Manuale d’uso / di manutenzione del prodotto QSINUFO del fabbricante Sharp
Vai alla pagina of 41
O p e r a t i n g I n s t r u c t i o n s Network Camera Operating Instructions QSINUFO ` 1.
O p e r a t i n g I n s t r u c t i o n s Please read this manual before us ing and save this manual for f uture reference. Intr oduction Please check the following items when unpacking . A C a d a p t o r — 1 pc. I / O p o r t l i n k l i n e — 1 pc.
O p e r a t i n g I n s t r u c t i o n s T able of Contents 1. Pr oduct Intr od uction ............................................................ 4 1.1 Getting t o know the Net work Camera ...........................................................
O p e r a t i n g I n s t r u c t i o n s 2.3.14 PTZ Control Se ttings............................................................................................ 30 2.3.15 Other setting s ..............................................................
O p e r a t i n g I n s t r u c t i o n s 1.1.2 System Requir ements The PC and the network must meet the fo llowing technical specif ications for the Network Camera to work properly . Item Description Operating System Microsoft W indows 98 Microsoft W indows 2000, Microsoft W indows ME Microsoft W indows NT® 4.
O p e r a t i n g I n s t r u c t i o n s 1.2.2 Rear V iew From left to right: RJ45: 100 Base-T：Ethernet Indicator I/O：Including two I/O inputs and two I/O outputs. COMM port: including one RS-232 and one RS-4 85and one LINE OUT。 BNC port: video output.
O p e r a t i n g I n s t r u c t i o n s 2.Hub Connection needs category 5 straight cable and PC Connection needs category 5 cross cable. 3.LAN (Intranet) 、 Internet Connection with Ethernet Switching Hub Network Camera can be installed on the LAN.
O p e r a t i n g I n s t r u c t i o n s 1.3.2 Confirming the Network Camera Setting T o confirm if the Network Camera is configured correctly , please access to T op Page. If the T op Page appears, your Network Configuration is completed. 1. S tart up the web browser .
O p e r a t i n g I n s t r u c t i o n s permission to download ActiveX Controls (O CX file) us ed to di splay motion video. Please allow the file to be installe d. It is required and will not cause any problems with other applica tions on the PC. Use r eset key IP will be changed to 192.
O p e r a t i n g I n s t r u c t i o n s C:> arp -d C:> arp -s 192.168.1.61 00 -0c-e8-00-00-01 C:> ping -t 192.168.1.61 Pinging 192.168.1.61 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Reply from 192.168.1.
O p e r a t i n g I n s t r u c t i o n s 2. Network Camera Scr een and Setup window 2.1 Network Camera V iew Image The view image enables you to access to the T op V iew Image screen (Single Camera/Multi-Camera screen). Authentica tion window can set password for the link at.
O p e r a t i n g I n s t r u c t i o n s 1. V iew Image Single Camera / Multi-Camera 2. System Configuration 3. Help 4. Language : English Chinese . 2.2 V i ewing the T op V iew Image scr een The T op V iew Image screen consists of Single Cam era and Multi-Camera screen.
O p e r a t i n g I n s t r u c t i o n s Brightness Brightness contro l has 17 steps in cluding Saturation Saturation contro l has 9 steps including V olume V olume control has 10 steps including Iris Adjust Iris Resolution Selects 640X 480, 320X240 (default) or 160X120.
O p e r a t i n g I n s t r u c t i o n s U s e r : a d m i n P a s s w o r d : a d m i n System Configuration 14.
O p e r a t i n g I n s t r u c t i o n s Network Configures the network setting Date/T ime Sets the network Date and T ime Administrator Sets administrator ID and password for the security . General User Sets General User ID and password for the security .
O p e r a t i n g I n s t r u c t i o n s Event V iewer Show the event properties: message type and alarm type, ID, time. PTZ PTZ PTZ control settings. Restart Restart the network camera. Reset Setting Reset the video se rver form factory default. System information Show system information.
O p e r a t i n g I n s t r u c t i o n s Network Name 4 to 15 English letters ， 2 to 7 Chinese characte rs Port No. Set to 80. (Default) IP Address and Subnet Mask Check S tatic and set Static IP address and Subnet Mask.
O p e r a t i n g I n s t r u c t i o n s 2.3.2 Date/T ime Item Instructions Limitation 1. Date and T ime Display current Camera date and time. 2. Set Network Camera Date and Ti m e Network Camera can adjust the internal clock.
O p e r a t i n g I n s t r u c t i o n s 2.3.3 Administrator Administrator window allows the administra tor to lim it or exclude the access to selected Network Camera feature.
O p e r a t i n g I n s t r u c t i o n s 2.3.4 General User General User window allows the administrator to create the General User ID and password for the security level defined as General User . User Name List: User Name List displays th e registered user name.
O p e r a t i n g I n s t r u c t i o n s 2.3.5 V ideo Settings [V ideo Adjust ]: Permit General User adjust. [Header Display]: Display the network camera name, date and tim e. [Image Mirror]:you can browse the image like look into the mirror . [BLC Control]:enable BLC.
O p e r a t i n g I n s t r u c t i o n s 2.3.6 Multi-server Multi-Camera window enables the setti ng of Multi-Camera screen. 2nd to 4th cameras are named on this Multi-Cam era window .
O p e r a t i n g I n s t r u c t i o n s 2.3.7 I/O Ports Setup alarm occur condition: when the electricity falling. when the electricity rising. output ports status :high imp edance and low impedance.
O p e r a t i n g I n s t r u c t i o n s 2.3.8 T imer Captur e The timer m ode can be acti vated by ent ering the a ctive tim e. Y ou can set eight timers of every week.
O p e r a t i n g I n s t r u c t i o n s 2.3.9 Motion Detect Setup the alarm scope of motion detection. 25.
O p e r a t i n g I n s t r u c t i o n s 2.3.10 Constant Recording [Constant Recording]: Permit constant recording or not. [Image Setting]: Set the image resolution and image quality . Image resolution: 640 x 480/320 x 240/160 x 120 Image quality: Favor Clarity/S tandard/Favor Motion [Image Frequency]: Sets the interval to send the im age.
O p e r a t i n g I n s t r u c t i o n s 2.3.1 1 Event Manage [Event Source Select]:I/O port Occur T ra nsfer in the Alarm Mode T i m e r O c c u r T ransfer in the T im er Mode M o t i o n D e t e c t i o n O c c u r The Alarm mode and the motion detecti on mode can transfer the image via e-mail or FTP when the alarm trigger is ac tive.
O p e r a t i n g I n s t r u c t i o n s [Image Setting]: Set the image resolution Image resolution: 640 x 480/320 x 240/160 x 120 [Image Buf fer Setting]: [Over Buf fer Setting]:over write the buf fer or not when the buf fer is full. [FTP Server]: Enters the server addre ss or Host Name, Port no.
O p e r a t i n g I n s t r u c t i o n s 2.3.13 Event Pr operties Show the event properties. Message type ,alarm type , alarm id and alarm tim e. 29.
O p e r a t i n g I n s t r u c t i o n s 2.3.14 PTZ Contr ol Settings [PTZ Control]: Permit General User control or not. [COM Settings]: Sets baud rate.
O p e r a t i n g I n s t r u c t i o n s 2.3.15 Other settings Restart the network camera. 31.
O p e r a t i n g I n s t r u c t i o n s Reset the video server form factory default. The IP will be changed to 192.168.1.252. Show the system information: firmware version and software version.
O p e r a t i n g I n s t r u c t i o n s Select the language : Chinese or English. 33.
O p e r a t i n g I n s t r u c t i o n s 5. T echnical Guides 3.1 Maintenance T o keep the Network Camera in the good condition, m aintenance plays an important part. Please keep maintenance when using the Network Camera. Network Camera • Network Camera is intended for indoor use only .
O p e r a t i n g I n s t r u c t i o n s Explanation of I/O Connector ： Pin Function 1 I/O-IN (1) 2 I/O-OUT (1) 3 + 1 2 V ( < 1 0 0 m A ) 4 DGND 5 I/O-IN (2) 6 I/O-OUT (2) 2.
O p e r a t i n g I n s t r u c t i o n s Explanation of COMM Connector ： ： PIN Function 1 232/(RXD UFO-II-H Å ) 2 DGND 3 232/(TXD UFO-II-H Æ ) 4 DGND 5 LINE OUT 6 AGND 7 485/(B UFO-II-H Å ) 8 485/(A UFO-II-H Æ ) 3.
O p e r a t i n g I n s t r u c t i o n s 4 AWB 4. LENS 2 1 4 3 Explanation of Connector ：： No. 名称 1 DAMP- 2 DAMP+ 3 DRIVE+ 4 DRIVE- 6. Specifications and T r oubleshooting 6.
O p e r a t i n g I n s t r u c t i o n s Item UFO- Ⅱ-L networ k camera Network Prot ocols TCP/IP, HTTP, FTP, SMTP, DDNS, DNS，DHCP, PPPOE Network Connection MODEM、ISDN、XDSL、LAN CPU 32 bits.
O p e r a t i n g I n s t r u c t i o n s Video control • A WB: White Balance (A TW/Push/Indoor/Outdoor) • AGC: Auto matic Gain Control (On/Off) • Manual Electroni c Shutter (1/50 or 1/60 when AES off) • Auto DC IRIS • Auto Electronic Shutt er (AES on/off, BL C on/of f) • Day/Night fea ture (Color/B.
O p e r a t i n g I n s t r u c t i o n s When the T op Page does not appear . • Enter the correct IP address set up to the Network Camera. • IP address of the PC and the Network Camera must be in the same class of the private IP address on the LAN.
O p e r a t i n g I n s t r u c t i o n s 3) If the unit has been exposed to rain or water . 4) If the unit does not work nor mally by following th e operating instructions. 5) If the unit has been dropped or physically damaged. 6) If the unit exhibits a distin ct change in perform ance.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sharp QSINUFO è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sharp QSINUFO - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sharp QSINUFO imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sharp QSINUFO ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sharp QSINUFO, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sharp QSINUFO.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sharp QSINUFO. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sharp QSINUFO insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
