Manuale d’uso / di manutenzione del prodotto VR-760 del fabbricante Roland
Vai alla pagina of 120
Thank you, and congratulations on your choice of the Roland Performance Keyboard VR-760. 201b 202 Copyright © 2003 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
2 To resize thickness, move all items on the front cover CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
3 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. .......................................................................................................... 002b • Do not open or perform any internal modifica- tions on the unit.
4 012a: • Immediately turn the power off, remove the power cord from the outlet, and request servicing by your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as li.
5 IMPORTANT NOTES 291b In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2 and 3, please read and observe the following: Power Supply 3.
6 Before Using Cards Using DATA Cards • The VR-760’s memory card slot accepts CompactFlash memory cards. Microdrive storage media by IBM are not compatible. • CompactFlash and are trademarks of SanDisk Corporation and licensed by CompactFlash association.
7 Main Features Emphasis on Basic Keyboard Functions for Stage Use ■ Handles Organ, Piano, and Synthesizer Parts The VR-760 is a 76-key portable keyboard that integrates extremely high-quality “organ,” “piano,” and “synthesizer” sounds, so important for bands who need to cover organ, piano, and synthesizer parts, all in one unit.
8 Contents USING THE UNIT SAFELY...................................................................................................................... 3 IMPORTANT NOTES ..................................................................................
9 Basic Operation of the Organ Part .......................................................................................... 33 The “Harmonic Bars” That Change the Composition of the Organ Tone ............................ 33 [H-Bar Manual] button .
10 MIDI Settings that Act on the VR-760 Globally (SYSTEM MIDI) ............................................ 67 Connecting/Disconnecting the Sound Generator and Keyboard .............................. 67 Setting the Device ID Number ...................
11 Connecting External MIDI Devices ...................................................... 79 Recording VR-760 Performances to an External MIDI Sequencer ....................................... 79 Connecting to External Sequencer .....................
12 Panel Descriptions Front Panel fig.panÇçelF ig.panelF 1. [MASTER VOLUME] knob Adjust the overall volume (p. 20). 2. RHYTHM RHYTHM [ON] button Switch the rhythm on/off (p. 53). [RHYTHM VOLUME] knob Adjusts the volume level of the Rhythm part (p. 53).
13 Panel Descriptions ig.panelF 8. REGISTRATION [BANK] button Press these to select the REGISTRATION banks ( p. 29, p. 54). [1] – [8] button Press these to select the REGISTRATION numbers ( p. 29, p. 54). Additionally, press these to select the Edit menu ( p.
14 Panel Descriptions ig.panelF Piano Section 21. PIANO TONE PIANO [VARIATION] button You can change the tone variation. Each Tone button holds three different variations; as you switch the variations the button indicators changes, cycling through off, red, and green (p.
15 Panel Descriptions Rear Panel fig.panelR 1. [POWER] Switch Switch turns the power on/off (p. 19). 2. AC Inlet Connect the included power cable to this inlet ( p.
16 Before You Begin Playing Connecting the Power Cord 1. Before making a connection, make sure that the VR-760 is turned off. 2. Connect supplied power cord to the VR-760, and plug the other end into a power outlet.
17 Before You Begin Playing Before You Begin Playing Connecting the VR-760 to External Equipment The VR-760 is not equipped with an amplifier or speakers. In order to hear the sound, you will need to connect audio equipment such as a monitor speaker system or stereo set, or use headphones.
18 Before You Begin Playing ■ Connecting Pedals Connect the optional pedal (DP-8, etc) to one of the Pedal jacks. When connected to the Damper jack, the pedal can be used as a damper pedal. Connecting the pedal to the CONTROL jack allows you to assign a variety of functions to the pedal (p.
19 Before You Begin Playing Before You Begin Playing Turning the Power On and Off NOTE Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
20 Before You Begin Playing Adjusting the Volume fig.01-05(Volume) 1. Adjust the volume using the [MASTER VOLUME] knob. Rotating the knob clockwise to increase the volume; counterclockwise rotation decreases it. Also adjust the volume of the connected device to an appropriate level.
21 Before You Begin Playing Before You Begin Playing 1. Hold down the [EDIT] button, and press the REGISTRATION [7] (UTILITY) button. The Edit’s “UTILITY” screen is displayed. 2. Press CURSOR [ ] button to display the “Factory Reset” screen.
22 Before You Begin Playing Tuning to Other Instruments’ Pitches (Master Tune) For a cleaner ensemble sound while performing with one or more other instruments, ensure that each instrument’s basic pitch is in tune with that of the other instruments.
23 Overview of the VR-760 Overview of the VR-760 Basic organization of the VR- 760 The VR-760 can be divided into three sections: a keyboard controller section , a sound generator section , and a effects section . The three sections are connected internally by means of MIDI.
24 Overview of the VR-760 Composition of the VR-760’s Parts The VR-760 uses the following parts. ■ 1. Organ Part This is the part that controls the organ sound generator. The VR-760 features one organ part, and you can control the tone with the harmonic bars (p.
25 Overview of the VR-760 Overview of the VR-760 Basic Operation of the VR- 760 ■ Main Screens Each of the organ, piano, synth, and rhythm parts features a Basic screen; you can move through the different parts by pressing the CURSOR [ ][ ] button. The registration name for the organ, piano, and synth parts appear in the first row.
26 Overview of the VR-760 ■ About the Controller Section The easy-to-understand arrangement of VR-760’s buttons and knobs is based on the different controls’ functions. About the CURSOR Buttons The CURSOR [ ][ ][ ][ ] buttons are used for switching screens, and for moving to an item whose setting you want to change (by moving the cursor).
27 Demo Song Listening to the Demo Songs Here’s how to listen to the demo songs. The VR-760 features the internal demo songs that exhibit the special capabilities of the instrument. fig.03-01(sousapanel) 1. Hold down the [ENTER] button, and press the [EXIT] button.
28 Performing with the Keyboard Performing the Organ, Piano, or Synth Individually (ONE TOUCH) The VR-760 is normally set to allow you to perform with the organ, piano, and synth parts all playing together (layered). If you want to play only the organ, piano, or synth part, you will need to mute the other parts.
29 Performing with the Keyboard Performing Performing with a Variety of Tones (REGISTRATION) The VR-760 comes with settings including organ, piano, and synth settings as well as part combination settings pre-stored in the registrations.
30 Performing with the Keyboard Changing the Volume Level of Each Part You can change the volume level of Organ, Piano, Synth, and Rhythm parts. fig.04-04(VolumeKnobs) Adding Reverberation to the Sound The VR-760 can apply a reverb effect.
31 Performing with the Keyboard Performing Changing the Overall Tone Quality (MASTER EQ) fig.04-06(EQ) MASTER EQ is equalization that is applied to all of the parts. You can alter the tonal coloration by adjusting the [LOW], [MIDDLE], and [HIGH] knobs.
32 Performing with the Keyboard ■ Aftertouch You can change the sound by pressing the keys with even greater force. The effect applied is predetermined for each tone, and cannot be changed. ■ Damper Pedal With a damper pedal connected to the DAMPER PEDAL jack on the VR- 760’s rear panel, you can then add reverberation to the sound.
33 Performing with the Keyboard Performing Basic Operation of the Organ Part ■ The “Harmonic Bars” That Change the Composition of the Organ Tone The harmonic bars are controllers for creating the basic structure of the organ sound. By sliding nine harmonic bars in and out you can create a variety of tonalities.
34 Performing with the Keyboard The numbers (16', 5-1/3', etc.) printed on the knob of each harmonic bar indicate the pitch of that bar in “feet.” The pitch of each harmonic bar plays an important role in creating the tone. The 8' pitch is the basic pitch of the sound, and the sound is created based on this 8' pitch.
35 Performing with the Keyboard Performing ■ [H-Bar Manual] button When this function is used, the harmonic bar settings will change from the settings of the registration to the positions (settings) of the harmonic bars on the panel.
36 Performing with the Keyboard Organ Section fig.04-10a(OrganSection) ■ Changing the Organ Sound (Tone Wheel) Tone wheel and Leakage Noise are important elements in creating tone wheel organ sounds. Tone wheel Tone wheels are the ninety-one metal disks that produce the sound on tone wheel organs.
37 Performing with the Keyboard Performing Each time you press the [TONE WHEEL] button, the tone wheel will switch between the following settings. ■ Adding Modulation to the Sound (Vibrato and Chorus) The vibrato effect cyclically modulates the pitch of organ voice sounds.
38 Performing with the Keyboard ■ Adding Crispness to the Sound (Percussion) Percussion adds an attack-type sound to the beginning of the note to give the sound more crispness. When you play legato (smoothly and connectedly), percussion will be added only to the first-played note.
39 Performing with the Keyboard Performing [SOFT] (Soft Percussion) button Switches the volume of the percussion. fig.04-14(SoftPercIllustration) Button Explanation Lit (ON) The percussion sound will be softer. Dark (OFF) The percussion sound will be normal.
40 Performing with the Keyboard [SLOW] (Slow Percussion) button Switches the speed at which the percussion sound will decay. fig.04-15(SlowPerc) Button Explanation Lit (ON) The percussion sound will disappear slowly. The percussion will have a more gentle attack.
41 Performing with the Keyboard Performing ■ Changing the Virtual Amp (Amplifier) fig.04-16(AmpKnobs) Changing the Virtual Amp Switches the frequency response and cabinet resonance of the virtual amp. 1. Press the [AMPLIFIER] button to select the type of virtual amp.
42 Performing with the Keyboard ■ Adding the Rotary Speaker Effect (Rotary Sound) Rotary Sound is an effect which adds the modulation that is produced when organ voices are used with a rotary speaker. On most rotary speakers, the high-frequency speaker and low-frequency speaker rotate at different speeds.
43 Performing with the Keyboard Performing Basic Operation of the Piano Part fig.04-17a(PianoSection) ■ The “Tones” That Change the Piano Tone You can switch among nine tones to select the tone you want for the piano part. The nine tones can be selected from three tones and three variations.
44 Performing with the Keyboard ■ Changing the Characteristics of the Sound “Mic/Amp” The VR-760 features mic and amp modeling for the piano part, and the most appropriate modeling is selected when a tone is selected. What’s more, you can further adjust the sound with the [TYPE] button and [DISTANCE/EQ] knob.
45 Performing with the Keyboard Performing 2. Turn the [DISTANCE/EQ] knob to set the type of sound characteristics you like. Mic modeling provides an effect simulating the change in distance between the sound source and the mic.
46 Performing with the Keyboard Basic Operation of the Synth Part fig.04-20a(SynthSction) ■ The “Tones” That Change the Synth Tone You can switch the synth part to select the tone you prefer from 18 different tones. You can select tones from six categories, each with three variations.
47 Performing with the Keyboard Performing ■ Making Changes to the Tones (Tone Modify) You can set the following four elements to make changes to the synth part tone. This setting is stored in the registrations. fig.04-22(4Knobs) ■ Applying Effects to the Sound (MULTI EFFECTS) The VR-760 allows you to apply “multi-effects” to sounds.
48 Performing with the Keyboard ■ Adding Expression to the Sound “Active Expression” You can use the expression pedal to add expression to the synth part sound. This feature, called "Active Expression," includes control of two different functions, "FADE" and "TIMBRE.
49 Advanced Functions Using the Advanced Functions Using the D BEAM Controller to Produce Common Effects You can apply various effects to the sound only by moving your hand over the D Beam Controller on the VR-760 panel. fig.05-01(DBeamObPanel) 1. Press any of the three buttons in the D BEAM CONTROLLER section.
50 Using the Advanced Functions ■ Adjusting the Sensitivity of the D Beam Controller Caution When the VR-760 automatically calibrates the sensitivity of the D Beam controller, make sure no object is placed on the D Beam, and avoid having your hands near it.
51 Using the Advanced Functions Advanced Functions Dividing the Keyboard (Split) You can divide the keyboard into two key ranges and assign a different part to the left and right hand. Dividing the keyboard in two this way is referred to as a “split,” and the point at which the keyboard is split is called the split point.
52 Using the Advanced Functions Playing Rhythm (RHYTHM) The VR-760 includes a simple rhythm part that can be used for playing drum patterns in a variety of musical styles. The rhythm part can also be used in place of a metronome when practicing, or can be used for inspiring creativity.
53 Using the Advanced Functions Advanced Functions fig.05-07(SousaPanel) 1. Press the RHYTHM [ON] button. The Rhythm begins playing. The following display is appear. fig.05-08(RythmScreen) 2. Adjust the volume of the Rhythm with the [RHYTHM VOLUME] knob.
54 Using the Advanced Functions Saving Settings to Registrations You can store organ, piano, and synth tones, part combinations, and other panel settings as a REGISTRATION. With your favorite settings stored in the form of registrations, you can then call up desired settings simply by pressing the appropriate REGISTRATION button.
55 Using the Advanced Functions Advanced Functions 3. Press the [ENTER] button. The save begins, and a message appears in the display. In the above example, the current settings are stored in Registration 23. If you do not want to store the settings in a registration, press the [EXIT] button.
56 Using the Advanced Functions Saving to the Memory Card With the VR-760, you can take all of the content in the registration and the system settings and save them as a single file to a memory card (CompactFlash).
57 Using the Advanced Functions Advanced Functions ■ Formatting the Memory Card for the VR-760 (Format) This function initializes (formats) a memory card so that VR-760 data can be saved to it. Before a new memory card or a memory card used on another device can be used on the VR-760, it must be formatted on the VR-760.
58 Using the Advanced Functions ■ Saving Data to Memory Card (Save File) 1. Hold down the [EDIT] button, and press the REGISTRATION [7] (UTILITY) button. The Edit’s “UTILITY” screen is displayed. 2. Press CURSOR [ ] button to display the following screen.
59 Using the Advanced Functions Advanced Functions ■ Loading a File from Memory Card into the VR-760 (Load File) 1. Hold down the [EDIT] button, and press the REGISTRATION [7] (UTILITY) button. The Edit’s “UTILITY” screen is displayed. 2. Press CURSOR [ ] button to display the following screen.
60 Using the Advanced Functions 5. Press the [ENTER] button. A screen like the one shown below appears. fig.06-11(NewName) The cursor appears at the file name to the lower left of the display. 6. Rename file. Move the cursor by using the CURSOR [ ][ ] buttons to the location where you wish to input a character.
61 Using the Advanced Functions Advanced Functions Controlling an External Video Device (V-LINK) With the VR-760 connected to an external video device such as the Edirol DV-7PR, you can then use the VR-760 to control the images (V-LINK function).
62 Using the Advanced Functions ■ How to Use the V-LINK Function 1. Turn on the power to the DV-7PR, and start up Presenter. 2. Press the [V-LINK] button so its indicator lights up. The message “Video link system is ON” appears on the VR-760’s screen, indicating that the video control mode is enabled.
63 EDIT Detailed Settings for Each Function (EDIT) Edit mode allows you to get the most out of the VR-760’s functions by making more detailed settings.
64 Detailed Settings for Each Function (EDIT) REGISTRATION ORGAN These are the settings stored to individual registrations that affect the organ part. REGISTRATION PIANO These are the settings stored to individual registrations that affect the piano part.
65 Detailed Settings for Each Function (EDIT) EDIT Basic Procedure 1. Hold down the [EDIT] button, and press the REGISTRATION [1]–[7] button. 2. Press CURSOR [ ][ ] button to select the parameter. 3. Press the [INC] and [DEC] buttons to change the values.
66 Detailed Settings for Each Function (EDIT) Assigning Functions to Control Pedal Ctrl Pdl Assign This setting determines the function of the pedal switches or expression pedals (such as the optional EV-7) that are connected to the CONTROL PEDAL jacks on the rear panel.
67 Detailed Settings for Each Function (EDIT) EDIT Adjusting the Sensitivity of the D Beam D Beam Sens (0–127) You can Adjust the Sensitivity of the D Beam. The value is a range of 0–127. Sensitivity increases as the value is raised. You can also have the D Beam sensitivity adjusted automatically (p.
68 Detailed Settings for Each Function (EDIT) Switching the MIDI Data Transmitted MIDI Tx Mode (INTERNAL/EXTERNAL/BOTH) You can change the type of MIDI data to be transmitted, depending on whether you are recording to an external MIDI sequencer, or controlling an external MIDI device.
69 Detailed Settings for Each Function (EDIT) EDIT Changing the Tone Wheel Brake Message TWBrk Ctrl Msg (1 – 8) This determines the number of the message to be used for transmitting and receiving the status of the wheel brake effect produced using the control pedal.
70 Detailed Settings for Each Function (EDIT) Determining the MIDI Output Key Range in Split Play External Part Assign (UPPER/LOWER/BOTH) This sets the key range for which Note messages are output from MIDI OUT when Split Play is used.
71 Detailed Settings for Each Function (EDIT) EDIT Organ Settings for Registrations (REGISTRATION ORGAN) Organ Volume (0–127) This changes the volume level of the organ part. This setting performs the same function as the panel [ORGAN VOLUME] knob. Organ Octave Shift (-2–+2) This changes the pitch of the organ part in octave units.
72 Detailed Settings for Each Function (EDIT) Adjusting the Amount of Overdrive Overdrive Level (0–127) This adjusts the amount of the overdrive (distortion) effect applied.
73 Detailed Settings for Each Function (EDIT) EDIT Piano Settings for Registrations (REGISTRATION PIANO) Piano Volume (0–127) This changes the volume level of the piano part. This setting performs the same function as the panel [PIANO VOLUME] knob. Piano Oct Shift (-2–+2) This changes the pitch of the piano part in octave units.
74 Detailed Settings for Each Function (EDIT) Wah Resonance (0–127) This sets the strength of the effect when wah is selected for MFX. The change becomes easier to detect as the value is raised. Phaser Reso (0–127) This sets the strength of the effect when phaser is selected for MFX.
75 Detailed Settings for Each Function (EDIT) EDIT Creating Smooth Pitch Changes (Portamento) Portamento is a function that causes the pitch to change smoothly from one note to the next note played. With the MONO/POLY parameter set to MONO, portamento is especially effective when simulating playing techniques such as a violin glissandos.
76 Detailed Settings for Each Function (EDIT) Convenient Functions (UTILITY) ■ Checking the Installed Wave Expansion Boards (SRX Info) Check to confirm that the installed boards are being recognized correctly. 1. Hold down the [EDIT] button, and press the REGISTRATION [7] (UTILITY) button.
77 Detailed Settings for Each Function (EDIT) EDIT Bulk Dump Temp Transmit the contents of the selected Registration. 1. Hold down the [EDIT] button, and press the REGISTRATION [7] (UTILITY) button. The Edit’s “UTILITY” screen is displayed. 2. Press CURSOR [ ] button to display the following screen.
78 Detailed Settings for Each Function (EDIT) Loading Back Data That’s Been Saved on an External Sequencer 1. Make sure that the power of the VR-760 and your sequencer is off. Turn off the power of the VR-760 and the other device before making connections.
79 Connecting MIDI Device Connecting External MIDI Devices About MIDI MIDI (Musical Instrument Digital Interface) is a worldwide standard for exchanging music data among electronic musical instruments and computers. MIDI does not send audio signals, but instead converts performance data and commands into digital data for transmission.
80 Connecting External MIDI Devices ■ Recording the Performance Use the following procedure when recording to an external sequencer. 1. Turn on the external sequencer’s Thru function. For details, refer to the following section “About Local Control.
81 Connecting External MIDI Devices Connecting MIDI Device Playing the VR-760’s Internal Sound Generator from an External MIDI Device ■ Making Connections fig.07-03(Connections) To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.
82 Connecting External MIDI Devices Switching Tones The MIDI messages transmitted by the external MIDI device will be received by the VR-760 to select Tones as shown in the following table. The following shows a breakdown of the different Program Change numbers.
83 Wave Expansion Boards Installing the Wave Expansion Board Up to two optional Wave Expansion Boards (SRX Series) can be installed in the VR-760. Wave Expansion Boards store Wave data, Patches, and Rhythm Sets, and by equipping the VR-760 with these boards, you can greatly expand your sound palette.
84 Installing the Wave Expansion Board 3. Insert the Wave Expansion Board connector into a connector for an SRX Series slot (SRX A or SRX B), while simultaneously inserting the board holders into the holes in the Wave Expansion Board.
85 Installing the Wave Expansion Board Wave Expansion Boards Installation de la carte d’extension Wave (French language for Canadian Safety Standard) Vous pouvez installer jusqu’à 2 cartes d’extension optionnelles dans le VR-760.
86 Installing the Wave Expansion Board 3. Insérer le connecteur de la carte dans un des créneaux pour la série SRX (SRX A, SRX B) tout en enfonçant les supports à carte dans les trous de celle-ci.
87 Appendices Troubleshooting If the VR-760 does not function in the way you expect, first check the following points. If this does not resolve the problem, consult your dealer or a nearby Roland Service Station. * If certain messages appear in the display during operation, please refer to “Messages and Error Messages” (p.
88 Troubleshooting Clicking is audible when the keys are pressed/released With tone wheel organs, noises called “clicks” are generated when the keys are pressed and released.
89 Troubleshooting Appendices Hold pedal and control pedal functions are reversed The control pedal polarity is reversed. With certain pedals, the action performed when you press or release the pedal may be reversed. In such instances, switch the Damper Polarity or CtlPdl Polarity to correct the polarity.
90 Messages and Error Messages This section lists the messages (error messages) that the VR-760 produces and explains the meaning of each message, giving you to appropriate action to take. Message Meaning Action BULK: Check Sum Error The checksum value of a system exclusive message was incorrect.
91 Appendices Effects/Parameter List The multi-effects feature 40 different kinds of effects. Some of the effects consist of two different effects connected in series or in parallel.
92 Effects/Parameter List 6: ENHANCER Controls the overtone structure of the high frequencies, adding sparkle and tightness to the sound. 7: AUTO WAH Cyclically controls a filter to create cyclic change in timbre. 8: ROTARY The Rotary effect simulates the sound of the rotary speakers often used with the electric organs of the past.
93 Effects/Parameter List Appendices 13: SPACE-D This is a multiple chorus that applies two-phase modulation in stereo. It gives no impression of modulation, but produces a transparent chorus effect. 14: STEREO CHORUS This is a stereo chorus. A filter is provided so that you can adjust the timbre of the chorus sound.
94 Effects/Parameter List 18: MOD DELAY (Modulation Delay) Adds modulation to the delayed sound, producing an effect similar to a flanger. When Mode is NORMAL: fig.02-018am When Mode is CROSS: fig.02-018bm 19: TRI TAP DLY (Triple Tap Delay) Produces three delay sounds; center, left and right.
95 Effects/Parameter List Appendices 21: TIME CTRL DLY (Time Control Delay) This effect allows you to use the MFX [CONTROL] knob on the Synth section to control the delay time and pitch in realtime. Lengthening the delay will lower the pitch, and shortening it will raise the pitch.
96 Effects/Parameter List 25: GATED REVERB This is a special type of reverb in which the reverberant sound is cut off before its natural length. 26: OD -> CHORUS (Overdrive -> Chorus) fig.02-026m 27: OD -> FLANGER (Overdrive -> Flanger) fig.
97 Effects/Parameter List Appendices 30: DIST -> FLANGER (Distortion -> Flanger) The parameters are essentially the same as in “27: OD -> FLANGER,” with the exception of the following two.
98 Effects/Parameter List 36: FLANGER -> DELAY fig.02-036m 37: CHORUS -> FLANGR (Chorus -> Flanger) fig.02-037m 38: CHORUS/DELAY The parameters are the same as for “35: CHORUS -> DELAY.” However, the Delay Balance parameter adjusts the volume balance between the direct sound and the delay sound.
99 Appendices 28 29 31 33 35 30 32 34 39 40 41 43 45 47 42 44 46 36 38 37 51 52 53 48 50 49 C2 C3 Note No. 27 Tone List Piano Tone [Acoustic Piano] No. PatchName 1 ConcertGrand 2 Classical Pf 3 European Pf [Electric Piano] No. PatchName 1 Rhodes Mark 1 2 Rhodes Mark 2 3 Dyno Rhodes [Other Piano] No.
100 Settings You Can Alter and Store Settings Stored to the System • Master Tune • Key Transpose • Key Touch • Damper Polarity • Organ Damper SW • Synth Damper SW • Piano Expression SW .
101 Appendices Shortcut List [EDIT] + Bender Bender Assign screen [EDIT] + Aftertouch Aftertouch Assign screen [EDIT] + Damper Organ Damper SW screen [EDIT] + Expression Piano Exp SW screen [EDIT] + CTRL Pedal Control Pedal Assign screen [EDIT] + [SPLIT] Split screen (Same as pressing only the [SPLIT] button.
102 MIDI Implementation Model: VR-760 (Performance Keyboard) Date: Nov. 1, 2002 Version: 1.00 1. Receive data ■ Channel Voice Messages ● Note off Status 2nd byte 3rd byte 8nH kkH vvH 9nH kkH 00H n = MIDI channel number: 0H - FH (ch.
103 MIDI Implementation Appendices ❍ Soft (Controller number 67) Status 2nd byte 3rd byte BnH 43H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON * Only received by the Piano Part.
104 MIDI Implementation ❍ RPN MSB/LSB (Controller number 100, 101) Status 2nd byte 3rd byte BnH 65H mmH BnH 64H llH n = MIDI channel number: 0H - FH (ch.
105 MIDI Implementation Appendices ■ System Realtime Message ● Timing Clock Status F8H * This message will be received if the Clock Source parameter (Edit:System Basic:Clock Source) is MIDI. ● Active Sensing Status FEH *W hen Active Sensing is received, the unit will begin monitoring the intervals of all further messages.
106 MIDI Implementation ❍ Data set 1 DT1 This is the message that actually performs data transmission, and is used when you wish to transmit the data.
107 MIDI Implementation Appendices ❍ General Purpose Controller 3 (Controller number 18) Status 2nd byte 3rd byte BnH 12H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Control value: 00H - 7FH (0 - 127) * Depending on the Control Message settings (Edit: System MIDI: Control Message).
108 MIDI Implementation ● Active Sensing Status FEH * This message is transmitted at intervals of approximately 250 msec. ■ System Exclusive Messages Universal Non-realtime System Exclusive Message” and Data Set 1 (DT1) are the only System Exclusive messages transmitted by the VR-760.
109 MIDI Implementation Appendices 3. Parameter Address Map * Transmission of “#” marked address is divided to some packets. For example, ABH in hexadecimal notation will be divided to 0AH and 0BH, and is sent/received in this order.
110 MIDI Implementation | 00 00 00 30 | Total Size | +————————————————————————————————————————————————.
111 MIDI Implementation Appendices ■ Decimal and Hexadecimal Table (An “H” is appended to the end of numbers in hexadecimal notation.) In MIDI documentation, data values and addresses/sizes of Exclusive messages, etc. are expressed as hexadecimal values for each 7 bits.
112 MIDI Implementation ■ Example of an Exclusive Message and Calculating a Checksum Roland Exclusive messages (RQ1, DT1) are transmitted with a checksum at the end (before F7) to make sure that the message was correctly received. The value of the checksum is determined by the address and data (or size) of the transmitted Exclusive message.
113 MIDI Implementation Appendices Function... Basic Channel Mode Note Number : Velocity After Touch Pitch Bend Control Change Program Change System Exclusive System Common System Real Time Aux Messag.
114 Specifications VR-760: Performance Keyboard * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
115 Index A A.PIANO button ........................................................... 43 AC Inlet ........................................................................... 15 ACTIVE EXPRESSION ........................................... 14, 48 Aftertouch .
116 Master Tune ............................................................. 22, 65 MASTER VOLUME knob ...................................... 12, 20 Memory Card ............................................................. 6, 56 Format ..............
117 ROTARY SLW/FST ................................................ 66, 70 Rotary Sound ................................................................. 42 ROTARY SPEED (Ctrl Pdl Assign) ............................. 66 ROTARY SPEED button ..........
Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. As of April 1, 2003 (Roland) ARGENTINA Instrumentos Musicales S.
2 To resize thickness, move all items on the front cover CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
Thank you, and congratulations on your choice of the Roland Performance Keyboard VR-760. 201b 202 Copyright © 2003 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Roland VR-760 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Roland VR-760 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Roland VR-760 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Roland VR-760 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Roland VR-760, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Roland VR-760.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Roland VR-760. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Roland VR-760 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
