Manuale d’uso / di manutenzione del prodotto AY-ZP48LZ del fabbricante Sharp
Vai alla pagina of 20
AIR-TO-AIR HEA T PUMP OPERA TION MANUAL * Plasmacluster is a trademark of SHARP Corporation. INDOOR UNIT OUTDOOR UNIT A Y -ZP48LZ AE-Z48LZ.
.
1 This manual explains the proper use of your new heat pump. Please read this manual carefully before using the product. This manual should be kept in a safe place for handy reference. IMPORTANT SAFETY INSTRUCTIONS W ARNINGS FOR USE 1 This model should be installed with a fixed power cord to the meter box.
2 P ART NAMES INDOOR UNIT 1 Inlet (Air) 2 Open Panel 3 Air Filter 4 Air purifying fi lter 5 AUX Button 6 Receiver Window 7 V ertical air fl ow Louvre 8 Horizontal air fl ow Louvre 9 Outlet (Air) 0 .
3 REMOTE CONTROL 1 TRANSMITTER 2 DISPLA Y 3 COOL Button 4 DRY Button 5 HEA T Button 6 STOP Button 7 THERMOST A T Button 8 PLASMACLUSTER Button 9 SPOT AIR Button 0 FULL POWER Button q F AN Button w 1.
4 SET CURRENT CLOCK TIME There are two clock modes: 12-hour mode and 24-hour mode. Example: 5 o’clock in the afternoon Clock Display 12-hour mode PM 5:00 24-hour mode 17:00 1 T o set to the 12-hour mode, press the CLOCK button once. T o set to the 24-hour mode, press the CLOCK button twice.
5 The air purifying filters are packed as accessory of this unit. During operation, the fi lters remove dust and tobacco smoke from the air and discharges clean air . 1 T ake out the air fi lters. 1 Open the open panel. 2 Push the air filters up slightly to unlock them.
6 1 Press the COOL, DR Y or HEA T button . : HEA T : COOL : DR Y • The red OPERA TION lamp ( ) on the unit will light. 2 T o change the temperature setting, press the THERMOST A T button. HEA T/COOL MODE • The temperature can be set within the range of 18°C to 32°C.
7 HORIZONT AL AIR FLOW DIRECTION 1 Press the SWING button( ). • The horizontal air fl ow louvres will swing. 2 Press the SWING button( ) again when the horizontal air fl ow louvres are at the desired position. NOTE: • The adjusted position will be memorized and will be automatically set to the same position when operated the next time.
8 SPOT AIR The louvres are adjusted so that air fl ow is delivered to the desired area. 1 Press the SPOT AIR button to select the desired air fl ow direction. NOTE: • If you want the SPOT AIR setting in the FULL POWER mode, press the SPOT AIR button during the FULL POWER operation.
9 The unit works at the maximum power and op- timum louvre direction to quickly cool or warm the room. 1 During operation, press the FULL POWER button. • The remote control will display “ ” and AIR FLOW symbol will get longer . • The temperature display will go off.
10 1 . 2 . 3 . 5h OFF TIMER When the 1 . 2 . 3 . 5h OFF TIMER is set, the unit will automatically turn off after the set time (hours). 1 Press the 1 . 2 . 3 . 5h OFF TIMER button to set the desired time. • The time setting will change as you press the button as follows.
11 TIMER ON 1 Press the TIMER ON ( ) button. 2 The TIMER ON indicator will blink; press the TIME ADV ANCE or REVERSE button to set the desired time. (The time can be set in 10-minute increments.) 3 Press the TIMER SET (SET/C) button. • The orange TIMER lamp ( ) on the unit will light.
12 PLASMACLUSTER OPERA TION Plasmacluster ions released into the room will reduce some airborne mold and viruses. 1 During operation, press the PLASMACLUSTER button. • The remote control will display “ ”. • The blue PLASMACLUSTER lamp on the unit will light up.
13 ADDITIONAL NOTES ON OPERA TION OPERA TING TEMPERA TURE RANGE V ACANCY OPERA TION Heating operation with 10°C set temperature will be performed to protect your home and furniture from frost damage, even when you are out. 1 Press the HEA T button. 2 Press the V ACANCY button.
14 MAINTENANCE AFTER HEA T PUMP SEASON 1 Operate the unit in the SELF CLEAN operation to allow the mechanism to thoroughly dry . 2 Stop the operation and turn off the circuit breaker . 3 Clean the fi lters, then reinstall them. MAINTENANCE BEFORE HEA T PUMP SEASON 1 Make sure that the air fi lters are not dirty .
15 The following conditions do not denote equip- ment malfunctions UNIT DOES NOT OPERA TE The unit will not operate if it is turned on immediately after it is turned off. The unit will not operate immediately after the mode is changed. This is to protect the unit.
16.
17.
18 Printed in Thailand TINSEA629JBRZ 09K- TH 1.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sharp AY-ZP48LZ è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sharp AY-ZP48LZ - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sharp AY-ZP48LZ imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sharp AY-ZP48LZ ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sharp AY-ZP48LZ, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sharp AY-ZP48LZ.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sharp AY-ZP48LZ. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sharp AY-ZP48LZ insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
