Manuale d’uso / di manutenzione del prodotto DS-801 del fabbricante Sherwood
Vai alla pagina of 16
DS-801 Stereo Cassette T ape Deck Stereo Cassetten-Recorder OPERATING INSTRUCTIONS BEDIENUNGSANLEITUNG ON/STANDBY PERSONAL COMPONENT SYSTEM/STEREO CASSETTE TAPE DECK DS-801 OPEN/CLOSE.
2 ENGLISH Introduction Congratulations on Your Purchase! Your new high fidelity Cassette Tape Deck is designed to deliver maximum enjoyment and years of trouble free service. Please take a few moments to read this manual thoroughly. It will explain the features and operation of your unit and help ensure a trouble free installation.
3 ENGLISH FOR U.S.A AND CANADA ........................120 V Units shipped to the U.S.A and Canada are designed for operation on 120 V AC only. Observe all safety precautions for use of a polarized AC plug. However, some products may be supplied with a non polarized plug.
4 ENGLISH CONTENTS Introduction UNPACKING AND INSTALLATION .................................................................................................... .. 2 READ THIS BEFORE OPERATING YOUR UNIT .................................................
5 ENGLISH Rear Panel Connections • Do not plug the AC input cord into the AC outlet when plugging and unplugging connection cords. • Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making connections with the supplied cords.
6 ENGLISH Front Panel & System Remote Controls Front Panel Controls System Remote Controls SLEEP EDIT AUT O/MONO TUNING TUNE MODE PROGRAM AUX MD TUNER TAPE CD POWER 123 456 789 0 MEMO DOLBY C.
7 ENGLISH FLUORESCENT DISPLAY TAPE COUNTER DISPLAY RECORD INDICATOR TAPE DETECTION INDICATOR TAPE DIRECTION DISPLAY DOLBY B NR INDICATOR REVERSE MODE DISPLAY LEVEL METER DISPLAY CD SYNCHRO RECORDING INDICATOR WHEN USING THE SYSTEM REMOTE CONTROL UNIT OF RX-801R This unit can be remotely controlled with Sherwood system receiver RX-801R.
8 ENGLISH NOTES ON CASSETTE TAPE Before Operation • Before loading a cassette tape, take up the slack in the tape to prevent it from becoming entangled around the capstan. • After the recording has been finished, remove the tab to prevent the recorded contents from being erased or recorded on accidently.
9 ENGLISH Operations • To use the system remote control unit of Sherwood system receiver RX-801R, first connect the SYSTEM CONNECTOR jack of this unit to that of RX-801R.(Refer to the operating instructions of the RX-801R.) PLAYING BACK A TAPE In case of the tape recorded with Dolby B NR system, select the Dolby B NR mode.
10 ENGLISH • In case of forward playback(“ ”). • At the desired point, press the STOP or corresponding PLAY button. The automatic music search function automatically skips other musics, finds and starts playback from the desired music. Up to 99th music before or after the current music can be searched quickly on the current side.
11 ENGLISH • Be sure the erase-protection tabs on the tape are in place. • The type of tape(normal or chrome) is automatically detected. • The metal tapes are not recorded correctly. • ”B” lights up. Load a tape to be recorded. 1 RECORDING OPEN/CLOSE When recording with Dolby B NR system, select the Dolby B NR mode.
12 ENGLISH To stop recording 8 EON RDS REMOTE CONTROL UNIT RM-404 or SYSTEM REMOTE CONTROL UNIT (only for RX-801R) SLEEP EDIT AU TO /MONO TUNING TUNE MODE PROGRAM MUTE TIMER VOL VOL AUX MD TUNER TAPE CD POWER 123 456 789 0 MEMO ENTER DOLBY C.RESET TIME REPEAT RANDOM CD SYNC.
13 ENGLISH • Because CD synchro recording will start from the front side, be sure the erase-protection tab of the front side. • Only when the both of the erase-protection tabs on the tape are in place, CD synchro recording can be performed on both sides.
14 ENGLISH T roubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY No power No sound Distorted or abnormal sound Vibrating sound Too noisy No recording • The AC input cord is disconnected. • The POWER(ON/STANDBY) button is not pressed completely. • Unrecorded tape is loaded.
15 ENGLISH Specifications Type ........................................................................................ Stereo full logic cassette deck wi th Dolby B NR system Track system ..............................................................
5707-21050-008-0.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sherwood DS-801 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sherwood DS-801 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sherwood DS-801 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sherwood DS-801 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sherwood DS-801, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sherwood DS-801.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sherwood DS-801. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sherwood DS-801 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
