Manuale d’uso / di manutenzione del prodotto 03-hdvenueu del fabbricante Revolabs
Vai alla pagina of 26
Revolabs HD Venue ™ Wireless Microphone System Models: 01-HDVEN U , 03 -HDVENU EU, 03 -HDVENUC N, 03-HDVENUJP User and Set - up Guide.
© 20 10 REVOLA BS, INC. A ll rights reserved. N o part of this docu ment may be reproduced in any form or by any means without express written permission from Rev olabs, Inc.
Contents Safety and General Inf ormation .................................................................................................................... 4 Introduction ..............................................................................
- 4 - Safety and Gen eral Information Please read the fol lowing in formation to ensure s afe and efficien t use of your Rev olabs system. FCC User In formation FCC ID: T5V01H DVENUNM Revolabs HD Venu.
- 5 - Export La w A ssurances This product is controlled under the export regulati ons of the Uni ted States o f America and Canada. The Governments o f the United States o f America an d Canada may restri ct the exportation or re -exportation of this product to certain des tinations.
- 6 - Introduction Congratulations on your purchase of a Revo labs W ireless Microphone Sy stem! Th is syst em utilizes 1.9 GHz DECT technology, and high band -width audio from multiple wireless micro.
- 7 - Acoustic echo cancellation (AEC) Feedback elimination Level control Equalization Noise cancellation The system is designed to optimize audio capture/reproduction b y providin.
- 8 - Revolab s HD Venue™ Base Stat ion Conn ections The Revolabs HD V enue ™ Base Station, shown below in f ront and rear panel views, manages wireless audio signal p rocessing, pairing, and muting between the Revolabs microphones and the Base Station.
- 9 - Revolabs HD Venu e ™ Base Station Audio Connections There are two 3 .5mm balan ced inputs (either ¼‖ or XLR) and two 3.5mm balanced outputs (either ¼‖ or XLR) on the back panel of the unit p roviding access to each channel‘s audio signal.
- 10 - 1 2 3 4 5 6 7 8 on off Using the Rea r Panel Configurat ion DIP S witches DIP Switch Feature Off (Default) On 1 Output Mixi ng Individu al Outputs Mixed Output 2 Low Pass Fil ter No LPF LPF 3 Audio Output Level Line Level Mic Level 4 Mute Mod e Individu al Mutes No Mutes 5 Sharing M ode All frequencies will be used.
- 11 - DIP Switch 5&6 – Sharing Mode: To use two HD Venue Systems in the same area, both systems must have DIP Switch 5 set to ON. One of the HD Venue Systems must have DIP Sw itch 6 set to ON (A frequen cies) and the other HD Venue System must have DIP Switch 6 set to OFF (B frequencies).
- 12 - Mics Unmute at Startup: By default the m ics go into a muted state when they are removed from the cha rger. Thi s is done to prevent handling no ise as the m icrophone is placed into position. By selecting ‗Mics Unmuted at Startup‘, the mics will go into a n unmuted state when removed from the charger.
- 13 - Battery: This provides the current battery level for the microphone that is paired to each channel and active. The value changes in 12.5% increments and represents the bottom o f the range the battery is in. Therefore a value of 87% means that the battery level is between 87%-100%.
- 14 - 1. Earpiece jac k — accepts the 2.5mm pl ug for the e arpiece. 2. Charging port — doc ks to Rev olabs HD Charger B ases. 3. Pocket clip — also u sed to attach microphone to a lapel, blouse o r lanyard. 4. Mute Button — p ress to mute , un-mute and pair microphone.
- 15 - A djusting the Volume on the Wearable Microphone Ea rpiece To change the volume on the W earable microphone earpiece, u se the dial on the earpiece w ire. Turning th e dial towards the earpiece , as shown in the figure, will increase the volume, an d turning the dial towards th e microphone will decrease th e volume.
- 16 - 3. With the microphone in position on the table, un-mute the microphone by pressing and releasing the Mute button (confirm by a f lashing GREEN LED). 4. To turn microphone off, return the micro phone unit to the Charger Base or press and hold t he Mute button for ~10 seconds until the LED turns solid RED and release button.
- 17 - 5 4 3 2 1 1. Remove the microphone from the Charger Base to turn on and automatically mute the mic. (i ndicated by a flashing RED LED) 2. Directional Tabletop microphones should be located on the table with the a coustic cover pointed toward the users, trying to keep the microphone 2 to 6 feet (.
- 18 - 2. Charging Port — doc ks to all Rev olabs HD Charger Bases . 3. Mute button — press to mute, un-mu te and pair mi crophone. 4. LED display — visual status for mute, un -mute, and pairing. 5. XLR Female connector — balanced audi o for dy namic microphones.
- 19 - 5 4 3 2 1 1. Audio Out port — ac cepts the 2.5m m plug for the earpiece. 2. Charging Port — docks to all Rev olabs HD Charger Bases . 3. Mute button — p ress to mute , un-mute and pair micropho ne. 4. LED display — visual status for mu te, un-mute, and pai ring.
- 20 - 1 2 3 Note: Microphones in new systems must be paired to the Base Station with each m icrophone assigned to a unique channel on the Base Station. Remember, microphones are always muted (f lashing RED LED) when the y are removed f rom the Charger Base and the Mute button needs to be pressed to make it ―live‖ (flashing GREEN LED).
- 21 - Power Module The Charger Ba se requires 5VDC power, provided b y th e AC Adapter. Plug the sup plied AC adapter into an appropriate power outle t 110 -240 AC, 50 -60Hz.
- 22 - Revolabs HD ™ Indicator LEDs The following tables show activ ities associated with the various states shown by the LEDs: Equipment Use Microphone LED Base Station Channel LEDs Meaning Microph.
- 23 - Warranty Revolabs, Inc. warrants this product to be free of manufacturing d efects. Repair or replacement of any defective part or unit (at the discretion of the Seller) w ill be free of charge for the period defined in the Revolabs Professional Products Limited Warranty.
- 24 - Specifications Dimensions, (L, W, H) and We ight : HD Venue Base S tation 16.9‖ (4 3.03 cm) x 8.0‖ (20.32 cm ) x 1.7‖ (4.42 cm), 2.0 lbs (5.45 k g) HD Charger Base 4.6‖ (11.75 cm ) x 3.125‖ (7. 9 cm) x 1.0‖ (2.54 cm ), 0.325 lb s (0.
- 25 - Index Adjusting the Volume, 15 Base Station, 7 Back Panel, 7 Front Panel, 7 Channel LED indicators , 8 Channels , 9 Charger Bays, 20 Charging the Batteries, 21 First-time use, 21 Recharging, 21.
- 26 - R e v o l a b s H D V e n u e ™ W i r e l e s s M i c r o p h o n e S y s t e m M a n u a l 01 - HD V N U M A N - PAP - 11 M A R C H 2 0 1 2 ( R e v 2 . 2 ) No t e : Microphones must be fully charged and paired to the Base Station prior to first use.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Revolabs 03-hdvenueu è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Revolabs 03-hdvenueu - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Revolabs 03-hdvenueu imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Revolabs 03-hdvenueu ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Revolabs 03-hdvenueu, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Revolabs 03-hdvenueu.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Revolabs 03-hdvenueu. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Revolabs 03-hdvenueu insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
