Manuale d’uso / di manutenzione del prodotto WaterWorks RO 2000 del fabbricante Sears
Vai alla pagina of 20
WaterWorks TM Undersink Reverse Osmosis HOME DRINKING WATER SYSTEM Model RO 2000 Installation Operation Maintenance Repair Parts IF YOU HAVE QUESTIONS WHEN INSTALLING, OPERATING AND MAINTAINING YOUR REVERSE OSMOSIS SYSTEM... CALL TOLL FREE 1-800-86 WATER System Tested and Certified to ANSI/NSF Standard 58.
- TABLE OF CONTENTS - Safety Guides ................................................ 2-3 What Your Home Drinking Water System Will Do ..................... 3 Things To Check Before You Start To Install ....................... 4-5 How To Install Your Home Drinking Water System .
- SAFETY GUIDES - DO NOT USE THE SYSTEM ON MICROBIOLOGICALLY UNSAFE WATER, OR WATER OF UNKNOWN QUALITY WITHOUT ADEQUATE DISINFECTION BEFORE OR AFTER THE SYSTEM. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts.
- THINGS TO CHECK BEFORE YOU START TO INSTALL - • PARTS IN THE SHIPPING CARTON -- Unpack the carton carefully so needed parts are not discard- ed by mistake. Included are: _ _ WATER (_ _ _ t SUPPLY _,/_1 _b') _tl SADDLE VALVE _,,_ --. RO , I ASSEMBLY _ .
- THINGS TO CHECK BEFORE YOU START TO INSTALL - REMOTE LOCATION -- You can install the RO assembly or water supply saddle valve in another place away from the RO faucet (please see page 2O). • REPLACING ANOTHER RO SYSTEM -- We suggest you remove all parts of another RO system, and use everything included with your new RO system.
- HOW TO INSTALL YOUR HOME DRINKING WATER SYSTEM - STEP 1 -- INSTALL THE COLD WATER SUPPLY SADDLE VALVE (FIG. 2) • Install this valve on the COLD water pipe to the kitchen sink (FIG. 2). • This valve has a cutting pin and will make its own hole in copper or plastic pipe.
- HOW TO INSTALL YOUR HOME DRINKING WATER SYSTEM - INSTALL THE DRAIN ADAPTER • Use FIG. 3 and the following guides. Note: Consult a plumber if you are not familiar with plumbing procedures• 1. Use a ferrule and nut to assemble the drain tubing connector to the drain adapter.
- HOW TO INSTALL YOUR HOME DRINKING WATER SYSTEM - ASSEMBLE FAUCET AND INSTALL - continued B. ASSEMBLE FAUCET (FIG. 4) 1. Remove the hex nut, and all other parts shown in the dotted line box, FIG. 4. 2. Insert the faucet stud through the top gasket and faucet base.
- HOW TO INSTALL YOUR HOME DRINKING WATER SYSTEM - tighten the nut. NOTE: Cut tubing as needed for neat appearance, but keep long enough to alllow easy service of the RO system. 7. If needed, cut the 1/4" tubing (marked "1/4" BARB ON FAUCET") to length.
- HOW TO INSTALL YOUR HOME DRINKING WATER SYSTEM - MAKE REMAINING RO CONNECTIONS - continued B. CONNECT TUBING, FAUCET TO DRAIN TUB- ING CONNECTOR Looking at FIG. 7 and page 16, run the 3/8" x 27" tubing from the RO faucet, to the connector at the adapter you installed in the sink drain pipe.
- HOW TO INSTALL YOUR HOME DRINKING WATER SYSTEM - the RO system. At that time, carefully check all fit- tings and tubing connections for any water leaks. Correct leaks if any are found. E. IMPORTANT PURGING INSTRUCTIONS: The RO cartridge contains a food grade preser- vative that you should clean from it before using the system.
- HOW YOUR HOME DRINKING WATER SYSTEM WORKS - POSTFILTER - continued water. High quality drinking water flows from the postfilter and to the faucet. NOTE: Before going to the faucet, product water passes through the electronic box and remaining TDS is measured by a sensor.
- CARE OF YOUR HOME DRINKING WATER SYSTEM - PREFILTER CARTRIDGE - You must replace the prefilter cartridge often to protect the RO mem- brane from being destroyed by chlorine, and/or from plugging with sediments from the water supply. If you have chlorine in the water, replace the cartridge at least every 6 months.
- CARE OF YOUR HOME DRINKING WATER SYSTEM - RO MEMBRANE CARTRIDGE - The useful life of the membrane cartridge depends mostly on the pH (see page 17) of your supply water. The lower the pH, the longer the membrane will last. For ex- ample, if the feed water has a pH of about 7.
- CARE OF YOUR HOME DRINKING WATER SYSTEM - 7. Install the RO housing, push downward and rotate 900 clockwise to lock in place. 8. Replace the tank shutoff valve and rotate 900 to lock. 9. Using the o-ring seal, replace the vacuum relief valve. 10. DO THE SANITIZING AND PURGING PRO- CEDURES, PAGE 10.
- CARE OF YOUR HOME DRINKING WATER SYSTEM - RO CARE GUIDE MODEL RO 2000 WITH MONITOR IMPORTANT: BEFORE DOING THE FOLLOWING MAINTENANCE, BE SURETO RELIEVE PRESSURE AND ALLOW AIR TO ENTER THE TANK, STEPS 1, 2 AND 3, PAGE 12.
- DIMENSIONS / SPECIFICATIONS - • =-- 8_ 1/8,,--.-_ 21" Supply water pressure limits ...................................... 40-125 PSI Supply water temperature limits ..................................... 40-100OF Maximum total dissolved solids (TDS) .
- REPAIR PARTS - WaterWorks _ I 1 I O I I HOME DRINKING WATER SYSTEM Undersink Reverse Osmosis MODEL RO 2000 ] I 36 -----_(_ DRAIN I ADAPTER I 35 ---'-'-"_(_;J[ I"'---,_ 5 34 "'"""_ _ 33 .
- REPAIR PARTS - WaterWorks TM HOME DRINKING WATER SYSTEM Undersink Reverse Osmosis MODEL RO 2000 KEY NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 PART NUMBER 7205465 12606.
- REMOTE INSTALLATION LOCATION - INSTALLING RO ASSEMBLY, AND/OR SUPPLY SADDLE VALVE IN REMOTE LOCATION Longer lengths of tubing are available from Sears (see page 19) for installing the RO assembly, and/or water supply saddle valve away from the RO faucet.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sears WaterWorks RO 2000 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sears WaterWorks RO 2000 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sears WaterWorks RO 2000 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sears WaterWorks RO 2000 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sears WaterWorks RO 2000, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sears WaterWorks RO 2000.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sears WaterWorks RO 2000. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sears WaterWorks RO 2000 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
