Manuale d’uso / di manutenzione del prodotto I31-NG3 del fabbricante Regency
Vai alla pagina of 28
Model: I31-NG3 I31-LPG3 Owners & Installation Manual 06/01/07 LISTINGS AND CODE APPROVALS These gas appliances have been tested in accordance with AS4553-2000, NZS 5262 and have been certified by the Australian Gas Association for installation and operation as described in these Installation and Operating Instructions.
2 Regency I31-3 Gas Fireplace Inbuilt REGENCY GAS FIREPLACE INBUIL T FIREPLACE TO THE NEW OWNER Congratulations! You are the owner of a state-of-the-art Gas Inbuilt Fireplace by Regency Industries.
3 Regency I31-3 Gas Fireplace Inbuilt T ABLE OF CONTENTS REGENCY GAS FIREPLACE INSERT Operating Instructions Operating Instructions ................................................ 1 6 Lighting Procedure ...............................................
4 Regency I31-3 Gas Fireplace Inbuilt DA T A BADGE (Australia Only) This is a copy of the label that accompanies each Regency I31-3 Gas Inbuilt fireplace. We have printed a copy of the contents here for your review. DATA BADGE NOTE: Regency units are con- stantly being improved.
5 Regency I31-3 Gas Fireplace Inbuilt INST ALLA TION IMPORT ANT : SA VE THESE INSTRUCTIONS The Regency Gas Fireplace must be installed in accordance with these instructions.
6 Regency I31-3 Gas Fireplace Inbuilt GAS CONNECTION 3) Locate the center point where the flue will pass through the chimney above the appli- ance. Move the appliance into the exact location where it is to be installed. Ensure that the Insert is level.
7 Regency I31-3 Gas Fireplace Inbuilt TEST FOR FLUE SPILLAGE A " spillage" test must be made before the installed unit is left with the custom- er. Follow the procedure below: 1) Start all exhaust fans in the home and then close all external doors and windows in the house.
8 Regency I31-3 Gas Fireplace Inbuilt LOG SET INST ALLA TION Read the instructions below carefully and refer to the diagrams. If logs are broken do not use the unit until they are replaced.
9 Regency I31-3 Gas Fireplace Inbuilt Logs D)02-46 and E)02-47 in position. 6) Place the Left Top Log D)02-46 on the pin on Log C)02-56 and on top of the cutout on Log A)02-43. 7) Place the notch in Center Log E)02-47 over Log B)02-45 and across the cutout on Log A)02-43.
10 Regency I31-3 Gas Fireplace Inbuilt FLUSH FRONT INST ALLA TION 1 ) Install Logs before going on to the next step. See the Log Installation instruction sheet or page 8 in the manual. 2 ) Install the bottom glass trim by hooking the trim into the lip on the firebox base.
11 Regency I31-3 Gas Fireplace Inbuilt BA Y FRONT INST ALLA TION 1) Place the bay door onto the 2 pins on the top of the unit. 2) Install bottom louvre by sliding the two bracket clips into the brackets located un- derneath the bay door and secure with 2 screws into the bracket on the bottom of the Bay Front as per diagram above.
12 Regency I31-3 Gas Fireplace Inbuilt HAMPTON CAST F ACEPLA TE INST ALLA TION 1) Lay the faceplate panels flat, face down on something soft so they don't scratch. 2) Attach the side filler brackets to the left and right sides using 3 screws and washer per side.
13 Regency I31-3 Gas Fireplace Inbuilt 11) Mount the cast faceplate panels onto the insert body, sliding the side filler brackets into the space between the glass and the firebox.
14 Regency I31-3 Gas Fireplace Inbuilt BAROSSA CURVED FRONT INST ALLA TION 1) Install bottom louver by matching the holes in louver bracket with holes in firebox frame and secure using 2 screws on each side. 2) Pull down louver. 3) Fix brackets onto firebox, one on each side using 1 screw per side.
15 Regency I31-3 Gas Fireplace Inbuilt INST ALLA TION Thermostat Wire Table CAUTION Do not connect the millivolt wall thermostat wires to the 240 V wires. Recommended Maximum Lead Length (Two-Wire) When Using Wall Thermostat (CP-2 System) OPTIONAL REMOTE CONTROL Use the Optional Remote Control Kit approved for this unit.
16 Regency I31-3 Gas Fireplace Inbuilt OPERA TING INSTRUCTIONS 4) Wait five minutes to allow gas, that may have accumulated in the main burner compart- ment, to escape. If you do smell gas, follow the instructions on the front of this manual. If you don't smell gas continue on to the next step.
17 Regency I31-3 Gas Fireplace Inbuilt MAINTENANCE INSTRUCTIONS 1) Always turn the gas valve to off before cleaning. For relighting, re- fer to lighting instructions. Keep the burner and control compartment clean by brushing and vacuuming at least once a year.
18 Regency I31-3 Gas Fireplace Inbuilt Top View of pilot flame Correct flame pattern has two strong blue flames: 1 flowing around the ther- mopile and 1 reaching towards the rear burner (it does not have to be touching the burner).
19 Regency I31-3 Gas Fireplace Inbuilt FAN MAINTENANCE If your fan requires maintenance or replace- ment, access to the fan is through the plate on the rear wall of the firebox. NOTE: the unit MUST NOT be operated without the fan access panel securely in place.
20 Regency I31-3 Gas Fireplace Inbuilt SERVICE SHOULD BE CARRIED OUT BY AUTHORIZED PERSONNEL ONLY ABNORMAL OPERATION If main burner does not light but pilot stays on, shut down heater and contact your dealer. If excessive carbon on logs or glass contact your dealer for service.
21 Regency I31-3 Gas Fireplace Inbuilt P ARTS LIST MAIN ASSEMBL Y Part # Description Part # Description 1 ) 400-011 Fan Opening Cover 2 ) 910-169/P Fan Motor (240 V) 4 ) 910-714 Power Cord 240 Volts 9.
22 Regency I31-3 Gas Fireplace Inbuilt BURNER ASSEMBL Y & LOG SET Part # Description P ARTS LIST 402-565/P Valve Assembly - NG 402-566/P Valve Assembly - LPG 52) 910-026 RobertShaw Valve - NG 910-.
23 Regency I31-3 Gas Fireplace Inbuilt P ARTS LIST FACEPLA TE ASSEMBL Y Part # Description Part # Description 87) 910-140 Fan HI/OFF/LOW Switch 88) 910-246 Burner ON/OFF Switch 403-912 Faceplate &.
24 Regency I31-3 Gas Fireplace Inbuilt P ARTS LIST BA Y & FLUSH FRONT ASSEMBL Y Part # Description Part # Description Bay Door 400-988 Complete Bay Front c/w Black Trim 102) * Glass Retainer Side .
25 Regency I31-3 Gas Fireplace Inbuilt 403-911 Cast Faceplates (Set) - Black Metallic 403-916 Cast Faceplates (Set) - Black Enamel 187) * Burner On/Off Switch 188) * Fan Speed Control 189) * Knob - Bl.
26 Regency I31-3 Gas Fireplace Inbuilt _____________________________________________________________________________________ ____________________________________________________________ ______________.
27 Regency I31-3 Gas Fireplace Inbuilt W ARRANTY Exclusions: This limited Lifetime Warranty does not extend to or include paint, door or glass gasketing or trim.
Printed in Canada © Copyright 2007, FPI Fireplace Products International Ltd. All rights reserved..
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Regency I31-NG3 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Regency I31-NG3 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Regency I31-NG3 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Regency I31-NG3 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Regency I31-NG3, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Regency I31-NG3.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Regency I31-NG3. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Regency I31-NG3 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
