Manuale d’uso / di manutenzione del prodotto 320MXN-3 del fabbricante Samsung
Vai alla pagina of 158
SyncMaster 320MX-3, 320MXN-3 320MP-3, 320MPN-3 LCD Display User Manual The c olor and the appearance may differ depending on the product, and the specificatio ns are subjec t to change without prior notice to improve the performance.
Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property dam- age. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment.
Ensure that the power plug is plugged into the power outlet firmly and correctly. • Otherwise, this may result in fire. Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet.
DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIG- ARETTES AND ANY HEATING APPLIANCES NEAR THE PRODUCT. • Otherwise, this may result in fire. Keep heating appliances as far away from the power cord or the product as possible. • Otherwise, this may result in electric shock or fire.
Clean When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft cloth. Do not spray cleaner directly onto the surface of the product. • Otherwise, this may result in the discoloration and distortion of the structure and the screen surface may peel off.
Do not place this product in a location exposed to moisture, dust, smoke, water, or in a car. • Otherwise, this may result in electric shock or fire. When you drop the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service Center.
Set a resolution and frequency appropriate to the product. • Otherwise, your eyesight may be damaged. When using headphones or earphones, do not turn the volume too high. • Having the sound too loud may damage your hearing. To avoid eyestrain, do not sit too close to the product.
When replacing the battery, insert it with the right polarity (+, -). • Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid. Use only the specified standardized batteries, and do not use a new battery and a used battery at the same time.
Do not install the product in a location low enough for children to reach. • Otherwise, it may fall and result in personal injury. • Since the front part of the product is heavy, install the product on a level and stable surface. Do not put any heavy objects on the product.
Introduction Package Contents Note • After unpacking the package, make sure to check the contents of the package. • Store the packaging box in case you need to move the Product later. • If any items are missing, contact your dealer. • Contact a local dealer to purchase optional items.
Others (BP59-00138B) (Not available in all loca- tions) Sold separately Semi Stand KIT LAN Cable USB Cable (Applicable to the MXn-3 , MPN-3 model only) RGB to BNC Cable RGB to COMPONENT Ca- ble Networ.
Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu. Navigate buttons (Up-Down buttons) Moves from one menu item to another vertically or adjusts selected menu values.
Power indicator Shows PowerSaver mode by blinking green. Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods.
RGB/COMPONENT IN (PC/COMPO- NENT Connection Terminal (Input)) • Connect the [ RGB/COMPONENT IN] port on the monitor to the RGB port on the PC using the D-SUB cable. • Connect the [ RGB/COMPONENT IN] port on the monitor to the COMPONENT port on the external device using the RGB to COMPONENT cable.
DC OUT Make sure to use connecting [ DC OUT] ter- minal to the authorized TV-Tuner Box [SBB_DTC/ZA]. Otherwise, this may result in damage to the product. HDMI IN 1 • Connect the [ HDMI IN 1] terminal at the back of your LCD Display to the HDMI terminal of your digital output device us- ing a HDMI cable.
RJ 45 MDC (MDC PORT) MDC(Multiple Display Control) Program Port Connect the LAN cable to [ RJ45 MDC] on the product and LAN on the PC. To use an MDC, the MDC Program must be installed on the PC. Note Go to Multi Control and select RJ45 MDC as the MDC Connection .
Kensington Lock slot A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations.
POWER OFF Number Buttons DEL / GUIDE button + VOL - SOURCE D.MENU TOOLS Up-Down Left-Right buttons INFO The Color button and the PC/DVI/HDMI/DP selection button. TTX/MIX MTS/DUAL ENTER/PRE-CH MUTE CH/P TV MENU RETURN EXIT MagicInfo POWER Turns the product On.
SOURCE Selects a connected external input source or MagicInfo mode. Press the button to change the input signal SOURCE. Changing the SOURCE is only allowed for external devices that are connected to the LCD Display at the time. D.MENU DTV menu display Note This button can only be used in TV mode while a TV tuner box (sold separately) is connected.
broadcasting type by using the DUAL button on the remote control while watching TV. Note Enabled when a TV tuner box is connected. ENTER/PRE-CH This button is used to return to the immediately previous channel. Note Enabled when a TV tuner box is connected.
• The warranty becomes invalid if the product is installed by someone other than a profes- sional authorized by Samsung Electronics. • A Samsung Electronics service center can provide details. Tilt Angle and Rotation 1 2 1. The product can be tilted up to 15 degrees from a vertical wall.
Note A Samsung Electronics service center can provide details. 2. Embedded Mount guide <Side view> <Top view> A : min. 40 mm B : min. 70 mm C : min.
Mechanical Layout ( 320MX-3, 320MP-3) (320MX N -3, 320MPN-3) Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards.
• Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG Distributor to place an order. After your order is placed, installation profes- sionals will visit you and install the bracket. • At least 2 persons are needed in order to move the LCD Display.
Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. • This product is for installing on cement walls.
• Make sure the wall bracket is securely fixed to the wall, or the product may not stay in place after installation. 3. Tighten the 4 screws in step 2 (plastic hanger + screw B)to the rear holes of the product. 4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1).
Note You can adjust the bracket angle between -2° and 15°. Make sure to use the top center, and not the left or the right side of the product to adjust the angle. Remote Control (RS232C) Cable connections interface RS232C(9 pin) pin TxD(No.2) RxD(No.
8 Clear to Send 9 Ring Indicator • RS232C cable Connector : 9-pin D-Sub Cable : Cross (reversed) cable -P1- -P1- -P2- -P2- FEMALE Rx Tx Gnd 2 3 5 ---------> <--------- ---------- 3 2 5 Rx Tx G.
No. command type command Value range 1 Power control 0x11 0~1 2 Volume control 0x12 0~100 3 Input source control 0x14 - 4 Screen Mode control 0x18 - 5 Screen Size control 0x19 0~255 6 PIP on/off contr.
0 : Power OFF • Ack Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘A’ 0x11 Power Power : Same as above • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check.
ERR : Error code that shows what occurred error is • Input Source Control • Function Personal Computer changes input source of TV / Monitor. • Get Input Source Status Header command ID DATA Leng.
Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘A’ 0x14 Input Source Input Source : Same as above • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xA.
0xAA 0xFF 3 ‘A’ 0x18 Screen Mode Screen Mode : Same as above • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘N’ 0x18 ERR ERR : Error code that shows what occurred error is • Screen Size Control • Function Personal Computer recognizes the screen size of TV / Monitor.
Header command ID DATA Length CheckSum 0xAA 0x3C 0 • Set the PIP ON / OFF Header command ID DATA Length DATA CheckSum 0xAA 0x3C 1 PIP PIP : The PIP ON / OFF code to set for the TV or Monitor 1 : PIP.
Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘A’ 0x3D Auto Ad- justment • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘N’ 0x3D ER.
• Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘N’ 0x5C ERR ERR : Error code that shows what occurred error is • Safety Lock • Function Personal Computer turns Safety Lock function of TV / Monitor ON / OFF. Can operate regardless of whether power is ON / OFF.
Connections Connecting a Computer There are several ways to connect the computer to the monitor. Choose one from the following options. Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, [ RGB/COMPONENT IN] port on the back of your LCD Display and the 15 pin D-sub Port on the computer.
Note Select HDMI2 or HDMI1 as an input source when connected to the PC via an HDMI cable. To obtain normal picture and audio from the PC, HDMI2 or HDMI1 must be selected before PC is selected in Edit Name . To enable audio when DVI Device is selected, be sure to establish the connection using step ( ).
1. Connect an audio cable to [ AV/COMPONENT AUDIO IN (R-AUDIO-L)] on the product and the audio port on an external device such as a VCR or DVD player. 2. Connect a video cable to [ AV IN] on the product and the video output port on the external device.
Connecting Using a HDMI Cable 1. Connect an HDMI cable to [ HDMI IN 2 (MAGICINFO)] or [ HDMI IN 1] on the product and the HDMI output port on a digital device. 2. Press SOURCE on the product or remote control and select " HDMI1 / HDMI2 " Note In HDMI mode, only PCM format audio is supported.
3. Press SOURCE on the product or remote control and select " HDMI1 / HDMI2 " Connecting a DVD Player Connect a RGB to Component cable between the [ RGB/COMPONENT IN] port on the LCD Display and the P R , Y, P B jacks on the DVD player.
Connecting a DTV Set Top (Cable/Satellite) Box Connect a RGB to Component cable between the [ RGB/COMPONENT IN] port on the LCD Display and the P R , Y, P B jacks on the Set Top Box. Connect a set of audio cables between the [ AV/COMPONENT AUDIO IN (R-AUDIO-L)] on the LCD Display and the AUDIO OUT jacks on the Set Top Box.
Connecting to MAGICINFO OUT Connect the [MAGICINFO OUT] terminal and the [HDMI IN 2 (MAGICINFO)] terminal on the product using the DP to HDMI cable. Note Applicable to the MXn-3 , MPN-3 model only. Connecting a LAN Cable Connect the LAN cable between the [LAN] port on the product and the [LAN] port on your PC.
Connecting a USB devices You can connect USB devices such as a mouse or keyboard. Note Applicable to the MXn-3 , MPn-3 model only. Connections.
Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver, insert the CD- ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the oper- ating system you have.
Note This monitor driver is certified by Microsoft, and installing it will not damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft ® Windows Vista™‚ Operating System 1.
If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue". Note This monitor driver is under certifying MS logo, and this installation will not damage your system. The certified driver will be posted on Samsung Monitor homepage.
9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence.
1. Insert CD into the CD-ROM drive. 2. Click "Start" → "Control Panel", then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...
7. Click the "Browse" button then choose A:(D:Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see the following message window, then click the "Continue Anyway" button. Then click "OK" button.
10. Monitor driver installation is completed. Microsoft ® Windows ® 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose "OK" button on the "Insert disk" window.
If you can see the "Digital Signature Not Found" window, then click the "Yes" button. Then click the "Finish" button and the "Close" button. Microsoft ® Windows ® Millennium Operating System 1. Click "Start", "Setting", "Control Panel".
5. Set a Keyboard for your computer. 6. The next screen is for setting your monitor. 7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.) 8. Set a vertical frequency for your monitor. (You can enter the frequency directly.
10. If the installation is successfully completed, the quick MDC System execution icon will appear on the desktop. MDC execution icon may not appear depending on specification of computer sys- tem or monitor.
Introduction A Multiple Display Cont rol (MDC) is an application allowing v arious displays to be easily and simult aneously operated on a PC. RS-232C, a standard of serial communication, is used for the communication between a PC and a display.
Main Icons All Remote control Selection Buttons Safety Lock Refresh Port Selection Display Selection Lamp Control Info Grid Option... Control Tools Dropdow n Selectors OSD Display 1. Use the main icons to switch into each screen. 2. Allows you to enable or disable the remote control signal rece iving function of the display unit.
1. The Multiple Display Cont rol is orig inally set t o COM1. 2. If any port other than CO M1 is used, COM1 through COM4 can be selected in th e Port Selection Menu. 3. If the exact port name that is connected to the LCD Display using a se rial cable is not selected, communica tion will be unavailable.
3) Image Size 4) On Timer 5) Off Timer 2. Selects displa ys you want to adjust using t he Select button or checkboxe s. System allows controll ing some of the functions of the sele cted display. 1) Power On/Off - Turns the power of the selecte d display On/Off.
1) Source OSD - Sets whether the Source OSD will be displaye d to indic ate when th e Source is changed. 2) Not Optimum Mode OSD - Sets whether the Optimum Mode O SD wi ll be displayed to in dicate if the current mode is not supported. 3) No Signal OSD - Sets whether the No Signal OSD will be displayed to indicate when t here is no signal.
• PC Mode Info Grid shows some basic information necessary to Input Sourc e Control. 1) PC - Changes the Input Source of the se lected display to PC. 2) BNC - Changes the Input Source of the se lected display to BNC. 3) DVI - Changes the Input Source of the se lected display to DVI.
7) S-Video - Changes the Input Source of the se lected display to S- V ideo. 8) Component - Changes the Input Source of the se lected display to Component. 9) MagicInfo - The Input source of MagicInf o works only on MagicInfo model. 10) HDMI1/HDMI2 - Changes the Input Source of the selected display to HDMI.
DP may not be supported depending on the product. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. Image Size Control is available only fo r th e displays for which power status is ON. Image Size TV, AV, S-Video, Component, DV I(HDCP), HDMI1, HDMI2, DTV.
Info Grid shows some basic information necessary to Time Control. 1) Set clock - Set the current time for the sele cted display (PC Time). - To change the current time, first change the PC Time. 2) Timer - Sets up Timer1, Timer2, Timer3 and Holiday Management.
- Selects the volume when the selected monitor is turned on. 4) Source - Selects the external input source that will be displayed when th e selected monitor is turned on. 5) Holiday - Applies the Holiday Manageme nt function to the Timer. 6) Repeat - Available selec tions include Once, Ev eryDay, Mon~Fri, Mon~Sat, Sat~S un, and Manual.
Info Grid shows some basic information necessary to PIP Si ze Control. 1) PIP Size - Shows the current PIP Size of t he display in use. 2) OFF - Turns off the PIP of the selected dis play. 3) Large - Turns on the PIP of the selected displ ay and changes the size to Large.
Info Grid shows some basic information necessary to PIP Sou rce Control. 1) PIP Source - PIP Source can be controll ed with turning on the LCD Display power. 2) PC - Changes the source of the PIP o f the selected display to PC. 3) BNC - Changes the source of the PIP o f the selected display to BNC.
Basic information required to a djust the Picture is displayed in the mai n menu. Settings for the selected moni tor will be displayed if one of the connected monitors is selected, and the defau lt settings will be displayed if all monitors are selected by cl icking All and Select.
1. Click Settings of th e main icons and the Settings Control scre en appears. Basic information requ ired to adjust settings is dis played. Settings for the corresponding S ET w ill be imported and d.
Settings Audio 1. Click Settings of th e main icons and the Settings Control scre en appears. Basic information requ ired to adjust Audio is displayed i n the display window.
Info Grid shows some basic information necessary to Settings Con trol. 1) Image Lock - Available only for PC, BNC. 2) Coarse - Adjusts Coarse of the sele cted display. 3) Fine - Adjusts Fine of the sele cted display. 4) Position - Adjusts Position of the selected display.
An "Info Grid" showing seve ral basic data items appears. 1) Maintenance - Allows the Maintenan ce Control function for all input s ources. 2) Lamp Control - Automatically adju sts the backlight of the selected display at a s pecified time. The Manual Lamp Control automatic ally turns off if you adjust using the Auto Lamp Control.
1) Scroll - This function is used to remove the afterimages t hat occur when a still screen is displ ayed on the selected display for a lon g tim e. 2) Pixel Sh ift - This allows the screen to be moved fi nely at the specified time interval.
1) Video Wall - A Video Wall is a set of video screens tha t are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen. 2) Video Wall Control - Video Wall properties can be configured.
z Natural 3) Video Wall (Screen divider) - The screen can be divided into. You can select a number of s creens with a different layout when dividin g. z Select a mode from Screen divide r. z Select a disp lay from Display Se lection. z The place will be set up by pressing a nu mber in the selected mode.
3. Selected one display (ID1) and add an other display (ID3): The program, which was displaying the s ettings value of ID 1, fetches and displays the value of ID3. 4. If all sets are selec ted at the same time by clicking All and Se lect, the default value will be restored.
Introduction Unlike the previous method which us ed the serial data comm unication specifications RS-232C, an Ethernet function has been added. Connect the first display device and the PC by entering the IP address. To conn ect to another display device, use an RS-232C serial cable.
Main Icons Lamp Control Add a Device Display Selection Remote Contro l Info Grid Safety Lock Control Tools Fault Device Alert OSD Display 1. Use the main icons to switch into each screen. 2. You can add a device by entering the IP address c onfigured on the monitor.
1. Enter the IP address of the monitor to be connecte d and press the Add button to add the IP address. If you click the OK button, adding the monitor is complet ed. System 1. Click System in the ma in menu to open the system adjustment screen. Info Grid shows some basic information necessary to System.
2. Selects displays you want to adjust usin g t he Select All button or checkboxe s. S ystem allows controlling some of the functions of the selected dis play. 1) Power On/Off - Turns the power of the selecte d display On/Off. 2) Volume - Controls the volume level of the selected display.
1) Source OSD - Sets whether the Source OSD will be displaye d to indic ate when th e Source is changed. 2) Not Optimum M ode OSD - Sets whether the Optimum Mode O SD wi ll be displayed to in dicate if the current mode is not supported. 3) No Signal OSD - Sets whether the No Signal OSD will be displayed to indicate when t here is no signal.
1) Select or clear all the added devices; or refresh or delete selected devices. 2) The IP Address, ID (Ethernet or Serial), Mac Address and connection sta tus of the connected monitor is displayed. 3) It can automatically check whether DHCP IP is set and then set th e IP address.
Info Grid shows some basic information necessary to Input Sourc e Control. 1) PC - Changes the Input Source of the se lected display to PC. 2) BNC - Changes the Input Source of the se lected display to BNC. 3) DVI - Changes the Input Source of the se lected display to DVI.
Info Grid shows some basic information necessary to Image Siz e Control. 1) ( Power Statu s) - Shows the power status of the curren t display. 2) Image Size - Shows the current Image Si ze of the display in use. 3) Input - Info Grid displays only the displa ys whose Input Source is PC, BNC, DVI an d DP.
HDMI2 may not be supported depending on the pr oduct. Time 1. Click Time of the main icons and the Time Control screen appears. Info Grid shows some basic information necessary to Time Control. 1) Clock Set - Set the current time for the sele cted display (PC Time).
1) On Time - Sets the time in hours, in mi nutes and as AM/PM for turning the se lected monitor on. 2) Off Time - Sets the time in hours, in mi nutes and as AM/PM for turning the se lected monitor off. 3) Volume - Selects the volume when the selected monitor is turned on.
The Holiday Management function can be turned on or off in the Timer setup menu. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model. Time Control is available only for the di splays for which the power status is ON.
PIP Source 1. Click PIP of the main icons and the PIP control screen appea rs. Info Grid shows some basic information necessary to PIP Sou rce Control. 1) PIP Source - PIP Source can be con trolled with turning on the LCD Display powe r. 2) PC - Changes the source of the PIP of the se lected display to PC.
1. Click Settings of the main icons and the Settings Control screen appears. Basic information required to a djust the Picture is displayed in the mai n menu.
Picture PC 1. Click Settings of the main icons and the Settings Control screen appears. Basic information requ ired to adjust settings is dis played. Settings for the corresponding S ET will be import.
Setting Audio 1. Click Settings of the main icons and the Settings Control screen appears. Basic information requ ired to adjust Audio is displayed i n the display window.
Info Grid shows some basic information necessary to Settings Con trol. 1) Image Lock - Available only for PC, BNC. 2) Coarse - Adjusts Coarse of the sele cted display. 3) Fine - Adjusts Fine of the sele cted display. 4) Position - Adjusts Position of the selected display.
An "Info Grid" showing seve ral basic data items appears. 1) Maintenance - Allows the Maintenan ce Control function for all input s ources. 2) Lamp Control - Automatically adju sts the backlight of the selected display at a s pecified time. The Manual Lamp Control automatic ally turns off if you adjust using the Auto Lamp Control.
1) Scroll - This function is used to remove the afterimages t hat occur when a still screen is displ ayed on the selected display for a long time. 2) Pixel Shift - This allows the screen to be moved finely at the specified time interval.
1) Video Wall - A Video Wall is a set of video scree ns that are connected together, so that each screen shows a part of the whole picture or so that th e same picture is repeated on each screen. 2) Video Wall Control - Video Wall properties can be conf igured.
z Natural 3) Video Wall (Screen divider) - The screen can be divided into. You can select a number of s creens with a different layout when dividin g. z Select a mode from Screen divide r. z Select a disp lay from Display Se lection. z The place will be set up by pressing a nu mber in the selected mode.
2. Selected one display: Fetches and dis plays the settings value for the selected displa y. 3. Selected one display (ID1) and add another dis play (ID3): The progra m, which was displaying the settings value of ID 1, fetches and dis plays the value of ID3.
Adjusting the LCD Display Input Available Modes • PC / DVI / DisplayPort • AV • Component • HDMI • MagicInfo • TV Note To watch TV on the product, connect a TV tuner box (sold separately).
7. DisplayPort 8. MagicInfo - A network box must be connected to use MagicInfo with a MX-3,MP-3 model. 9. TV - Enabled if a TV tuner box is connected. Note The [RGB/COMPONENT IN] port is compatible with RGB (PC) and Component signals.
Note • PIP is disabled if the primary screen does not receive a signal. • A TV tuner box (sold separately) must be connected to use the TV. • PC : DVI / AV / HDMI1 / HDMI2 / DisplayPort • DVI : PC • AV : PC • HDMI : PC • DisplayPort : PC Size Changes the Size of the PIP window.
• Medium • Low • Opaque Edit Name Name the input device connected to the input jacks to make your input source selection easier. VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DV.
Source AutoSwitch When the Source AutoSwitch is On , the display video source will automatically be searched for active video. The Primary Source selection will be activated, if the current video source is not recognized. Secondary source selection will become active, if no primary video source is available.
Specify Primary Source for the automatic input source. Secondary Source Specify Secondary Source for the automatic input source. Picture [ PC / DVI / DisplayPort / MagicInfo Mode] • If connected to a PC, set Edit Name to DVI PC , and enjoy video or audio content saved on the PC.
Mode Note Not available when Dynamic Contrast is set to On . 1. Information Recommended for communicating exact information (e.g. public information). 2. Advertisement Recommended for displaying advertisements (e.g. videos or indoor or outdoor ads). 3.
Adjust the mid-range brightness (Gamma) for the picture. • Natural • Mode 1 Sets the picture brighter than Natural . • Mode 2 Sets the picture darker than Mode 1 . • Mode 3 Increases the contrast between dark and bright colors. Color Tone Note Not available when Dynamic Contrast is set to On .
Color Control Adjusts individual Red, Green, Blue Color balance. Note Not available when Dynamic Contrast is set to On . 1. Red 2. Green 3. Blue Color Temp. Color Temp. is a measure of the 'warmth' of the image Colors. Note This function is enabled when Mode is set to Custom , and Dynamic Contrast and Color Tone are Off .
Position Adjusts the screen location horizontally and vertically. Auto Adjustment The values of Fine , Coarse , Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed. Note Available in PC mode only.
2. G-Gain 3. B-Gain 4. R-Offset 5. G-Offset 6. B-Offset Size The Size can be switched. 1. 16:9 2. 4:3 PIP Picture Adjusts the PIP Screen Settings. Note • Available Modes: PIP On 1.
Adjusts the Brightness of the PIP window on the screen. 3. Sharpness Adjusts the Sharpness of the PIP window on the screen. 4. Color Adjusts the Color of the PIP window on the screen. Note Only enabled when the PIP input source is HDMI . 5. Tint Adds a natural tone to the PIP window.
Picture Reset Reset the screen settings. Picture [ AV / HDMI / TV / Component Mode] Available Modes • PC / DVI / DisplayPort • AV • Component • HDMI • MagicInfo • TV Note To watch TV on the product, connect a TV tuner box (sold separately).
2. Standard 3. Movie 4. Custom Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. Note Not available when Dynamic Contrast is set to On . Contrast Adjusts the Contrast. Brightness Adjusts the Brightness.
The Color tones can be changed. The individual Color components are also user adjustable. Note Not available when Dynamic Contrast is set to On . 1. Off 2. Cool2 3. Cool1 4. Normal 5. Warm1 6. Warm2 Note • If you set the Color Tone to Cool2 , Cool1 , Normal , Warm1 , or Warm2 , the Color Temp.
4. 4:3 - Sets the picture to 4:3 normal mode. 5. Screen Fit - Displays the input scenes as they are without any cutoff when HDMI 720p, 1080i, 1080p signals are input.
2. Low Note For Timing which can be used for both the PC and the DTV in HDMI mode, HDMI Black Level will be activated. Film Mode Film Mode calibrates unnatural picture when watching a movie (24 frames) played on a TV (30 frames). Moving subtitles may appear corrupted when this mode is enabled.
Dynamic Contrast Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast. 1. Off 2. On Note This function is disabled when PIP or Energy Saving is On . Lamp Control Adjusts the inverter lamp in order to reduce energy consumption.
Note To watch TV on the product, connect a TV tuner box (sold separately). Note Using MagicInfo • To use MagicInfo with an MXN-3 , MPN-3 model, connect the MagicInfo output on the already included network box to [HDMI IN 2 (MAGICINFO)] on the product.
Emphasizes low frequency audio. Treble Emphasizes high frequency audio. Balance Allows you to Adjusts the sound balance between the left and right speakers. Auto Volume Reduces the difference in volume control between broadcasters. 1. Off 2. On SRS TS XT SRS TS XT is a patented SRS technology that solves the problem of playing 5.
Sound Select Enable the sound of either the primary or secondary display in PIP mode. Note Available when PIP is set to On . 1. Main 2. Sub Speaker Select When you use the product with it connecting to a Home Theater, turn the internal speakers off so you can listen to sound from the Home Theater's (external) speakers.
• AV • Component • HDMI • MagicInfo • TV Note To watch TV on the product, connect a TV tuner box (sold separately). Note Using MagicInfo • To use MagicInfo with an MXN-3 , MPN-3 model, connect the MagicInfo output on the already included network box to [HDMI IN 2 (MAGICINFO)] on the product.
Current Time Setting. Sleep Timer Turns the LCD Display off automatically at certain times. 1. Off 2. 30 3. 60 4. 90 5. 120 6. 150 7. 180 Timer1 / Timer2 / Timer3 You can set the LCD display to automatically turn on or off at a specified time. Note • Only enabled when the clock is set using the Clock Set menu.
You can register holidays. • Delete Selected You can delete selected holidays. Note • Only enabled when registered holidays are selected. • More than one holiday can be selected and deleted. • Delete All You can delete all the registered holidays.
1. High 2. Medium 3. Low 4. Opaque Safety Lock Change PIN The password can be changed. The preset password for the LCD Display is "0000". Note If you forgot your password, press the remote buttons INFO + EXIT + MUTE to reset the password to "0000.
Video Wall A Video Wall is a set of video screens connected together, so that each screen shows a part of the whole picture or where the same picture is repeated on each screen. When the Video Wall is on, you can adjust the Video Wall screen setting. Note • When Video Wall is running, the Size functions are not available.
Sets how many parts the screen should be divided horizontally. Fifteen adjustment levels: 1~15. Note If Vertical is set to 15 , the maximum value for Horizontal is 6 . Vertical Sets how many parts the screen should be divided vertically. Fifteen adjustment levels: 1~15.
Note This function is not available when the power is turned off. Pixel Shift Pixel Shift To prevent after-images on the screen, you can use this function to have pixels move on the LCD in the horizontal or vertical direction. • Off • On Horizontal Sets how many pixels the screen moves horizontally.
Time Set the time interval for performing the horizontal or vertical movement, respectively. Timer Timer You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish.
Period Use this function to set the execution period for each mode set in the timer. Time Within the set period of time specify a time for execution. Bar This function prevents after-images on the screen by moving long black and white vertical lines. Eraser This function prevents after-images on the screen by moving a rectangular pattern.
Pixel This function prevents after-images by moving many pixels on the screen. Side Gray Select the brightness of the grey for the screen background. • Off • Light • Dark Resolution Select When .
4. 1360 X 768 5. 1366 X 768 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz , 1280 x 768 @ 60Hz , 1360 x 768 @ 60Hz or 1366 x 768 @ 60Hz . Power On Adjustment Adjusts the Power On time for the screen. Caution: Set the Power On time to be longer to avoid overvoltage.
Fan Controls Selects auto or manual for the fan speed settings. • Auto • Manual Fan Speed Setting Sets the fan speed within a range of 0 and 100 . Note Enabled when Fan Control is set to Manual . Temperature Control Detects the product's internal temperature and specifies the desired temperature.
Note • It is best to set Fan Control to Auto when you change the Temperature Control setting. Current Temperature Shows the current temperature of the product. Auto Power Enables or disables Auto Power for the product. • Off • On Note When Auto Power is On , the product will power on automatically as soon as it is connected to power.
User Auto Color 1. Auto Color Automatically adjusts the Colors. 2. Reset Resets the Color settings. Note Enabled only in PC mode. Standby Control Sets the standby mode, which will be activated when no input signal is detected. • Off A message will read No Signal if no input signal is detected.
Lamp Schedule Adjusts the luminance to a user-specified value at a specified time. OSD Display Displays or hides a menu item on the screen. Source OSD • Off • On Not Optimum Mode OSD • Off • O.
• Off • On MDC OSD • Off • On Software Upgrade Performs a software upgrade. 1. Connect the product to a computer via a digital signal such as DVI or HDMI . Click the BMP image file converted from an SW code. The image below will appear on the screen of the product.
Note • This only operates with a digital signal, such as in DVI , HDMI1 , or HDMI2 mode. (The input resolution must be identical to the panel resolution.) • In HDMI1 and HDMI2 modes, the timing values used for both the PC and TV are only supported if the Edit Name is set to PC or DVI PC .
• To use MagicInfo with an MXN-3 , MPN-3 model, connect the MagicInfo output on the already included network box to [HDMI IN 2 (MAGICINFO)] on the product.
• MagicInfo • TV Note To watch TV on the product, connect a TV tuner box (sold separately). Note Using MagicInfo • To use MagicInfo with an MXN-3 , MPN-3 model, connect the MagicInfo output on the already included network box to [HDMI IN 2 (MAGICINFO)] on the product.
• For drive D:, EWF is not applied. • To save Setup contents that have been changed when EWF is in the Enable state, you must Commit them. • By selecting Disable , Enable or Commit , the system is restarted. MagicInfo 1. Select Application - step 1 You can select an Application to be executed in your computer when Windows starts.
3. Select Language - step 3 When using multiple languages, you can choose and set a specific language among them. 4. Select Screen Type - step 4 You can select which rotation type will be applied to your device.
Shows the settings that have been selected by the user. Note If the MagicInfo icon is not displayed on the notification area, double click the MagicInfo icon on the window desktop.
Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the LCD Display.
• Do not use benzene, thinner or other flammable sub- stances. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel). • Never use acetone, benzene or thinner. ( They may cause flaws or deformation of the screen surface.
A: Check if the signal cable between the computer and the LCD Display is securely con- nected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Q: The screen is blank and the power indicator is off.
Q: The screen Color is inconsistent. A: Adjust the Color Control option in the OSD adjustment menu. Q: The Color image is distorted by dark shadows. A: Adjust the Color Control option in the OSD adjustment menu. Q: The Color white is poor. A: Adjust the Color Control option in the OSD adjustment menu.
A: Check if a special fluorescent or neon lamp is on in the vicinity. Q & A Q: How can I change the frequency? A: The frequency can be changed by reconfiguring the video card. Note That video card support can vary, depending on the version of the driver used.
Specifications General General Model Name 320MX-3, 320MP-3, 320MXN-3, 320MPN-3 LCD Panel Size 31.5 inches / 80 cm Display Area 697.68 mm(H) x 392.25 mm(V) Synchronization Horizontal 30~81 kHz Vertical 56~85 Hz Display Color 16.7M (true) Resolution Optimum resolution 1366 x 768 @ 60 Hz Maximum resolution 1920 x 1080 @ 60 Hz Maximum Pixel Clock 148.
VESA Mounting Interface 200.0 mm x 200.0 mm Environmental considerations Operating (With Network Box) Temperature : 50°F ~ 104°F (10°C ~ 40°C) Humidity : 10 % ~ 80 %, non-condensing Operating (Wit.
PowerSaverd State Normal Op- eration Power sav- ing mode Power off Power off ( Power Swich) Power Indicator On Blinking Amber Off Power Indi- cator 320MXN-3, 320MPN-3 ( With Net- work Box) 177 Watts 5.
Display Mode Horizontal Frequency (kHz) Vertical Fre- quency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 848 x 480 31.020 60.000 33.750 +/+ VESA, 1024 x 768 48.363 60.004 65.000 -/- VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1024 x 768 60.023 75.
Information For a Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for TFT- LCD.
Power Off, Screen Saver, or Power Save Mode • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one Color or a moving image is recommended.
Change the characters Color periodically • Use Bright Colors with little difference in luminance. - Cycle : Change the characters Color and background Color every 30 minutes • Every 30 minutes, change the characters with movement. • Have the images and logo cycle periodically.
• Apply the Screen Erasing function - Symptom: 2 Vertical blocks move while erasing the display Information.
Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.
Europe CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com DENMARK 70 70 19 70 http://www.samsung.com EIRE 0818 717100 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.com FINLAND 030 - 6227 515 http://www.
CIS BELARUS 810-800-500-55-500 - GEORGIA 8-800-555-555 - KAZAKHSTAN 8-10-800-500-55-500 (GSM: 7799) http://www.samsung.com KYRGYZSTAN 00-800-500-55-500 http://www.samsung.com MOLDOVA 00-800-500-55-500 - RUSSIA 8-800-555-55-55 http://www.samsung.com TADJIKISTAN 8-10-800-500-55-500 http://www.
Asia Pacific 02-689-3232 VIETNAM 1 800 588 889 http://www.samsung.com Middle East BAHRAIN 8000-4726 http://www.samsung.com Egypt 08000-726786 http://www.samsung.com JORDAN 800-22273 http://www.samsung.com Morocco 080 100 2255 http://www.samsung.com Oman 800-SAMSUNG (726-7864) http://www.
for performing multiple tasks as more image information can be shown on the screen. Example: If the resolution is 1366 x 786, this means the screen is composed of 1366 horizontal dots (horizontal res- olution) and 786 vertical lines (vertical resolution).
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this ma- terial. Samsung is the registered trademark of Samsung Electronics Co.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Samsung 320MXN-3 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Samsung 320MXN-3 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Samsung 320MXN-3 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Samsung 320MXN-3 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Samsung 320MXN-3, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Samsung 320MXN-3.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Samsung 320MXN-3. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Samsung 320MXN-3 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.