Manuale d’uso / di manutenzione del prodotto CNP2000UCA del fabbricante Audiovox
Vai alla pagina of 17
PROTOCOL INTERFACE ADAPTER and XM DIRECT 2 TUNER CNP2000UCA "Compatible with Select Satellite Ready Car Stereos" Installation Guide.
Table of Contents Table of Contents 2 Introduction & Installation Overview 3 I nsta Ilation Basics ..... t. •••••••••••••••••••••••••••••.
Introduction & Installation Overview Thank you for purchasing the AUDIOVOX Protocol Interface Adapter for satellite radio ready car stereo head units. The Protocol Interface Adapter allows you to adapt a satellite radio ready car stereo to receive XM Satellite Radio service.
Installation Basics Note: Before installation, your PIA must have the proper radio model protocol downloaded. Please see an authorized dealer for programming of your PIA. When choosing a location to mount the components, care must be taken not to interfere with any of the vehicles existing systems.
2. If the vehicle has roof racks or skid ribs, it may be necessary to mount the antenna off-center. 3. If the vehicle roof does not provide sufficient metal surface area then the antenna can be mounted on the metal trunk lid at least 4" from the rear window.
2. For antenna mounting locations at the front or middle of the roof, the cable can be routed down along the door jam and into the car. In some cars, the cable may be brought into the vehicle through the grommet in the door jam which carries the power window and power lock wires.
Step 2 Connect the cable into the PIA. Plug the other end of the cable into the head unit (Cable sold separately). Read your cable installation manual for proper installation to your specific head unit. Step 3 Start your car and turn on your unit to confirm that the XM Direct system is properly connected.
StepS Return the car stereo head unit back to its original location in the dash board, be careful with cables that you just installed so that they do not unplug or get kinked by the head unit. Note: If you had removed screws to pull the car stereo head unit out please screw those back in.
XM Satellite Radio Operation Please refer to the "XM tuner control features" section of your cassette, CO or mobile video receiver manual for instructions on operating your XM satellite radio service. XM Radio lD 1. During XM Satellite Radio reception, press the Seek button to select "CHANNEL 0.
Troubleshooting No Sound • Adjust the volume control of the head unit. • Make sure that all of the cables between the PIA and the head unit and the tuner are securely plugged in. Advisory Message When a problem occurs with the XM Direct system, an error message will be indicated on the display of the head unit.
Troubleshf)oting (Cont) OFF AIR The channel currently selected has stopped broadcasting. • Automatically switches to valid channel. No action is required. LOADING The receiver is reading the channel information. • Wait until the XM tuner completes receiving the information.
~AUDIO"'O~ 12MONTHLIMITEDWARRANTY I I ~ Ri.F:CTRON1CS CORP. PROGRAMMABLEINTERFACEADAPTERCNP2000UCA AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to the original retail purchaser of.
WARRANTY (Cant) THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TOTHE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities.
PRODUCT REGISTRATION PRODUCT PROTECTION: In case of an insurance loss such as fire, flood or theft, your registration will serve as proof of purchase. Thank you for purchasing an Audiovox product.
1. Locate XM Direct 2 Mini-USB port on module. 2. Attach XM Direct 2 USB programming cable. 3. Locate USB 2.0 port on your computer 4. Attach other end of XM Direct 2 programming cable. 5. Program XM Direct 2 module per latest website instructions. www.
.
CONTENTS INCLUDE: Interface Adapter XM Direct 2 Vehicle Tuner Magnetic Mount Antenna Programming Coble- CONNECTION CABLE REQUIRED Choose the proper XM Connection Cable for your car stereo.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Audiovox CNP2000UCA è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Audiovox CNP2000UCA - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Audiovox CNP2000UCA imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Audiovox CNP2000UCA ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Audiovox CNP2000UCA, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Audiovox CNP2000UCA.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Audiovox CNP2000UCA. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Audiovox CNP2000UCA insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
