Manuale d’uso / di manutenzione del prodotto 7100 del fabbricante Samsung
Vai alla pagina of 407
Ed. 00 Of ficeSer v 7100 Call Ser v er Pr og r amming Guide.
COPYRIGHT This guide is proprietary to SAMSUNG Electronics Co., Ltd. and is protected by copyright. No information contained herein may be copied, translated, transcribed or duplic ated for any commercial pur- poses or disclosed to the third p arty in any form w ithout the prior written consent of SAMSUNG Electronics Co.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications I INTRODUCTION Purpose This guide describes a programming method for the Of ficeServ 7100 system users. OfficeServ 7100 allows you to utilize a digital phone to sim ply change the system setup.
Ошибка ! Стиль не определен . II Samsung Business Communications Conventions The following types of paragraphs contain speci al information that must be carefully read and thoroughly understood.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications III Reference Guides The following guides are also provided with your OfficeServ 7100 system. OfficeServ 7100 Install ation Guide Describes the installation procedures and sp ecifications for the OfficeServ 7100 system.
Ошибка ! Стиль не определен . IV Samsung Business Communications This p age is intentionally left blank..
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications V SAFETY CONCERNS For product safety and correct operation, the following information must be given to the operator/user and shall be read before the installation and operation.
Ошибка ! Стиль не определен . VI Samsung Business Communications Warning Caution Before using the Auto Record feature Before using the Auto Record feature, ma ke sure that you are not violating any laws. Samsung is not responsible for any i llegal use of this feature.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications VII T ABLE OF CONTENTS INTRODUCTION I Purpose ........................................................................................................................ .....
Ошибка ! Стиль не определен . VIII © SAMSUNG Electronics Co., Ltd. 1.6.7 Diagnosis F unction ........................................................................................................1-27 1.6.8 Hotel Func tion ....
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications IX [209] ASSIGN ADD- ON MODUL E .............................................................................................2-54 [210] CUSTOMER ON/OF F PER TENA NT .......
Ошибка ! Стиль не определен . X © SAMSUNG Electronics Co., Ltd. [412] ASSIGN TRUNK SIGNAL ............................................................................................... 2-1 12 [414] MPD/PR S SIGN AL ............
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications XI [606] ASSIGN SPEED BLOCK ................................................................................................2-177 [607] UCD OP TIONS .......................
Ошибка ! Стиль не определен . XII © SAMSUNG Electronics Co., Ltd. [750] VM CARD REST ART ......................................................................................................2-24 6 [751] ASSIGN MAILBOX .........
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications XIII [835] MGI DSP OP TIONS ........................................................................................................2- 307 [836] H.323 GK OPTIONS ..........
Ошибка ! Стиль не определен . XIV © SAMSUNG Electronics Co., Ltd. LIST OF FIGURES Figure 1.1 24B LCD DCS Euro Ph one ..................................................................................... 1-2 Figure 1.2 DS- 5038S Phone .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 1-1 CHAPTER 1. Overview of MMC Pro- gramming In this chapter , the things to know befor e you start MMC programming, and the phone but- tons and cautions will be discussed.
CHAPTER 1. Ошибка ! Стиль не определен . 1-2 Samsung Business Communications 1.2 Digital Phones Y ou need a digital display(LCD) phone in order to car ry out programming. These include DCS Euro keysets and DS/ITP 5000 Series key sets, and some examples are described in the following sections.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 1-3 The special buttons are referred to within th e relevant MMCs. For example, button ‘A ’ is used to toggle between uppercase and lowerc ase characters when entering text on the dis- play .
CHAPTER 1. Ошибка ! Стиль не определен . 1-4 Samsung Business Communications Figure 1.3 DS/ITP-5014D/5021D Phone Microphone DS/ITP-5014D (Programmable Buttons: 14) DS-/ITP5021D (.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 1-5 Figure 1.4 DS-5014S/5007S Phone The DS/ITP-5000 series phones have 38, 21, 14 or 7 programmable buttons that can be programmed with functions.
CHAPTER 1. Ошибка ! Стиль не определен . 1-6 Samsung Business Communications Using large LCD Phones Large LCD phones(DS/ITP-501 2L) do not have programmable b uttons. Instead, they display programming functions o n the LCD to be selected via the selection buttons.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 1-7 1.4 Program List by User’s Level The MMC program can be divided into pr ogrammable one and non -programmable one. The programmable MMC is classified into 3 levels, such as technician, operator , and sta- tion level.
CHAPTER 1. Ошибка ! Стиль не определен . 1-8 Samsung Business Communications 1.4.2 Operator Level Programming A technician can do programming within the range set by the MMC [802] CUSTOMER ACCESS MMC NUMBER. Programming is allowed for any phone within the tena nt group, but it can be done for only one phone at a time.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 1-9 1.4.2.2 Station Related MMC The MMC programs related to the function of the station are as follows: T able 1.
CHAPTER 1. Ошибка ! Стиль не определен . 1-10 Samsung Business Communications 1.4.2.3 Trunk Related MMC The MMC programs related to the function of the trunk are as follows: T able 1.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 1-11 1.4.2.4 Timer and Tone Related MMC The MMC programs related to the function of the timer and tone are as follows: T able 1.
CHAPTER 1. Ошибка ! Стиль не определен . 1-12 Samsung Business Communications T able 1.6 Group Related MMC list(cont inued) MMC No.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 1-13 T able 1.7 T ables, Codes, AA, DECT and VM MMC list( continued) MMC No.
CHAPTER 1. Ошибка ! Стиль не определен . 1-14 Samsung Business Communications 1.4.3 Technician Level Programming This level is allowed to program every level of program. This level of programming can be done on every phone within the system, but it can be done for only one phone at a tim e.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 1-15 T able 1.8 T echnician Level Programming list(cont inued) MMC No. MMC Name MMC: 837 SIP OPTIONS MMC: 838 PRIV A TE I.
CHAPTER 1. Ошибка ! Стиль не определен . 1-16 Samsung Business Communications 1.5 Programming List by Name This programming list is arranged alphabetically T able 1.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 1-17 T able 1.9 Alphabetically arra nged Programming list(continued) MMC Name MMC No.
CHAPTER 1. Ошибка ! Стиль не определен . 1-18 Samsung Business Communications T able 1.9 Alphabetically arra nged Programming list(continued) MMC Name MMC No.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 1-19 T able 1.9 Alphabetically arra nged Programming list(continued) MMC Name MMC No.
CHAPTER 1. Ошибка ! Стиль не определен . 1-20 Samsung Business Communications T able 1.9 Alphabetically arra nged Programming list(continued) MMC Name MMC No.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 1-21 T able 1.9 Alphabetically arra nged Programming list(continued) MMC Name MMC No.
CHAPTER 1. Ошибка ! Стиль не определен . 1-22 Samsung Business Communications T able 1.9 Alphabetically arra nged Programming list(continued) MMC Name MMC No.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 1-23 1.6 Program List by Function This section describes MMC programs are classified by the function of the OfficeServ 7100. 1.6.1 Phone Function The MMC programs related to the function of a phone that is connected with the Of fice- Serv 7100 are as follows: T able 1.
CHAPTER 1. Ошибка ! Стиль не определен . 1-24 Samsung Business Communications 1.6.2 Networking Function The MMC programs related to the function of networking are as follows: T able 1.1 1 Networking Function Programming list MMC Program No.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 1-25 T able 1.12 V oIP Function Programming list(continued ) MMC Program No.
CHAPTER 1. Ошибка ! Стиль не определен . 1-26 Samsung Business Communications 1.6.6 Auto Attendant/Voice Mail Function The MMC programs related to the function of AA(Auto Attendant) or VM(V oice Mail) are as follows: T able 1.15 Auto A ttendant/V oice Mail Function Programming list MMC Program No.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 1-27 1.6.7 Diagnosis Function The MMC programs related to the function of diagnosing the s ystem are as follows: T able 1.16 Diagnosis Function Progra mming list MMC Program No.
.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-1 CHAPTER 2. MMC Programming This chapter describes how to use each MMC program as it was listed. 2.1 Overview of Programming Procedure The order of programming will be discussed before explaining programming method of each list.
CHAPTER 2. Ошибка ! Стиль не определен . 2-2 Samsung Business Communications 2.2 Programming Procedure This section describes a procedure of each program.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-3 A C T I O N D I S P L A Y 1) Press T ransfer button and enter 100. Display shows: [201] STN LOCK UNLOCKED 2) Dial station number .(e.g., 205) OR [205] STN LOCK U NLOCKED Press V olume button to select station and press Right Soft button to move cursor .
CHAPTER 2. Ошибка ! Стиль не определен . 2-4 Samsung Business Communications [101] CHANGE USER PASSCODE Allows the system administrator or technician to reset any phone’ s passcode to its default value of ‘1234’. This MMC cannot display sta tion passcodes; it can only reset them to de- fault.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-5 [102] CALL FORWARD Allows the system administrator to program the call forward destinations for other station users. This MMC also allows call forward to be set after the destination has been entered.
CHAPTER 2. Ошибка ! Стиль не определен . 2-6 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and enter 102.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-7 [103] SET ANSWER MODE Allows the system administrator to change the answer mode of any phone. Each phone can have its answer mode set to one of the following opti ons: No Ty p e Description 0 RING MODE The phone will ring in one of eight custom rin g p atterns.
CHAPTER 2. Ошибка ! Стиль не определен . 2-8 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 103. Display shows: [201] ANS MODE RING MODE 2) Dial phone number .(e.g., 205) OR [205] ANS MODE RING MODE Press V olume button to select phone and press Right Soft button to move cursor .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-9 [104] STATION NAME Allows the system administrator or technician to enter a name up to 1 1 characters to iden- tify an individual station. ENTERING CHARACTERS Names are written using the keypad.
CHAPTER 2. Ошибка ! Стиль не определен . 2-10 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and enter 104. Display shows: [201] STN NAME 2) Dial station number .(e.g., 205) OR [205] STN NAME _ Press V olume button to select station and press Right Soft button to move cursor .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-11 [105] STATION SPEED DIAL Allows the system administrator or technici an to assign phone numbers to a station’ s per- sonal speed dial locations. CONDITIONS Each station may have up to 50 locations(or bins) assigned to it in MMC 606(Assign Speed Block).
CHAPTER 2. Ошибка ! Стиль не определен . 2-12 Samsung Business Communications 4) Enter trunk access code(e.g., 9) followed by the number to be dialed.(e.g., 4264100) [205] SPEED DIAL 05:9-4264100_ OR Press Right Soft button to return to step 2.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-13 [106] STATION SPEED DIAL NAME Allows a name up to 1 1 characters to be ente red for each personal speed dial location. This allows speed dial numbers to be selected by na me when the directory dial feature is used.
CHAPTER 2. Ошибка ! Стиль не определен . 2-14 Samsung Business Communications [107] KEY EXTENDER Use this program to view the programmable buttons assigned to stations. In addit ion, it al- lows the system administrator to assign key extenders to some keys to make a general ac- cess feature key more specific.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-15 A C T I O N D I S P L A Y 1) Press T ransfer button and enter 107. Display shows first station: [201] EXT (MAST) 01:CALL1 Æ 2) Dial station number .
CHAPTER 2. Ошибка ! Стиль не определен . 2-16 Samsung Business Communications [108] STATION STATUS This is a READ-ONL Y MMC. Displays the following attributes of a station port.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-17 RELATED ITEMS MMC 301 ASSIGN ST A TION COS MMC 302 PICKUP GROUPS MMC 303 ASSIGN BOSS/SECRET AR Y MMC 601 ASSIGN ST A.
CHAPTER 2. Ошибка ! Стиль не определен . 2-18 Samsung Business Communications [109] DATE DISPLAY Allows the system administrator or technician to select the date and time display mode on a per-station basis or system-wide.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-19 5) Press T ransfer button to save and exit. OR Press Speaker button to save and advance to next MMC.
CHAPTER 2. Ошибка ! Стиль не определен . 2-20 Samsung Business Communications [110] STATION ON/OFF Allows the system administrator to set any of the phone features listed below .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-21 (continued) No Feature Default Description 14 NOT CONT .CID ON When OFF , the Caller ID will be displa yed for the dura- tion of the call. When ON, displays timer for duration of call(if AUT O TIMER also set on).
CHAPTER 2. Ошибка ! Стиль не определен . 2-22 Samsung Business Communications RELATED ITEMS MMC 301 ASSIGN ST A TION COS MMC 701 ASSIGN COS CONTENTS.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-23 [111] PHONE RING TONE Allows the system administrator or technician to select the ring tone heard at each phone. Eight ring tones are available. A short tone burst of the selection will be heard when the dial keypad is pressed.
CHAPTER 2. Ошибка ! Стиль не определен . 2-24 Samsung Business Communications [112] ALARM REMINDER CLOCK Allows the system administrator or technician to set or change the alarm clock/appointment reminder feature for any station.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-25 RELATED ITEMS MMC 1 16 ALARM AND MESSAGE.
CHAPTER 2. Ошибка ! Стиль не определен . 2-26 Samsung Business Communications [113] VIEW MEMO NUMBER Allows a station user the ability to view a memo left by the user . A memo can be left by en- tering it via the dial keypad using the table below .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-27 [114] PHONE VOLUME Allows the station user or system administrator to set the ring volume, off-hook ring vol- ume, handset receive volume, speaker volume, background music volume and page volum e for any or all phones.
CHAPTER 2. Ошибка ! Стиль не определен . 2-28 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and enter 1 14. Display shows: [201] STN VOLUME RING VOLUME :4 2) Dial phone number .(e.g., 205) [205] STN VOLUME R ING VOLUME :4 3) Dial volume type.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-29 [115] SET PROGRAMMED MESSAGE Allows the system administrator to set a programmed message at any or all display phones. There are 20 messages(01-20) available. The last five message can be modified by each phone user .
CHAPTER 2. Ошибка ! Стиль не определен . 2-30 Samsung Business Communications [116] ALARM AND MESSAGE Allows the system administrator or technician to set or change the alarm clock/appointment reminder feature for any station.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-31 5) Dial valid entry from above list for alarm type. (e.g., 2) [205] ALM REM HHMM:1300 Æ DAILY OR Press V olume button to select alarm type and press Right Soft button to move cursor .
CHAPTER 2. Ошибка ! Стиль не определен . 2-32 Samsung Business Communications [117] EDIT TEXT MESSAGE Allows the system administrator or technician to set or change text messages for any sta- tion. One station can use up to 10 text messages.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-33 [118] CONFERENCE GROUP Allows the system administrator or technician to set conference groups for any station. A station is allowed up to five conference groups, and each group can include 4 members (excluding the station itself).
CHAPTER 2. Ошибка ! Стиль не определен . 2-34 Samsung Business Communications 5) Enter conference member dial number and press Right Soft button to return to step 4. [205] GRP(1)MBR1 9-2794296 6) Press T ransfer button to save and exit.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-35 [119] CALLER ID DISPLAY Allows the technician to set the individual st ation display preference on a per-station basis. Caller ID or CLI can be selected to either s how the name, number first, or no display de- pending on the type of call.
CHAPTER 2. Ошибка ! Стиль не определен . 2-36 Samsung Business Communications [120] LARGE LCD OPTIONS Allows the system administrator to set any of the following options for lar ge LCD phones. No Option Description 0 IDLE DISPLA Y Sets whether to display ‘ CALENDAR ’ or ‘ INFORMA TION ’ on LCD when idle.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-37 4) Press V olume button to select display type and pre ss Ri g ht Soft button. [203] DS KEY DSP EXT NAME 5) Press T ransfer button to save and exit. OR Press Speaker button to save and advance to next MMC.
CHAPTER 2. Ошибка ! Стиль не определен . 2-38 Samsung Business Communications [121] PHONE LANGUAGE Allows the system administrator to assign an LCD display based on the user ’ s ow n lan- guage.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-39 RELATED ITEMS NONE.
CHAPTER 2. Ошибка ! Стиль не определен . 2-40 Samsung Business Communications [122] NEWS DISPLAY SPEED Used to set the Smart News display speed between 0300 mS(fastest) and 1 sec(slowest). This timer is related to the Smart News PC Application Package.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-41 [125] EXECUTIVE STATE Allows the system administrator or technician to set an executive station’ s options, as fol- lows. No Option Description 0 EX EC ST A T E When working with EASYSET , t he state of the executive station can be displayed.
CHAPTER 2. Ошибка ! Стиль не определен . 2-42 Samsung Business Communications RELATED ITEMS NONE.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-43 [199] SHOW LICENSE STATUS Allows the system administrator or technician to confirm the status(V alid or Invalid) of the inserted license key .
CHAPTER 2. Ошибка ! Стиль не определен . 2-44 Samsung Business Communications [200] OPEN CUSTOMER PROGRAMMING Used to open(enable) and close(disable) cu stomer-level programming. If pr ogramming is not opened and an attempt is made to access a system MMC, the error message [NOT PERMIT] will be displayed.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-45 [201] CHANGE CUSTOMER PASSCODE Used to change the passcode allowing access to MMC 200, Open Customer Programming, from its current value. CONDITIONS y The passcode is four digits long.
CHAPTER 2. Ошибка ! Стиль не определен . 2-46 Samsung Business Communications [202] CHANGE FEATURE PASSCODE Used to change the passcodes for the following features. No F eature Description 0 RING PLAN The passcode required to place the system in different Ring Plans(RP) or change the Ring T ime Override(RTO).
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-47 4) Press T ransfer button to save and exit. OR Press Speaker button to save and advance to next MMC.
CHAPTER 2. Ошибка ! Стиль не определен . 2-48 Samsung Business Communications [203] ASSIGN UA DEVICE Assigns ringing device to be accessed when a Un iversal Answ er(UA) key is pressed or the UA pickup code is dialled. UA assign ment is made in MMC 601, Assign Station Group, for a group and then the group is entered here.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-49 [204] COMMON BELL CONTROL Determines whether the common bell relay contact s have an interrupted or continuous clo- sure when activated.
CHAPTER 2. Ошибка ! Стиль не определен . 2-50 Samsung Business Communications [205] ASSIGN LOUD BELL Designates the station that controls the loud bell ring output of a MIS card.(Each MIS card provides one loud bell port.) The loud bell w ill follow the ring cadence of the designated station.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-51 [206] BARGE-IN TYPE Sets the type of barge-in that is permitted. No Ty p e Description 0 NO BARGE-IN Barge-i n feature is unavail able regardless of a st ation’s barge-in status.
CHAPTER 2. Ошибка ! Стиль не определен . 2-52 Samsung Business Communications [207] ASSIGN VM/AA PORT Enables SLI ports to be designated as NORMAL or VM/AA. VM/AA ports receive digits and also receive a true disconnect signal on completion of a call.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-53 [208] ASSIGN RING TYPE Allows programming of single lines to have ICM ringing, T runk Line ringing and data se- cure. W ith the many ty pes of external ringing devices, all configurations can be met.
CHAPTER 2. Ошибка ! Стиль не определен . 2-54 Samsung Business Communications [209] ASSIGN ADD-ON MODULE Designates to which phone an add-on module( AOM) is assigned. There is no limit to the number of AOMs that can be assigned in the system.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-55 [210] CUSTOMER ON/OFF PER TENANT Allows the system administrator to set system features on a per-tenant basis. Each system option has a corresponding dialling number , as listed below .
CHAPTER 2. Ошибка ! Стиль не определен . 2-56 Samsung Business Communications (continued) No Option Default De scription 1 4 I C M E X T FW D O F F When ON, call for ward external is allowed when intercom calls are placed to a station that has Call For w ard External pro- grammed and set.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-57 (continued) No Option Default Description 39 SGR ALL OUT OFF When ON, the last remaining station group member can leave a group.
CHAPTER 2. Ошибка ! Стиль не определен . 2-58 Samsung Business Communications (continued) No Option Default Description 56 VOIP REALRBT OFF When ON, the system wi ll connect the real path of the outgo- ing trunk to the incoming V oIP trunk user instead of providing virtual ringback tone.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-59 DEFAULT DATA SEE DESCRIPTION SOME OPTIONS DEPEND ON COUNTR Y A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 210. Display shows: TEN. ON AND OFF D ISA PSWD :OFF 2) Dial option number .
CHAPTER 2. Ошибка ! Стиль не определен . 2-60 Samsung Business Communications [211] DOOR RING ASSIGNMENT Designates which station or group of stations will ring when a door phone button is pressed. If the ring plan destinations are not entered the default ring plan 1 is used.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-61 [214] DISA ALARM RINGING STATION Assigns the DISA alarm to ring at a specific phone. It is recommended that the person who can clear the alarm also receives the notification.
CHAPTER 2. Ошибка ! Стиль не определен . 2-62 Samsung Business Communications [217] TRAFFIC REPORT OPTION This MMC is used to print a traf fic report and select options. The traf fic report can be printed on demand, or every hour , or at a programmed time each day , or for up to three separately-timed shifts.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-63 A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 217. Display shows: TRAFFIC REPORT M ANUAL PRINTOUT 2) Dial 0 for manual or 1 for automatic print. OR TRAFFIC REPORT A UTO PRINT OPTN Press V olume button to select and press Right Soft button.
CHAPTER 2. Ошибка ! Стиль не определен . 2-64 Samsung Business Communications [219] RELAY TYPE Assigns the service type of three relay ports of misc card. Service consists of External Page, Common bell , loud bell, NOT USED. DEFAULT DATA External Page A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 219.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-65 [220] ISDN SERVICE TYPE Assigns the ISDN service type of a single line telephone port. Service consists of BC (Bearer Capability) and HLC(High Layer Capability). No Ty p e Description BC HLC 0 VOICE V oice service S peech - 1 F AX 3 G3 F AX service 3.
CHAPTER 2. Ошибка ! Стиль не определен . 2-66 Samsung Business Communications [221] EXTENSION TYPE This MMC assigns station ports for a specific use.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-67 3) Dial 0 - 5 to select station type. OR [214] PHONE USE G UEST NO SMOKING Press V olume button to select option and press Right Soft button. 4) Press T ransfer button to save and exit.
CHAPTER 2. Ошибка ! Стиль не определен . 2-68 Samsung Business Communications [222] FAX PAIR Enables a guest room to have a normal phone line and fax line simultaneously . Only a Guest No Smoking Room or Guest Smoking Room can be assigned a fax pair station which is already assigned as a fax station in MMC 221.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-69 [224] WAKE-UP ANNOUNCEMENT This MMC is an enhanced W ake Up feature. The s ystem will play a recorded message when a W ake Up call is answered by the user . The W ake Up Announcem ent feature re- quires an SVMi-20 card to be installed in the system.
CHAPTER 2. Ошибка ! Стиль не определен . 2-70 Samsung Business Communications 3) Enter the AA group num ber . OR WAKE-UP ANNOUNCE AA GROUP :5 20 Press V olume button to select and press Right Soft button to return to step 2. 4) Press T ransfer button to save and exit.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-71 [300] CUSTOMER ON/OFF PER STATION Allows the following features to be enab led/disabled on a per-station basis. No Optio n Default Description 00 ACCESS DIAL ON Determines whether a user can select a trunk or trunk group by dialling its Directory Number(DN).
CHAPTER 2. Ошибка ! Стиль не определен . 2-72 Samsung Business Communications DEFAULT DATA SEE DESCRIPTION SOME OPTIONS DEPEND ON COUNTR Y A C T I O N D I S P L A Y 1) Press T ransfer button and enter 300. Display shows: [201] CUS.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-73 [301] ASSIGN STATION COS Used to assign a class of service to each phone. There are 30 dif ferent classes of service (defined in MMC 701, Assign COS Contents) and six ring plans based on the Ring Plan T ime in MMC 507 that can apply to the COS.
CHAPTER 2. Ошибка ! Стиль не определен . 2-74 Samsung Business Communications 5) Enter the next ring plan class of service.( e.g., 05) OR [205] STN COS 1:05 2:01 3:01 Use V olume button to scroll through classes of service and press Right Soft button to move cursor to the next ring plan.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-75 [302] PICKUP GROUPS Allows the assignment of stations into call pickup groups. There is a maxim um of 20 pickup groups. An unlimited number of member s can belong to each group.
CHAPTER 2. Ошибка ! Стиль не определен . 2-76 Samsung Business Communications [303] ASSIGN BOSS/SECRETARY Assigns BOSS phones to SECRET AR Y phones. One BOSS station can have up t o and in- cluding four SECRET AR Y stations and one SECRET AR Y station can have up to and in- cluding four BOSS stations.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-77 [304] ASSIGN EXTENSION/TRUNK USE Allows you to select which stations are a llowed to make calls through C.
CHAPTER 2. Ошибка ! Стиль не определен . 2-78 Samsung Business Communications 4) Press V olume button to select YES/NO option. OR (005) USE (101) DIAL:NO ANS:Y ES Dial 1 for YES or 0 for NO and press Right Soft button to m ove cursor to ANS option.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-79 [305] ASSIGN FORCED CODE This MMC allows one of the four options to be selected: the assignment of account codes with verification, account codes without verifi cation and authorization codes(or n one of these) on a per- station basis or on an all-station basis.
CHAPTER 2. Ошибка ! Стиль не определен . 2-80 Samsung Business Communications [306] HOT LINE/OFF HOOK SELECTION Allows a station to make a predetermined call, similar to a ring-down circuit, upon the ex- piration of a timer .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-81 [308] ASSIGN BACKGROUND MUSIC SOURCE Assigns a background music source to phones. Th ere is one internal music source/external music source. The default directory numbers for the music sources are 371.
CHAPTER 2. Ошибка ! Стиль не определен . 2-82 Samsung Business Communications [309] ASSIGN STATION MOH SOURCE Assigns a Music On Hold source to phones. Th ere is one internal music source/external music source. The default directory numbers for the music sources is 371.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-83 [310] LCR CLASS OF SERVICE Assigns the LCR class of service allowed on a per-station/per -trunk basis.
CHAPTER 2. Ошибка ! Стиль не определен . 2-84 Samsung Business Communications [312] ALLOW CALLER ID Allows the system administrator or technician to allow or deny CID data to be sent from, or displayed at, LCD phones. Option Description RCV Set whether to display CID.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-85 [314] CONFIRM OUTGOING CALL Allows outgoing call restriction by call duration tim e: calls can be disconnected or the user can receive ‘confirm tone’.
CHAPTER 2. Ошибка ! Стиль не определен . 2-86 Samsung Business Communications [315] CUSTOMER SET RELOCATION Customer Set Relocation allows the system admi nistrator or technician to exchange similar stations in the system without hardware chang es.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-87 Relocate All ow ed Ta b l e SL T EURO 6B EURO 12B EURO 24B 48B AOM 64B AOM i DCS 28D i DCS 18D SL T YES NO NO NO NO .
CHAPTER 2. Ошибка ! Стиль не определен . 2-88 Samsung Business Communications Relocate All ow ed Ta b l e i DCS 8D DS- 5012L DS- 5014D DS- 5021D DS- 5007S DS- 5014S DS- 5038S IP .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-89 [316] COPY STATION USABLE Provides a tool for copying station/trunk use assignments in MMC 304 from one station user group to another . This can be done o n a station use group basis or for all station use groups.
CHAPTER 2. Ошибка ! Стиль не определен . 2-90 Samsung Business Communications [317] ASSIGN STATION/STATION USE This MMC is used to determine whether stati ons in one use group can make intercom calls to stations in other use groups.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-91 [318] DISTINCTIVE RINGING Allows the technician to select the ring tone h eard at a keyset when called by a specific sta- tion or when a specific trunk rings that keyset.
CHAPTER 2. Ошибка ! Стиль не определен . 2-92 Samsung Business Communications DEFAULT DATA T : NO (FOLLOW ST A TION SET TING) C: NO (FOLLOW ST A TION SETTING) A C T I O N D I S P L A Y 1) Press T ransfer button and enter 318. Display shows first station: [201] RING TONE T:NO C:NO PRI:NO 2) Dial trunk or station number .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-93 [319] BRANCH GROUP Assign stations to branch groups. There is a maximum of four branch groups. When a C.O. line is ringing at a station, other stations assigned the same branch group can answer the in- coming call by going of f hook.
CHAPTER 2. Ошибка ! Стиль не определен . 2-94 Samsung Business Communications [320] PRESET FORWARD NO ANSWER Allows a technician to assign a default des tination for Forward No Answer(FNA) to each station on the system. These destinations may be the same or different for each station.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-95 4) Dial call type 0, 1 or 2.(e.g., 1) OR [205] PRESET FNA 202 OPT:EXT Press V olume button to make selection and press Right Soft button to return to step 2. 5) Press T ransfer button to save and exit.
CHAPTER 2. Ошибка ! Стиль не определен . 2-96 Samsung Business Communications [323] CALLING PARTY NUMBER Allows a number up to 16 digits to be entered and associated with a station or trunk num- ber on a per PRI/BRI basis.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-97 [326] RINGBACK TONE MESSAGE Assigns Color Ring Message by using SVMi message. DEFAULT DATA NONE A C T I O N D I S P L A Y 1) Press T ransfer button and enter 326. Display shows: [301] RBT MSG NONE 2) Enter the VM station number .
CHAPTER 2. Ошибка ! Стиль не определен . 2-98 Samsung Business Communications [400] CUSTOMER ON/OFF PER TRUNK Assigns several options(listed below) on a per -trunk basis.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-99 A C T I O N D I S P L A Y 1) Press T ransfer button and enter 400. Display show: [701] TRK ON/OFF 1A2 EMULATE:OFF 2) Dial trunk number .(e.g., 704) OR [704] TRK ON/OFF 1A2 EMULATE:OFF Press V olume button to select trunk.
CHAPTER 2. Ошибка ! Стиль не определен . 2-100 Samsung Business Communications [401] TRUNK LINE/PBX LINE Used to select the mode of the trunk lines: CO LINE or PBX LINE. If PBX m ode is chosen, this allows PBX access codes to be recognized, thus allowing more complete toll restriction.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-101 [402] TRUNK DIAL TYPE Used to determine the dialling type of each trunk line.
CHAPTER 2. Ошибка ! Стиль не определен . 2-102 Samsung Business Communications [403] TRUNK TOLL CLASS Assigns to ll class level assignments on a per-tr unk or all-trunk basis in a day or night con- dition.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-103 4) Enter day toll class.(e.g., 2 for CLS-B) OR [704] TOLL CLASS 1:CLS-B 2:F-STN Press V olume button to scroll through toll classes and use Right Soft button to move the cursor .
CHAPTER 2. Ошибка ! Стиль не определен . 2-104 Samsung Business Communications [404] TRUNK NAME Allows a name up to 1 1 characters long to be entered to identify an individual trunk. ENTERING CHARACTERS Refer to ‘ENTERING CHARACTERS’ in MMC 104, ST A TION N AME.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-105 [405] TRUNK CO TEL NUMBER Allows a number up to 1 1 digits long to be entered to identify an individual trunk. ENTERING NUMBERS Numbers are written using the keypad. Each press of a key selects the digit and moves the cursor to the next position.
CHAPTER 2. Ошибка ! Стиль не определен . 2-106 Samsung Business Communications [406] TRUNK RING ASSIGNMENT Enables ringing to a specific station or to a group of stations when incoming calls are re- ceived. This MMC controls ring plan destinations for ring down trunks.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-107 [407] FORCED TRUNK RELEASE Provides a positive forced trunk release to a specific trunk or all trunks in the event of a trunk lock-up. DEFAULT DATA NONE A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 407.
CHAPTER 2. Ошибка ! Стиль не определен . 2-108 Samsung Business Communications [408] ASSIGN TR UNK MOH SOURCE Allows the system administrator to select which Music-On-Hold(MOH) source can be heard on each trunk. There is one internal m usic source/external music source (371).
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-109 [409] TRUNK STATUS READ This is a READ-ONL Y MMC. Allows the status of trunks to be read in a format that will enable the servicing personnel to quickly id entif y the ownership and position of a trunk.
CHAPTER 2. Ошибка ! Стиль не определен . 2-110 Samsung Business Communications RELATED ITEMS MMC 400 CUSTOMER ON/OFF PER TRUNK MMC 401 TRUNK LINE/PBX LINE MMC 402 TRUNK DIAL TYPE.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-111 [410] ASSIGN DISA TRUNK Allows the system to have Direct Inward System Access(DISA). Because there is a possi- bility that unauthorized calls will be made via this feature, several safeguards have been added.
CHAPTER 2. Ошибка ! Стиль не определен . 2-112 Samsung Business Communications [412] ASSIGN TRUNK SIGNAL Allows the assignment of analogue DID or E & M cards for proper signalling. Th ese trunks can also use the translation tables in MMC 714.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-113 [414] MPD/PRS SIGNAL Used on a per-trunk basis t o define if a T runk line is to be either a Metering Pulse Detec- tion(MPD) or a Polarity Reversal Signal(PRS) trunk.
CHAPTER 2. Ошибка ! Стиль не определен . 2-114 Samsung Business Communications 3) Dial 0 for PRS 1, 1 for PRS 2, 2 for PRS 3, 3 for MPD or 4 for NORMAL. [705] TRK PRS PRS 2 OR Press V olu me button to scroll through options and use Left or Right Soft button to return to step 2.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-115 [415] REPORT TRUN K ABANDON DATA Allows the system administrator or technician to enable or disable the reporting of aban- doned T runk Line calls for which CLIP information has been collected on a per -trunk basis.
CHAPTER 2. Ошибка ! Стиль не определен . 2-116 Samsung Business Communications [417] E1/PRI CRC4 OPTION This option is used to enable/disable CRC4 generation and checking. CONDITIONS y This is useful with some networks which do not support CRC4 framing but only PCM30 framing.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-117 [418] BRI AND PRI CARD RESTART This MMC is used to restart a BRI or PRI card at the card level. This action is required to update the processor on the BRI or PRI card w ith any changes in the card setup MMCs and to put these changes into effect.
CHAPTER 2. Ошибка ! Стиль не определен . 2-118 Samsung Business Communications [419] BRI OPTIONS Assigns several options on a per -BRI basis. There are dif ferent options depending on whether the BRI is programmed as a trunk or station in MMC 423.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-119 (continued) No Option Description NB P LAN Used to select the type of the Calling Party Number Plan to send to the net- wor k. UNKNOWN Unknown numbering pl an ISDN ISDN numbering plan(CCIT T E.
CHAPTER 2. Ошибка ! Стиль не определен . 2-120 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and enter 419. Display shows first BRI channel. [725] BRI-TRK CHANNEL ANY:YES 2) Dial BRI trunk number .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-121 RELATED ITEMS MMC 323 CALLING P AR TY NUMBER MMC 405 TRUNK CO TEL NUMBER MMC 418 BRI & PRI CARD REST AR T MMC 4.
CHAPTER 2. Ошибка ! Стиль не определен . 2-122 Samsung Business Communications [420] PRI OPTIONS This MMC allows the technician to program a PRI trunk card. No Option Description 0 CHANNEL ANY When this option is set to YES, the system will place calls on any free channel of that PRI if the channel chosen by the user is busy .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-123 CONDITIONS y Before setting the PRI program, the J2 jumper of the TEPRI or TEPRI2 card must be set to ‘ON’ for PRI mode. y After changing this program, run MMC 418, BRI AND PRI CARD REST AR T , to ap- ply the new setting.
CHAPTER 2. Ошибка ! Стиль не определен . 2-124 Samsung Business Communications [421] MSN DIGIT Provides a method of assigning an incoming MSN call to a specific station.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-125 5) Enter destinations for the six ring plans via the dial keypad.(e.g., 204 for ring plan 1) [704] MSN DGT (4) 1:204 2:NONE OR Press V olu me button to make selection and press Right Soft button.
CHAPTER 2. Ошибка ! Стиль не определен . 2-126 Samsung Business Communications 2) Dial trunk number .(e.g., 705) OR [705] TRK COS 1:01 2:01 3:01 Use V olu me button to scroll through trunks. Press Right Soft button to advance to step 3.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-127 [423] S/T MODE Allows the technician to select whether a BRI circuit is a station port or a trunk port. No Ty p e Description 0 TRUNK T he BRI trunk port used for ISDN trunk.
CHAPTER 2. Ошибка ! Стиль не определен . 2-128 Samsung Business Communications [424] BRI S0 MAPPING This MMC assigns an ISDN terminal number to a BRI station port. CONDITIONS This function can be used only when the BRI card or BRM is installed in the system.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-129 [425] CID TRUNKS This MMC assigns a TRUNK number to a CID TRUNK. CONDITIONS This function can be used only when the TRM or trunk card is installed in the s ystem. DEFAULT DATA NORMAL TRUNK A C T I O N D I S P L A Y 1) Press T ransfer button and enter 425.
CHAPTER 2. Ошибка ! Стиль не определен . 2-130 Samsung Business Communications [426] TRUNK GAIN CONTROL Allows loss levels to be adjusted on a per -tr unk basis. There are two adjustments available in this MMC: ‘TX’ is the transmission level adju stment of the trunk to the station.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-131 [428] ASSIGN TRUNK/TRUNK USE This MMC is used to allow or restrict tr unks from making outgoi ng calls to other trunks within the same system. By default(DIAL=YES) all trunks can use other trunks.
CHAPTER 2. Ошибка ! Стиль не определен . 2-132 Samsung Business Communications [432] SET H-TRK This MMC is used to select the type of si gnalling for each H- trunk. There are three opera- tion types available.(E & M, DID, R/D) DEFAULT DATA E & M A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 432.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-133 [433] COST RATE In this MMC, the TRUNK COST RA TE flags ar e entered for each trunk. DIAL PLANs are defined in MMC 746(Costing Dial Plan). RA TE CALCULA TION T ABLES are defined in MMC 749.
CHAPTER 2. Ошибка ! Стиль не определен . 2-134 Samsung Business Communications [434] CONNECTION STATUS This read-only MMC will confirm the connecti on status of stations or trunks. Dis play status displays the status of a station or trunk at the time requested.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-135 Display trunk status in conference 1) Press T ransfer button and enter 434.
CHAPTER 2. Ошибка ! Стиль не определен . 2-136 Samsung Business Communications Display connection status with invalid trunk or station number 1) Press T ransfer button and enter 434.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-137 [436] TRUNK TMC GAIN Allows loss levels of TMC for analogue trunks to be adjusted on a per -trunk basis. There are two adjustments available in this MMC: ‘T X’ is the transmission level adjustment of the trunk to the station.
CHAPTER 2. Ошибка ! Стиль не определен . 2-138 Samsung Business Communications [437] 16TRK GAIN CONTROL Allows gain levels to be adjusted on a per - trunk basis. There are two adjustments available in this MMC: ‘TX’ is the transmission level adju stment of the trunk to the station.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-139 [500] SYSTEM-WIDE COUNTERS Used to set the values of the system counters. The counters are listed below with a brief de- scription of each. No Counter Default Description 0 ALARM REM.
CHAPTER 2. Ошибка ! Стиль не определен . 2-140 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 500.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-141 [501] SYSTEM TIMERS Allows the technician to adjust individual timers as necessary . TIMER TABLE Timer Name Default Range Unit Description ALARM TIME 100 0-2500 MIN This is the time the system alarm key will start ringing after the alarm key has been silenc ed.
CHAPTER 2. Ошибка ! Стиль не определен . 2-142 Samsung Business Communications (continued) Timer Name Default Range Unit Description CO CONFIRM TIME 3 0-250 MIN According to MMC 314 CO CO NFIRM ty pe, the outgoing call will be disconnecte d after this timer expires or the outgoing caller w ill hear the confirm tone.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-143 (continued) Timer Name Default Range Unit Description FIRST DIGIT TIME 10 1-250 SEC This timer controls how long the system will wait for dialling to begin before drop ping the dial tone and returning the yo u to error tone.
CHAPTER 2. Ошибка ! Стиль не определен . 2-144 Samsung Business Communications (continued) Timer Name Default Range Unit Description MS LED ON TIME 5 1-10 SEC This timer controls the duration a Manu al Sig- nalling key will remain on after use.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-145 (continued) Timer Name Default Range Unit Description TRANSFER RECALL 20 0-250 SEC This timer determines ho w long transferred calls ring before recalling. This is a system- wide timer .
CHAPTER 2. Ошибка ! Стиль не определен . 2-146 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and enter 501. Display shows first timer value: AA INT DGT TIME 05 SEC Æ 2) Press V olume button to select timer and press Right Soft button to move cursor .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-147 [502] STATION-WIDE TIMERS Allows certain station timer values to be cha nged on a per -station basis or for all stations. No Item Description 0 NO ANS FWD This timer controls how lo ng the station will ring before For ward on No Answer takes place.
CHAPTER 2. Ошибка ! Стиль не определен . 2-148 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and enter 502. Display shows: [201] NO ANS FWD 015 SEC Æ 2) Dial station number .(e.g., 205) OR [205] NO ANS FWD 015 SEC Æ _ Press V olume button to select station and press Right Soft button.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-149 [503] TRUNK-WIDE TIMERS Allows certain trunk timer values to be changed on a p er -trunk basis or for all trunks. No Item Description Range 00 ANS.BAK TM ANSWER BACK TIME.
CHAPTER 2. Ошибка ! Стиль не определен . 2-150 Samsung Business Communications (continued) No Item Description Range 13 DISA ANSWR T his is a delay time to answer the DISA trunk call or to answer the trunk when TRK AUT O ANSWER is set to ON(MMC400).
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-151 5) Press T ransfer button to save and exit. OR Press Speaker button to advance to next MMC.
CHAPTER 2. Ошибка ! Стиль не определен . 2-152 Samsung Business Communications [504] PULSE MAKE/BREAK RATIO Allows the ability to change the value of pulses per second and the duration of the make/break time. This will only af fect rotary dial trunks.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-153 [505] ASSIGN DATE AND TIME Allows the system date and time to be set.
CHAPTER 2. Ошибка ! Стиль не определен . 2-154 Samsung Business Communications [506] TONE CADENCE Provides the ability to customize the tone caden ce on a system-wide basis. The system pro- vides 1 1 types of tone and three types of tone provide d from Central Office or a PBX sys- tem can be detected.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-155 (unit: milliseconds) TON E ON OFF ON OFF DND/NO MORE TONE 250 250 250 250 ERROR TONE 500 500 500 500 H O LD /C AM P.
CHAPTER 2. Ошибка ! Стиль не определен . 2-156 Samsung Business Communications [507] ASSIGN RING PLAN TIME Use this MMC to program Ring Plans time settings. Ring Plans provide six sep arate ring- ing destinations based on day of the week and time of day .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-157 Ring Plan 1 Ring Plan 1 is the default Ring Plan for each day . If no Ring Plan destination is entered, the operator group is the default des tination. DEFAULT DATA ST AR T : NONE END: NONE A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 507.
CHAPTER 2. Ошибка ! Стиль не определен . 2-158 Samsung Business Communications [508] CALL COST Set the Call Cost attributes generated by the system during a call. This information can be displayed on the phone during a call or as an SMDR record.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-159 [510] SLI RING CADENCE Provides the ability to customize the ring cad ence for single line ports on a system-wide basis.
CHAPTER 2. Ошибка ! Стиль не определен . 2-160 Samsung Business Communications 4) Press T ransfer button to save and exit. OR Press Speaker button to advance to next MMC.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-161 [511] MSG WAITING LAMP CADENCE This MMC defines the cadence(flash rate) of single line telephone message waiting lamps on phones connected to systems with an MW SLI card.
CHAPTER 2. Ошибка ! Стиль не определен . 2-162 Samsung Business Communications [512] HOLIDAY ASSIGNMENT This MMC defines up to 60 holiday dates throughout the year . The system will override the normal ring plan for these days and remain in the ring plan associated with the holiday .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-163 [513] HOTEL TIMER This MMC is where the Hotel timers for guest-rooms are set. These are system-wide timers that affect all rooms. Refer to your Hotel docum entation for more details.
CHAPTER 2. Ошибка ! Стиль не определен . 2-164 Samsung Business Communications [514] TONE SOURCE This program can assign an external tone sour ce(e.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-165 [515] DAYLIGHT ASSIGNMENT Defines up to 10 summertime periods. The system time will automatically increase by an hour at 2 a.m. on the assigned S tart date and will automatically decrease by an hour at 3 a.
CHAPTER 2. Ошибка ! Стиль не определен . 2-166 Samsung Business Communications [600] ASSIGN OPERATOR GROUP Used to assign an operator group for each ring plan. DEFAULT DATA RING PLAN 1-6: 500 A C T I O N D I S P L A Y 1) Press T ransfer button and enter 600.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-167 [601] ASSIGN STATION GROUP This MMC is used to build all station groups .
CHAPTER 2. Ошибка ! Стиль не определен . 2-168 Samsung Business Communications (continued) No Option Description 0 TYPE(contd) d) T he callers place in queue is always maintained. Additional programming for this type of UC D group is in MMC 607.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-169 (continued) No Option Description 2 OVERFLOW This is the timer value that will cause unans wered calls to a group to begin also ringing the NE XT POR T(see below) after this timer has elapsed.
CHAPTER 2. Ошибка ! Стиль не определен . 2-170 Samsung Business Communications CONDITIONS y A station can be assigned to all station gr oups. A station group can accommodate up to 32 me mbers . y T o enable off -hook ring for incom ing calls to busy members, set OFFHOOK RING in MMC 300, CUST OMER ON/OFF PER ST A TION, to ON.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-171 7) Dial next feature option and continue. OR [505] STN GROUP RING:SEQUENTIAL Press V olume button to select option and press Right Soft button. OR Press Left Soft button to return to step 2.
CHAPTER 2. Ошибка ! Стиль не определен . 2-172 Samsung Business Communications [602] STATION GROUP NAME Allows the system administrator or technician to enter a name up to 1 1 characters to iden- tify an individual station group.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-173 [603] ASSIGN TRUNK GROUP Allows the assignment of trunks to a specific trunk group or to several trunk groups. This is useful in the programming of LCR when more than one trunk is to be in several dialling plans.
CHAPTER 2. Ошибка ! Стиль не определен . 2-174 Samsung Business Communications 5) Enter valid trunk number .(e.g., 729) OR [9] TRK GROUP MEMBER 01:729 Press V olume button to make selection and press Right Soft button to return to step 2.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-175 [604] ASSIGN STATION TO PAGE ZONE Allows the technician to assign a phone to any of the five internal paging zones. Each page zone can have up to 32 members. A phone ma y be assigned to more than one zone.
CHAPTER 2. Ошибка ! Стиль не определен . 2-176 Samsung Business Communications [605] ASSIGN EXTER NAL PAGE ZONE Determines which relays will close when one of the four external page zones is accessed. DEFAULT DATA NONE A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 605.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-177 [606] ASSIGN SPEED BLOCK Provides a means of adding or deleting speed dial blocks to the system or an indi vidual phone.
CHAPTER 2. Ошибка ! Стиль не определен . 2-178 Samsung Business Communications 5) Enter valid number for bins. (e.g., 0-5 for EXT or 00-50 for SYSTEM) FREE LIST:20 EXT205:5 OR Press V olu me button to make selection. OR Press Hold button to delete bin(s).
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-179 [607] UCD OPTIONS Sets up UCD options when an AA card has b een instal led. MMC 601 m ust have already been used to define a UCD group with an overflow destination of a n AA port or group.
CHAPTER 2. Ошибка ! Стиль не определен . 2-180 Samsung Business Communications (continued) No Option Description 04 FINAL DESTINA TION This is the final destination for the caller if not answered by a UCD agent.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-181 (continued) No Option Description 09 AUTO LOG OUT This YES/NO option determi nes if a station will automatically log out of the UCD group when the RING NEXT timer expires.
CHAPTER 2. Ошибка ! Стиль не определен . 2-182 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and enter 607. Display shows: [530] UCD OPTION FIRST MSG :61 2) Press V olume button to select UCD group or dial group number .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-183 [608] ASSIGN REVIEW BLOCK Provides a means of adding or deleting CID revi ew blocks to an individual phone.
CHAPTER 2. Ошибка ! Стиль не определен . 2-184 Samsung Business Communications [609] CALL LOG BLOCK Provides a means of adding or deleting Call L og blocks for an indi vidual phone.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-185 [611] ALLOW TEXT MESSAGING This program allows stations to send text messag es to other stations if they are busy or dur- ing an OHV A. Up to 20 stations can be allowed text messaging.
CHAPTER 2. Ошибка ! Стиль не определен . 2-186 Samsung Business Communications [612] ALLOW GROUP CONFERENCE This program allows a station to use the Group Conference call feature. Up to 20 stations can be allowed this feature. Each allowed st ation can have up to five pre-programmed con- ference groups.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-187 [614] STATION/T RUNK USE GROUP This program allows you to assign stations to station use groups and trunks to trunk use groups. This i s useful if you want to r estrict calling between stations, outgoing calls through a trunk lines, or call answering.
CHAPTER 2. Ошибка ! Стиль не определен . 2-188 Samsung Business Communications [615] MGI GROUP This program assigns designated MGI ports to sp ecific services. This allows ‘grading’ of MGI card(s) for traffic conditions. The MGI por ts can be segregated into groups.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-189 A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 615. Display shows the first available option: USER: LOCAL ITP MODE:SEQUENTIAL 2) Press V olume button to select an user type.
CHAPTER 2. Ошибка ! Стиль не определен . 2-190 Samsung Business Communications [616] MGI USER This program selects which specific MGI ports will be dedicated on a per-port basis for IP station/trunk devices. If this MMC is not used, allocation of MGI ports will be controlled by MMC 615.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-191 [700] COPY COS CONTENTS This MMC allows the technician to duplicate classes of service. DEFAULT DATA NONE PROGRAM BUTTONS ‘F’ KEY Used to advance to MMC 701 A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 700.
CHAPTER 2. Ошибка ! Стиль не определен . 2-192 Samsung Business Communications [701] ASSIGN COS CONTENTS Similar to MMC 700 but does not allow a copy comm and.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-193 (continued) No Category Des cription 1 USABLE FEA TURE No COS Default Description 20 FEA TURE YES Transfer button 2.
CHAPTER 2. Ошибка ! Стиль не определен . 2-194 Samsung Business Communications (continued) No Category Description 1 USABLE FEA TURE No COS Default Description 53 REM.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-195 A C T I O N D I S P L A Y 1) Press T ransfer button and enter 701. Display shows: COS CONTENTS(01) TOLL LEVEL:A 2) Dial COS.(e.g., 06) OR COS CONTENTS(06) T OLL LEVEL:A Press V olume button to select COS number and press Right Soft button to move cursor .
CHAPTER 2. Ошибка ! Стиль не определен . 2-196 Samsung Business Communications [702] TOLL DENY TABLE Provides a way to make toll restriction(call barring) very easy and flexible. There are 500 entries allowed in the deny table and each entry index can be assigned to a class of service.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-197 5) Press T ransfer button to save and exit. OR Press Speaker button to advance to next MMC. RELATED ITEMS MMC 703 TOLL ALLOW ANCE T ABLE MMC 704 ASSIGN WILD CHARACTER [703] TOLL ALLOWANCE TABLE Provides a way to make toll restriction very easy and flexible.
CHAPTER 2. Ошибка ! Стиль не определен . 2-198 Samsung Business Communications 4) Press V olume button to move cursor along line until under toll class mark.(e.g., E). ALOW(001):BCDEFG 202 :0001 00 Enter a 1 for ‘Y es’ or 0 for ‘No’.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-199 [704] ASSIGN WILD CHARACTER Provides flexibility to toll restriction(call barring) when a specific numbering plan is de- sired. There are only three entry tables but more than one digit can be assigned per table if needed.
CHAPTER 2. Ошибка ! Стиль не определен . 2-200 Samsung Business Communications [705] ASSIGN SYSTEM SPEED DIAL Enables the assignment of system speed dialling numbers.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-201 5) If you want to save the speed dial number and name to the CID translation table.(MMC 728) SYS SPEED DIAL ADD CLI XLT ?NO Press the ANS/RLS button and dial 1 for YES.
CHAPTER 2. Ошибка ! Стиль не определен . 2-202 Samsung Business Communications 3) Enter name using dial keypad and press Right Soft button to return to step 2. SYS SPEED NAME 505:TELECOMS OR Press the F key to return to MMC 705, step 3.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-203 [707] AUTHORIZATION CODE Enables the authorization feature on a per -cl ass of service selection. There are 500 avail- able entries. Authorization codes must be 4-10 digits long.
CHAPTER 2. Ошибка ! Стиль не определен . 2-204 Samsung Business Communications [708] ACCOUNT CODE Enables the account code entry feature. There are 999 available entries. DEFAULT DATA NONE A C T I O N D I S P L A Y 1) Press T ransfer button and enter 708.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-205 [709] TOLL PASS CODE/SPE CIAL CODE TABLE This MMC provides a means to program trunk code tables as described below .
CHAPTER 2. Ошибка ! Стиль не определен . 2-206 Samsung Business Communications 4) Enter via dial keypad the desired access/feature code.(e.g., 91 1) TOLL OVERRIDE 3:911 Press Right Soft button to enter and return to step 3 and enter more entries.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-207 [710] LCR DIGIT TABLE The LCR DIGIT T ABLE contains all numerical digits for the completion of outgoing call placement. This table works in conjunction with LC R ROUTE T ABLE, LCR TIME T A- BLE and LCR MODIFY DIGITS T ABLE.
CHAPTER 2. Ошибка ! Стиль не определен . 2-208 Samsung Business Communications [711] LCR TIME TABLE This table, through the LCR ROUTES, allows calls placed at any given time of day to use the least cost trunk route that is available.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-209 [712] LCR ROUTE TABLE The LCR ROUTE T ABLE is responsible for selecting a specific trunk group in the comple- tion of an outward bound call. This table works in conjunction with LCR DIGIT T ABLE, LCR TIME T ABLE, LCR COS T ABLE and LCR MODIFIED DIGITS T ABLE.
CHAPTER 2. Ошибка ! Стиль не определен . 2-210 Samsung Business Communications 6) Dial MODIFY DIGITS index number .(e.g., 050) OR LCR ROUTE (05:2) C:4 G:801 M:050 Press V olume button to selected index number and press Right Soft button to move cursor .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-211 [713] LCR MODIFY DIGIT TABLE This program is sometimes referred to as Outgoi ng Dial Rules. It enables the system to add or delete a digit string or singular digit if needed to com plete a call.
CHAPTER 2. Ошибка ! Стиль не определен . 2-212 Samsung Business Communications 5) Enter digits to be appended.(e.g., 45678) OR LCR MODIFY (005) A:_ Press Right Soft button to skip step or to store infor- mation and return to step 2.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-213 [714] DID NUMBER AND NAME TRANSLATION Assigns an incoming DID call to a specific ring plan destination. It also provides a call waiting option, if needed, so that a second inco ming DID call can be received.
CHAPTER 2. Ошибка ! Стиль не определен . 2-214 Samsung Business Communications DEFAULT DATA INDEX DIGIT MOH PRI 1-6 CW MC DC NAME 001 2*** NONE NO B N 99 0 NONE 002 3*** NONE NO B N 99 0 NONE 003 5*** NONE NO B N 99 0 NONE 004 8*** NONE NO B N 99 0 NONE A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 714.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-215 7) Enter call wait option via dial keypad. (1 for YES, 0 for NO) DID DIGIT (005) CW:N MC:99 DC:0 OR Press V olu me button to make selection and press Right Soft button to advance to next step.
CHAPTER 2. Ошибка ! Стиль не определен . 2-216 Samsung Business Communications [715] PROGRAMMED STATION MESSAGE Allows custom messages to be programmed or default messages to be changed. ENTERING CHARACTERS Refer to ENTERING CHARACTERS in MMC 104, ST A TION NAME.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-217 [716] UK LCR OPTION This MMC provides UK LCR options. No Option Description 0 NETWORK CODE This table is used to network access code when the call is routed to the secondary net work.
CHAPTER 2. Ошибка ! Стиль не определен . 2-218 Samsung Business Communications 5) Enter use option number .(0-3) OR NETWORK CODE 02:1234 USE:CCC Press V olume button to make selection and press Right Soft button to save and return to step 3.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-219 [717] UCD AGENT ID This MMC defines UCD agent ID numbers or PIN numbers. These numbers are used to log UCD agents into the UCD groups. There are 100 available entries and each entry is tied to a specific UCD group.
CHAPTER 2. Ошибка ! Стиль не определен . 2-220 Samsung Business Communications [718] MY AREA CODE This MMC defines the home area code and count ry code. This information is used for caller ID and ISDN calls in defining the ar ea code on incoming calls.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-221 [719] IDLE DISPLAY This program allows you to enter guidance data to be displayed on large LCD phones. ENTERING CHARACTERS Refer to ‘ENTERING CHARACTERS’ in MMC 104, ST A TION N AME.
CHAPTER 2. Ошибка ! Стиль не определен . 2-222 Samsung Business Communications [720] COPY KEY PROGRAMMING Provides a tool for duplicating key assignment s from one phone to another . This can be done on a per -station basis or on all stations, but not o n a group of stations.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-223 [721] SAVE STATION KEY PROGRAMMING Provides a service tool which minimizes the accidental loss of programmable buttons on phones.
CHAPTER 2. Ошибка ! Стиль не определен . 2-224 Samsung Business Communications [722] STATION K EY PROGRAMMING Allows the customizing of programmable buttons on specific phones and add-on modules (AOMs). For phones, buttons 1 and 2 are set as CALL buttons b y default.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-225 (continued) Feature Des cription Feature De scription CA D CALL ACTIVITY DISPLA Y OHV A OFF-HOOK VOICE ANNOUNCE CAL.
CHAPTER 2. Ошибка ! Стиль не определен . 2-226 Samsung Business Communications (continued) Feature Des cription Feature Description DT DTS KEY ST A TE SET EXECUTIVE ST A T E ECT .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-227 DEFAULT DATA For phones, buttons 1 and 2 are set as CALL bu ttons by default.(Other settings depend on the keyset type.) For AOMs, all buttons are set as DSS buttons by default.
CHAPTER 2. Ошибка ! Стиль не определен . 2-228 Samsung Business Communications [723] SYSTEM K EY PROGRAMMING This MMC is similar to MMC 722, S tation Key Programming, except that changes are made system-wide rather than on a per-station basis.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-229 DEFAULT DATA SEE DEF AUL T DA T A IN MMC 722 A C T I O N D I S P L A Y 1) Press T ransfer button and enter 723. Display shows: TYPE:24 BTN SETS 01:CALL1 Æ 2) Enter type of set via dial keypad.
CHAPTER 2. Ошибка ! Стиль не определен . 2-230 Samsung Business Communications [724] DIAL NUMBERING PLAN This MMC allows the technician to change di rectory numbers for stations, trunks, station groups, trunk groups and feature access codes.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-231 (continued) No T y pe of Dial No Description 10 VIRT EXT DIAL NO This is w here virtual station directory numbers are changed or assigned. Default: SL T : 3501- 3508, DGP: 3401-3416 1 1 MGI DIAL NO.
CHAPTER 2. Ошибка ! Стиль не определен . 2-232 Samsung Business Communications Feature Code Assignments and Default Feature Default Description ABAND 64 ABANDONED CALL ABS NONE A.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-233 (continued) Feature Default Description GRPK 66 GROUP PICKUP HDSET NONE HEADSET MODE HLDPK 12 HOLD PICKUP HOLD 1 1 .
CHAPTER 2. Ошибка ! Стиль не определен . 2-234 Samsung Business Communications (continued) Feature Default Description SETMG 41 SET MESSAGE W/O RING SLOCA T NONE ST AFF LOCA TOR(.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-235 A C T I O N D I S P L A Y 1) Press T ransfer button and enter 724.
CHAPTER 2. Ошибка ! Стиль не определен . 2-236 Samsung Business Communications [725] SMDR OPTIONS Allows the system administrator to select th e information printed on the SMDR report.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-237 (continued) No Option Default Description 15 INCOMING ANSWER NO If this option is set to YES, the duration of calls ringing before being answered w ill print on SMDR.
CHAPTER 2. Ошибка ! Стиль не определен . 2-238 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and enter 725.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-239 [727] SYSTEM VERSION DISPLAY This MMC is used for system version display only .(READ ONL Y) The displays depend on which modules are included in the system DEFAULT DATA NONE A C T I O N D I S P L A Y 1) Press T ransfer button and enter 727.
CHAPTER 2. Ошибка ! Стиль не определен . 2-240 Samsung Business Communications [728] CID TRANSLATION TABLE Allows the system administrator or technici an to associate a CID number received from the central office with a name programmed in this translation table.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-241 [740] STATION PAIR Assigns a secondary station to a phone. This secondary station can be a keyset or single line phone. The secondary station assumes the Call Forwarding, Class of Service, LCR Class, and DND attributes of the primary sta tion.
CHAPTER 2. Ошибка ! Стиль не определен . 2-242 Samsung Business Communications [746] COSTING DIAL PLAN The COSTING DIAL PLAN is used to analyze the leading dialled digits of a dialled num- ber and determine what DIAL PLAN it is to follow .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-243 DEFAULT DATA NONE A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 746.
CHAPTER 2. Ошибка ! Стиль не определен . 2-244 Samsung Business Communications [747] RATE CALCULATION TABLE The RA TE CALCULA TION T ABLE is used to define the billing charges for each COST RA TE. These rate tables correlate with the T r unk Cost Rate and the Costing Dial Plan.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-245 3) Dial option number 0-4.(e.g., 1) OR COST RATE (3) 1ST COST:000 Press V olume button to select option and press Right Soft button to move cursor . 4) Enter data via dial keypad.
CHAPTER 2. Ошибка ! Стиль не определен . 2-246 Samsung Business Communications [750] VM CARD RESTART This MMC is used for the Samsung Built-In V oice Mail card.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-247 A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 750. Display shows: M BX DOWNLOAD NO 2) Press V olume button to make selection and press Right Soft button.
CHAPTER 2. Ошибка ! Стиль не определен . 2-248 Samsung Business Communications [751] ASSIGN MAILBOX This MMC is only used for the Samsung Built -In V o ice Mail card.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-249 [752] AUTO RECORD This MMC is only used for the Samsung Built-In V oice Mail card. Specific stations in the phone system can be assigned to automatically record conversations.
CHAPTER 2. Ошибка ! Стиль не определен . 2-250 Samsung Business Communications 4) Dial VM number via dial keypad. OR AUTO RECORD PORT:2 09 CALL:I Press V olume button to make selection and press Right Soft button to move cursor .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-251 [753] WARNING DESTINATION This MMC is only used for the Samsung Built-In V o ice Mail card. It provides an em er- gency destination for calls destined for the card if the card is removed or is offline.
CHAPTER 2. Ошибка ! Стиль не определен . 2-252 Samsung Business Communications [754] VM HALT This MMC is only used for the Samsung Built-In V oice Mail. It is used to halt the V oice Mail Module. If the V oice Mail module is halted by using this MMC, system has to restart to use the V oice Mail m odule again.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-253 [755] VM ALARM This MMC is only used for the Samsung Built-In V oice Mail. It will generate an alarm message in the mailbox defined in MMC 751 when ever the V oice Mail disk drive reaches a threshold.
CHAPTER 2. Ошибка ! Стиль не определен . 2-254 Samsung Business Communications [756] ASSIGN VMMOH This MMC is only used for the Samsung Built-In V oice Mail. It is used to assign each port a Music-On-Hold source for the system from a sound file located on the V oice Mail card hard disk drive.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-255 [757] VM IN/OUT This MMC is only used for the Samsung Built -In V o ice Mail. It is used to assign each V oice Mail port as used for incoming, outgoing or both-way calls.
CHAPTER 2. Ошибка ! Стиль не определен . 2-256 Samsung Business Communications [758] VM DAY/NIGHT This MMC is only used for the Samsung Built-In V oice Mail.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-257 [759] CLI RINGING This MMC assigns a specific CID number received from the central office to a specific ring plan destination. Also allows you to reject a specific CID number and assign priorities.
CHAPTER 2. Ошибка ! Стиль не определен . 2-258 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and enter 759. Display shows: CLI RINGING(001) CLI: 2) Dial entry number .(e.g., 005) OR CLI RINGING(005) CLI:_ Press V olume button to make a selection and press Right Soft button to move cursor .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-259 [760] ITEM COST TABLE This MMC provides a means to assign a code to a billable item along with a 10-character name for the item.
CHAPTER 2. Ошибка ! Стиль не определен . 2-260 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 760. Display shows: ITEM CODE (00) NAME:RM Deposit 2) Enter valid code number(e.g., 02) via dial keypad.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-261 [761] TAX RATE SETUP This MMC allows the technician to set up th e eight tax rates used in MMC 760. Each tax rate may be defined as a fixed value or as a pe rcentage of the item cost.
CHAPTER 2. Ошибка ! Стиль не определен . 2-262 Samsung Business Communications 4) Enter the tax rate or value via dial keypad. OR TAX RATE (2) TYPE:C VAL:01.25 Press V olume button to make selection. If valid entry , system advances cursor .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-263 [762] ROOM COST RATE This MMC allows the technician to set up the cost rates for a week. Each room cost rate can be assigned with a percentage of the actual room cost from Sunday to Saturday .
CHAPTER 2. Ошибка ! Стиль не определен . 2-264 Samsung Business Communications [763] SECOND LCR This MMC allows the technician to in put the Extended LCR information table. Max table index is 200. This table have transl ation and route inform ation for input digits.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-265 5) Enter OUT DIGIT maximum 16 digits, and press Right Soft button to move cursor . (001)O UT DI GIT 7500 6) Enter USE LCR NUM option number([2]). OR (001)USE LC R NUM Press V olume button to select USE LCR NUM and press Right Soft button to move cursor .
CHAPTER 2. Ошибка ! Стиль не определен . 2-266 Samsung Business Communications [800] ENABLE TECHNICIAN PROGRAM Used to open and close technician-level programming. If programming is not opened and an attempt is made to access a system MM C, an error message will be displayed.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-267 [801] CHANGE TECHNICIAN PASSCODE Used to change the passcode which allows access to MMC 800, Enable T echnician Pro- gram, from its current value. CONDITIONS The passcode is four characters long.
CHAPTER 2. Ошибка ! Стиль не определен . 2-268 Samsung Business Communications [802] CUSTOMER ACCESS MMC NUMBER Allows the System Admini strator(customer) to have acc ess to certain MMCs.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-269 [805] TX LEVEL AND GAIN Allows the system administrator to set the base level of TX volume on phones. There are eight levels that can be controlled by the V olume buttons on phones, and 10 co ntrollable levels in the system.
CHAPTER 2. Ошибка ! Стиль не определен . 2-270 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 805. Display shows: TX LEVEL CONTROL LEVEL 0 Æ 0 2) Press V olume button to make selection(0-3) and press Right Soft button to move cursor .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-271 [806] CARD PRE-INSTALL Allows the pre-programming of a card slot for a specific card type. A card inserted into a system will not be recognized by the system until it is enabled using this MMC.
CHAPTER 2. Ошибка ! Стиль не определен . 2-272 Samsung Business Communications Press V olume button to make selection and press Right Soft button. 5) Dial 1 for YES to reset card or dial 0 for NO. OR C:1–S:6 ARE YOU SURE?NO Press V olume button to make selection and press Right Soft button.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-273 6) Press T ransfer button to save and exit. OR Press Speaker button to advance to next MMC. RELATED ITEMS MMC 724 DIAL NUMBERING PLAN [807] PHONE VOLUME CONTROL Allows the system administrator to set phone volume levels.
CHAPTER 2. Ошибка ! Стиль не определен . 2-274 Samsung Business Communications DEFAULT DATA DEPENDS ON PHONE TYPE(SHOWN FOR 21D) 21D FX T ype Default T ype Default KEY TONE VOL 1 LINE VOLUME 3 SIDETONE VOL 1 SPEAKER VOLUME 14 HANDSET TX 4 NOR.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-275 [810] HALT PROCESSING Used only in the event that all data processing needs to be stopped either in a single cabinet slot or in the entire system. DEFAULT DATA PROC A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 810.
CHAPTER 2. Ошибка ! Стиль не определен . 2-276 Samsung Business Communications [811] RESET SYSTEM Provides a means of restarting the system. The system can simply be reset or it can be reset and all memory cleared to default values.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-277 [812] SET COUNTRY CODE Selects the country for correct sy stem programming and operation. When changin g the MMC [812] ‘ MMC [812] SET COUNTR Y CODE ’ should not be used from the default levels without the assistance of t he local SAMSUNG distributor .
CHAPTER 2. Ошибка ! Стиль не определен . 2-278 Samsung Business Communications [813] HOTEL OPERATION Allows the installing technician to enable the HOTEL feature. DEFAULT DATA DISABLE A C T I O N D I S P L A Y 1) Press T ransfer button and enter 813.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-279 [815] CUSTOMER DATABASE COPY This enables the on-board customer datab ase(SRAM) to be copied to the MC Data- base(MCDB) and also allows the MCDB datab ase to be copied to the SRAM.
CHAPTER 2. Ошибка ! Стиль не определен . 2-280 Samsung Business Communications 2) Press Right Soft button to move cursor . CUST DBASE:MCDB S:12/01/01 00:00 3) Press V olu me button to make selection and press Right Soft button to move cursor .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-281 [818] PROGRAM DOWNLOAD Change the system version by downloading th e new version stored on the MC card to the APP/SYS/DR V/WEB/RUT /MSP/CSP and TEPRI cards. Option Description APP T o upgrade ap plication (including MP and VM module) SYS Include all modules.
CHAPTER 2. Ошибка ! Стиль не определен . 2-282 Samsung Business Communications [819] MC FILE CONTROL Displays the size(in bytes) of various system program files on the MC card. Files included in MC card are described below: File Name Description Star t up .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-283 A C T I O N D I S P L A Y 1) Press T ransfer button and enter 819. Display shows: S tartup.ini sz:512 bytes 2) Press V olu me button to confirm program type C s10v101.
CHAPTER 2. Ошибка ! Стиль не определен . 2-284 Samsung Business Communications [820] ASSIGN SYSTEM LINK ID This MMC is used to assign the system link ID for PRI and V oIP networking. Up to 100 link IDs can be entered including SELF ID.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-285 [821] ASSIGN NETWORK TRUNK Assigns the Q-signalling PRI trunk for networki ng. I t is assigned data on a per-TEPRI card basis. DEFAULT DATA NORMAL A C T I O N D I S P L A Y 1) Press T ransfer button and enter 821.
CHAPTER 2. Ошибка ! Стиль не определен . 2-286 Samsung Business Communications [822] VIRTUAL EXTENSION TYPE Assigns the virtual extension port type.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-287 A C T I O N D I S P L A Y 1) Press T ransfer button and enter 822. Display shows: [3501]PORT TYPE SLT 2) Enter virtual extension number. OR [3501] PORT TYPE S LT Press V olume button to make selection and press Right Soft button to move cursor .
CHAPTER 2. Ошибка ! Стиль не определен . 2-288 Samsung Business Communications [823] ASSIGN NETWORK COS Assigns the class of service for networking.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-289 A C T I O N D I S P L A Y 1) Press T ransfer button and enter 823.
CHAPTER 2. Ошибка ! Стиль не определен . 2-290 Samsung Business Communications [824] NETWORK DIAL TRANSLATION Assigns the digit translation table used fo r networking. Generally , under networking condi- tions, you must dial the node ID and extension num ber to call the another node extension.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-291 7) Enter YES/NO to assign Mailbox to remote extension automatically . 01:601 Æ 60201 DISP:Y MBX:N OR Press V olu me button to select and press Right Soft button to move cursor .
CHAPTER 2. Ошибка ! Стиль не определен . 2-292 Samsung Business Communications [825] ASSIGN NETWORKING OPTIONS Assigns the options used for networking. No Option Description 0 ADD NUMBER TO NAME Assign to include the extension number in th e name field of Q-SIG standard message.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-293 A C T I O N D I S P L A Y 1) Press T ransfer button and enter 825. Display shows: A DD NUMB TO NAME YES 2) Dial the option number . OR USE REMOTE VM N O Press V olume button to select and press Right Soft button to move cursor .
CHAPTER 2. Ошибка ! Стиль не определен . 2-294 Samsung Business Communications [826] ASSIGN SYSTEM REFERENCE CLOCK The system clock may be synchronized with an external clock source from the TEPRI or BRI card, or it can use the internal clock source.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-295 [829] LAN PRINTER PARAMETERS This program sets the various parameters required for printing to a LAN-connected device. The data listed below can be printed. 01. SMDR 02.
CHAPTER 2. Ошибка ! Стиль не определен . 2-296 Samsung Business Communications DEFAULT DATA SEE DESCRIPTION A C T I O N D I S P L A Y 1) Press T ransfer button and enter 829. Display shows: [01] DATA TYPE SMDR 2) Enter type of data to be printed.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-297 [830] ETHERNET PARAMETERS This MMC provides a mean to configure the Internet Protocol(IP) addressing of the MCP card. No Parameter Des cription 00 SYST EM IP ADDR S pecifies the IP address for the MCP card.
CHAPTER 2. Ошибка ! Стиль не определен . 2-298 Samsung Business Communications ETHERNET P A RAMETERS - The first three parameters: SYST EM IP ADDR, SYSTEM GA TEWA Y , and SYS- TEM NET MASK are stored separately fr om the main system database and thus will not be defaulted when MMC81 1 ‘ CLEAR MEMORY ’ is performed.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-299 A C T I O N D I S P L A Y 1) Press T ransfer button and enter 830. Display shows the system IP address. S YSTEM IP ADDR 165.213. 97.185 2) Press V olume button to make selection and Press Right Soft button to move cursor .
CHAPTER 2. Ошибка ! Стиль не определен . 2-300 Samsung Business Communications [831] MGI PARAMETERS This MMC provides a mean to configure the Internet Protocol(IP) addressing of the MGI card(s) in the system. No Parameter Des cription 0 IP ADDRESS Specifies the IP address for the MGI card.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-301 CONDITIONS This MMC cannot be accessed unless there is an MGI card installed in the system. DEFAULT DATA IP ADDRESS: 1.1.1.1 GA TEW A Y : 1.1.1.1 SUB MASK: 255.255.255.
CHAPTER 2. Ошибка ! Стиль не определен . 2-302 Samsung Business Communications [832] VoIP ACCESS CODE Provides a means to apply the Internet Prot ocol(IP) address to the V o IP gateway . This MMC also assigns the number of channels that can be used for IP faxes.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-303 DEFAULT DATA ACCESS DGT : 00~09(digits 0~9), 10~62 NONE DGT LENGTH: 1 DEL.LENGTH: 1 INSER T DGT : NONE IP T ABLE 1: 00 IP ST AR T : NONE SER VER USE: NO A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 832.
CHAPTER 2. Ошибка ! Стиль не определен . 2-304 Samsung Business Communications [833] VoIP IP TABLE This MMC provides the IP addresses in tables pointed to by the V oIP code entry(MMC 832). There are 63 tables with up to 16 entri es each.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-305 [834] H.323 OPTIONS This MMC provides various V oIP support options. The options set in this MMC apply sys- tem wide. No Parameter Description Default 00 GA TEW A Y CALL ID Numeric identif ier for system(up to 12 digits) 1234 01 H.
CHAPTER 2. Ошибка ! Стиль не определен . 2-306 Samsung Business Communications DEFAULT DATA SEE DESCRIPTION A C T I O N D I S P L A Y 1) Press T ransfer button and enter 834. Display shows the first option. G ATEWAY CALL ID 1234 2) Enter H.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-307 [835] MGI DSP OPTIONS This MMC provides various MGI DSP options. No Parameter Description Default 00 CODEC-FRAME Selects which audio CODEC compression will be used and the transmission interval time of V oIP p ackets gen- erated by the MGI card.
CHAPTER 2. Ошибка ! Стиль не определен . 2-308 Samsung Business Communications (continued) No Parameter Description Default 13 DT MF TYPE T here are two types of DTMF transmission: INBAND, which is industry standard(H.245) type DTMF transport, and OUTBAND which is a Samsung propr ietary method.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-309 Press V olume button to make selection and press Right Soft button to move cursor . 4) Enter MGI DSP parameter . OR MGI3:CODEC-FRAME G .729A –20 MS Press V olume button to make selection and press Right Soft button to save and return to step 3.
CHAPTER 2. Ошибка ! Стиль не определен . 2-310 Samsung Business Communications [836] H.323 GK OPTIONS Provides a means to set the H.323 gatekeeper pa rameters for an optional, external industry- standard H.323 network gatekeeper , using Re gistration, Admissions and Status signalling (RAS).
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-311 No Parameter Description Default 13 GRQ SEND Select ON or OFF fo r use of Gatekeeper RAS Re- quest(GRQ) messages. OFF 14 USE MUL TI E.164 When this option is set to ENABLE, t he E.
CHAPTER 2. Ошибка ! Стиль не определен . 2-312 Samsung Business Communications [837] SIP OPTIONS This MMC permits the adjustments of opti onal Session Initiation Protocol(SIP) trunk pa- rameters. The MCP supports SIP and H.323 on a per -call-per -port basis.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-313 (continued) No Parameter Description Default 14 PROVISIONAL TIME After receiving the Provision Response, the User Agent waits for this length of time until Timeout ends.
CHAPTER 2. Ошибка ! Стиль не определен . 2-314 Samsung Business Communications (continued) No Parameter Description Default 3 8 S I P REGISTERED Display the status of registration to the SIP Server.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-315 4) Press T ransfer button to save and exit. OR Press Speaker button to advance to next MMC.
CHAPTER 2. Ошибка ! Стиль не определен . 2-316 Samsung Business Communications [839] SIP USER This MMC is used to register sip user and password. DEFAULT DATA A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 839. Display shows the first table number .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-317 [838] PRIVATE IP ADDRESSES This MMC is used to select which SYSTEM IP Address(PRIV A TE or PUBLIC) is used to connect other devices via an H.
CHAPTER 2. Ошибка ! Стиль не определен . 2-318 Samsung Business Communications [840] IP PHONE INFORMATION This MMC provides a means to register IP phones with the Of ficeServ 7100 system. Dur- ing registration, the IP and MAC addresses are also registered.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-319 (continued) No Option Description Default 1 1 JITT ER BUF Decides the minimum time to consider delay for jitter adjustment. This data uses MMC 841 ITP DSP P ARA DOWN = PHONE DA T A only .
CHAPTER 2. Ошибка ! Стиль не определен . 2-320 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 840.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-321 [841] SYSTEM IP OPTIONS This MMC provides various proprietary Sa msung V oIP and IP integ ration options.
CHAPTER 2. Ошибка ! Стиль не определен . 2-322 Samsung Business Communications (continued) No Option Description Default Sets CTI link via LAN option with the system. 0 S MD R R E PO RT : Sets YES or NO for SM DR data to CTI link via LAN.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-323 (continued) No Option Description Default 08 ITP TX GAIN/MIC Sets IP-based phone MI C gain valu e of each level. Depends on country 09 ITP RX GAIN/SPKR Sets IP-based phone SPKR gain value of each level.
CHAPTER 2. Ошибка ! Стиль не определен . 2-324 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and enter 841. Display shows the first available option. P HONE VERSION LARGE DGP: 0000 2) Enter option category number 0-13 via dial Keypad.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-325 [845] WLAN PARAMETERS This MMC modifies the WLAN parameters. The SYSTEM KEY is used internally to dis tinguish between systems when registering a terminal.
CHAPTER 2. Ошибка ! Стиль не определен . 2-326 Samsung Business Communications (continued) No Parameter Description Default 07 VERSION WLAN module version.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-327 A C T I O N D I S P L A Y 1) Press T ransfer button and enter 845. W LAN: SYSTEM ID WBS24 2) When the cursor is on WLAN, press V olume button and select WLAN, WBS, or SIP .
CHAPTER 2. Ошибка ! Стиль не определен . 2-328 Samsung Business Communications 5) Set the items below at the WBS24 menu. The se- lected WBS is as set in MMC 849(SELECT AP TYPE option) i.e. CWBS=COMBO WBS, BWBS=BASIC WBS. Register the WBS24 IP ADDRESS.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-329 Register the RE-TRANS T4. The time the User Agent Server waits after receiving the ACK message. SIP : RE-TRANS T4 005000MS Based on the RFC2543 spec ification. The range is 0-9900 ms.
CHAPTER 2. Ошибка ! Стиль не определен . 2-330 Samsung Business Communications [846] WIP INFORMATION This MMC sets up the WIP-5000M wireless terminal information. No Parameter Description Default 00 REGIST ERED Sho w s if the terminal is registered.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-331 Displays the location of the registered terminal. [3301] LOCATED DETACH Displays the PHONE TYPE of the registered termi- nal. [3301] PHONE TYPE Displays the WLI NUMBER of the registered ter- minal.
CHAPTER 2. Ошибка ! Стиль не определен . 2-332 Samsung Business Communications [848] WLAN IP/MAC LIST This MMC is used when viewing the IP list assigned to WLAN, or when creating a new IP list. This IP address is automatically assi gned to WIP-5000M during a new registration procedure.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-333 [849] WLAN CONFIGURATION This MMC is used to set the WLAN configuration. Parameter Description REGISTER V oWLAN Enable or disa ble registration of new WIP-5000M mobile phone.
CHAPTER 2. Ошибка ! Стиль не определен . 2-334 Samsung Business Communications 6 ) Enter WEP KEY values wh en the WBS WEP SER - VICE is enabled.(13 characters only) W EP KEY 7 ) Select ENAB LE to use the static WBS IP . S TATIC WBS IP DISABLE 8 ) Select ENAB LE to use the static WIP IP .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-335 [850] SYSTEM RESOURCE DISPLAY This MMC is used for system resource disp lay .(used and free resources) This is a READ- ONL Y MMC. 0. DTMFR DSP’S 1. CID DSP’S 2. R2MFC DSP’S 3.
CHAPTER 2. Ошибка ! Стиль не определен . 2-336 Samsung Business Communications [851] ALARM REPORTING This MMC is used to view , store, print or clear system alarms. T wo levels of faults are dis- played via an alarm code: major alarms and minor alarms.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-337 A C T I O N D I S P L A Y 1) Press T ransfer button and enter 851. Display shows: SYS ALARM REPORT V IEW ALARMS 2) Enter desired option. OR SYS ALARM REPORT V IEW ALARMS Press V olume button to make selection and press Right Soft button to move cursor .
CHAPTER 2. Ошибка ! Стиль не определен . 2-338 Samsung Business Communications [852] SYSTEM ALARM ASSIGNMENTS This MMC allows the assignment of system alarms to ring and display on stations that have an Alarm key assigned. The Alarm key is assigned in MMC 722(Station Key Pro- gramming).
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-339 (continued) No Code Alarm Name Definition - MJB-- LC P /T A SK Er r or LCP or T A SK Fault 08 MJB01 HD L C C o m E r r o r Communications to LCP lost or faulty . 09 MJB02 Me m o r y Al a r m 1 A RAM diagnostic check error has occurred in the MCP2.
CHAPTER 2. Ошибка ! Стиль не определен . 2-340 Samsung Business Communications (continued) No Code Alarm Name Definition - MJD-- DTRK Error ISDN or E1 ca rd Fault 33 MJD01 Sync Failure Clocking on TEPRI cards has become async hronous.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-341 (continued) No Code Alarm Name Definition - MJD-- DTRK Error ISDN or E1 ca rd Fault 50 MJD18 E1 Restart T he E1 card has restarted. Alarm Data = Cabinet, Slot(Cx-Syy) 51 MJD19 PRI Restart The PRI card has restarted.
CHAPTER 2. Ошибка ! Стиль не определен . 2-342 Samsung Business Communications (continued) No Code Alarm Name Definition MNF-- Minor Error Minor Faul t with A larm Buffer saving 64 M NF 01 C ard O ut A circuit card mounted in a universal slot has been re- moved from service o r is not re cognized by the system.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-343 (continued) No Code Alarm Name Definition 80 MNF17 PSU Alarm Rec Over-configuration of c abinet has been corrected. Alarm Data = Cabinet, Slot(Cx-Syy) 81 MNF18 SLI Fault An SLI card has been detect ed as out of service via an internal CODEC test.
CHAPTER 2. Ошибка ! Стиль не определен . 2-344 Samsung Business Communications DEFAULT DATA ALL OFF A C T I O N D I S P L A Y 1) Press T ransfer button and enter 852. Display shows: 01:MJA01 ACT:OFF POR Restart 2) Enter desired Alarm Display number .
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-345 [853] MAINTENANCE BUSY This MMC is used to place stations, trunks and common resources equipment in a mainte- nance busy condition. Thi s can be used to isol ate suspected intermittent problems.
CHAPTER 2. Ошибка ! Стиль не определен . 2-346 Samsung Business Communications A C T I O N D I S P L A Y 1) Press T ransfer button and enter 853. Display shows busy functions: MAINTENANCE BUSY TRK :NONE Æ 2) Enter busy function type(0-8) via dial keypad.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-347 [854] DIAGNOSTIC TIME Provides a means to set the Diagnostic T ime. The system diagnostics tests include memory audits, internal loopback tests on digital trunks, and DSP , AA DSP tests.
CHAPTER 2. Ошибка ! Стиль не определен . 2-348 Samsung Business Communications [856] TECH PROGRAMMING LOGS This MMC lists the date, time and entry location of the last eight times that technician- level programming was accessed.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-349 [857] VIRTUAL CABINET SET This MMC is the program that specifies the type of virtual cabinet card.
CHAPTER 2. Ошибка ! Стиль не определен . 2-350 Samsung Business Communications 3) Press V olume botton to scroll card type and Select card type by pressing Right soft botton. C4-S01:SL T D GP 4) Press T ransfer button to save and exit.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-351 [859] HARDWARE VERSION DISPLAY This MMC is used for system hardware EPLD/PCB version display . This is a READ- ONL Y MMC. No Option Description 1 MP CARD Shows the EPLD/PCB version of MCP .
CHAPTER 2. Ошибка ! Стиль не определен . 2-352 Samsung Business Communications [861] SYSTEM OPTIONS Sets a number of system options.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-353 A C T I O N D I S P L A Y 1) Press T ransfer button and e nter 861. Display shows: A UTO UPDATE TIME DISABLE 2) Enter the option number . OR AUTO UPDATE TIME D ISABLE Press V olume button to select and press Right Soft button to move cursor .
CHAPTER 2. Ошибка ! Стиль не определен . 2-354 Samsung Business Communications 3) Enter 1 or 0 to enable or disable. OR A UTO UPDATE TIME ENABLE Press V olume button to select and press Right Soft button to store. 4) Press T ransfer button to save and exit.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications 2-355 [863] NODE INFO This MMC allows 1000 systems to be connected by u spnet service.
CHAPTER 2. Ошибка ! Стиль не определен . 2-356 Samsung Business Communications [890] INITIALIZE PORT This MMC clears a call process or initializes the database for specif ic station or trunks. This will return the port to default condition.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications I ABBREVIA TION A AAA Authentication, Author ization and Accounting AC Alternating Current ACD Automatic Call Distributio.
Ошибка ! Стиль не определен . II Samsung Business Communications D DASL Digital Ada pter Subscriber Loops DID Direct Inward Dialling DECT Digit al Enhanced Cordless T elecommu ni.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications III IP Internet Protocol IPC Inter-Processor Communication IPDC Internet Protocol Device Control IPM Inter-Processor Comm.
Ошибка ! Стиль не определен . IV Samsung Business Communications O OPX Off Premises Extension P P A T Port Address T ranslation PBA Printed(circuit) Board Assembly PCB Printed Ci.
OfficeServ 7100 Call Server Programming Guid e Samsung Business Communications V SLI Single Line Interface SL T Single Line T eleph one SMDR S tation Message Detail Recording SMTP Simple Mail T ransfe.
Ошибка ! Стиль не определен . VI Samsung Business Communications W W AN Wide Area Network WBS Wireless Base S tation WIM W AN Interface Module WLI Wireless LAN I nterface X xDSL .
Of ficeSer v 7100 Call Ser ver Prog ra mming Guide ©2007 Samsung Electronics Co., Ltd. All rights reserved. Information in this giude is proprietary to SAMSUNG Electronics Co., Ltd. No information contained here may be copied, translated, tran- scribed or duplicated by any form without the prior written con- sent of SAMSUNG .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Samsung 7100 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Samsung 7100 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Samsung 7100 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Samsung 7100 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Samsung 7100, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Samsung 7100.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Samsung 7100. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Samsung 7100 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
