Manuale d’uso / di manutenzione del prodotto CD-100K del fabbricante Rowe
Vai alla pagina of 165
CD -1 00K LA SER ST A R ® ST ARGLO FIELD SERVICE MANUAL & PAR TS CA T ALOG V OL UME 1 of 2 INST ALLA TION, PR OGRAMMING, ROUTINE SERVICE Part No. 21822666 Rev.
Rowe International, Inc. 1500 Union SE • Grand Rapids, MI 49507-1884 (616) 243-3633 Printed in USA CD -1 00K LASERST AR ® ST ARGLO FIELD SER VICE MANU AL & P AR TS CA T ALOG VOLUME 1.
ii 21822666 This page intentionally left blank..
21822666 iii Preface To make installation easier, this manual describes a typical installation. This “typical” installation only includes loading t he title rack and discs, setting up the sound system, and in some situations, modifying the pricing.
Table of Contents iv 21822666 SECTION 1 — INSTALLATION AND SYSTEM DESCRIPTION Introduction ......................................................................................................................................................... 1 - 1 Features .
Table of Contents 21822666 v SECTION 2 — INSTALLATION & PROGRAMMING (Continued) Procedures for Loading the Title Page Holder ................................................................................... ............. 2 - 4 Procedures for Loading Discs .
Table of Contents vi 21822666 SECTION 2 — INSTALLATION & PROGRAMMING (Continued) Options Menu ................................................................................................................... ............................... 2-39 More Options 1 Menu .
Table of Contents 21822666 vii SECTION 3 — ROUTINE SERVICE Introduction ......................................................................................................................................................... 3 - 1 Doing an Audit ..
viii 21822666 Figure 1-1. CD-100K Major Components Digital Display Shows the Selection Playing, Selection Being Made, Selections Remaining, the Message Center, and Service Mode Display Selector Keyboa.
.
1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer ’ s instructions.
W ARNING Do not plug the phonograph in until you verify it is configured for the proper mains voltage. BLACK WHITE WHITE BLACK 1 2 3 4 120~ MAINS SUPPL Y VOL T AGE SELECTOR BLUE BLUE 1 2 3 4 240~ MAIN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, FIRE HAZARD, AND PERSONAL INJURY ; NO OBJECTS FILLED WITH LIQUID, SUCH AS V ASES, SHALL BE PLACED ON THE APP ARA TUS. DO NOT REMOVE ANY COVERS, GUARDS, OR SHIELDS. NO USER SERVICEABLE P AR TS ARE INSIDE THIS PHONOGRAPH.
INTRODUCTION The CD-100K plays compact discs exclusively . The reliable CD mechanism holds up to 100 compact discs. These discs are played through a 1000 watt stereo amplifier .
CD-100K Phonograph 1-2 21822666 FEA TURES The major CD-100K features are: General Features: • All lighting done with LED’s. No fluorescent or incandescent lamps used.
Section 1: Installation & System Description 221822666 1-3 UNP ACKING INSTRUCTIONS This section contains information for unpacking the phonograph and installing it on location. The phonograph is shipped with all major components in place. Save all tie-down hardware in case the CD-100K must be moved to another location.
CD-100K Phonograph 1-4 21822666 Title Page Assembly in the “UP” Position Figure 1-2. Title Page Title Page Assembly 1. Remove the shipping screws from both ends of the lower title page assembly support bracket. 2. Remove the shipping band from the front of the title page assembly.
Section 1: Installation & System Description 221822666 1-5 Save all shipping hardware that you remove in the following six steps: Mechanism CD UNPACKING 1. Remove the CD changer mechanism shipping bolt from the back of the phonograph cabinet (see Figure 1-3).
CD-100K Phonograph 1-6 21822666 Do not proceed with unpacking until you read and understand the following caution: 4. Remove the rubber band on the hold-down plate. 5. Remove the rubber band, wire hook, and warning tag that hold the sprag lever out of the sprag wheel.
Section 1: Installation & System Description 221822666 1-7 CD Selection System CD selections are made by entering the four-digit selection number on the selector keyboard (see Figure 1-5).
CD-100K Phonograph 1-8 21822666 Autoplay When no selections have been made for a predetermined time, the Autoplay feature will play selections from a programmed list or make random selections. The choice of which selections are chosen, the selection sequence, and the selection interval can be programmed by the owner or service person.
Section 1: Installation & System Description 221822666 1-9 Two-Wire Volume Control A Rowe innovation, the two-wire volume control simplifies complex installations and reduces cost. A special preamplifier design permits volume control wiring using any unshielded two-wire cable.
CD-100K Phonograph 1-10 21822666 CD Changer Mechanism The CD changer mechanism, also referred to as the “mechanism” or “mech”, is located in the center of the cabinet’s interior. It is the primary mechanical component of the phonograph. The mechanism holds 100 CD’s and plays selections on command from the selection system.
Section 1: Installation & System Description 221822666 1-11 CAM SWITCH AND MOTOR ASSEMBLY The cam switch and motor assembly (see Figure 1-9) consists of the transfer motor, cam, and two cam switches. SPRAG ASSEMBLY This assembly locks the CD magazine in position.
CD-100K Phonograph 1-12 21822666 Mechanism Control Unit This solid-state switching unit controls the scan and transfer. Main Power Supply The main power supply (Figure 1-10) distributes unregulated +24 VDC, +12 VDC, and regulated +9 VDC to the phonograph.
Section 2: Installation & Programming 21822666 2-1 Section 2: Inst allation & Programming INTRODUCTION This section describes the installation and programming process.
CD-100K Phonograph 2-2 21822666 The following steps are a summary of the detailed Power On Process that is described in Section 5 of Volume 2. Step 1. Power switch on rear of phonograph is turned on, main power supply +9 VDC, +12 VDC, and +24 VDC LED’s light, and all modules and components receive power.
Section 2: Installation & Programming 21822666 2-3 Loading the Title Holder All of the titles on the title strip sheet can be used for either right- or left-hand titles. If your title strips have not been preprinted, you may want to type the titles before you tear the individual title strips off the title strip sheet.
CD-100K Phonograph 2-4 21822666 PROCEDURES FOR LOADING THE TITLE P AGE HOLDER 1. Tear each title strip from the title sheet so the perforated column appears on the side of the title strip. (The shaded portion of the title strip in Figure 2-1 represents a title strip that has been removed from the title sheet).
Section 2: Installation & Programming 21822666 2-5 PROCEDURES FOR LOADING DISCS Load discs as follows: 1. Unlock and open the top door. 2. Pull the SERVICE button out to the SERVICE position (refer to Figure 2-4) . The SERVICE switch is located in the upper right-hand corner of the cabinet.
CD-100K Phonograph 2-6 21822666 5. Check title strips and disc sequence to ensure that the titles and discs correspond. 6. After all titles and discs are in the proper places, perform a disc initialization. Initialization is performed in the following manner: NOTE: When loading discs, be sure to keep the magazine disc load approximately balanced.
Section 2: Installation & Programming 21822666 2-7 SETTING TITLE P AGE LIMITS FOR THE FIRST TIME This procedure gives you specific instructions on how to set the page limits only. The phonograph is shipped with all pages accessible. Pages 1 through 9 can be “flipped” and viewed.
CD-100K Phonograph 2-8 21822666 To Set Disc Prices: The Handy Case has a Price Card (see Figure 2-6A) that may be substituted for the Standard Price Card. The Handy Case also contains a Price Sheet with printed prices (see Figure 2-6B) which can be peeled off and placed at the appropriate location on the Price Card.
Section 2: Installation & Programming 21822666 2-9 Use the prices in the example that follows to help yourself better understand the phonograph’s pricing. Example CD Prices 4 for $1.00 9 for $2.00 25 for $5.00 NOTE: This example will not give the correct dollar amounts for U.
CD-100K Phonograph 2-10 21822666 11. Move down to the next play option (LEVEL 2 PLAYS) by pressing and holding RESET and then pressing 1 (enter 009 and press POPULAR). 12. Move down to the next play option (LEVEL 3 PLAYS) by pressing and holding RESET and then pressing 1 (enter 025 and press POPULAR).
Section 2: Installation & Programming 21822666 2-11 70-Volt Speakers To avoid prohibitive cable losses on long speaker lines (over 100 feet), use 70 V speakers. The power level in the 70 V speakers is set at each speaker. 250 watts of the 1000 watts is provided for 70 V speakers by A1, A2 connections on the audio output transformer assembly.
CD-100K Phonograph 2-12 21822666 Table 2-1 Extension Speaker Worksheet Sheet 1 SELECTING SPEAKER POWER General Instructions This section will lead you through the power and speaker selection process. This process consists of four major steps and several smaller steps.
Section 2: Installation & Programming 21822666 2-13 Table 2-1. Extension Speaker Worksheet Sheet 2 4-OHM SPEAKERS CONNECTED TO TRANSFORMER TAPS Place the quantity of speakers in the blank under QTY and multiply the quantity times the power consumption (show stereo speakers as 2 speakers).
CD-100K Phonograph 2-14 21822666 Table 2-1. Extension Speaker Worksheet Sheet 3 8-OHM SPEAKERS CONNECTED TO TRANSFORMER TAPS Place the quantity of speakers in the blank under QTY and multiply the quantity times the power consumption (show stereo speakers as 2 speakers).
Section 2: Installation & Programming 21822666 2-15 Table 2-1. Extension Speaker Worksheet Sheet 4 Combine consumptions of all speakers: Stereo Mono Connected to E1 - E7 ______ ______ Tapped 4-Ohm.
CD-100K Phonograph 2-16 21822666 Table 2-1 Extension Speaker Worksheet Sheet 4 (Continued) 3. The phonograph wires to change are the Violet (channel 1) and the Pink (channel 2) on the output transformer assembly (see Table 3-2A) . Use Table 3-2A as a guide to select the power used by the phonograph.
Section 2: Installation & Programming 21822666 2-17 This page intentionally left blank..
CD-100K Phonograph 2-18 21822666 CHANNEL 2 E1 E2 E3 E4 E5 E6 E7 E7 E6 E5 E4 E3 E2 E1 CHANNEL 1 70V MONO 70V 70V A1 A2 A1 A2 PINK VIOLET BLACK W/G W/O KEY O/B W/BL W/R O/B 1 2 3 4 5 6 7 P2 1 8 4 2 3 5 .
Section 2: Installation & Programming 21822666 2-19 CHANNEL 2 4 OHM SPEAKER (4 WA TTS) CHANNEL 2 8 OHM SPEAKER (8 WA TTS) + - + - + - + - + - + - + - + - + - CHANNEL 2 70 V SPEAKER (24 WA TTS) CHA.
CD-100K Phonograph 2-20 21822666 2 1 E1 E6 E7 E5 E4 E3 E2 B BR Y G BR/W G/W BL/W E7 E2 E1 E3 E4 E5 E6 Y BL/W B G/W BR/W G BR A1 A2 A1 A2 B/W B/W S S 2 1 BR B/W B G CHANNEL 1 OR 3 CHANNEL 2 OR 4 408321.
Section 2: Installation & Programming 21822666 2-21 This page intentionally left blank..
CD-100K Phonograph 2-22 21822666 SPEAKER SYNOPSIS 1000 WATTS OF RMS POWER PER AMPLIFIER OR 500 WATTS PER CHANNEL. The generic speaker wiring diagrams cover 4 to 32 speakers. Diagram 1 has a 4 speaker layout. If you only want the four speaker layout, then the maximum output of each speaker would have to be rated 4 ohms and capable of 300 watts.
Section 2: Installation & Programming 21822666 2-23 1000 watts Amplifier E1 E7 E1 E7 Speakers Left Channel Speakers Right Channel F our 4 ohm speak ers each rated at a minimum of 300 watts each.
CD-100K Phonograph 2-24 21822666 1000 watts Amplifier E1 E7 E1 E7 Speakers Left Channel Speakers Right Channel Series/P arall Hookup Sixteen 4 ohm speakers each r ated at a minimum of 75 w atts each (Note: Left channel is out of phase, plus + and min us -, in hookup with respect to right channel).
Section 2: Installation & Programming 21822666 2-25 1000 watts Amplifier E1 E7 E1 E7 Speakers Left Channel Speakers Right Channel Series/P arall Hookup Thir ty two 8 ohm speak ers each rated at a minimum of 50 w atts each (Note: Left channel is out of phase, plus + and min us -, in hookup with respect to right channel).
CD-100K Phonograph 2-26 21822666 1000 watts Second Amplifier Exter nal Only E1 E7 E1 E7 Speakers Left Channel Speakers Right Channel 1000 watts Amplifier E1 E6 Speakers Left Channel .
Section 2: Installation & Programming 21822666 2-27 This page intentionally left blank..
CD-100K Phonograph 2-28 21822666 Figure 2-8A. Remote Volume Control Diagrams Dual Remote Volume & Cancel Control 30632209 Dual Remote Volume & Cancel Contro 30632201.
Section 2: Installation & Programming 21822666 2-29 IR VOLUME CONTROL 2CH PREAMP Volume can be controlled by a 21958307 IR transmitter and a single- or dual-wired remote control. When the wired volume control is moved, the volume will quickly fade up or down to match its position.
CD-100K Phonograph 2-30 21822666 IMPORT ANT : + Before setting these controls, do Steps 1-5 in Table 2-2B to ensure that the amplifier is not overloaded.
Section 2: Installation & Programming 21822666 2-31 If the Room or Speaker System Requires a Trade-Off The equalizer limits the volume of all of the audio frequencies. Therefore, to achieve the best sound for a specific room or set of speakers, you may find that most of the graphic equalizer controls need to be turned down.
CD-100K Phonograph 2-32 21822666 Average or Moderately Absorbent Rooms These are the factory settings. 1 . Turn all seven right channel and seven left channel graphic equalizer controls fully counterclockwise. 2. The graphic equalizer’s controls should now be set as shown to the right.
Section 2: Installation & Programming 21822666 2-33 Paging Paging circuitry is part of the Preamplifier. The Microphone cable plugs directly into the preamplifier. CHANGING THE NUMBER OF CREDITS REMAINING Use these steps to increase or decrease the number of CREDITS REMAINING on the phonograph.
CD-100K Phonograph 2-34 21822666 If You “Get Lost” in the Menus Since the menu mode of pricing and programming does not require you to use any reference material, you may (occasionally) find that you have ventured down the wrong menu and that you don’t know what option is next.
Section 2: Installation & Programming 21822666 2-35 This page intentionally left blank..
CD-100K Phonograph 2-36 21822666 *SECURITY* ENTER CODE ---- SECURITY LEVEL - LVL 2 CODE ---- LVL 3 CODE ---- PHONO ID ---- VOID SRVC SW --- SECURITY IS --- MODEM ----------> 0 1 2 3 4 5 6 7 8 9 0- .
Section 2: Installation & Programming 21822666 2-37 NOTE: Shaded menu items are used only with the 4-channel AV Control and the Volume Control Unit (Studio Sound Package.
CD-100K Phonograph 2-38 21822666 Service Mode Menu The SERVICE MODE menu (referred to as the “MAIN menu”) is the starting point for all service, pricing, and programming functions. This menu contains the general title for each submenu. Some of the submenus contain commands only.
Section 2: Installation & Programming 21822666 2-39 To enter this menu from the MAIN menu: Type 3. Autoplay Autoplay is the function that plays CD’s when no customers have made selections. Autoplay can be used to stimulate play or provide background music.
CD-100K Phonograph 2-40 21822666 More Options 1 Menu This menu is a collection of options that allows you to: • Select FIFO or random playback of selections • Automatically lockout defective discs.
Section 2: Installation & Programming 21822666 2-41 HOW TO MAKE PROGRAMMING CHANGES The CD-100K allows you to perform programming activities in two ways. The primary or MENU mode uses menus to move through the choices until you find the desired function.
CD-100K Phonograph 2-42 21822666 Security Levels The CD-100K uses security levels to protect audit and programmable information. • Level 1 allows you to view all of the phonograph information, except the security codes, but does not allow you to change any of the information.
Section 2: Installation & Programming 21822666 2-43 Table 2-5A. Menu & Command Descriptions Code Description * SERVICE MODE * - Is the title of the MAIN menu. This menu is the beginning menu for all the other menus. All of the options in this menu are names for other menus.
CD-100K Phonograph 2-44 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 06 Security On/Off - If set to OFF, Security Level 3 is automatically established when entering the SERVICE MODE.
Section 2: Installation & Programming 21822666 2-45 Table 2-5A. Menu & Command Descriptions Continued Code Description 08 9 MODEM SPECIAL - Modem Special is a continuation of the MODEM menu. 0890 Modem Post Reports to a PC - If set to ON, the modem will call the office and send reports on the days that are active in menu item 0891.
CD-100K Phonograph 2-46 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 1 AUDITS - Are the functions and menus that allow you to display and reset the various accumulated figures for money, popularity, number of plays, and credits.
Section 2: Installation & Programming.
CD-100K Phonograph 2-48 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 1041 Current Number of Type 2 Coins - Displays the total number of Type 2 coins (10¢) collected since the last time the CLEAR CASH command (Selection 4 in the AUDITS menu) was used.
Section 2: Installation & Programming 21822666 2-49 Table 2-5A. Menu & Command Descriptions Continued Code Description 1 17 Overplay Counter - Displays the number of overplays selected since the last time the CLEAR PLAYS command (Selection 5 in the AUDITS menu) was used.
CD-100K Phonograph 2-50 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 21 Page Mode - Displays and toggles the automatic page selection mode. Hold RESET while pushing 9 to toggle OFF, CHANGE, or AD. Press POPULAR to save the change.
Section 2: Installation & Programming 21822666 2-51 Table 2-5A. Menu & Command Descriptions Continued Code Description 27 3 Scroll Message - Message editor for the 2nd scrolling line of a 2 line display. See Programming the Rowe Message Center .
CD-100K Phonograph 2-52 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 33 Cancel Initialization - Cancels initializations that have been started with either of the previous options (30 or 31). Press POPULAR to perform this function.
Section 2: Installation & Programming 21822666 2-53 Table 2-5A. Menu & Command Descriptions Continued Code Description 4 1 Delay Time - Displays and sets the time between Autoplay selections or displays and sets the time between giving a Credit.
CD-100K Phonograph 2-54 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 48 XX Cat - Assigns categories to discs in Enhanced Autoplay. 4 9 Schedule SMTWTFS - The active days, time(s), categories, and delay(s) between Autoplay selections in Enhanced Autoplay.
Section 2: Installation & Programming 21822666 2-55 Table 2-5A. Menu & Command Descriptions Continued Code Description 50 2 Coin SW2 = XX - Displays and sets the #2 COIN SWITCH VALUE. Type the new value and then press POPULAR. 50 3 Coin SW3 = XX - Displays and sets the #3 COIN SWITCH VALUE.
CD-100K Phonograph 2-56 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 52 PLAYS @ LEVEL : - Displays and edits # of plays or alternate plays at a given level, and sets alternate price times. 52 0 Not Used 5 2 1 Level 1 Plays = XX - Displays and sets the number of plays given for this credit level.
Section 2: Installation & Programming 21822666 2-57 Table 2-5A. Menu & Command Descriptions Continued Code Description 6 2 Premiums - Displays and sets premium selections. These selections (100 maximum) will be priced at 2 to 99 times the regular price (see Programming Autoplay, Premiums, Priorities, Lockouts, Pairs, and Menu Code 6995 ).
CD-100K Phonograph 2-58 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 693 Lockout Count - Adds the selection to the LOCKOUT LIST (60) when the DISC CONDITIONS NUMBER OF SKIP OCCURRENCES reaches the programmed value. To change the LOCKOUT COUNT, type the new number and then press POPULAR.
Section 2: Installation & Programming 21822666 2-59 Table 2-5A. Menu & Command Descriptions Continued Code Description 6992 Free Album - Allows entire albums to be selected if FREE PLAY (55) and ALBUM BUY (65) are ON. Hold RESET and press 9 to toggle this command ON and OFF.
CD-100K Phonograph 2-60 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 74 All Audit Report - Starts all 4 audit reports. 75 Setup Report - Starts the phonograph Setup Report. 76 Error History Report - Starts the Accumulated Phonograph Errors Report.
Section 2: Installation & Programming 21822666 2-61 Table 2-5A. Menu & Command Descriptions Continued Code Description 89 ON/OFF Cycles - Displays and changes the number of ON/OFF cycles. 9 DEVICE SETUP - The DEVICE SETUP menu activates and defines the AMPLIFIER, VOLUME CONTROL, and IR REMOTE options.
CD-100K Phonograph 2-62 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 3 means CH3 volume up/down switch controls AMP CH3 volume. Any of CH1, CH2, or CH4 switches will adjust AMP CH1, CH2, and CH4 volumes (those 3-amp volumes are locked together).
Section 2: Installation & Programming 21822666 2-63 Table 2-5A. Menu & Command Descriptions Continued Code Description 904 Mic 1 Routing - Sets MIC 1 to route to any or all of the 6 different PREAMP output channels (left to right: AUX R, AUX L, CH1, CH2, CH3, CH4).
CD-100K Phonograph 2-64 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 9096 Equalizer Ch 1,2 - Sets the Ch 1&2 5-band Equalizers. The range is 0 - 9 (left to right: CH1 - 59hz, 205hz, 790hz, 2.95khz, 12khz; CH2 - 59hz, 205hz, 790hz, 2.
Section 2: Installation & Programming 21822666 2-65 Table 2-5A. Menu & Command Descriptions Continued Code Description 90996 Playing Audio Muting - Sets the muting to the amp when playing an audio selection.
CD-100K Phonograph 2-66 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 909993 Playing Audio Output Select Ch 1,2 - Sets the output select for channel pairs 1&2 of the amp when playing audio. Set for one of following: (mono/mono = 1 , aux/aux = 2 , mono/aux = 3 , aux /mono = 4 , stereo/stereo = 5 ).
Section 2: Installation & Programming.
CD-100K Phonograph 2-68 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 9 11 Remote Selections - Displays and sets remote selections to ON, OFF, ICD, or XCD. If this command is set to ON, you can always use the IR remote control to make a selection or give a credit.
Section 2: Installation & Programming 21822666 2-69 Table 2-5B. CD-100K Command Index Function Menu Command Album free - on/off OPTIONS 6992 maximum tracks in a row OPTIONS 67 Select - on/off OPTI.
CD-100K Phonograph 2-70 21822666 Table 2-5B. CD-100K Command Index Continued Function Menu Command Autoplay autoplay/bgm volume DEVICE SETUP 96 autoplay days of the week enable AUTOPLAY 4 4 autoplay o.
Section 2: Installation & Programming 21822666 2-71 Table 2-5B. CD-100K Command Index Continued Function Menu Command Credit autoplay AUTOPLAY 40-44, 47 clear credits STATUS 8 2 display or change .
CD-100K Phonograph 2-72 21822666 Table 2-5B. CD-100K Command Index Continued Function Menu Command Factory loads factory load all - automatic OPTIONS 6996 factory load amplifier settings DEVICE SETUP .
Section 2: Installation & Programming 21822666 2-73 Table 2-5B. CD-100K Command Index Continued Function Menu Command Modem answer off time MODEM 08 2 answer on time MODEM 0 81 connect delay MODEM.
CD-100K Phonograph 2-74 21822666 Table 2-5B. CD-100K Command Index Continued Function Menu Command Popularity clear disc pop AUDITS 1 3 clear sel pop AUDITS 1 6 disk AUDITS 17,18 least popular discs A.
Section 2: Installation & Programming 21822666 2-75 Table 2-5B. CD-100K Command Index Continued Function Menu Command Reports all audit REPORTS 7 4 baud rate REPORTS 78 cancel REPORTS 7 9 carriage.
CD-100K Phonograph 2-76 21822666 Table 2-5B. CD-100K Command Index Continued Function Menu Command Software level STATUS 8 8 “Thank You” message on/off OPTIONS 6993 Time and date change INITIALIZE.
Section 2: Installation & Programming 21822666 2-77 For Priorities Programming Type Display Shows 6 *OPTIONS* 1 PRIORITY 00 ---- For Premiums Programming Type Display Shows 6 *OPTIONS* 2 PREMIUMS .
CD-100K Phonograph 2-78 21822666 LOCKOUT AND TIMED LOCKOUT MODES To lockout a disc, enter the two-digit disc number followed by two zeros. To lockout a selection, enter the four- digit selection number.
Section 2: Installation & Programming 21822666 2-79 1 . Turn Timed Freeplay On Example: The example shown in Figure 2-11 shows the Multiple Freeplay On/Off Times sheet filled out for Sunday and Monday.
CD-100K Phonograph 2-80 21822666 2 . Plan the Schedule Scheduling Freeplay is simple, just remember these rules: SCHEDULING RULES The schedule must have one ON time and a corresponding OFF time for each scheduled time. These times must follow these simple restrictions: Examples: Monday O N O F F Wrong - The OFF time is set before the ON time.
Section 2: Installation & Programming 21822666 2-81 4 . Copy the Schedule Now to program the phonograph for the rest of the week. You can copy the schedule you just made into any/all of the remaining days of the week. To make the schedule for Tuesday through Friday the same as Monday: A .
CD-100K Phonograph 2-82 21822666 Character Map Note #1. A A . Inserting or Changing Messages: Push 2 (see Note #1) When the desired item is flashing, push POPULAR to execute. Hold RESET and repeatedly push 3 to select item. 1. The display screen reads MSG 1 EDT DEL VU.
Section 2: Installation & Programming 21822666 2-83 Example for programming a new message When this example is complete, the display will read HELLO TOM as message number three. A . Follow step AA to obtain MSG 1 EDT DEL VU. B . Push key 3 to edit message three.
CD-100K Phonograph 2-84 21822666 Example for correcting or editing an existing message When the example is complete, the display will read TOPS IN MUSICLAND for message 6. Previously, this message displayed TOYS FOR TOTS. Note - all editing keys will be used to show their effect on the message.
Section 2: Installation & Programming 21822666 2-85 12 345678 9 1 0 1 1 1 2 1 3 1 4 1 5 1 6 AM S G 1D E LE D T V U BM S G 6 ED T D E L VU CO Y S F O R DT O P SF O R T O T ET O P S I OR T O T S FT .
CD-100K Phonograph 2-86 21822666 BB. Setting the daily message display time(s): Push 0 (see NOTE #1 on Page 2-56) When you initially program a message, you must activate the daily message display timer for that message. This section discusses how to program messages to play at any given time of day for the week.
Section 2: Installation & Programming 21822666 2-87 Example for setting up the message daily timer When this example is completed, message 4 will display every day from 12:00 (00:00) midnight until 11:59 (23:59) PM (see Table 2-8 for Display Example) .
CD-100K Phonograph 2-88 21822666 Setting the Master ON/OFF Date: Push 1 (see Note #1 on Page 2-56) Messages 1-8 can play every day unless they are changed in the MASTER ON/OFF DATE menu. By scheduling messages to play on specific dates, you may tailor messages (such as “HAPPY BIRTHDAY JOE”) to play on special dates.
Section 2: Installation & Programming 21822666 2-89 SETTING UP ENHANCED AUTOPLA Y 1. Set COMMAND 40, AUTOPLAY IS, to: ENH (COMMAND 41, DELAY, is not used in Enhanced Autoplay). 2. Set COMMAND 42, START TIME, to: 00:00 (this is the factory setting).
CD-100K Phonograph 2-90 21822666 Setting Up Enhanced Autoplay Schedules (Commands 48 and 49) Enhanced Autoplay provides up to 20 events each day of the week for a total of 140 events per week. Before you begin entering specifics for these events, some preliminary work must be done.
Section 2: Installation & Programming 21822666 2-91 2. Make the Category Entries KEY FUNCTIONS Some key combinations have slightly different meanings in the Autoplay menus. Table 2-9 shows what these key combinations do in the Schedule (display shows: SCHEDULE SMTWTFS) and in the Set Time (SU 01 TIME) modes.
CD-100K Phonograph 2-92 21822666 USING RESET + 9 IN THE CATEGORY MENU RESET + 9 toggles between DISC mode and CATEGORY mode. DISC MODE DISC mode (the = sign is ahead of the disc number) only allows you to change the disc number that is displayed. Use this mode to change the disc number easily.
Section 2: Installation & Programming 21822666 2-93 3 . Plan the Schedule The schedule determines on which day and at what time of day that Autoplay categories are allowed to play (this is called an event).
CD-100K Phonograph 2-94 21822666 Working Example of Enhanced Autoplay P AUL ’S AUTOPLA Y SCHEDULE Paul wants his Rowe Jukebox to automatically play music at certain times of the day.
Section 2: Installation & Programming 21822666 2-95 DISC CATEGORY LIST Date ____ 9-13-02 _____ Location ________ Paul’s __________ Name each of the eight categories and then assign the discs to each category.
CD-100K Phonograph 2-96 21822666 3. Paul then enters the information shown in Figure 2-12 in the following sequence: A . Paul enters the SERVICE mode. The list that follows shows what keys he presses and displays what he sees after he presses the keys.
Section 2: Installation & Programming 21822666 2-97 AUTOPLAY SCHEDULE Location: Paul’s Restaurant Date: 6-8-95 Fill in the Autoplay event times, delay times, categories, and volume changes before you make the actual scheduling changes.
CD-100K Phonograph 2-98 21822666 Step # Keystroke 14 Press Keys 0, 7, POPULAR, 3, 0, POPULAR 15 Press RESET + 9 16 Press RESET + 9 17 Press RESET + 9 18 Press RESET + 9 19 Press RESET + 9 20 Press RES.
Section 2: Installation & Programming 21822666 2-99 This completes the entries for the 6 events on Sunday’s schedule. Copying the Schedule The last step is to program the phonograph for the rest of the week. Paul decides to save some time by copying the schedule into the remaining days of the week.
CD-100K Phonograph 2-100 21822666 This page intentionally left blank..
Worksheet Masters - - - - - - - - On the following pages you will find blank worksheet masters for Multiple Free Play On/Off Times, the Disc Category List, and the Autoplay Schedule. Carefully remove these masters from this manual and copy them freely for your use.
.
WM-2 DISC CATEGORY LIST Date _______________ Location ____________________ Name each of the eight categories and then assign the discs to each category.
.
MULTIPLE FREE PLAY ON/OFF TIMES Fill in the START times, STOP times, and the COMMENTS before you make the actual scheduling changes. Sunday O n O f f Comment 1 ___:___ ___:___ ___________________ 2 __.
.
AUTOPLAY EVENT SCHEDULE Day: _______________ Location _______________ Fill in the Autoplay event times, delay times, categories, and volume changes before you make the actual scheduling changes.
.
SERIAL # ________________ LOCATION___________________ ROWE CD PHONO OPERATOR’S SETUP SHEET SUGGESTION: Record any changes on this log and keep for future reference. INSTRUCTIONS 1. Items in parentheses do not appear on the digital display. 2. Customer fills in blanks where program differs from factory settings.
.
WM-6 * INITIALIZE * 3 5 CONDITION LOG 0 5 ___________________________ 3 6 SKIP CANCEL 9 9 ___________________________ 37 TI ME C AN CE L 99 ___________________________ 3 8 TIME 1 EASTERN STD.
.
* OPTIONS * 6 0 LOCKOUTS (50 MAX) 5 00______ 00_________________________ 01_________________________ 02_________________________ 03_________________________ 6 1 PRIORITY (100 MAX) 5 00______ 00_______.
.
* REPORTS * 7 8 BAUD RATE 9600 ___________________________ (600/1200/2400/4800/9600) CR MS DELAY 0 ___________________________ SPEC REPORT 0 ___________________________ * DEVICE SETUP * 9 2 MAIN DISP .
.
* MORE AMP 3 * 909990 SBY MUT 00000000 ___________________________ 909991 BGM MUT 00000000 ___________________________ 909992 MIC MUT 11111111 ___________________________ 909993 PLY AU MOD 1/2 5 _____.
.
Section 2: Installation & Programming 21822666 2-101 OPTIONAL STUDIO SOUND SYSTEM Introduction The Studio Sound system can use one or two digital power amplifiers. Each 2-channel digital power amplifier is rated 1000 (500 x2) watts RMS @ 2 ohm load.
CD-100K Phonograph 2-102 21822666 Audio/Video Controller Description The extremely versatile 4 channel Audio/Video Controller transforms audio signals from the CD player, microphones, background music equipment (tuner, tape, etc.), and other sound processors/equipment/ systems, into signals for the Power Amplifier.
Section 2: Installation & Programming 21822666 2-103 Amplifier Factory Load The AUDIO/VIDEO CONTROLLER has many programming options. For your convenience, service mode menu item 95 restores the amplifier programming to factory settings.
CD-100K Phonograph 2-104 21822666 • RCA jacks for surround sound • Jacks marked: • CH1 - CH2 SIGNAL OUTPUT, CH1 + CH2 SIGNAL OUTPUT • CH3 - CH4 SIGNAL OUTPUT, CH3 + CH4 SIGNAL OUTPUT • RCA j.
Section 2: Installation & Programming 21822666 2-105 This page intentionally left blank..
CD-100K Phonograph 2-106 21822666 CD/STEREO MECHANISM INPUT L (J41) CD/STEREO MECHANISM INPUT R (J42) STEREO A (BGM) INPUT L (J40) STEREO A (BGM) INPUT R (J43) STEREO B INPUT L (J39) STEREO B INPUT R (J44) MONO C (BGM) INPUT (P2) (J30) FRONT END PROGRAM SELECTOR and MUTING AUTOMA TIC VOLUME CONTROL (A VC) and MUTING L CHAN R CHAN L CHAN.
Section 2: Installation & Programming 21822666 2-107 RESET RESET ROWELINK COM. CONTROL COM. CONTROL ROWELINK ISOLA TED INTERF ACE FROM/TO CCC Modular Jack (J29) STUDIO SOUND AUDIO BLOCK DIAGRAM Ex.
CD-100K Phonograph 2-108 21822666 BGM Mode go to BGM after delay Playing Karaoke Mode CD (J41, J42), Stereo A (BGM) (J40, J43), Stereo B (J39, J44), Mono C (BGM) (J38) 90993 Front-end Program Selected.
Section 2: Installation & Programming 21822666 2-109 Factory setting sets all mic's to paging, and phonograph type to CD. Factory setting is RIGHT volume is 63 (maximum) and equalizers have factory settings.
CD-100K Phonograph 2-110 21822666 V olume Control Unit Blue Y ellow Green Red Black White 6 5 4 3 2 1 +9 COM +9 VDC ROWELINK A ROWELINK B MUTE NOT SYSTEM RESET 1 2 3 4 5 6 6 5 4 3 2 1 6-Conductor Modu.
INTRODUCTION Routine and preventive maintenance are to be performed on your normal periodic service call. This section discusses how to change compact discs and titles, how to collect money, audit statistics, and preventive maintenance procedures. DOING AN AUDIT The following pages describe how to: 1.
CD-100K Phonograph 3-2 21822666 Cash Audits 1. Type 100. This displays the CURRENT CASH value. Record the CURRENT CASH figure in your usual way and go to the next step. 2. Press and hold RESET, and then press 1. This will move you down to the next display.
Section 3: Routine Service 221822666 3-3 3. Press and hold RESET while you press POPULAR twice. This returns you to the main menu. Most Popular Selection 1. Type 19. The most popular selection number will be displayed. 2. To display the next most popular selection, press and hold RESET, and then press 3.
CD-100K Phonograph 3-4 21822666 CHANGING CD’S AND TITLES The procedure for loading CD’s and titles into an empty phonograph is different from the procedure to change CD’s and titles. Please be sure you are following the procedure that describes your situation.
Section 3: Routine Service 221822666 3-5 5. Repeat Step 4 until all discs have been changed. 6. Release the two catches holding the keyboard/display. 7. Place the SERVICE switch in the SERVICE mode and check that * SERVICE MODE * is on the keyboard display.
CD-100K Phonograph 3-6 21822666 COMPLETE AUDIT COMMAND LIST Table 3-1 is a complete list of the Audit commands with an explanation of what each command does.
Section 3: Routine Service 221822666 3-7 Table 3-1. Audit Commands Continued Command Description 19 Display the Most Popular Selection - Displays the most popular selection number (Disc 00-99 followed by Selection 00-99, a total of four digits) followed by the number of plays (9999 maximum) that selection had.
CD-100K Phonograph 3-8 21822666 Table 3-1. Audit Commands Continued Command Description 1 1 PLAY AUDITS - Allows you to display, but not change, credits, autoplays, mechanism plays, and album plays. 1 1 0 Free Credits - Displays the number of free credits given since the last time the CLEAR PLAYS command (Selection 5 in the AUDITS menu) was used.
Section 3: Routine Service 221822666 3-9 Table 3-1. Audit Commands Continued Command Description 122 Coin - Displays total coin cash received by the coin acceptor. 12 3 Wallbox - Displays total cash received by all Wallboxes. 12 4 Free - Displays total free credits.
CD-100K Phonograph 3-10 21822666 COLLECTING MONEY 1. Open the top door and unlock the bill acceptor bill box by reaching in behind the bill acceptor. 2.
Section 3: Routine Service 221822666 3-11 CD Player Laser Lens The CD player laser lens can collect dust, dirt, and smoke. These deposits can cause various intermittent problems that may, in time, become more severe. To avoid these problems, we recommend that you clean the laser lens occasionally.
CD-100K Phonograph 3-12 21822666 COIN ACCEPTORS (O ptional) COIN MECH (Optional) The phonograph is equipped to physically mount a 3.5 inch wide (80mm) coin acceptor, mechanical or electronic version, with an accepted coin diameter from .7 (18mm) to 1.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Rowe CD-100K è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Rowe CD-100K - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Rowe CD-100K imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Rowe CD-100K ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Rowe CD-100K, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Rowe CD-100K.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Rowe CD-100K. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Rowe CD-100K insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
