Manuale d’uso / di manutenzione del prodotto RSL-2701 del fabbricante Royal Sovereign
Vai alla pagina of 42
MODEL: RSL-2701 RSL-2701U RSL-380 ROLL LAMINATOR SERVICE MANUAL www.royalsovereign.com.
3 ~ 3 4 ~ 10 4 ~ 6 6 ~ 7 8 ~ 9 9 ~ 10 11 ~ 11 12 ~ 18 12 ~ 12 13 ~ 13 13 ~ 14 14 ~ 14 15 ~ 15 15 ~ 16 16 ~ 17 17 ~ 18 19 ~ 19 20 ~ 23 24 ~ 34 35 ~ 38 4.Adjustments …………………………………………………………………………………… 3.
3 1. Safety Precautions 3 Failure to comply a ny of the follo wing safety pro cedures could result in serious injury. Please read the instructions carefully and keep for future reference. 1. Only a licensed electrician should install wiring an d outlet for the lamin ator.
4.
2.1 Rol ler s Not Heat ing 1. The wire c onnect or fro m the heat er is disco nnect ed with MAI N PCB.(exce pt RSL-380 ) 2. The Wir e-Temp Fu se is disco nnected. 3. The Ma in Fuse i s defective.( except R SL-380) 4. The Bi -metal is defec tive. 5. The heat er in th e roller is defec tive.
2 The Wire-Tem p Fuse is disc onnected 1) Test if the Wir e-Temp Fu se is disco nnected w ith Mult i-test er. 2) If disc onnect ed, replace it with new o ne. 3. MAIN FUSE is disconnected.( except RSL- 380) 1) Test i f the Main Fus e is di sconnecte d with Mul ti-teste r.
5. The heater in t he roller is defective. 1) Test i f the he ater is di sconnected with Mul ti-teste r. 2) If disc onnect ed, replace it with new o ne. Replace Main PCB with ne w one according to How to replace Main P CB only when a ll of the abo ve mention ed heater wi re, wire ther mal fuse, heater a nd Bi-me tal are norm al.
1) Dis assemble the R ight co ver. (Refer to how t o replac e Cover- R.) 2) Disassemble the Bracket-Sensor with Sensor ass'y . Test if the Senso r ass'y is disconn ected with Mult i-tester. Again, Attach The Bracket- Sensor as the prope r positi on.
1) Dis assemble the R ight an d the Left c over. (R efer to ho w to repla ce Cover .) 2) Disassemble the Bracket-Sensor with Sensor ass'y . Test if the Senso r ass'y is disconn ected with Mult i-tester. 1) Test if the wir e thermal fu se is disco nnect ed with Mult i-test er.
2.3 Rol ler s Not Runni ng 1. Safety cover is not in pro per position. 2. Wire-Motor's connector is di sconnected. 3. Film is jammed on the ro llers. 4. Main PC B is defec tive. 5. Ma in motor is defec tive. Before troubleshooting, be sure to di sassemble the Right cover ,the Left cover an d the Rear cover.
3. Film is jam med on the roller s. 1) Fir st press r everse but ton. 2) Pull jamme d film slowl y to the b ack of the m achine. 3) If you feel film is jam med again , stop pres sing rever se butt on. 4) pres s run button, and then pul l jamm ed fil m to the b ack of the m achine.
2. Main fuse is discon nected.(except RSL-380) 1) Test i f the main fuse is d isconnec ted with Multi-tes ter. 2) If disc onnect ed, replace it wit new one. 3. Wire-AC IN i s not connected with Main PCB.(except RSL-380) 1) Check i f the Wire -AC IN are conn ected corr ectly.
13 2.5 Poor Laminat ion Quali ty Problem: Straig ht wave line s across th e outp ut. Cause: Exces sive fr ont rol ler pr essu re. Measure: Loosen the front roller pressure. Problem: Concav e wave s in th e lamin ation. Cause: Exces sive rea r (pu llin g) rol ler pr essur e.
Turn o ff the switch of the machine and then pull out the pow er cord plug from the electr ical outlet. 3.1. Right Cover 1) Unfasten 4 scre ws holding the Right cover and dis assemble the Right co ver. <RSL-2701/2701U> <RSL-380> 2) Pull out th e male connector f rom the Sub -PCB .
3.2. Left Cover 1) Unfasten 2 nu ts holding the Knob Tension 2) disassemble the Knob -Tension. 3) Unfasten 4 scre ws holding the Left cover and disassem ble the Left cover . 4) How to ass emble is the reverse order of how to disassem ble , 3)→2)→1 ).
3) Disassemble Wire connect to M AIN S/ W, POWER CORD. 4) Disas semble MAIN S/W an d POWER CORD. 5) How to assemble is the reve rse order of how to disassemble , 4)→3)→2)→1) . 3.4. Main PCB 1) Pull out a ll the connectors from th e main PCB . 2) Detach the main P CB from 4 white plastic supporters.
3.5. Sub PCB 1) Refe r to No 1.(Rep lacement of cover- R) 3.6. Heaters 1) Disassemble both the Right cover and th e Lef t cover (Refe r to No.1, No.2) .
4) Disas semble the Bu sh-Roller , Up holding t he upper heater. < Take of f Bush- Roller, Up from L aminating Roller > 5) Disas semble the l ower an d upper heater fr om the rol ler caut iously 6) How to assemble is the reverse order of how to disassemble , 5)→ 4)→3)→2) →1).
3)a. Disassemb le Frame upp er with Cross Cutte r.(RSL -2701/2701U) b. Disassemble Cross Cutter from th e Frame-C utter.(RS L-380) <RSL-380> 4) Disassemble the Cross Cutte r from the Frame -Upp er.(RSL -2701/2701U ) <RSL-2701/2701U> 5)a. How to assemble i s the reverse ord er of how to disassemble , 4)→3)→2) →1).
3) unfasten th e set screw (sprocke t motor) 4) take out th e sprocket motor from the motor 5) unfasten th e three screws from the motor 6) detach the connector and change the motor 7) How t o ass emble is the r everse o rder of how to disassemble , 6)→5)→4) →3)→2)→ 1).
21 Adjusting Front and Rear Roller when the machine is running, check that the top and the bottom films ar e fed in without any wrinkles. 19 with differen t thickness of s ubstrates. 5. Check above steps 2 through 4 with 3mil & 5mil films. lines indicate that it has less pressure at that point.
P NO. DATE 1 013L R2026A BASE-FRONT A L 6063 013L R2033A 20050317 013L R3075A 20060710 2 026004005A FOOT NATURA L RU BBER 3 013L R2027A BAS E-R EAR AL 6063 013L R2032A 20050317 013L R3076A 20060710 4 .
40 120L R4006A SHAFT-TENSION S45C 41 141L R4025A PLA TE- HOL DER SHAFT S PCC 2.0T 20091201 42 140L R4008A HOLDER-SHA FT FILM S45C 140LR4039A 20091201 43 12200X033A BEARING- RADIA L TRUST NTB1730 17* 30 44 147L R4008A PAD-TENSION LEA THER 1.
81 120L R4008A SH AFT-T ABLE S45C Φ8 82 021L R0002A COVER-R AB S PA- 765 431C 83 350L R3009A PCB-CONTROL ASS'Y FR-4 350L R3037A 20061221 20070420 84 021L R2006A KNOB-CONTROL A BS PA -765 431C 85 032L R3003A INLA Y-CONTROL EU,AU,UK PC T=0.25 85-1 032L R3003B INLA Y-CONTROL JAP,CUL PC T=0.
RSL-38 0 P NO. D ATE 1 013L R3069A BASE- F RONT SPCC 1.5T 2 026004005A FOOT NA TURAL RUBBER 3 013L R3070A BASE -REAR SPCC 1.5T 4 350L R3008C PCB-MAIN A SS' Y EU,AU,KR,CH,UK FR -4 4-1 350LR3008D P.
RSL-38 0 P NO. D ATE SVC P arts List No. Part No. Part Nam e Spec. CHA NGING RE MAR K 41-1 223L R3001E HEATER AS S'Y FCHW 1 24 Ω CUL ,UK 41-2 223L R3001F HEATER AS S'Y FCHW 1 16 .7Ω JAP 42 141L R4019A BRACKET- HEATER,UP SPCC 1.6T 43 141L R4027A STOPP ER-HEATER,UP PPS 147L R4013A 20070702 44 141L R4020A BRACKET- HEATER,L O SPCC 1.
RSL-38 0 P NO. D ATE SVC P arts List No. Part No. Part Nam e Spec. CHA NGING RE MAR K 78 381L R4051A WIRE- HEATER ， LIN K UL 1015 A WG #18 ， BLK 79 141L R4018A BRACKET-SENSOR SPCC 1.
Frame R Frame, Roller and Other View Wire, Front T able ,Film Shaft and Control PCB 6.2 RSL- 380 Explode View Frame R Frame, Roller and Other View Wire, Front T able and Safety Cover 6.
6.1 RSL-2701/2701U Expolde View 25.
Frame - L 26.
Frame - R 27.
Frame, Roller and O ther View 28.
Wir e, P ower core and Cont rol PCB 29.
6.2 RSL-380 Expolde Vi ew 30.
Frame - L 31 11 013LR 3067A FRA M E - L 12 141LR 4017A BRACK E T - P RE S S URE 13 141LR 4035A P L AT E- DU BUS H 14 141LR 4054A BRACK E T L I M I T S W I T CH 15 36400X 014B M I CRO S /W 16 021LR 400.
Frame - R 32 , 44 141LR4020A BRACKET-HEATER,LO 45 141LR4028A STOPPER-HEATER,LO 46 141LR4032A BRACKET-PRESSURE,LAMI 47 141LR4033A BRACKET-PRESSURE,PULL 48 363LR4001E BI-METAL 49 1 31LR4017A SPROCKET-LA.
Frame, Roll er and Ot her Vi ew 33.
Wire , Front Table and Safet y Cover 34 NO Pa r t N/ O P ar t N am e 52 014LR3001B TABLE-FRONT 53 145LR3002A GUIDE-DOCUMENT 54 023LR4002A KNOB-BOLT GUIDE 55 111LR4006A BOLT-GUIDE 56 0 13LR4004A FRAME-.
7. RSL-2701/2701U/380 Wire Diagram 35 AC 100 ~ 120V WIRE DIAGRAM.
36 AC 220 ~ 240V WIRE DI AGRAM.
<Conn ect part> 1. WIRE-M AIN : abo ve ph oto① →con nect SUB PCB. 2. WIRE-M OTOR: abov e phot o ② →conne ct th e motor ma in. 3. WIRE-HEA TER : above p hoto③ → c onnec t HEATER ASS'Y.
<FRAME-R L ayout> ; 100 ~ 120V 1. WIRE-MAI N : above photo ① → conne ct ab ove ph oto "<SUB -PCB Layout >" ① 2. SENSOR WIRE : ab ove ph oto ② → conne ct ab ove ph oto"<SU B PCB Layout >" ② 3. WIRE-HEATER : ab ove ph oto ③ → connect above photo BI-METAL .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Royal Sovereign RSL-2701 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Royal Sovereign RSL-2701 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Royal Sovereign RSL-2701 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Royal Sovereign RSL-2701 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Royal Sovereign RSL-2701, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Royal Sovereign RSL-2701.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Royal Sovereign RSL-2701. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Royal Sovereign RSL-2701 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
