Manuale d’uso / di manutenzione del prodotto HPi-7S del fabbricante Roland
Vai alla pagina of 136
D I C 6 1 5 スミ 07-09-2N 04679934 * 0 4 6 7 9 9 3 4 - 0 2 *.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (p. 6), and “Important Notes” (p. 9). These sections provide important information concerning the proper operation of the unit.
4 Prov T o Learn What Kinds of Songs are Included ➜ p. 41 The HPi-7S features 183 internal songs in a wide range of musical genres, from piano practice songs to pops.
5 Provides Support for Y our Lessons at Home! Perform Using the Metronome ➜ p. 63 The HPi-7S includes a metronome function. Y ou can adjust the metronome volume le vel and change the tones used for the metronome sound. Practice at Different T empos ➜ p.
6 USING THE UNIT SAFELY Do not disassemble or modify 002a Do not disassemble or modify this device. ...................................................................................... Do not repair or replace parts 003 Never attempt to repair this device or replace parts.
7 USING THE UNIT SAFELY Turn off the power if an abnormality or malfunction occurs 012a If any of the following should occur, immediately turn off the power, disconnect the power cord from the AC outlet, and contact your dealer or a service center to have the device serviced.
8 USING THE UNIT SAFELY Unplug the power cord from the AC outlet before cleaning 109a Before you clean the device, turn off the power and unplug the power cord from the AC outlet (p. 17). ...............................................................
9 Important Notes In addition to the “USING THE UNIT SAFELY” listed on page 6–8, please observe the following cautions. Power Supply 301 • Do not connect this device to the same electrical outlet as an inverter-controlled device such as a refrigerator, microwave oven, or air conditioner, or a device that contains an electric motor.
10 Important Notes 562 • Some connection cables contain a resistor. Do not connect such cables to this device. Doing so may make the volume extremely low or inaudible.
11 Introduction Thank you, and congratulations on your choice of the Roland Digital Piano HPi-7S. In order to enjoy reliable performance of your new keyboard for many years to come, please take the time to read through this manual in its entirety.
12 Contents USING THE UNIT SAFELY ........................................................................ 6 Important Notes..................................................................................... 9 Introduction ..........................
13 Contents Listening to the Songs .......................................................................... 41 Listening to the Internal Songs............................................................................................ 41 Playing Songs Consecutively (All Song Play) .
14 Contents Copying Songs on USB Memory to Favorites ...................................................................... 84 Copying Songs Saved in Favorites to USB memory ..................................................... 85 Convenient Functions .
15 Contents Correcting Timing Discrepancies (Quantize) ............................................................ 101 Deleting Measures (Delete) .................................................................................... 102 Inserting Blank Measures (Insert) .
16 Before You Begin Playing ■ Attaching the Music Rest The music rest of the HPi-7S contains a liquid crystal display screen. Use the following procedure, and handle the music rest with care. 1. Secure the music rest in place by turning the included screws (at two points).
17 Before You Begin Playing ■ Connecting the Power Cord 1. Make sure that the [Power] switch located at the left side of the front panel is off (in the upward position). 2. Turn the [Volume] knob all the way toward the left to minimize the volume. 3.
18 Before You Begin Playing Once the connections have been completed (p. 17), turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
19 Before You Begin Playing Some Notes on Using Headphones • To avoid damaging or severing the headphone cord, be sure to handle the headphones by holding the phones themselves, and grasping the plug and not the cord when pulling the headphone plug.
20 Before You Begin Playing You can adjust the brightness of the HPi-7S’s display. 1. To adjust the contrast of the screen, turn the [Contrast] knob located at the back of the music rest. fig.Contrast-e Some Notes on Using the LCD Screen • Never remove the liquid crystal display cover at the back of the music rest.
21 Before You Begin Playing You can play back audio CDs and CD-ROMs containing saved SMF music files. You can also play songs on VIMA CD-ROMs (VIMA TUNES) sold by Roland. Precautions Concerning Use of the CD • You cannot play back CD-R/RW discs to which audio tracks have been added or CDs containing both audio tracks and data (CD Extra).
22 Panel Descriptions Front Panel 1. [Power] switch Pressed to switch the power on and off (p. 18). 2. [Volume] knob Adjusts the overall volume of the HPi-7S (p. 18). If headphones are connected, this adjusts the headphone volume (p. 18). 3. [Brilliance] knob Adjusts the brightness of the sound (p.
23 Panel Descriptions 21. Track buttons (R/Rhythm, 1/User, 2/Accomp, 3/Left, 4/Right) Used to play back or record each track of a song (p. 59, p. 73 – p. 77). 22. [ (Reset)] button Resets the song playback-start location to the beginning of the song.
24 Panel Descriptions Rear Panel 1. LCD Out connector Connect the LCD cord of the music rest to this connector (p. 16). HPi-7S’s Bottom Panel (Rear Left Side) 2. Input jacks These jacks can be connected to another sound generating device or an audio device, so that the sound of that device will be output from the HPi-7S’s speakers (p.
25 Basic Operation and the Main Screen The HPi-7S is operated mainly by pressing the button for the function you want to use, then using the cursor buttons and [ ] [ ] [-][+]buttons in the center of the front panel while viewing the screen.
26 Basic Operation and the Main Screen ■ Notation Screen fig.d-Score-1-e_50 The Notation screen, like the one shown to the right, is displayed when you turn on the power to the HPi-7S. You can display notations not only for the internal songs, but also for SMF music files and performances recorded with the HPi-7S as well.
27 Basic Operation and the Main Screen fig.ScoreOption2-e * If you have selected a part that contains no performance data, the notation will not show any notes. To change the part that is displayed, refer to “Changing the Notation Screen Settings” (p.
28 Basic Operation and the Main Screen ■ List Screen fig.d-ToneSelect-e_50 This type of list screen will appear when you select songs, or tones. In this screen, use the cursor buttons to select the desired item. ■ Detailed Settings Screen fig.d-PianoSetting1-e_50 Detailed settings for functions are made in a screen similar to this.
29 Basic Operation and the Main Screen The pedals have the following functions, and are used mainly for piano performance. fig.pedal-e Damper Pedal (right pedal) Use this pedal to sustain the sound. While this pedal is pressed, notes will be sustained even after you take your fingers off the keys.
30 Try Out the HPi-7S’s Lesson Functions! 1. Press the [Wonderland] button. After the opening screen is displayed, the “Wonderland” screen, like the one below, appears in the display.
31 Try Out the HPi-7S’s Lesson Functions! 2. Press the cursor buttons to select the item you want to play, then press the [ ] button. You can do the following in Wonderland. 3. Try playing as you view the screen. 4. When you have finished with Wonderland, press the [Wonderland] button.
32 Try Out the HPi-7S’s Lesson Functions! 1. Press the [ (Lesson)] button. The Menu screen appears. 2. Press the cursor buttons to select <DoReMi Course>, then press the [ ] button.
33 Try Out the HPi-7S’s Lesson Functions! ■ DoReMi (Pitch Training) fig.d-DoReMi-1-e_50 Remember the key and note positions and the note names. Press the [ ] button to start the game. In this game, questions will appear in the left side of the screen.
34 Try Out the HPi-7S’s Lesson Functions! 1. Press the [ (Twin Piano)] button. The Twin Piano function switches on. fig.d-TwinPiano-e_50 The following occurs with Twin Piano set to ON. • The keyboard is divided into two sections which can be played with “Middle C” placed at the center of each section.
35 Try Out the HPi-7S’s Lesson Functions! Cancelling Twin Piano Function Use the following procedures to cancel Twin Piano function. Method 1: Press the [ (Twin Piano)] button. Method 2: Press the One Touch [ ] button. → p. 50 Method 3: Cancel the “Split” function.
36 Try Out the HPi-7S’s Lesson Functions! ■ Changing the Way in Which the Sound is Heard (Twin Piano Mode) You can choose one of two ways in which the sound will be produced. 1. Press the [Function] button. 2. Press the cursor buttons to select <Twin Piano Mode>, then press the [ ] button.
37 Try Out the HPi-7S’s Lesson Functions! At this point, pressing [ ] advances you to the next screen, and pressing [ ] returns the previous screen to the display. Starting the Visual Lesson Function When you want to perform with the tone changed, select the tone before starting Visual Lesson.
38 Try Out the HPi-7S’s Lesson Functions! Selecting the Song 4. Press the cursor buttons to select the song you want to practice. fig.d-VisualLesson2-e_50 You can audition the sound by pressing the [ (Play/Stop)] button. You can adjust the tempo by pressing the Tempo [Slow] [Fast] buttons.
39 Try Out the HPi-7S’s Lesson Functions! Checking the Performance 8. Press the [ ] button. The results of your performance is shown in the musical notation in the Check screen, like that below. fig.d-VisualLesson-2-e Displaying the Menus 9. Press the [ ] button.
40 Try Out the HPi-7S’s Lesson Functions! 10. Press the cursor buttons to select the menu, then press the [ ] button. If you want to practice the same song again, select “Try Again.” If you want to practice another song, select “Select Song.” If you want to practice with another course, select “Select Course.
41 Listening to the Songs Selecting the Song 1. Press the [ (Song)] button. The “song selection” screen appears. fig.SongSelect-e 2. Press the cursor left or right button to select the song genre. 3. Press the cursor up or down button to select the song you want to listen to from the song list.
42 Listening to the Songs Stopping Playback 5. Press the [ (Play/Stop)] button. The [ (Play/Stop)] button’s indicator goes off, and playback of the song stops. Playback will stop automatically when it reaches the end of the song. Press the [ (Reset)] button to return to the beginning of the song.
43 Listening to the Songs ■ Playing Songs Consecutively (All Song Play) You can play back the internal songs and songs in USB memory continuously. fig.panel-AllSong-e 1. Hold down the [ (Song)] button and press the [ (Play/Stop)] button. fig.d-AllSongPlay-e_50 2.
44 Listening to the Songs 1. Connect the optional USB memory or floppy disks drive to the External Memory connector. If playing back commercially available music files or songs saved on a floppy disk, insert the floppy disk in the floppy disk drive. Selecting the Song 2.
45 Listening to the Songs 1. Press the [ (Song)] button. The “song selection” screen appears. fig.d-SongSelect-e_50 2. Press the cursor left or right button to select the song genre. 3. Press the cursor up or down button to select the song you want to register.
46 Listening to the Songs 5. Press the cursor right button to select <OK>, then press the [ ] button. The selected song is registered to “Favorites.” Now you can select the registered song by selecting “Favorites” for the genre in the “Song Selection” screen.
47 Listening to the Songs 1. Connect your separately purchased USB memory or commercially available CD drive to the external memory connector. If you want to play back a music CD, insert the CD in your CD drive. Selecting the Song 2. Press the [ (Song)] button.
48 Listening to the Songs Playing Back 4. Press the [ (Play/Stop)] button. The song will begin playing. Stopping Playback 5. Press the [ (Play/Stop)] button once more. NOTE This instrument is incapable of displaying the notation for the songs on a music CD.
49 Listening to the Songs ■ Adjusting the Volume of an Audio File or Music CD You can adjust the playback volume of an audio file or music CD. 1. Press the [Function] button. The “Functions” screen appears. 2. Press the cursor buttons to select <Audio Volume>, then press the [ ] button.
50 Adding Variety to Your Performances 1. Press the One Touch [ ] button. The Tone [Piano] button’s indicator will light. A screen stating that the optimal settings for piano performances have been selected is displayed for several seconds, followed by a “Notation screen” like the following.
51 Adding Variety to Your Performances 1. Press any one of the Tone buttons to select a tone group. When you press a Tone button, the button’s indicator will light. The “tone selection” screen appears. 2. Press the cursor buttons to select the tone to perform with.
52 Adding Variety to Your Performances 1. Press the Tone [Others] button. 2. Use the cursor buttons to select a rhythm set such as <DR STANDARD> or <SOUND EFFECT> (SFX set). Drum set names are indicated by initial “DR.” Each note of the keyboard will play a different sound.
53 Adding Variety to Your Performances 1. Press the [Key Touch] button. Each time you press the [Key Touch] button, the button’s indicator changes color while the touch is switched. fig.d-keytouch-e Adjusting the Keyboard Touch (Key Touch) You can adjust the touch (playing feel) of the keyboard.
54 Adding Variety to Your Performances ■ Adding Reverberation to the Sound (Reverb) By applying the reverb effect you can produce a pleasant reverberation, making it sound as though you were performing in a concert hall. fig.d-Effect2-e 1. Press the [Reverb] button.
55 Adding Variety to Your Performances ■ Adjusting the Brightness of the Sound (Brilliance) You can adjust the brightness of the sound. 1. Turn the [Brilliance] knob to adjust the brightness of the sound. Turning the knob toward the right will make the sound brighter, and turning it toward the left will make the sound more mellow.
56 Adding Variety to Your Performances 1. Simultaneously press two of the Tone buttons. Both of the button indicators will light. Of the two buttons, the sound of the left button will be “Tone 1,” and the sound of the right button will be “Tone 2.
57 Adding Variety to Your Performances fig.splitpoint-e The split point key is included in the left-hand keyboard area. 1. Press the [Split] button. Split performance is enabled. The tone selected before the performance is set as the “Right-hand Tone”, the “Left-hand Tone” is selected automatically.
58 Adding Variety to Your Performances Cancelling the Split Performance Use the following procedure to cancel the split. 1. Press the [Split] button, getting its indicator to go dark Enabling Split Pe.
59 Practicing A music file for piano lessons may be assigned to the five Track buttons as shown below. fig.5trackButton-e By using these Track buttons, you can mute the sound of specific parts. This is referred to as “mute.” Preparing to Play 1. Select the song you want to play.
60 Practicing Stopping the song 5. Press the [ (Play/Stop)] button. The indicator for the [ (Play/Stop)] button goes out, and playback of the song stops. Playback will stop automatically when it reaches the end of the song. Press the [ (Reset)] button to return to the beginning of the song.
61 Practicing 1. Press the [Function] button. The Functions screen appears. 2. Press the cursor buttons to select <Balance>, then press the [ ] button. fig.d-Balance-e_50 3. Press the cursor left or right button to adjust he volume balance between accompaniment and keyboard.
62 Practicing 1. Press the Tempo [Slow] [Fast] buttons to adjust the tempo. The tempo can be adjusted in a range of =10–500. ■ Playing Back at a Fixed Tempo (Tempo Mute) The tempo in some songs may change, speeding up or slowing down, when the song is in progress.
63 Practicing 1. Press the [ (Metronome)] button. The button’s indicator will blink according to the time signature (Beat), and the metronome will sound. To stop the metronome, press the [ (Metronome)] button, getting its indicator to go dark. fig.Metronome-e 2.
64 Practicing 3. Press the cursor up or down button to change the value. 1. Press the [Count/Marker] button. The “Count” screen appears. The “Count” screen has two pages.
65 Practicing fig.d-Count-e_50 2. Press the cursor left or right button to select the setting you want to make. 3. Press the cursor up or down button to change the value.
66 Practicing Before you begin, select the song in which you want to assign markers (p. 41, p. 44). Accessing the Marker Screen 1. Press the [Count/Marker] button to display the “Count” screen. 2. Press the [ ] button. The “Marker” screen appears.
67 Practicing Moving an Assigned Marker After adding markers to a song, you can then move to the location where Marker A is set by holding down the cursor left button and pressing either the [ (Bwd)] or [ (Fwd)] button. To adjust the location of marker B, hold down the cursor right button and press the [ (Bwd)] or [ (Fwd) button.
68 Practicing 1. Press the [Transpose] button. The “Transpose” screen appears. fig.d-Transpose-e_50 The available transposition range varies with the type of song data used. 2. Press the [ ] button to switch the link on or off. When set to Link <On>, the values for the keyboard and the song data are the same.
69 Recording Your Performance The HPi-7S lets you record your own performances. A recorded performance can be played back to hear your own playing, or to add additional parts. The following types of recording can be done using the HPi-7S. If a screen like the following is displayed If you record a new song after already having recorded, edited (p.
70 Recording Your Performance Making the Recording Settings (Choosing “New Song”) 1. Press the [ (Song)] button. fig.Rec-NewSong-e 2. Press the cursor up button one or more times to return to the first song, then press the cursor up button once more to select <New Song>.
71 Recording Your Performance 3. Press the [ (Rec)] button. The indicators of all Track buttons will blink, and the HPi-7S enters recording-standby mode. To cancel recording, press the [ (Rec)] button once more and watch the indicator goes out. Starting the Recording 4.
72 Recording Your Performance 1. Record the performance (p. 70, p. 73, p. 77). 2. Press the [ (Song)] button to open the “song selection” screen. 3. Hold down the [ (Song)] button and press the [ ] button. The following screen appears. fig.d-RegistFavorites-e_50 4.
73 Recording Your Performance Here, record your right-hand performance along with the song accompaniment. Settings for Performances 1. Press the [ (Song)] button to select the song you want to play. → “Listening to the Internal Songs” (p. 41) → “Listening to Music Files or a Song that was Saved on USB Memory” (p.
74 Recording Your Performance Selecting the Track to Record 5. Press the track button for the track that you want to record (i.e., the track that you want to play yourself). The indicator of the button you pressed will blink, and the HPi-7S enters recording- standby mode.
75 Recording Your Performance 1. Use the [ (Bwd)] or [ (Fwd)] button to move to the measure that you want to re-record. 2. Press the [ (Rec)] button. A screen like the one shown below appears.
76 Recording Your Performance Method 1: After recording a song, press the [ (Song)] button and select another song in the “song selection” screen. Method 2: Hold down the [ (Song)] button and press the [ (Rec)] button. When either of these operations are performed, a display like the following will appear.
77 Recording Your Performance Recording the First Track 1. Record your performance as described in “Recording a New Song” (p. 70). Recording the Second and Subsequent Tracks 2. Select and record additional tracks one at a time as described in “Re- recording” (p.
78 Saving the Performance ■ Connecting an USB Memory 1. Connect the USB Memory to the External Memory connector. fig.ConnectUSB1-e ■ Rotating the External Memory Connector Holder The External Memory connector holder rotates 90 degrees left and right.
79 Saving the Performance 1. Connect the USB Memory to the External Memory connector. 2. Press the [Function] button. The Functions screen appears. 3. Press the cursor buttons to select <File>, then press the [ ] button. The “File” screen appears.
80 Saving the Performance Preparations for Saving a Song When saving to USB Memory, connect the USB memory to the external memory connector. 1. Press the [Function] button. The Functions screen appears. 2. Press the cursor buttons to select <File>, then press the [ ] button.
81 Saving the Performance Determining the Save Destination 4. Press the cursor up or down button to change the setting of the Save Destination. fig.d-SaveDest-e_50 5.
82 Saving the Performance Selecting the Save Number 7. Press the cursor right button one or more times to select <Save Destination>. fig.RenameSong4-e 8. Press the cursor up or down button to select the save-destination number. If a song name is displayed with a number, a song is already saved to that number.
83 Saving the Performance To delete a song on an USB memory, first connect the USB memory to the external memory connector. 1. Press the [Function] button. The Functions screen appears. 2. Press the cursor buttons to select <File>, then press the [ ] button.
84 Saving the Performance 1. Connect the USB memory with the song to be copied to the External Memory connector. 2. Press the [Function] button. The Functions screen appears. 3. Press the cursor buttons to select <File>, then press the [ ] button.
85 Saving the Performance fig.FileCopy1-e Selecting the Copy Destination 8. Press the cursor left or right button to select Copy Destination. 9. Press the cursor up or down button to select the copy-destination number. If a number is displayed with a song name, a song is already saved to that number.
86 Convenient Functions Functions that Can be Selected Using the [Function] Button Here’s how you can easily make changes such as tuning the HPi-7S or changing the function of the pedals. ■ Making the Settings 1. Press the [Function] button. The Functions screen appears.
87 Convenient Functions ■ Setting the Tuning Curve (Stretch Tuning) Pianos are generally tuned so that the low range is flatter and the high range is sharper than equal tempered pitches. This method of tuning is unique to the piano, and is known as “Stretched Tuning.
88 Convenient Functions ■ Tuning to Other Instruments’ Pitches (Master Tuning) In situations such as when playing ensemble with other instruments, you can tune the HPi-7S’s standard pitch to the pitch of another instrument.
89 Convenient Functions You can adjust the depth of the reverb (p. 54) and chorus (p. 54). Refer to “Making the Settings” (p. 86) for instructions. Reverb This setting is valid when the [Reverb] button is turned on to apply an effect to the sound.
90 Convenient Functions ■ Changing How Grand Space is Applied (3D Mode) This specifies how 3D Sound Control will be applied. Refer to “Making the Settings” (p. 86) for instructions. You can adjust the volume at which an audio file or music CD will play.
91 Convenient Functions Sounds may become distorted as the Gain level increases. You can change the function of the left pedal and center pedal. Refer to “Making the Settings” (p. 86) for instructions. Left Pedal, Center Pedal High Mid Gain -12– +12 dB Adjusts the level of the mid- to high-frequency range.
92 Convenient Functions Screen Display Settings You can change the language that is displayed in the screen. Refer to “Making the Settings” (p. 86) for instructions. Germany, French, and Spanish are displayed for some functions. Other screens will be displayed in English.
93 Convenient Functions You can play demo that give you an idea of the HPi-7S’s various functions. 1. Hold down the Track [4/Right] button and press the [Wanderland] button. The Select a Demo screen appears. 2. Use the cursor buttons to select “Auto Demo.
94 Convenient Functions The HPi-7S lets you record 16 separate parts. Multitrack recording is a method of recording whereby you listen to what has previously been recorded while recording new parts on top of that material.
95 Convenient Functions Preventing a Part from Playing (Mute) 1. Press the cursor buttons to select the part you want to mute. 2. Press the [-] [+] button or ,cursor left button left and right to select Solo or Mute. fig.16TrackMute-e Press the [-] [+] button once more to cancel the solo or mute.
96 Convenient Functions With the normal setting, GS tones (sounds that are compatible with other GS instruments) will normally be used to play back song data. By changing this setting, you can play back song using HPi-7S-specific tones for certain portions of the data.
97 Convenient Functions Other Settings The HPi-7S features an internal storage area where you can save recorded performances and User image. This space is called the “User Memory.
98 Convenient Functions USB memory The memory backup settings can be restored to the original default condition. This operation is referred to as “Factory Reset.” When you execute “Factory Reset,” all settings you’ve stored up to that point will be cleared, and reset to their factory-set condition.
99 Convenient Functions You can change the parts shown in the notation screen, and how the notation is displayed. 1. Press the [ (Notation)] button one or more times to display a screen like the following.
100 Convenient Functions There are many ways you can edit performances recorded using the HPi-7S Track button (p. 59) or 16-track sequencer (p. 94). Basic Operation of the Editing Functions 1. Press the [ (Notation)] button one or more times to display a screen like the following.
101 Convenient Functions ■ Copying Measures (Copy) You can copy a portion of a performance to a different bar in the same Part or to a measure in another Part. This is handy when you’re composing a song that repeats a similar phrase. fig.e-copy-e Refer to “Basic Operation of the Editing Functions” (p.
102 Convenient Functions ■ Deleting Measures (Delete) You can delete a part of a performance measure by measure. When a portion of a performance is deleted, the rest of the performance is shifted up to fill the gap. Erasing measures in a specified passage is called “Delete.
103 Convenient Functions ■ Making Measures Blank (Erase) You can delete the performance data in a specified block of measures, turning them into blank measures without reducing the length of the song. This process is called “Erase.” fig.e-erase-e Refer to “Basic Operation of the Editing Functions” (p.
104 Convenient Functions ■ Modifying the Tone Changes in a Song (PC Edit) In some songs, the instrument sound changes during the course of the song (that is, the Tone changes in the middle of a Part). In such songs, an instruction to switch the Tone is inserted at the place where you want the sound to change.
105 Convenient Functions A screen like the one shown below appears. fig.d-BMPExport1-e_45 7. Press the cursor left or right button to select the item, then press the cursor up or down button to set the range to be saved. 8. Press the [ ] button. The notation is saved to the USB memory as image data in BMP (bitmap) format.
106 Connecting to Other Devices You can connect audio devices to play the sound of the HPi-7S through the speakers of your audio system, or to record your performance on a tape recorder or other recording device. Use phone plug audio cables (sold separately) to make connections.
107 Connecting to Other Devices By connecting an external MIDI device and exchanging performance data, you can control one device from the other. For instance, you can output sound from the other instrument or switch Tones on the other instrument.
108 Connecting to Other Devices Here’s how you can set the transmit channel and other MIDI-related settings. 1. Press the [Function] button. 2. Press the cursor buttons to select <MIDI>, then press the [ ] button. The “MIDI” screen has two pages.
109 Connecting to Other Devices → When a Roland MT series instrument is connected, it is not necessary to make the Local Off setting. The MT transmits a Local Off message when the power is turned on. If you turn on the power in the order of the HPi-7S → MT series, Local Off will be set automatically.
110 Connecting to Other Devices Normally, you don’t need to install a driver in order to connect the HPi-7S to your computer. However, if some problem occurs, or if the performance is poor, using the Roland original driver may solve the problem. Specify the USB driver you want to use, and then install the driver.
111 Connecting to Other Devices You can connect a computer monitor or other external display or a television to the HPi-7S, enabling you to display the Panel, Slide show or Notations on a larger screen.
112 Connecting to Other Devices ~ Image-related settings ~ This selects the content shown on the external display or the television connected to the HPi-7S.
113 Troubleshooting If you think there’s a problem, read this first. Case Cause/Remedy The power doesn’t come on Is the power cord connected and plugged in correctly? (p. 17) The button doesn’t work Is Panel Lock activated? (p. 98) Hold down the One Touch [ ] button and press the [Count/Marker] button to turn off the Panel Lock function.
114 Troubleshooting The tuning or pitch of the keyboard or song is off Have you set Transpose? (p. 68) Are the settings for the “Temperament” (p. 88) and “Stretch Tuning” (p. 87) correct? Is the setting for the “Master Tuning” correct? (p.
115 Troubleshooting Notation is not indicated properly in the display If you select a part that does not contain performance data, notes will not be displayed in the notation.
116 Error Message * External Media: USB memory and floppy disk etc. Press [ ] button, and you can cancel the error message. Indication Meaning Error: 1 You can only read the music file.
117 Tone List [Piano] Superior Grd Superior+Str NaturalGrand Natural Hps. MagicalPiano Superior+Pad Superior+Cho NaturalMello Natural Gnd2 MellowPiano2 DetunedPiano Honky-tonk Piano Str2 Piano Choir NaturalC.
118 Tone List GS Harpsi. Coupled Hps. Harpsi.w Harpsi.o Soft Clav. Celesta GS Glocken GS Music Box Vibraphone Vibe.w GS Marimba Marimba Xylophone Tubular-bell Church Bell Carillon GS Santur Organ 1 Organ 2 Pop Organ 1 Detuned Or.1 Detuned Or.2 GS ChurchOr1 GS ChurchOr2 Church Org.
119 Drum/SFX Set List * - - - - -: No sound. * [EXC]: will not sound simultaneously with other percussion instruments of the same number. 27 28 29 31 33 35 30 32 34 21 23 22 39 40 41 43 45 47 42 44 46.
120 Drum/SFX Set List * - - - - -: No sound. * [EXC]: will not sound simultaneously with other percussion instruments of the same number. 27 28 29 31 33 35 30 32 34 21 23 22 39 40 41 43 45 47 42 44 46.
121 Drum/SFX Set List * - - - - -: No sound. * [EXC]: will not sound simultaneously with other percussion instruments of the same number. 27 28 29 31 33 35 30 32 34 21 23 22 39 40 41 43 45 47 42 44 46.
122 Drum/SFX Set List * - - - - -: No sound. * [EXC]: will not sound simultaneously with other percussion instruments of the same number. 27 28 29 31 33 35 30 32 34 21 23 22 39 40 41 43 45 47 42 44 46.
123 Internal Song List * All rights reserved. Unauthorized use of this material for purposes other than private, personal enjoyment is a violation of applicable laws.
124 Internal Song List * Song with a “*” symbol appended to their name may not allow output of their notations as image data in BMP (bitmap) format.
125 Music Files That the HPi-7S Can Use What Are Music Files? Music files contains musical information such as how long the key for a corresponding pitch is played, the force applied to the key played, and other such information.
126 MIDI Implementation Chart Function... Basic Channel Mode Note Number : Velocity After Touch Pitch Bend Control Change Prog Change System Exclusive System Common System Real Time Aux Message Notes .
127 Main Specifications <Keyboard> Keyboard 88 keys (PHA II ivory feel Keyboard with Escapement) Touch Sensitivity Touch: 100 levels/Fixed Touch (level adjustable) Hammer Response: Off/1 to 10 K.
128 Main Specifications * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
129 Index Numerics 16 Track .................................................................... 94 16-track Sequencer ..................................................... 94 3D Mode ...................................................................
130 Index I Initialization Media .................................................................. 79 User Memory ........................................................ 97 Initialize User Memory ................................................ 97 Insert (Inserting Blank Measures) .
131 Index R Random Play .............................................................. 43 Rear Panel ................................................................. 24 Recommended Tone .................................................... 96 Recording 16 Track Recording .
132 Memo As of May 1, 2007 (ROLAND) Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below.
133 For EU Countries For China HPi-7S-e.book 133 ページ ２００７年８月２７日 月曜日 午後２時３９分.
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC. For EU Countries For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
D I C 6 1 5 スミ 07-09-2N 04679934 * 0 4 6 7 9 9 3 4 - 0 2 *.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Roland HPi-7S è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Roland HPi-7S - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Roland HPi-7S imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Roland HPi-7S ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Roland HPi-7S, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Roland HPi-7S.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Roland HPi-7S. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Roland HPi-7S insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
