Manuale d’uso / di manutenzione del prodotto SGS395X del fabbricante Roper
Vai alla pagina of 16
Thank you for choosing a Roper appliance. This Use and Care Guide will help you operate and maintain your new, quafity- built Roper range. Keep this Use and Care Guide in a safe place for future reference. Complete and mail the Product Registration Card.
Important Safety Instructions Gas ranges have been thoroughly tested for safe and efficient operation. However, as with any appliance, there are specific mstallatlon and safety precautions which must be followed to ensure safe and satisfactory operation.
16. Grease is flammable and should be handled carefully. Let fat cool before attempting to handle it. DO NOT allow grease to mllect around cooktop or in vents. Wipe spill-overs immediately. 17. DO NOT use water on grease fires. Never pick up a flaming pan.
Using Your Range Oven indicator Left front Electronic clocWTv¶inute Surface burner Clean indicator Setting the electronic clock The electronic clock is a digital clock with a Minute Timer and automatic control cooking cycle. Time-of-day, Minute Timer times and cook times are set by pushing command buttons on either side of the display.
Using the oven Baking 1. Position the rack(s) properly before turning on the oven. To change rack position, pull rack out to stop, raise front edge and lift out.
Using the Cook Timer The automatic Cook Timer is designed to turn the oven on and off at times you set, even when you are not around. Automatic baking is ideal for foods which do not require a preheated oven such as meats and casseroles. Do not use the automatic cycle for cakes, cookies, etc.
The storage drawer The storage drawer IS for storing pots and pans. The drawer can be removed to make it easier to clean under the range, and to check for installation of the anti- tip bracket(s). Use care when handling the drawer. Removing the storage drawer: I---w Lever 1.
Caring For Your Range Bum, Electrical Shock, Fire And Explosion Hazard l Make sure all controls are OFF and the range is cool before cleaning. m Do not use oven cleaners, bleach 01 rust removers. m Do not use gasoline or other flammable liquids or vapors to clean this or any other appliance.
‘Using the Self-Cleaning cycle The Self-Cleaning cycle uses very high heat to burn away ~011. Before you start, make sure you understand exactly how to use the Self-Cleaning cycle safely. Before you start Hand clean bame Hand clean door around edge I Do not hand clean seal 1.
Setting the controls To start the Self-Cleaning cycle immediately: 1. Set the Oven Selector to CLEAN. 2. Make sure the clock has the correct time-of-day. (See “Setting the electronic clock” on page 4.) 3. Move the Lock Lever all the way to the right - the Clean position.
PART Exterior surfaces WHAT TO USE Warm, soapy water and a soft cloth. Non-abrasive plastic scouring pad for heavily-soiled areas. HOW TO CLEAN l Wipe off regularly when range is cool. ADO not allow food containing acids (such as vinegar, tomato or lemon juice) to remain on surface.
The oven light The oven light will come on when you open the oven door. To turn the light on when the oven door is closed, push the Oven Light Switch on the control panel.
Before You Call For Service If you are having an operating problem, check the chart to see what the cause might be before you call for assistance. OPERATING PROBLEM Nothing operates. Oven will not operate. CHECK IF . Range is properly connected to gas and electrical supplies.
Lf the Self-Cleaning cycle will not operate. Cooking results a.re not what you expected. The oven temperature seems too low or too high. CHECK IF .YOU pushed in knob(s) before trying to turn. . The Oven Selector is set to CLEAN. . A delay start time is set.
THIS PAGE INTENTIONALLY LEFT BLANK.
LIMITED WARRANTY - Home Appliances LENGTH OF WARRANTY (From date of purchase) FULL ONE YEAR WARRANTY PRODUCTS COVERED All Roper Appliances FULL FIVE YEAR WARRANTY Refrigerators Freezers Air Conditione.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Roper SGS395X è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Roper SGS395X - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Roper SGS395X imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Roper SGS395X ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Roper SGS395X, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Roper SGS395X.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Roper SGS395X. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Roper SGS395X insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
