Manuale d’uso / di manutenzione del prodotto MD-MT877 del fabbricante Sharp
Vai alla pagina of 60
PORT ABLE MINIDISC RECORDER Thank you for purchasing this SHARP product. For the best performance, read this manual carefully . It will guide you in operating your SHARP product.
Accessories Notes: ● Parts and equipment mentioned in this operation manual other than those detailed above are not included. ● The AC adaptor may be different from the one in the drawing.
Contents Important Introduction Special Notes ................................................ 4-5 Precautions ....................................................... 6 Names of Controls and Indicators .............. 7-9 Battery Charger ..............
4 Important Introduction – Special Notes – Special Notes ● It is the intent of Sharp that this product be used in full compliance with the copyright laws of the United States and that prior permission be obtained from copyright owners whenever necessary .
DEUTSCH FRAN Ç AIS ESP A Ñ OL SVENSKA IT ALIANO NEDERLANDS ENGLISH 5 Special Notes Special Notes : continued Important Introduction – Special Notes – Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
6 Important Introduction – Precautions – Precautions Important ● Do not wear your earphones when you are crossing streets or near traffic. ● Do not use your earphones while driv- ing a motor vehicle, it may create a traf- fic hazard and may be illegal.
DEUTSCH FRAN Ç AIS ESP A Ñ OL SVENSKA IT ALIANO NEDERLANDS ENGLISH 7 Important Introduction – Names of Controls and Indicators – Names of Controls and Indicators Main unit 13 14 15 12 2 1 3 4 5 6 7 8 9 10 11 1. Record/T rack Mark Button (20, 34) 2.
8 Important Introduction – Names of Controls and Indicators – 0 1. Level Meter 0 2. Record Indicator 0 3. Synchro Recording Indicator 0 4. Operation Indicator 0 5. Long-play/Recording Mode Indicator 6. Character/Time Information Indicator 7. Repeat Indicator 8.
DEUTSCH FRAN Ç AIS ESP A Ñ OL SVENSKA IT ALIANO NEDERLANDS ENGLISH 9 0 1. Record Indicator 0 2. T rack Number Indicator 0 3. Operation Indicator 0 4. Character/T ime Information Indicator 0 5. Battery Indicator 0 6. Random Indicator 0 7. Synchro Recording Indicator 0 8.
10 Important Introduction – Battery Charger – Battery Charger There are two dif ferent ways to use the battery charger one is to use it as a normal battery charger , the other is to use it with an AC adaptor by attaching the portable MD to the battery charger .
DEUTSCH FRAN Ç AIS ESP A Ñ OL SVENSKA IT ALIANO NEDERLANDS ENGLISH 11 Important Introduction – Battery Charger – About the Battery Charger : continued 2 1 How to use the Charge / Operation switc.
12 Power Source – Using with the Rechargeable Battery – Using with the Rechargeable Battery Charging When the rechargeable battery is used for the first time or when you want to use it after a long period of disuse, be sure to charge it fully . ● After the rechargeable battery is charged or used, it will get slightly warm.
DEUTSCH FRAN Ç AIS ESP A Ñ OL SVENSKA IT ALIANO NEDERLANDS ENGLISH 13 Caution: ● Use the specified battery AD-N55BT only . Do not charge a battery (nickel-cadmium, alkaline, etc.) other than that specified. ● Do not remove the outer cover of the re- chargeable battery .
14 Using with the AC Adaptor 1 Place the portable MD to the battery charger . 2 Move the Charge/Operation switch to the operation mode. 3 Plug the AC adaptor . Caution: ● If the Charge/Operation switch is not set to the opera- tion mode, no operation is possible.
DEUTSCH FRAN Ç AIS ESP A Ñ OL SVENSKA IT ALIANO NEDERLANDS ENGLISH 15 Use one commercially available alkaline battery (LR6, “ AA ” size). When using the alkaline batteries, make sure the recharge- able battery is inserted. Caution: Do not use rechargeable batteries (nickel-cadmium bat- tery etc.
16 Preparation – Hold Function – Hold Function The present operation condition can be kept even if other buttons are accidentally pressed in a place such as a crowded train. T o cancel the hold mode Move the HOLD switch away from the safety posi- tion (the opposite direction of the arrow).
17 Inserting a MiniDisc 1 Slide the OPEN lever to release the com- partment door . 2 Lift it up. 3 Insert a MiniDisc as shown. 4 Close the compartment door . Notes: ● Do not place the MiniDisc under the holder . ● If any resistance is felt, do not force the MiniDisc into the unit, as it may cause damage to the unit.
18 LINE OUT RIGHT LEFT Connections T o an AC outlet T o the DC IN 5V jack Red : T o Right White : T o Left T o the OPTICAL/ LINE IN jack T o a stereo system with “ LINE OUT ” or “ AUDIO OUT ” jacks (See left, Analog connection.
19 DIGIT AL OUT Preparation – Connections – Connections : continued T o connect to a stereo system with a “ DIGIT AL OUT ” or “ OPTICAL OUT ” jack T o a stereo system with a “ DIGIT AL OUT ” jack (See left, Digital connection.) Compared to analog connection recording, it allows a high-quality recording.
20 Recording Basic Operation – Recording – As for the details, see page 16. Before Recording Cancel the hold mode. The portable MD does not work while in the hold mode.
21 Basic Operation – Recording – Recording : continued Notes: ● When recording, it is recommended to use the AC adap- tor and also install the charged battery . Should the power failure occur , the power source would be automatically switched to the rechargeable battery .
22 Basic Operation – Recording – Recording (continued) TOC display About the TOC After any recording or editing function “ TOC ” (T able Of Contents) is displayed. T o finalize the recording or editing function, press the • ■ / :OFF button.
23 Basic Operation – Recording – Recording Helpful tip when attaching a label When attaching a label to a MiniDisc cartridge, be sure to note the following. If the label is not attached properly , the MiniDisc may jam inside the unit and it may not be pos- sible to remove it.
24 Basic Operation – Playback – Playback T o the jack Main unit Remote control unit Release As for the details, see page 16. Before Playing back Cancel the hold mode.
25 Basic Operation – Playback – 1 Insert the earphones plug firmly into the earphones jack on the remote control unit. 2 Plug the remote control into the jack on the unit.
26 Basic Operation – Playback – Playback (continued) Notes: ● If power failure occurs while playing a disc using the AC adaptor , disconnect it from the AC outlet.
27 T o locate the next track: Press the 4 button while the unit is stopped. T o locate the previous track: Press the 5 button while the unit is stopped. ● T o skip a number of tracks at one time, press the 5 5 5 5 5 or 4 4 4 4 4 button repeatedly until the desired track num- ber is shown.
28 Advanced playback (continued) Useful Features – Advanced Playback – Intro play Y ou can listen to each track for approximately 5 sec- onds. When stopped or paused, press the 06 button for 2 seconds or more. When the playback mode is set as random playback, random repeat playback, or one-track repeat playback, the intro scan is not possible.
29 Useful Features – Advanced Playback – Random play or repeat play During playback, press the MODE button repeat- edly to select the playback mode. Notes: ● If the playback mode is selected while stopped, press the 06 button to start playback. ● When “TOC” is displayed, random play or repeat play is impossible.
30 Advanced Recording 1 Press the REC button. 2 Begin playback on the stereo system con- nected to this portable MD. Playback sound-actuated recording (Synchronized recording) Recording automatically starts or pauses by detect- ing sound from the stereo system (Synchronized recording).
31 Useful Features – Advanced Recording – Note: T o keep a track after the point you want to make a new recording, move the track and then make recording after that point. (See “ Editing a Recorded MiniDisc ” , page 50.) 1 During playback, press the 06 06 06 06 06 button at the point where you want to begin recording.
32 Useful Features – Advanced Recording – Advanced Recording (continued) 1 When a recording is paused, press the MODE button repeatedly to select the re- cording mode. Each time the button is pressed, the display will change as follows: 2 Start recording.
33 Useful Features – Advanced Recording – Notes: ● T racks can be recorded in the stereo recording mode, 2 times long recording mode, and 4 times long recording mode on one MiniDisc. ● In monaural recording, the sound on the right and left channels is mixed even if the input source is in stereo.
34 T o create your own track numbers Y ou can create your own track numbers at any point. While recording, press the REC button at the point where you want to create track numbers. The track number will be increased by one. ● One track number will be created every time the REC button is pressed.
35 Useful Features – Advanced Recording – Advanced Recording (continued) About track numbers 1. T rack numbers are created automatically during re- cording via the analog connection when a silence of 1 second or more is detected (Auto marker function).
36 Useful Features – Recording from a Microphone – T o record from a microphone 1 Connect a stereo microphone to the MIC IN jack. 2 Insert a recordable MiniDisc (page 17). T o interrupt a recording Press the 06 button while recording. T o resume recording, press the 06 button again.
37 Useful Features – Recording from a Microphone – Notes: ● While making a mic recording, do not connect anything to the OPTICAL/LINE IN jack on the portable MD.
38 Useful Features – Recording from a Microphone – T rack intervals When recording from the microphone, track num- bers will be created automatically at regular inter- vals (default setting: approximately every 5 minutes). During a mic synchro recording, the unit pauses when a silence lasts for 3 seconds or more, and cre- ates a track number .
39 Useful Features – Checking Displays – Checking Displays T o check the remaining recording time and the total playing time While in the stop mode, press the DISP button.
40 Useful Features – Checking Displays – T o display the playing time of an indi- vidual track 1 While in the stop mode, press the 5 5 5 5 5 or 4 4 4 4 4 button to display the track number and track name. 2 Press the DISP button to display the play- ing time for that track.
41 Useful Features – Changing Default Settings – Changing Default Settings 1 With a MiniDisc inserted, press the MODE button for 2 seconds or more. “ SET UP ” will appear . When you release the button, “ BEEP ON ” or “ BEEP OFF ” will appear .
42 Useful Features – Changing Default Settings – Changing Default Settings (continued) Beep sound Y ou can eliminate the confirmation sound that beeps when you press a button. Auto play Y ou can make the unit not play automatically when you insert a playback-only MiniDisc or an accidental erasure protected MiniDisc.
43 3 Press the DISP button repeatedly to select the type of characters. The first 3 characters in the group of the selected characters will be displayed for about 1 second. 4 Press the 5 5 5 5 5 or 4 4 4 4 4 button repeatedly to select the letter . 5 Press the ENTER button to enter it.
44 Advanced Features – Titling a MiniDisc – Characters (symbols) T o erase a character Press the VOL + or VOL – button to move the cursor to the character you want to erase, and then press the BASS button. T o enter a space Press the VOL + button to move the cursor to the right.
45 Advanced Features – Titling a MiniDisc – T o add characters 1 Put the unit in the character input mode. (Perform steps 1 - 2 on page 43.) 2 Press the VOL + or VOL – button to move the cursor to the right of the character, where you want to add a new character.
46 1 Insert a Master MiniDisc. Do not mistake the Master MiniDisc for the target one. 2 While in the stop mode, press the EDIT but- ton repeatedly to select “ NAME ST AMP ” . 3 Press the ENTER button. T o cancel the operation, press the • ■ / :OFF button.
47 Advanced Features – Titling a MiniDisc – T itling a MiniDisc : continued Note: If the total number of tracks on the master MiniDisc does not match that on the MiniDisc for stamping, the unit will display “ Can't ST AMP ” and turn off the power .
48 Editing a Recorded MiniDisc 1 Start playing the track to be erased, and press the 06 06 06 06 06 button. 2 Press the EDIT button repeatedly to select “ ERASE ” . 3 Press the ENTER button. T o cancel the operation, press the • ■ / :OFF button.
49 T o divide a track 1 Start playing the track to be divided into two. Press the 06 06 06 06 06 button at the point where you want to divide the track. 2 Press the EDIT button repeatedly to select “ DIVIDE ” . 3 Press the ENTER button. T o cancel the operation, press the • ■ / :OFF button.
50 T o move a track 1 Play the track to be moved, and press the 06 06 06 06 06 button. 2 Press the EDIT button repeatedly to select “ MOVE ” . 3 Press the ENTER button. T o cancel the operation, press the • ■ / :OFF button. 4 Press the 5 5 5 5 5 or 4 4 4 4 4 button to select the direction.
51 Advanced Features – Listening to a MiniDisc Through a Stereo System or a Car Stereo – Listening to a MiniDisc Through a Stereo System or a Car Stereo Notes: ● It is recommended that the volume level of the MiniDisc unit be set to maximum when listening through a stereo system.
52 References – Other Features and Caution – Resuming auto play ■ When you stop playback and replay the MiniDisc without removing it, playback starts from the point you stopped it. ■ Once you remove the MiniDisc, playback starts from the first track.
53 The unit may have the following symptoms while recording or editing. The unit is not out of order . MiniDisc System Limitations References – MiniDisc System Limitations – SYMPTOM “ DISC FULL ” or “ TOC FULL ” appears even though the MiniDisc still has re- cording time left.
54 References – Error Messages – Error Messages ERROR MESSAGES BA TT EMPTY (LoBA TT) BLANK MD (BLANK) Can ’ t COPY (Can ’ tC) Can ’ t EDIT (Can ’ tE) Can ’ t READ * (Can ’ tS) (Can ’.
55 References – Error Messages – Error Messages : continued ERROR MESSAGES NO DISC NO SIGNAL (noSIG.) PLA Y MD (PLA Ymd) POWER ? PROTECTED SORR Y (Sorry) TEMP OVER (TEMP!) TOC FORM ** (Tform**) TOC FULL T r. Protect ? DISC (? DISC) MEANING ● A disc has not been loaded.
56 Troubleshooting References – T roubleshooting – Many potential “problems” can be resolved by the owner without calling a service technician. If something seems to be wrong with this product, check the following before calling your authorized SHARP dealer or service center .
57 References – Maintenance – Troubleshooting : continued If trouble occurs When this product is subjected to strong external in- terference (mechanical shock, excessive static elec- tricity , abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly , it may malfunction.
58 References – Specifications – Specifications As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.
59 References – Specifications – Specifications Rotation speed Approx. 400 – 1,350 rpm Error correction ACIRC (Advanced Cross Interleave Reed-Solomon Code) Coding A TRAC/A TRAC3 (Adaptive TRansform Acoustic Coding), 24-bit computed type Recording method Magnetic modulation overwrite method Sampling frequency 44.
Printed in Malaysia A0101.TO TINSZ0639A WZZ SHARP ELECTRONICS CORPORA TION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORA TION 9906 CONSUMER LIMITED W ARRANTY SHARP ELECTRONICS CORPORA TION .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sharp MD-MT877 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sharp MD-MT877 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sharp MD-MT877 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sharp MD-MT877 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sharp MD-MT877, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sharp MD-MT877.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sharp MD-MT877. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sharp MD-MT877 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
