Manuale d’uso / di manutenzione del prodotto SC-DXIO3 del fabbricante Samsung
Vai alla pagina of 124
ii_ ;iiiiii_i_ _ f_i i_i! (_ i!_i_i _:_ iii ii_!!i_iii_ _ _i _ _ _ _ - th possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.
3 1/2 inch DVD disc camcorder DVD-VIDEO recording with 3 I/2 inch (8cm) DVD-RW/+RWi-R/+R DL (Dual Layer) discs. 2.7" wide (16:9) LCD screen (112K pixels) The 2.7" wide (16:9) LCD screen provides excellent viewing clarity with improved resolution.
,,--m What the icons and signs in this user manual mean: /'_ Means that death or serious personal injury is a risk. WARNING /i_k Means that there is a potential risk for personal injury or material damage.
irneortant safety inst uc£c)ns I J 1. Read these instructions. 12. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water, 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
17. POWER SOURCES: The CAMCORDERshould be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply at your home, consult your appliance dealer or local power company. A CAMCORDER is intended to be operated from battery, power, or other sources, refer to the operating instructions.
irnaortant safety instruot'ons .,/ 22. POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits where it can fall into such power lines or circuits.
29. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. 30. If this power supply is used at 240V ac, a suitable plug adaptor should be used. 3!. This product is covered by one or more of the following U.
Warning! ,, This camcorder should always be connected to an AC outlet with a protective grounding connection. - Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Caution Danger of explosion if battery is incorrectly replaced.
Make a backup of important recorded data, Protect your important recorded data by copying the filesto PC. Wealso recommend you copy it from your PC to other recording media for storage. Refer to the software installation and USB connection guide. Copyright: Please note that this DVD camcorder is intended for personal use only.
or- autions when usirsa IMPORTANT NOTE • Handle the liquid crystal display (LCD) with care: The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with a sharp obiect.
• Do not use the DVD camcorder near strong radio waves or magnetism: If the DVD camcorder is used near strong radio waves or magnetism, such as near a radio transmitter or electric appliances, noise could enter video and audio that are being recorded.
INTRODUCTION TO BASIC FEATURES O6 GETTING TO KNOW YOUR DVD CAMCORDER 09 What's included with your DVD camcorder 10 Front and right view 11 Left side and bottom view 12 Rear and top view PREPARATI.
DVD CAMCORDER MODE: RECORDING/PLAYBACK 33 Recording movie images on a disc 35 Recording with ease for beginners (EASY.Q mode) 36 Capturing still images during movie image playback (SC-DX103/DX105 only.
ontents DIGITAL CAMERA MODE (SC-DX103/DX105 ONLY) 52 Inserting and ejecting a memory card 55 Recordabte time and number of images 56 Recording movie images on a memory card 57 Taking photo images 58 P.
CONNECTING TO AV DEVICES 86 Connecting to a TV 88 Dubbing images from the Camcorder to a VCR or DVD/ HDD recorder 89 Using Voice Plus CONNECTING TO A PC (SC-DXl03/DX105 ONLY) 90 System requirements 91.
This chapter introduces the basic features of your DVD camcorder. See the reference pages below for more information. 0 0 0 charging the Battery pack _page 18 Setting OSD language and the date/time ,-,pages 28-29 Selecting the storage media (DISC and CARD) (SC-DX103/DX105 only) _,page 30 You can record movie and photo images.
• Recording movie images ',*pages 33-37, 56 • Taking the photo images (SC-DX103/DX105 only) _page 57 Selecting an image to play back from the thumbnail index views _,pages 38, 58-59 Viewing p.
The function of the finalized disc depends on the disc type. Finalized r DVD'R Finalized Finalized The finalized DVD disc can be played on most DVD devices. You can play back the disc only on a DVD player that supports DVD-RW discs recorded in VR mode.
WHAT'S INCLUDED WITH YOUR DVD CAMCORDER Your new DVD camcorder comes with the following accessories. If any of these items is missing from your box, call Samsung's Customer Care Center. O The exact appearance of each item may vary by model. Battery pack (IA.
FRONT AND RIGHT VIEW CLO§.§J % ,® 1_ Lens open/close switch I_ Lens (_ Remote sensor (SC-DX105 only) @ Light (SC-DX105 only) Internal microphone I_ Grip belt hook t_ Grip belt (_ Swivel handle Disc.
LEFT AND BOTTOM VIEW @ G Display (IC31) button 1_ EASY Q button Built-in speaker @ FINALIZE button !_ BATT. (battery release) switch 1_ Storage mode switch (DISC/CARD) (SC-DX103/DX105 only) 1_ Battery.
REAR AND TOP VIEW {_ Viewfinder f_ Zoom (Wf_ lever/Volume control PHOTO button (SC-DX103/DX105 only) @ Focus adjustment knob 1_} MODE button / Mode indicator (Record (_)/Play (!-_-I) mode) I_ Recordin.
eoaration This section provides information on using this DVD camcorder; such as how to use the provided accessories, how to charge the battery, how to setup the operation mode and initial setup, REMO.
on t I INSTALLING THE BUTTON-TYPE BATTERY Installation for the internal clock (battery release) switch 1. Open the LCD screen, then slide the BATT. (battery release) switch in the arrow direction to remove the battery pack. 2. Remove the battery cover.
HOLDING THE DVD CAMCORDER Attaching the grip belt insert your right hand from the bottom of the DVD camcorder up to the base of your thumb. Put your hand in a position where you can easily operate the.
re r tion I f CHARGING THE BATTERY PACK e o There are two types of power source that can be connected to your DVD camcorder. Do not use provided power supply units with other equipment.
About battery packs • The battery pack should be recharged in an environment that is between 0°C (32°F) and 40°C (104°F). However, when it is exposed to cold temperatures (below 0°C (32°F)), its usage time becomes reduced and it may cease to function.
Charging the battery pack • Use the IA-BP80W battery pack only. + The battery pack may be charged a little at the time of purchase. 1. Slide the POWER switch downwards to turn off the power. 2. Open the LCD screen and attach the battery pack to the DVD camcorder.
Charging, recording and playback times with a fully charged battery pack (with no zoom operation, etc.) For your reference, the approximate time with a fully charged battery pack: Viewfinder Normal ' Vie r -- 50min 60min 70min 55min 65min 75min The time is only for reference.
Using the DVD camcorder with the AC power adaptor It is recommended that you use the AC power adaptor to power the DVD camcorder from a household AC outlet when you perform settings on it, finalize a disc, play back, or edit images, or use it indoors.
BASIC DVD CAMCORDER OPERATION Turning the DVD camcorder on and off You can turn the camcorder on or off by sliding the POWER switch down. Selecting the operating modes • Set the operation mode by adjusting the Storage mode switch (SC-DX103/DX105 only) and MODE button before recording or operating any functions.
on SCREEN INDICATORS @-- -O -_ ,.@ -@ @ ® ,, This OSD indicators are based on using a DVD- RW disc. ,, The above screen is an example for explanation: It is different from the actual display. • Functions marked with * will not be retained when the DVD camcorder is powered on after turning it off.
DVD camcorder (disc) play mode Movie play mode Operating status (Play!Pause) Warning indicators and messages Time code (elapsed time) Storage media (disc) Battery info (remaining battery level) Disc Format (-RW VideoiVR mode only) Quality @ Voice plus Movie No.
8} _ ® % % ®CS Digital camera (memory card) record mode Record mode Operating mode (STBY (standby) or Q(recording)) Warning indicators and messages @ Time counter (movie recording time) Remaining ti.
® % G Digital camera (memory card) play mode (Video) Video play mode Operating status (Play/Pause) Time code (elapsed time) @ Warning indicators and messages Storage media (memory card) Battery info .
on I I USING THE DISPLAY (IE]I) BUTTON Switching the information display mode You can switch between the on-screen information display modes: Slide the POWER switch downwards to turn on the power, and then press the Display (1131) button. Each press of the Display button toggles the OSD (On Screen Display) function on and off.
USING THE LCD SCREEN Adjusting the LCD screen 1. Open up the LCD screen 90 ° with your finger. 2. Rotate it to the best angle to record or play. WARNING Do not lift the DVD camcorder by holding the LCD screen. ,, Over-rotation may cause damage to the inside of the hinge that connects the LCD screen to the DVD camcorder.
INITIAL SETTING: OSD LANGUAGE & DATE AND TIME • Initial setting is available in all operating modes. _page 21 To read the menus or messages in your desired language, set the OSD language. To store the date and time during record, set the date/time.
Setting the date and time Set the date and time when using this DVD camcorder for the first time. The recording date/time is recorded on the movie/photo(SC-DX108/DX105 only)images. 1. Press the MENU button. o The menu will appear. 2. Move the Joystick right or left to select "Setting.
c moorder mode: before record nQ SELECTING THE STORAGE MEDIA (SC-DX103/DX105 only) You can record movies onto a DVD disc, and you can record both movies and photos onto a memory card. With models SC-DX103/DX105, you must select the desired storage media before starting recording or playback.
7}+ ove the grip belt so it does not interfere with inserting or ejecting the disc. • The disc cover can be opened when the device is connected to an AC power adaptor or the battery pack, even if the power is off. pickup lens Caution This product utilises a laser.
Removing a disc 1. Slide the OPEN switch in the direction of the arrow. • The disc cover will partially open. 2. Gently open the cover the rest of the way by hand. 3. Remove the disc, • While pushing down the center portion of the disc spindle, pick up the disc by the edges to remove.
DVD r mode: corcln RECORDING MOVIE IMAGES ON A DISC o Set the Storage mode switch to DISC before recording on a disc. (SC-DX103/DX105 only) _page 30 _, You can record movie images using the remote control. (SC-DX105 only) _page 13 ,, This DVD camcorder provides two Recording start/stop buttons.
DVD c rr- r ® + The recorded movie image size is 720X480. + Eject the battery pack when you have finished recording to prevent unnecessary battery power consumption. + For on-screen information display, see page 22. + For approximate recording time, see page 32.
RECORDING WITH O 1 EASE FOR BEGINNERS (EASY.Q MODE) With the EASY.Q function, most of the DVD camcorder settings are automatically adjusted, which relieves you of detailed adjustments. Slide the POWER switch downwards to turn on the power. • Set the Storage mode switch to DISC.
r{ : N DVD o rr CAPTURING STILL IMAGES DURING MOVIE IMAGE PLAYBACK(SC-DX103/DX105 only) o This function works only in the Play mode. _page 21 e If you press the PHOTO button during playback, it stops playing and saves one image of the current movie scene that is paused to the memory card.
ZOOMING Use the zoom function for close-up or wide-angle recording. This DVD oamcorder allows you to record using optical 34x power zoom and 1200x digital zoom. • Zoom lever is on the top of the camcorder. ,, You can also use zoom function by moving the Joystick (W/T) up or down.
rr : DVD PLAYING MOVIE IMAGES ® o This function works only in the Play mode. _page 21 e You can switch to the Play mode by using the MODE button. e You can find a desired movie image quickly using thumbnail index views. Use the playback-related buttons on the remote control.
Adjusting the volume • You can control the volume by using the zoom lever during playback. _, You can hear the recorded sound from the built-in speaker. The level can be adjusted anywhere between 0 and 19. I_lf you close the LCD screen while playing, you will not hear the sound from the speaker.
carncorder mode: edt na rnove L..,/ DELETING IMAGES o This function works only in the Play mode. e You can delete undesired movie images recorded on the disc. • This function works only on a DVD-RW disc(VR mode). • An image that has been deleted cannot be recovered.
DELETING A SECTION OF A MOVIE IMAGE (PARTIAL DELETE) • This function works only in the Play mode. ",page 21 o Set the Storage mode switch to DISC. (SC-DX103!DX105 only) _page 30 o A movie image can be partially deleted. 1. Press the MENU button, then move the Joystick right or left to select "Edit.
D&!D amcorder mode: e_d ting mov'e image PLAYLIST What's a Playlist? • You can create a playlist on the same disc by gathering your favorite scenes from the recorded movie images. When creating or deleting a pfaylist, the original movie image will not be erased.
Creating a playlist • This function works only in Play mode. • Set the Storage mode switch to DISC. (SC-DX103/DXl05 only) _*page 30 o You can create a playlist by gathering your favorites from the recorded movie images. • You can create only one playlist.
Arranging the order of movie images within a playlist • This function works only in Play mode. o Set the Storage mode switch to DISC. (SC-DXt03/DX105 only) _page 30 • You can arrange movie images within a playlist by moving them to the desired position.
Deleting movie images from a playlist o This function works only in Play mode. Set the Storage mode switch to DISC, (SC-DX103/DX105 only) _page 30 • You can delete undesired movie images within a playlist. 1. Move the Joystick to select the playlist(E_) tab in the thumbnail index view.
£VD camcorder mode: ed tisa mo£e 'maae Deleting a section of movie image within a playlist * This function works only in Play mode. , Set the Storage mode switch to DISC, (S©-DX103/DX105 only) _page 30 ° You can delete a section of a movie image within a playlist.
DVD a rnaorder DISC FINALIZE t mode: dlsa o O This function works only in the Record mode _page 21 To play the contents of a DVD-RW/-R/+R DL on other DVD players/recorders/drives, you must finalize the disc. When finalizing, there should be enough power in the battery.
DVD ca corder mocl : disc rnanag Playing back on a PC with a DVD drive The DVD disc can be played on a PC with a DVD-running media (DVD drive). lJ 2. o o o Turn on your PC. Insert a finalized disc into the DVD drive of the PC. o DVD playback application software starts and the disc will play.
DISC UNFINALIZE o o This function works only in the Record mode. _page 21 if a DVD-RW disc had been finalized in the VR mode or Video mode, you can unfinalize the disc for further recording. When unfinalizing, there should be enough power in the battery.
DISC FORMAT - This function works only in the Record mode, _page 21 • You can format a recorded disc for re-use. By formatting, all existing data will be deleted. • 2. 3. 4. Slide the POWER switch downwards to turn on the power. _page 21 Set the Storage mode switch to DISC.
DISC IN FORMATION o This function works only in the DVD camcorder record mode. _page 21 • It shows you disc information such as the disc name, disc type, disc format, etc. NOTICE : Make sure that you insert a disc. '-,page 30 1. Slide the POWER switch downwards to turn on the power.
DX105 INSERTING AND EJECTING A MEMORY CARD This DVD camcorder has multi card-slot for access to SD (Secure Digital) and MMC (MultiMediaCard) cards, Some cards are not compatible depending on the memory card manufacturer and memory card type. Inserting a memory card 1.
SD memory card • SD memory cards have a mechanical write-protection switch. Setting the switch prevents accidental erasure of files recorded on the card. To enable writing, move the switch up in the direction of terminals. To set write protection, move the switch down.
-DX1 I05 o Note on use • Samsung is not responsible for data loss due to misuse. • We recommend using a memory card case to avoid losing data from moving and static electricity. o After a period of use, the memory card may become warm, This is normal and is not a malfunction.
RECORDABLE TIME AND NUMBER OF IMAGES Recordable time for movie images Storage Capacity Movie image 128MB 1', 256MB Approx. 8 min Approx. 16 min Memory card 512MB I 1GB I 2GB Approx. 32 min I Approx. 64 rain I Approx. 120 min Recordable number of photo images .
1 105 RECORDING MOVIE IMAGES ON A MEMORY CARD • Set the Storage mode switch to CARD before recording on a memory card. • You can record movie images using the remote control. (SC-DXl05 only) _-page 13 • This DVD camcorder provides two Recording start/stop buttons.
TAKING PHOTO IMAGES O o 1. 2. 3. Set the Storage mode switch to CARD before recording on a memory card, You can take photo images using the remote control. _*page 13 (SC-DX105 only) Slide the POWER switch downwards to turn the DVD camcorder on. o Set the Storage mode switch to CARD, _page 30 Check the subject on the LCD screen.
d tal oam da m (3o txd o3/ k_J 05 on y) PLAYING MOVIE IMAGES o This function works only in the Play mode. _page 21 o You can switch to the Play mode by pressing the MODE button. • You can find a desired movie image quickly using thumbnail index views.
VIEWING PHOTO IMAGES e This function works only in the Play mode. _page 21 • You can play back and view photo images recorded on the memory card. 1. Slide the POWER switch downwards to turn on the power and open the LCD screen, o Set the Storage mode switch to CARD.
05 PROTECTION FROM ACCIDENTAL ERASURE o This function works only in the Play mode. _page 21 • You can protect important images from accidental erasure. • If you execute formatting, all files including protected files will be erased. 1, Slide the POWER switch downwards to turn on the power.
DELETING IMAGES • This function works only in the Play mode. o You can delete undesired movie images recorded on the memory card. • If you want to delete the protected images, you must first release the image protection. • An image that has been deleted cannot be recovered.
HANDLING MENUS O Follow the instruction below to use each of the menu items listed on this page. For example: setting the Focus Using the MENU button 1. Slide the POWER switch downwards to turn on the power. - Set the appropriate storage media. (SC-DX103/DX105 only) '-page 30 2.
MENU ITEMS • Accessible items in menu vary depending on the operating mode. • For operation details, see the corresponding page. Recording menu items .................... : '::'"': ........ : " CARD .... Pa e : Operating mode DISC _,:,i Defauftvalue .
I I Playback menu items : ' ":'"'"'", ...... : CARD::: : operating mode : DISC::: :(SC:D×i03iDXl Defauitvalue l:; ::: Page :: Video Photo : Delete Q @ O 40,61 -- Edit J Partial Delete Protect Card M, anage ....
RECORDING MENU ITEMS You can set up the menu items for recording. Scene Mode(AE) This DVD camcorder automatically sets the shutter speed and aperture according to the subject brightness for optimum recording: You can also specify one of six modes depending on conditions, recording environment or purpose of filming.
White Balance This DVD camcorder automatically adjusts the color of subject. Change the white balance setting depending on the recording conditions, Settings Auto Daylight Cloudy Fluorescent On-screen.
II Iit !I tt A subject can be shot under various types of lighting conditions indoors (natural, fluorescent, candlelight, etc.). Because the color temperature is different depending on the light source, the subject tint will differ depending on the white balance settings.
Manual exposure is recommended in situations listed below: • When shooting using reverse lighting or when the background is too bright. • When shooting on a reflective natural background such as at the beach or when skiing. • When the background is overly dark or the subiect is bright.
Digital Effect The digital effect enables you to give a creative look to your recording. Select the appropriate digital effect for the type of picture that you wish to record and the effect you wish to create. There are 10 different digital effect options.
Focus The DVD camcorder usually focuses on a subject automatically (auto focus). When the DVD camcorder is turned on, auto focus will always be set. You can also manually focus a subject depending on the recording conditions.
[_ • "Focus" function wilt alternate between manuat focus and auto focus. With auto focus, no indication wifl appear on the screen. . If you are _nexperienced in the use of DVD camcorders,.
(_ • We recommend using a tripod when recording with a slow shutter speed. • If you manually change the shutter speed value when "Scene Mode(AE)" function is selected, manual changes are applied with priority. ° The image may not seem smooth when a high speed is set.
Wind Cut You can reduce wind noise when recording sound from the built-in microphone. If "Wind Cut" is set to "On," the tow-frequency components in the sound picked up by the microphone wilt be cut off during recording: this makes it easier to hear voices and sound during playback.
me LA items q_J C. Nite You can make the subject recorded appear to be in slow motion by controlling the shutter speed, or a brighter image in dark places without a compromise in colors, Settings Off Disables the function. 1/30 Records a brighter image.
Fader "You can give your recording a professional look by using special effects such as fade in at the beginning of a sequence or fade out at the end of a sequence. Fade in (approx. 3 seconds) Settings :. : : : Contents .... .... ....... On-screen display : Off:: Disables the functionl l None On : I Fader is executed.
Digital Zoom You can select the maximum zoom level in case you want to zoom to a level greater than 34x (the default setting) during recording. Zooming more than 34x is achieved digitally, up to 1200x when combined with optical zoom, This right side of the bar shows the digitat zooming factor.
File No (SC DX103/DX105 only) • File numbers are assigned to photo images in the order they were recorded. Settings Contents Series Reset Assigns file numbers in sequence even if the memory card is replaced with another one or after formatting, or after deleting all files.
PLAYBACK MENU ITEM Card Manage (SC-DX103/DX105 only) , You can manage a memory card for recording in the digital camera mode. Settings Contents On-screen display Format Delete all files and options on the memory card including protected files. None Card Info Shows the card _qformation such as used space, free space.
Date/Time You can set the date and time to display on the LCD screen. . Before you use the "Date/Time" function, you must set the date and time.
Beep Sound You can turn the beep sound on or off. Settings:: I : Contents l ancets t'hebeep sound. On |When on, a beep will sound every time a button is presse-d_ J 1_o The beep sound is off while recording movies.
Remote (SC-DX105 only) This function allows you to enable or disable the remote control for use with the DVD camcorder. Settings : : Contents : I On-screen display ; Off D sab es the function. ' ........ l ,:- The (8) indicator aRRears when you use the remote control.
Transparency You can select the desired transparency to display the menu. "0%" -'* "20%" --' "40%" _ "60%" ° This function can be set only in the record mode. Language You can select a desired language to display the menu and messages.
pr'nt ng photo iMage (sc-Dx DX105 ony) You can print ptsoto images by inserting the DPOF setting card(memory card) to the DPOF-compatible printer or connecting the DVD camcorder to the PictBridge printer. DPOF PRINT SETTING • This function works only in the Play mode.
orintina ©hoto irnaa (so-Dx o3/tx o5 DIRECT PRINTING WITH A PICTBRIDGE o if your printer is compatible with PictBridge, photo images can be printed easily by connecting the camcorder to the printer directly with the USB cable. DPOF cannot be set while PictBridge in use.
Setting the date/time imprint option Move the Joystick right or left to select "Date/Time," then move the Joystick up or down to select the desired option. To exit, press the MENU button. To print using the DPOF setting If the printer is compatible with DPOF, you can use the DPOF setting.
connect na to AV d ic You can view the recorded movie and photo images(SC-DXl03i DX105 only) on a large screen by connecting the DVD camcorder to a TV, CONNECTING TO A "IV o To play back your recordings, the television must be NTSC compatible.
Adjust the sound volume on TV. The remote control is useful when operating the DVD camcorder while viewing an image on TV screen. (SC-DX105 only) o If only a mono audio input is available on the connected device (TV, etc.), use the audio cable with the white jack (Audio L).
DUBBING IMAGES FROM THE CAMCORDER TO A VCR OR DVD/HDD RECORDER You can dub images played back on this DVD camcorder onto other video devices, such as VCRs or DVD/HDD recorders. Use the provided AV cable to connect the DVD camcorder to another video device as shown in the following figure: 1.
USING VOICE PLUS • The Voice Plus function works only in the DVD camcorder play mode. page 38 o This function enables you to narrate over a pre-recorded disc via the DVD camcorder's microphone.
3C 1 This chapter explains how to connect the camcorder to a PC using the USB cable for various functions. Q When connecting a USB cable to a PC, refer to the software installation instructions and PC specifications below. SYSTEM REQUIREMENTS DV Media PRO Following requirements must be satisfied to use DV Media PRO.
INSTALLING DV Media PRO When you install the DV Media PRO software on your Windows computer, you can enjoy the following operations by connecting your DVD camcorder to your computer via a USB cable. - View Movie Recordings and Photos on PC: DV Driver, DirectX9.
1 on Application Installation - Quick Time 1. Click "Quick Time" on the Setup screen. • QuickTime is Apple's technology for handling movie, sound, animation, graphics, text, music, and even 360-degree virtual reality (VR) scenes. (_. Please install by using the Software CD that came with this DVD camcorder.
CONNECTING THE USB CABLE To copy the movie files and photo files to your PC, connect your DVD camcorder to the PC with a USB cable. 1. Set the "USB Connect" to "Mass Storage." _page 8! 2. Connect the DVD camcorder to the PC with a USB cable.
consect Na to a PG(8o-s×l DX105 on y) VIEWING THE CONTENTS OF STORAGE MEDIA (MEMORY CARD) O 1. 2_ 3. You can transfer or copy the files saved on the memory, card onto the PC using a USB cable. Slide the POWER switch downwards to turn on the power, then set the Storage mode switch to CARD.
Structure of folders and files on the storage media (Memory card) ,, The folder and file structure for the memory card is as follows: ,, Do not arbitrarily change or remove the folder or file name. It may not be playable. o The file naming follows DCF (Design rule for Camera File System).
SO- 1 TRANSFERRING FILES FROM ON THE MEMORY CARD THE DVD CAMCORDER TO YOUR PC You can copy the movie and photo images to your PC and play them back. 1. Execute the procedure in "Viewing the contents of storage media." _pages 94-95 ° The folders in the storage media appear.
USING THE PC CAM FUNCTION Q Q o o O Q o Q o This function works only in the DVD camcorder(disc) record mode. '-,page 21 (2) To use the PC Cam function, the DV Driver, Video Codec and DirectX 9.0 programs : must be installed in the PC. You can use this DVD camcorder as a PC camera.
MAINTENANCE Your DVD camcorder is a product of superior design and craftsmanship and should be treated with care. The suggestions below wilt help you fulfil any warranty obligations and allow you to enjoy this product for many years. o For safekeeping of the DVD camcorder, turn off the DVD camcorder.
Cleaning and handling the Disc f • Take care not to touch the recording side (the rainbow_ | colored side) of the disc with your fingers. Discs contaminated by fingerprints or foreign substances may not play properly. o Use a soft cloth to clean the disc.
[ I ] I LCD screen • Do not leave the DVD camcorder in a place where the temperature is very high for a long period of time: • To prevent damage to the LCD screen Do not push it too hard or knock it on anything. Do not place the camcorder with LCD screen on the bottom.
Disc-type description Disc Type Mode Capacity Formatting a new disc ©_page 31 Recording . _pages 33~37 Deleting _-.page 40 Rewrite Playback on other DVD players (9 (Finalize®) _page 48 Playback on o.
, a'nten ce & additional information USING YOUR DVD CAMCORDER ABROAD • Each country or region has its own electric and color systems. • Before using your DVD camcorder abroad, check the following items. • Power sources The provided AC power adaptor features automatic voltage selection in the AC range from 100 V to 240 V.
troubleshooting TROUBLESHOOTING Before contacting a Samsung authorized service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. Warning indicators and messages Overall Low Battery Cover is opened Icon Informs that.
tro bl sh g Mes_ag e ............. icon Informs that.i; .............. Recovering Data,,. Don't power off While recording, if the power is suddenly turned off, file writing is not properly done, When you turn on the power, you will see the message, "Recovering Data.
PictBridge (SC-DX103/DX105 only) Message : Informs that... .... Read Error Ink Error Paper Error Print Error There are some problems with file. There are some problems with the ink cartridge. There are some problems with the paper. There are some problems with the printer.
O If you encounter any problem using your camcorder, check the following before requesting service. If these instructions do not solve your problem, contact Samsung customer service at 1-800-SAMSUNG. Symptoms and solutions Power Symptom :: :i The power turns off automatically.
Discs Symptom : ::: : :i :: The disc cannot be removed. Disc is not recognized and the disc cover opens. Exr o Your camcorder is damp and moist inside (condensation). Or the internal temperature of your camcorder is unusually high. Turn off your camcorder and leave it for about 1 hour in a cool and dry place.
troubleshootine k_J Symptom ::; : Explanation/Solution ..... :: : The actual recording time is less than the estimated recording time. The recording stops automatically. • The estimated recording time is calculated by some references. • When you record an object that moves fast, the actual recording time may be shortened.
Adjusting the image during recording Explanation/Solution _: i : :_ ..... • Set "Focus" to "Auto." -page 70 Focus does not adjust o The recording conditions are not suitable for auto focus. automatically. Adjust the focus manually.
Connecting to a computer Symptom i The computer does not recognize your camcorder. Cannot play a movie file properly on a PC, The image or sound on your camcorder is not played on your computer properly. The playback screen is paused or distorted. o Disconnect any other USB device than the keyboard, mouse and camcorder from the computer.
Overall operations Symptom : j Exp,!anati,on/Solution :: ii: : The date and time are • Has the camcorder been left unused for a long period of time? The backup memory incorrect. ] battery(button type battery) may be discharged, Replace with a new battery.
MODEL NAME: SC-DX100/DX103/DX105 System .... Video signal Picture compression format Image device Lens Focal length Filter diameter Size/dot number LCD screen method Viewfinder Connectors NTSC MPEG-2 (Disc), MPEG-4 (Card) CCD (Charge-coupled device) 800K pixels F1,6 34x (Optical), ! 200x (Digital) Electronic zoom lens f2.
SAMSUNG LIM ITED WARRANTY SAMSUNG Electronics America lnc, (SEA), warrants that this product is free from defective material and workmanship. SEA further warrants that if product fails to operate prop.
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center Samsung Electronics America, inc. 1-800-SAMSUNG (726-7864) www,samsung.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Samsung SC-DXIO3 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Samsung SC-DXIO3 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Samsung SC-DXIO3 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Samsung SC-DXIO3 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Samsung SC-DXIO3, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Samsung SC-DXIO3.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Samsung SC-DXIO3. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Samsung SC-DXIO3 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
