Manuale d’uso / di manutenzione del prodotto XV-Z7000U del fabbricante Sharpvision
Vai alla pagina of 48
E-1 Important Information IMPOR T ANT For your assistance in r eporting the loss or theft of your Color LCD Pr ojector , please record the Serial Number located on the bottom of the pr ojector and retain this information.
E-2 Important Information ENGLISH WARNING: The cooling fan in this projector continues to run for about 90 seconds after the pr ojector is tur ned off. During normal operation, when tur ning the power of f always use the ON/OFF button on the projector or the PO WER button on the remote contr ol.
E-3 Important Information Electrical energy can perform many useful functions. This product has been engineered and manufactur ed to ensure your personal safety .
E-4 Important Information Outstanding Features 1. FOR USE WITH DTV Allows pr ojection of DTV images and 16:9 wide-screen images when connected to a DTV decoder or similar video systems. (Page 11) 2. AD V ANCED VIDEO CIRCUITR Y Provides high quality images with minimal dot crawl and cr oss color noise.
E-5 Important Information Important Information Contents IMPOR T ANT SAFEGU ARDS …………………… 3 Outstanding Features …………………………… 4 For SHARP Assistance (U .
E-6 Important Information Usage Guidelines 95 ˚ F ( Ⳮ 35 ˚ C) 41 ˚ F ( Ⳮ 5 ˚ C) T emperature Monitor Function If the projector starts to overheat due to setup problems or a dirty air filter , “ TEMP . ” will appear in the lower -left cor ner of the pictur e.
E-7 Important Information P ar t Names PICT MODE/ENTER button Pr ojector Numbers next to the part names refer to the main pages in this manual wher e the topic is explained.
E-8 Important Information Fr ont View P ar t Names T op Vie w Remote Control VOL POWER MUTE BACK MENU ENTER RGB/ COMPONENT INPUT 1 PICT MODE AUTO SYNC INPUT 2 GAMMA KEYSTONE VIDEO FREEZE S-VIDEO CLR T.
E-9 Important Information P ar t Names P ositioning the Remote Control The remote contr ol can be used to control the projector within the ranges shown below . • The signal from the r emote control can be reflected of f a scr een for easy operation.
E-10 Setup & Connections Setup & Connections Supplied Accessories Rubber leg tips for remote contr ol GLEGG9095CEZZ.
E-11 Setup & Connections Connecting the P ower Cor d Plug the supplied power cor d into the AC socket on the back of the projector . Power cord CACCU5013DE01 Connecting the Pr ojector 1 Connect on.
E-12 Setup & Connections INPUT 2 N ENT AUDIO INPUT RGB /COMPONENT P R (INPUT 1, 2) RS-232C INPUT 1 INPUT 2 /COMPONENT AUDIO INPUT RGB /COMPONENT P R P B Y (INPUT 1, 2) Connecting the Projector Con.
E-13 Setup & Connections Connecting the Projector.
E-14 Setup & Connections RS-232C INPUT 1 /COMPONENT AUDIO INPUT P R P B Y (INPUT 1, 2) Connecting RS-232C P or t When the RS-232C port on the projector is connected to a computer with an RS-232C cable (null modem, cr oss type, sold separately), the computer can be used to contr ol the projector and check the status of the pr ojector .
E-15 Operation Operation Basic Operations 1 Make the necessary connections before pr o- ceeding. Connect the power cor d to a wall outlet. The POWER indicator illuminates r ed and the projector enters standby mode. • If the side filter cover is not securely installed, the POWER indicator flashes.
E-16 Operation Basic Operations Projector Remote control EXAMPLE f 5 d g s 6 7 8 INPUT 1 Mode INPUT 2 Mode VIDEO Mode S-VIDEO Mode 5 Press INPUT on the pr ojector , INPUT 1 , INPUT 2 , S-VIDEO or VIDEO on the r emote control to select the desired input mode.
E-17 Operation Position the pr ojector perpendicular to the screen with all feet flat and level to achieve an optimal image. Move the pr ojector forward or backward if the edges of the image ar e distor ted. • The projector lens should be center ed in the middle of the screen.
E-18 Operation Setting up the Screen Using the Adjustment Feet Y ou can adjust the height of the image by raising the projector with the foot releases. 1 Press the foot r eleases and lift the projector to the desir ed angle. (Adjustable up to approximately 7 ° fr om the standard position.
E-19 Operation Setting up the Screen Projector Digital K eystone Correction Remote control • When the image is distorted due to the projection angle, the digital keystone corr ection function allows you to corr ect it.
E-20 Operation Using the GUI (Graphical User Interface) Men u Screens (GUI) On-screen Displa y INPUT 1 or 2 (COMPONENT) mode Projector Remote control This pr ojector has three sets of menu screens (INPUT 1 or 2 (COMPONENT), INPUT 2 (RGB) and S-VIDEO or VIDEO) that allow you to adjust the image and various projector settings.
E-21 Operation Items on the INPUT 1 or 2 (COMPONENT) Mode Menu Bar Using the GUI (Graphical User Interface) Menu Screens Items on the INPUT 2 (RGB) Mode Menu Bar Main menu Main menu Sub menu Sub menu *1 “ Signal T ype ” does not appear when the INPUT 1 (COMPONENT) mode is selected.
E-22 Operation *3 “ Tint ” does not appear when r eceiving “ PA L ” , “ SECAM ” , “ P AL M ” , “ P AL N “ or “ P AL (60Hz) ” in the S-VIDEO or VIDEO mode.
E-23 Operation Selecting the On-screen Displa y Language Projector (GUI) On-screen Displa y English is the preset language for the On-scr een Display . The language can be set to English, German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese.
E-24 Operation All image adjustment items are returned to the factory preset settings. Picture Adjustments Adjusting the Picture Y ou can adjust the projector ’ s picture to your prefer - ences with the following picture settings.
E-25 Operation Picture Adjustments Projector Remote Control Selecting the Signal T ype This function allows you to select the input signal type (RGB or COMPONENT) for INPUT 2 port. 1 Press MENU . 2 Press ∂ / ƒ to select “ Pictur e ” in INPUT 2 (RGB) mode, and then press ENTER .
E-26 Operation Computer Ima g e Adjustments (INPUT 2 (RGB) mode onl y) A uto Sync Adjustment • Used to automatically adjust a computer image. • Auto Sync adjustment can be made manually by pressing A UT O SYNC .
E-27 Operation Computer Image Adjustments (INPUT 2 (RGB) mode only) Adjusting the Computer Image When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), inter fer ence may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen.
E-28 Useful Features Useful Features Freeze Function This function allows you to instantly freeze a moving image. This is useful when you want to display a still image from a computer or video, giving you mor e time to explain the image to the audience.
E-29 Useful Features Adjusting the Color T emperature Remote control This function can be used to adjust the color temperature to suit the type of image input to the projector (video, computer image, TV br oadcast, etc.). Decrease the color temperatur e to create warmer , reddish images for natural flesh tones.
E-30 Useful Features Gamma Correction • Gamma is an image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering the brightness of the brighter portions. • Three gamma settings ar e available to allow for differ ences in the images displayed and in the brightness of the r oom.
E-31 Useful Features Selecting the Picture Displa y Mode Remote control This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose the picture display mode pr eferred.
E-32 Useful Features This function allows you to check the current input signal information and the accumulated lamp usage time. 1 Press MENU . 2 Press ∂ / ƒ to select “ Options ” , and then pr ess ENTER . The current input signal information and the lamp usage time will be displayed.
E-33 Useful Features Selecting a Bac kgr ound Imag e This function allows you to select the image displayed when no signal is being sent to the pr ojector . Description of Backgr ound Images 1 Press MENU . 2 Press ∂ / ƒ to select “ Options ” , and then pr ess ENTER .
E-34 Useful Features Rever se/In ver t Ima g e Function This projector is equipped with a r everse/inver t image function which allows you to reverse or invert the pr o- jected image for various applications.
E-35 Maintenance & T roubleshooting Air Filter Maintenance Maintenance & T r oub leshooting Air Filter Maintenance Right Side Vie w Air filter • This projector is equipped with an air filter to ensur e the optimal operating condition of the pr ojector .
E-36 Maintenance & T roubleshooting Air Filter Maintenance 1 3 2 Remove the filter co ver . 1 Remove the air filter stopper . 2 Remove the air filter . T ur n over the projector . Press the tab and remove the filter cover in the direction of the ar row .
E-37 Maintenance & T roubleshooting Lamp/Maintenance Indicator s Maintenance Indicator s POWER LAMP TEMP. ON/OFF KEYSTONE • The warning lights on the projector indicate problems inside the projector .
E-38 Maintenance & T roubleshooting VOL POWER MUTE BACK MENU ENTER ON/OFF POWER Replacing the Pr ojection Lamp • Be sure to r emove the lamp cage by the handle. Be sure not to touch the glass surface of the lamp cage or the inside of the projector .
E-39 Maintenance & T roubleshooting Replacing the Projection Lamp 7 Remove the lamp ca ge cover . T ur n over the projector and loosen the user service screw that secur es the lamp cage cover . Then lift open the cover in the direction of the arr ow .
E-40 Maintenance & T roubleshooting Using the Kensington Loc k This projector has a Kensington Security Standar d connector for use with a Kensington Micr oSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector .
E-41 Appendix Appendix Attaching the Lens Cap Put on the lens cap to pr event damage to the lens when transporting the projector . A lens cap strap is provided to pr event the loss of the lens cap. 1 Attach the lens cap strap to the lens cap. 2 Attach the lens cap strap to the pr ojector .
E-42 Appendix Connection Pin Assignments INPUT 2 P or t: 15-pin mini D-sub female connector Computer Input Analog 1. Video input (r ed) 2. Video input (green/sync on gr een) 3. Video input (blue) 4. Not connected 5. Composite sync 6. GND (red) 7. GND (green/sync on green) 8.
E-43 Appendix PC contr ol A computer can be used to contr ol the projector by connecting an RS-232C cable (null modem, cr oss type, sold separately) to the pr ojector . (See page 14 for connection.) Comm unication conditions Set the serial port settings of the computer to match that of the table.
E-44 Appendix CONTROL ITEM COMMAND C1 A A P P I I I I I M M M M M M M M M M M M M M M M M M M V V V V V V V V V R R R R R P P O O V V R R C E E E E E E E E E E E E E E E E E E E A A A A A A A A A A A .
E-45 Appendix Horizontal Frequency: 15 – 80 kHz V er tical Frequency: 43 – 85 Hz Pixel Clock: 12 – 108 MHz Compatible with sync on green and composite sync signals SXGA (1,280 1,024) compati.
E-46 Appendix Specifications Pr oduct type Model Video system Display method LCD panel Lens Projection lamp Contrast ratio Video input signal S-video input signal Component input signal Horizontal res.
E-47 Appendix RS-232C INPUT 1 INPUT 2 /COMPONENT AUDIO INPUT RGB /COMPONENT C R C B Y (INPUT 1, 2) 100-240V ON/OFF POWER LAMP TEMP. KEYSTONE INPUT BACK ENTER MENU PICT MODE.
E-48 Appendix Active digital ke ystone correction Corrects keystone distortion caused when the projected image is not perpendicular to the scr een. This method provides not only horizontal cor rection, but vertical as well, thus maintaining the original 4:3 aspect ratio and eliminating jag lines.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sharpvision XV-Z7000U è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sharpvision XV-Z7000U - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sharpvision XV-Z7000U imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sharpvision XV-Z7000U ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sharpvision XV-Z7000U, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sharpvision XV-Z7000U.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sharpvision XV-Z7000U. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sharpvision XV-Z7000U insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
