Manuale d’uso / di manutenzione del prodotto MCCAT18 del fabbricante Raritan Engineering
Vai alla pagina of 61
MasterConsole CAT MCCAT18/MCCAT116 User Guide Release 1.1 Copyright © 2007 Raritan, Inc. MCCAT ‐ 0B ‐ E December 2007 255 ‐ 20 ‐ 0002 ‐ 00 .
This document contains proprietary in formation that is protected by copyright. All rights reserved. No part of this document ma.
Power Safety Guidelines To avoid potentially fatal shock hazard and possible damage to Raritan equipment: • Do not use a 2 ‐ wire power cord in any produc t configuration.
iv Contents Chapter 1 Introduction 1 Product Overview ....................................................................................................................... .............. 1 Product Photos .....................................
Contents v Accessing Active Channels Only .......................................................................................................... 22 The Security Feature ..........................................................
Contents vi STEP 2: Connect the Second ‐ Tier MasterConsole II Units...................................................... 50 STEP 3: Specify the Type of the Connected Second ‐ Tier Device in the OSD .
1 Congratulations on purchasing a Raritan MasterConsole CAT KVM (keyboard/video/mouse) switch. This User Gui de explains how to use these KVM switches to access and control multiple computers (or servers).
Product Features 2 Model: MCCAT116 (Front and Rear Vie w) Product Features • One user can control up to 16 computers per unit.
Chapter 1: Introduction 3 • A maximum of 256 computers can be controlled in a two ‐ tier cascaded MCCAT system • The unit intercon.
4 This chapter addresse s only the basic connections for setting up an MCCAT system and basic operations fo r interacting with the computers being connected to the system.
Chapter 2: Quick Start 5 p SCAN button Toggles Auto Scan on/off. When the AutoSca n function is on, the system automatically cycles through all channels until the function is turned off.
Connecting Computers 6 r Admin port Connects to a computer via a serial cable for upgradin g the MCCAT ʹ s firmware.
Chapter 2: Quick Start 7 Connect the HD15 video connector of the CIM to the HD15 vi deo port of the computer.
Connecting Computers 8 3. Use a Cat5 UTP cable to connect from one of the channels ports of the MCCAT to the RJ45 port of the CIM being connected to the computer.
Chapter 2: Quick Start 9 6. Connect one end of the MCCAT ʹ s power cord to it s power jack and the other end to the appropriate power outlet. 7. Power on the monitor, connected computer(s) and the MCCAT un it.
Selecting a Channe l 10 Note: The front panel o peration becomes invalid if the OSD remains displaye d on the screen. Therefore, mak e sure the OSD is NOT onscreen when operating with the front panel buttons.
Chapter 2: Quick Start 11 Now you can control the computer with the keyboard and mouse attached to the MCCAT unit. Warning!! MCCAT does not support real ‐ time chann el detecti on when channel ch anges occ ur.
Changing Channel Names 12 2. Press F3 to go to the Edi t Names and Scan Rate menu. 3. Press the arrow keys ( Ï , Ð , Í , Î ), Tab or Shift+T ab to select the desired chan nel name.
13 The product provides a simple OSD us er interface fo r both of the channel selection and system configuration. In ad dition, the OSD shows information relevant to the MCCAT unit or the ch annel being accessed.
Frequently Used Keys 14 q Message bar, which shows the options or keys that are applicable to the se lected field, or shows prom.
Chapter 3: Introduction to the On-Screen Display (OSD) 15 Introduction to the Selection Menu The Selection Menu , showing all channe ls of the system, allows you to access channels.
Introduction to the Selection Menu 16 Field Meaning Description Name Name of the device or computer connected to the channel If there is any .
17 In this chapter, you will learn more about the OSD or front panel operations for advanced features, such as updating the channel status, setting up the security feature, etc.
Toggling the Channel Sorting 18 2. If the current OSD menu is not the Selection Menu , press F2 to have the Selection Menu displayed. 3. Press F12 to toggle the sorting.
Chapter 4: Advanced Operation and System Configuration 19 Cycling Through Channels Instead of manu ally selecting the desired channel to view its video, you.
Cycling Through Channels 20 Turn off AutoScan Press the SCAN button so the LED light is off. The system will stop at the last scanned channel.
Chapter 4: Advanced Operation and System Configuration 21 Turn off AutoScan Activate the OSD again and press Alt+F6 .
Refreshing the Channel Status 22 Refreshing the Channel Status From the OSD or LED status, you can tell which channel is connected to a powered device and which is not. However, MCCAT does not support real ‐ time channel detection.
Chapter 4: Advanced Operation and System Configuration 23 The Security Feature You can prevent unauthorized acce ss to the system and the attached computers by activating the security feature.
The Security Feature 24 Accessing the System in the Security Mode After the system or the MCCAT unit enters the security mode, a messa ge “Security Mode Protected”appears on the screen.
Chapter 4: Advanced Operation and System Configuration 25 3. Type raritan and press Enter . Note that the password is ca se sensitive.
System Configuration 26 3. Type the Admin password (def ault: raritan ) and press Enter . Note that the password is ca se sensitive. The Administration Menu appears. 4.
Chapter 4: Advanced Operation and System Configuration 27 2. Press Ï or Ð to change the value or switch between options of the selected field.
System Configuration 28 Mode Global, Individual Determines which scan mode is applied once the AutoScan function is act ivated. There are two scan modes: Global and In dividual .
Chapter 4: Advanced Operation and System Configuration 29 Green Mode On, Off Toggles the power ‐ sa ving function on or off.
Accessing the Help Menu 30 4. Type numeric digits to change the scan time. The scan time is measured in seconds.
Chapter 4: Advanced Operation and System Configuration 31 Function Key Description F4 Displays the Configuration Menu . F5 Displays the Administration Menu . F6 Turns on the AutoScan function.
32 You can cascade various MCCAT units to organize a two ‐ tier KVM switch system and expand the number of availabl e channels accordingly. A mix of different MCCAT models is permitted.
Chapter 5: Two-Tier System 33 q First ‐ tier MCCAT unit r Keyboard, mous e and monitor (attached to the first ‐ tier unit only) Setting .
Settin g Up a Two-Ti er System 34 STEP 2: Connect the Second-Tier MCCAT Unit Now you need to connect the second ‐ tier MCCAT units to the first ‐ tier MCCAT unit. A mix of different MCCAT models is permitted in such a system.
Chapter 5: Two-Tier System 35 3. Connect one end of the Cat5 UTP cable to the RJ45 port of the CIM being attached to the sec.
Settin g Up a Two-Ti er System 36 STEP 3: Connect the Keyboard, Mouse and Monitor to the First-Tier Device Connect a keyboard, mouse and monitor to the first ‐ tie r MCCAT unit. For details, refer to Step 5 in Connecting Computers (on page 6).
Chapter 5: Two-Tier System 37 4. The characters or dots (see the figure below), from left to right, represent channel numbers 1, 2, 3, and so on of the first ‐ tier unit.
Accessing the Second-Tier Channels 38 STEP 5: Connect Computers to the MCCAT System You can connect computers to avai lable channel ports of any MCCAT units.
Chapter 5: Two-Tier System 39 Press Page Down or Page Up until you see the page where the desired second ‐ tier channel is available .
40 You can upgrade MCCAT’s firmware to benefit from the latest enhancements and features whenever new MCCAT firmware is released on Raritan’s website.
Chapter 6: Firmware Upgrade 41 STEP 2: Connect the MC CAT Unit to the Co mputer Running the Upgrade Utility 1. Prepare one DB9 male ‐ to ‐ female serial (RS ‐ 232) cable. Note: If you don ʹ t have this cable, contact Raritan technical support for details.
STEP 3: Launch the Upgrade Ut ility 42 STEP 3: Launch the Upgrade Utility The upgrade util ity for MCCAT is the same one fo r Raritan ʹ s Paragon products, that is, the ParagonUpdate utility.
Chapter 6: Firmware Upgrade 43 d. Click the Port field and type the appropriate number of the serial port. For example, if the MCCAT un it connects to the computer via COM 1 , type 1 .
STEP 4: Power Cycle the Upgraded MCCAT Unit 44 7. Click Yes when the follow ing message box appea rs. 8. A progress indicator is sho wn on the bottom of the dialog, displaying the upgrade status.
45 In This Chapter Measurement .................................................................................................... 45 Supported Re solutions .
46 Field or Function Factory Default Setting Administration password raritan (note the password is case sensitive) AutoScan OFF AutoScan mode Global AutoSkip OFF Scan time per channel in the Individual scan mode 5 seconds Device “.
47 You can connect other Raritan products to the MCCAT unit, such as MasterConsole II, which can work as the second t ie.
Compatible CIMs 48 Connecting a Serial Devi ce via the Serial CIM To connect an ASCII serial device, LAN/WAN component or a computer through a seria.
Appendix C: Compatib ility with Other Raritan Products 49 Installing a Serial CIM Take these steps to attach a serial CIM to the serial por t of a serial device or computer and to your MCCAT sy stem.
Compatibil ity with Maste rConsole II 50 3. The rightmost LED on the front panel is lit, indicating the device is now programmed as a second ‐ tier device.
51 Problem Solution No power • Check the power cord. • Make sure the power switch is turned ON.
Compatibil ity with Maste rConsole II 52 Problem Solution After a period of trouble ‐ free operatio n, the keyboard attached to MCCAT locks (unable .
53 A A Glance at the Product • 4 Accessing Active Channels Only • 22 Accessing the Help Menu • 30 Accessing the .
Index 54 Connect the Keyboard, Mouse and Monitor to the First-Tier Device • 36 Launch the Upgrade Utility • 42 Specify the Type of the Connected Second-Tier Device in the OSD • 50 STEP 4 .
¾ U.S./Canada/Latin America Monday ‐ Friday 8 a.m. ‐ 8 p.m. ET Phone: 800 ‐ 724 ‐ 8090 or 732 ‐ 764 ‐ 8886 For CommandCenter .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Raritan Engineering MCCAT18 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Raritan Engineering MCCAT18 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Raritan Engineering MCCAT18 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Raritan Engineering MCCAT18 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Raritan Engineering MCCAT18, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Raritan Engineering MCCAT18.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Raritan Engineering MCCAT18. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Raritan Engineering MCCAT18 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
