Manuale d’uso / di manutenzione del prodotto OSS500 del fabbricante Ryobi
Vai alla pagina of 16
Y our new oscillating spindle sander has been engineered and manufactured to Ryobi's high standard for dependability , ease of operation, and operator safety . Properly cared for , it will give you years of rugged, trouble-free performance. W ARNING: To reduce the risk of injury , the user must read and understand the operator ’s manual.
2 INTRODUCTION ■ Introduction ........................................................................................................................................................ 2 ■ Rules for Safe Operation ...................................
3 RULES FOR SAFE OPERA TION Safe operation of this power tool requires that you read and understand this operator's manual and all labels affixed to the tool. Safety is a combination of common sense, staying alert, and knowing how your tool works.
4 RULES FOR SAFE OPERA TION ■ DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by a qualified service technician at an authorized service center. ■ KEEP TOOL DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning.
5 RULES FOR SAFE OPERA TION The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger.
6 SPECIFICA TIONS Oscillating Range 5/8 in. (15.9 mm) Oscillations Per Minute 58 OPM Spindle Size 1/2 in. (12.7 mm) No Load Speed 2000 RPM Input 120 Volts, 60 Hz, AC only, 3.5 Amps Weight 49 lbs. (22.2 kg) UNP ACKING INFORMATION We have shipped the oscillating spindle sander completely assembled and ready to use with a 1 in.
7 Before using the oscillating spindle sander, familiarize yourself with all operating features and safety requirements. However, do not let familiarity with the tool make you careless. W ARNING: Exercise caution when using the oscillating spindle sander.
8 FEA TURES Fig. 1 W ARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
9 ADJUSTMENTS W ARNING: The sander should never be connected to a power supply when you are assembling parts, making ad- justments, cleaning, or when not in use. Disconnect- ing the tool will prevent accidental starting that could cause serious personal injury.
10 ADJUSTMENTS REMOVING SANDING SLEEVES See Figure 3. Follow these directions to remove sanding sleeves. ■ Unplug the sander. W ARNING: Failure to unplug the tool could result in accidental starting causing serious injury. ■ Grasp and hold the sanding sleeve on the spindle.
11 ADJUSTMENTS Fig. 5 THROAT PLATE HEX NUT UPPER SPINDLE WASHER SANDING SLEEVE SPINDLE WRENCH LOWER SPINDLE WASHER INSTALLING 1/2 INCH (12.7 mm) SANDING SLEEVES See Figure 5. Follow these directions to install 1/2 inch (12.7 mm) sanding sleeves. ■ Unplug the sander.
12 OPERA TION W ARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose particles being thrown into your eyes, resulting in possible serious injury. MOUNTING THE SANDER TO A WORK SURFACE See Figures 6 and 7.
13 OPERA TION OPERATING THE SANDER See Figures 8 and 9. Follow these directions to operate the sander. ■ Insert the switch key. ■ Turn on the sander by lifting the switch. ■ Let the motor build to its full speed. ■ Feed the workpiece gradually against the sanding sleeve from right to left.
14 W ARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. GENERAL Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
15 NOTES.
OPERA T OR'S MANUAL Oscillating Spindle Sander OSS500 - Double Insulated R YOBI TECHNOLOGIES INC. 1428 Pearman Dairy Road Anderson, SC 29625 Post Office Box 1207 Anderson, SC 29622 www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Ryobi OSS500 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Ryobi OSS500 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Ryobi OSS500 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Ryobi OSS500 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Ryobi OSS500, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Ryobi OSS500.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Ryobi OSS500. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Ryobi OSS500 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
