection and then clic k Propert ies . 3. On the General tab, c heck out t he list of installed net work com ponents.
SIEMENS ADSL E-110_E-110-I user manual For Macintosh OS 8.6 a nd 9.x 1. F ro m the Apple Men u , point to Co ntrol Panels and the n click TCP/IP . 2. F r om the Connect via pull-do wn menu se lect Ethernet built-in . F rom the Configure pull-down menu select Using DHCP Ser ver .
Chapter 3: Co nfigur ation For Macintosh OS 10.x 1. F ro m the Apple Men u , select System Preferences… 2. Cl ick on Network . 3. F ro m the Show pull-do wn menu select Built-in-Ethernet . On the T CP/IP tab, select Using DHCP from the Configure pull-down menu.
SIEMENS ADSL E-110_E-110-I user manual 4. On the PPP oE tab, and make sur e that t he Connect using PPPoE check box is NO T act iva te d. Click A pply Now .
Chapter 3: Co nfigur ation Renew IP A d dress on Client PC There is a c hance that y our PC does no t re new its IP add ress after the ADSL Router is on line an d the PC canno t access t he Internet. Please f ollow the pr ocedur es belo w t o rene w PC’s IP address.
SIEMENS ADSL E-110_E-110-I user manual For Windows ME 1. Select Run from the St ar t menu. 2. T ype winipcfg in t he dialog bo x and the click [OK] . 3. When the figu re be low ap pears, click [Release] and t hen [Renew] t o get an IP addr ess. For Windows NT 1.
Chapter 3: Co nfigur ation For Windo ws 2000 1. F ro m the St ar t menu, point t o Programs > Accessories and t hen click Command P rompt . 2. T ype ipconfig at pr omp t.
SIEMENS ADSL E-110_E-110-I user manual St ep 2: Quick Configu ration via Web browser Y our ADSL Route r includes a Web-base d Configuration Manager , which e nables y ou to configure the device settings t o m eet the needs of y our network.
Chapter 3: Co nfigur ation Advanced Configuration via Web browser Note: Please f ollow caref ully the instructions in the who le chap ter in or der t o be sure that yo ur PC and your ADSL Route r are work ing pr operly . For advance d configuration click t o Advanced Configuration .
SIEMENS ADSL E-110_E-110-I user manual Main Menu Configuration Manager tasks ar e gr oupe d inf o categories which can be accessed by c licking t he main menu on the left. Each menu disp lays the a vailable tasks in sub-menus. The spec ific configuratio n opt ions are dis play ed by clicking on these menus .
Chapter 3: Co nfigur ation Viewing Basic System Information The System View page displa ys when y ou first access the prog ram. The System View table pr ovides a snapsho t of your system configurat ion.
SIEMENS ADSL E-110_E-110-I user manual Quick Configuration The Quick Configur ation displa ys the settings y ou ar e most likely to nee d to c hange when y ou first set up your A DSL Router . W ork with your ISP to determine the values or settings yo u need t o change.
Chapter 3: Co nfigur ation Fie ld Description Use DNS Enable Primary DNS Server / Secondary DNS Server Enter the Primar y and Seco ndary DNS s erver address es provided by yo ur ISP Commit ting Change.
SIEMENS ADSL E-110_E-110-I user manual Sub-Menus For advance d mode, the f ollowing sub-menus ar e av ailable : Lan LAN Config Sets LAN configur ation, whic h determine s you the device is def ined in the network. DHCP Mode Sets and configures the Dynamic Ho st Configuration Protocol mode for the device.
Chapter 3: Co nfigur ation PPP Configures and displays Point to Point Protocol (PPP) interfaces. T he PPP protocol is commonly u sed be tween ISP s and thei r custom ers to id entify and con trol vari ous commu nica tion p roper tie s. EOA Configures an d displays RFC1483/Ethe rnet over A TM (EoA) interf aces.
SIEMENS ADSL E-110_E-110-I user manual Chapter 4: Advanced Configuration Configuring IP Rou tes Most us ers do no t nee d t o defi ne IP r out es. Y ou may need t o def ine r outes if: • Y our network setup includes two or more networks or subnets. • Y ou connect to two or more ISP servi ces.
Chapter 4: Advance d Config uration DHCP Configuration Y ou ca n conf igur e yo ur net wo rk an d ADS L Rout er t o us e the Dy nami c Host Config uratio n Pr o t ocol (DHCP) . The device c an be configured as a DHCP server , DHCP rela y agent, or , in some cases, a DHCP client.
SIEMENS ADSL E-110_E-110-I user manual 2. T o add an IP addr ess pool, click [Add] . The DHCP Ser ver Pool - Add page displays. Fie ld Description Start / End IP Addresses Specify the lowest and highest addresses in the pool.
Chapter 4: Advance d Config uration Par t 3. Configuring your PCs as DHCP clients For eac h computer that y ou want t o configur e t o rec e ive IP inf ormation auto matically , configure the T CP/IP properties to Obtain an IP address automat ically (the actual text may vary depending on yo ur operating system).
SIEMENS ADSL E-110_E-110-I user manual Configuring DH CP Rela y Par t 1. Defining the DHCP relay interface(s) 1. Select Lan > DHCP Rela y . The D HCP Rela y Configuration page displ ays.
Chapter 4: Advance d Config uration NA T Configuration This section pr o vides an o ver view of Netw ork Addr ess T ranslation (NA T) and instructions f or modifying the default config uration o n your device.
SIEMENS ADSL E-110_E-110-I user manual The NA T Global Information table contains the f oll owing fields: Fie ld Description TCP I dle Tim eout( sec) For a NAT tr ansl ati on ses sion on data that u ses th e TCP pr otoco l, th e translation will no lo nger be performed if no matching data packet s are received after the specified time ha s elapsed.
Chapter 4: Advance d Config uration On the NA T Configuration page you can cl ick [Global Stats] to view accumula ted da ta on how many NA T rules hav e been in voke d and ho w much data has been translate d. A page similar t o the one below displays.
SIEMENS ADSL E-110_E-110-I user manual Viewing NA T Rules and Rule Statistics T o vi ew the N A T Rules currently defined on your s ystem, select Ser vices > NA T . Fr om the NA T Options dro p-do wn list select NA T Rul e En tr y . The NA T Rule Configuration page displays.
Chapter 4: Advance d Config uration Fie ld Description ALG Type The Applicati on Level G ateway (ALG), if any, that was used to enable this NA T translation (A LGs are special s ettings that cert ain applic ations req uire in ord er to work while NAT is e nabled).
SIEMENS ADSL E-110_E-110-I user manual 2. Define the r ule ID and selec t the interface. 3. In the Local Address F rom/T o fi elds , type th e sta r tin g and en ding IP addresse s, respe ctivel y , of the range of priva te addr ess yo u want t o be tr anslated.
Chapter 4: Advance d Config uration 7. If the publicly accessible L AN computer us es a non-standar d port number for the type of traffic it receiv es, type the no n-standard port number in the Local Por t field. 8. Complete as desc ribed f or general proced ure (steps 6 to 10) .
SIEMENS ADSL E-110_E-110-I user manual 1. On the NA T Rule - Ad d page, sel ect FIL TER from the Rul e Fl avor drop-do wn list. 2. Define the r ule ID and selec t the interface. 3. F ro m the Protocol drop-do wn list, select a pro t ocol to which this rule app lies, or choose AN Y if the rule applies t o all data.
Chapter 4: Advance d Config uration Bimap rules can be used t o prov ide external ac cess to a L AN device. They do not pro vide the same le vel of security as r dr rules, bec ause rd r rules also rer oute inco ming packets based on the port ID.
SIEMENS ADSL E-110_E-110-I user manual RIP Configuration Y our ADSL Router can be configur ed t o communicate with o ther rout ing de vices t o determine t he best path f or sendi ng data to its int ended destinat ion.
Chapter 4: Advance d Config uration 6. Click [Add] . The new R IP entry will display in t he table. 7. Click the Enable radio button t o enable the RIP feat ure. 8. When you a re finished defining RIP inter fa ces, cli ck [Apply] . A pa ge gives a receipt f or the chang es.
SIEMENS ADSL E-110_E-110-I user manual Fir ewal l, IP Fil te r s a nd B lo cke d Pr ot oc ol s Fire wall Configurati on Configuration M anager pr o vides b uilt-in fir ewal l functions, enab ling y ou t o pr otec t the system ag ainst denial of service (DoS) attacks and o ther types of mali cious accesses t o your L AN.
Chapter 4: Advance d Config uration Fie ld Description Max Half open T CP Conn. Sets the percent age of concurrent IP ses sions that can be in the half-open state.
SIEMENS ADSL E-110_E-110-I user manual IP Filter Configuration The IP filter featur e enables you t o create rules that co ntro l the f or warding of inco ming and outg oing data betwee n your L AN and the Intern et. This c hapter explains ho w to cre ate IP filter rules.
Chapter 4: Advance d Config uration Creating IP Filter Rules 1. On the IP Filter C onfiguration page clic k [Add] . The IP Filter Rule - Add page displays. 2. Enter or selec t data f or eac h field that applies t o yo ur rule: Fie ld Description Rule ID Rules are processed from lowest to highest on each data packet, unt il a match is found.
SIEMENS ADSL E-110_E-110-I user manual Fie ld Description Log Option When Enabled i s selected, a l og entry will be created on the system each time this rul e is i nvo ked . Security Level The security level that mus t be enab led globally f or this rule to t ake affect.
Chapter 4: Advance d Config uration Fie ld Description Dest Port Port number criteria for the d estination comp uter(s) (i.e., the port number of the type of computer to which the packet is being sent). This field will be dimmed (unav ailable for e ntry) unless you have selected TCP o r UDP as the protocol.
SIEMENS ADSL E-110_E-110-I user manual IP filter rule exam ples Example 1 . Blocking a specific com puter on your LAN from using acc essing Web s er vers on t he Internet: 1. Add a ne w rule for outgo ing packets o n the ppp-0 interface from an y incoming inter face (this w ould include the et h-0, f or example).
Chapter 4: Advance d Config uration The figur e belo w sho ws ho w this rule could be configur ed: Vie win g IP F ilter S tatist ics 1. Select Ser vices > IP Filter .
SIEMENS ADSL E-110_E-110-I user manual Managing Current IP Filter Sessions 1. Select Ser vices > IP Filter . The IP F ilter Configuration page displays. 2. T o view all cur rent IP sessions, c lick [Session] . The IP Filters Session page displa ys .
Chapter 4: Advance d Config uration A dmi nist rat ion T asks Changing the System Date and Time The device keeps a r ecor d of the curr ent date and time, which it use s to calculate and report various per f ormance data. 1. Select Home . The System View page displa ys.
SIEMENS ADSL E-110_E-110-I user manual Adding a New User 1. Select Admin > User Config . The User Configuration page displays. 2. Click [Add]. The User Config - Add page displ ays. 3. Enter a new username in the User ID text bo x. It can be up to 1 28 char acters and is c ase-sensitive.
Chapter 4: Advance d Config uration Vi e w Sy ste m A la rms 1. T o display the Alarm page, select Admin > Alarm . Each r o w in the table d ispla ys the t ime and d ate that a n alarm occur red, t he type of alarm, and a brief statem ent indica ting i ts cause.
SIEMENS ADSL E-110_E-110-I user manual Por t Settings The r outer ’s HTTP service (Web Configuratio n Utility), Telnet service and FTP ser vice are accessible us ing the standard port number 80, 23 and 21 r espective ly .
Chapter 4: Advance d Config uration Vie w DS L P ar am e te rs 1. T o view configuration p arameters and p erformance statistics f or the ADSL Router ’s DSL line, select WA N > DSL S tat u s. The DSL Status page di splays. The DSL Status page displa ys curr ent inf ormation on the DSL line performance.
SIEMENS ADSL E-110_E-110-I user manual 3. F ro m the DSL Stat us page , you ca n click [Stats] to dis pla y DSL line perf ormance statistics: The DSL Statistics page rep orts error d ata relating t o the last 15 minute interval, the current da y , and the previou s day .
Chapter 5: Co nnection Mode Chapter 5: Connection Modes The ADSL Router is delive re d pre -configure d fr om the fact or y in Router Mo de. This c hapter pres ents some deplo yment ex amples f or your refer ence. Each mod e includes its general config ure pr ocedur es.
SIEMENS ADSL E-110_E-110-I user manual 3. Enter the pr o vided fields as below . Fie ld Description VC Interface Select a VCC interface from the available interf aces, e.g. aal5-1 . VPI / VCI Enter the VPI/VCI values given by your ISP, e.g. 0 / 33 . Mux Type Select LLC or VC as require d by your ISP.
Chapter 5: Co nnection Mode 5. When confirmation page appears, clic k [Close] . 6. Y ou will retur n to the AT M ( E o A ) C o n f i g page and see the ne wly added EoA entry . 3. Enable Bridging function. 1. Select Bridge > Bridging to disp lay the Bridge C onfiguration page.
SIEMENS ADSL E-110_E-110-I user manual 5. Commit your c hanges. Select Admin > Commit & Reboo t and click [Sa ve] to sav e y ou r ch a n ge s to pe r m an e n t sto r a ge .
Chapter 5: Co nnection Mode 3. Enter the pr ovided fields a s belo w: Fie ld Description VC Interface Select a VCC interface from the available interf aces, e.g. aal5-0 . VPI / VCI Enter the VPI/VCI values given by your ISP, e.g. 0 / 35 . Mux Type For PPPoE select LLC , for PPPoA select VC .
SIEMENS ADSL E-110_E-110-I user manual Fie ld Descr iption Status Select Start or Start OnData . Start - To est ablish connection whenever yo u turn on the A DSL Router. StartOnData - To establish connection wh enever th e device gets request to connect to the Internet, such as when you open browser requesting for Web pages.
Chapter 5: Co nnection Mode Router Connection Mode In this deployment enviro nment, we make up a private IP ne twork of 192.168.1.1. NA T function is enabled (on ADSL Router or use ano ther NA T box connected t o hub) to sup port multiple clients t o access t he Router and some public server s (WWW , FTP).
SIEMENS ADSL E-110_E-110-I user manual 2. Creating a IPoA inter face. 1. Select Wa n > IPOA . 2. On the IOoA Configuration page click [Add] to add a ne w IPoA int erface. 3. Enter the pr ovided fields a s belo w: Fie ld Description IPoA Interfa ce Select an IPoA interf ace from the avai lable interf aces, e.
Chapter 6: Troubleshooting Chapter 6: Troubleshooting This appendix suggests so lutions f or problems yo u ma y encounter in installing or using y our A DSL Router , and pr ovid es instructions f or using sev eral IP ut ilities t o diagnose pr oblems.
SIEMENS ADSL E-110_E-110-I user manual Problem T roubleshooting Suggestion Can not acce ss the C onf igu rat io n Manager progr am from your browser. Use the ping utility to c heck whether yo ur PC can co mmunicate with the ADSL Router’s LAN IP address (by default 192.
Chapter 7: G lossary Chapter 7: Glossary • ARP (Address Resolution Protocol ) ARP is a T CP/IP pro tocol f or mapping an IP addr ess t o a ph ysical machine add ress t hat is r ecognized in the local netwo rk, such as an Ethernet addr ess. A host wishing t o obtain a p hysical addr ess br oadcasts an ARP r equest ont o the T CP/IP network .
SIEMENS ADSL E-110_E-110-I user manual • PVC (Permanent Vir tual Circuit) A PVC is a logical point- to-point circui t between customer si tes. PVCs are low-delay circuits beca use ro uting decis ions do not ne ed to be mad e along the w ay . Permanent means that the cir cuit is prepr og rammed b y the carr ier as a path thr ough the netwo rk.
Appe ndix : Spec if icat ion Appendix: Specificat ion Software ADSL C omp lian ce • ANSI T1.413 Issue 2 • ITU G.992.2 Annex A (G.lite) • ITU G.992.1 Annex A (G.dmt) • ITU G.992.1 Annex B (G.dmt) • ITU G.994.1 (G.hs) AT M F e a t u r e s • Compliant to A TM Forum UNI 3.
SIEMENS ADSL E-110_E-110-I user manual 84 Rev:01_040220 Hardware Inter face • One RJ-11 port f or ADSL connection • One RJ-45 port for 10/100 Base-T auto -sensing Ethernet connection • One hidde.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Siemens E-110-I è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Siemens E-110-I - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Siemens E-110-I imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Siemens E-110-I ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Siemens E-110-I, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Siemens E-110-I.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Siemens E-110-I. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Siemens E-110-I insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
