Manuale d’uso / di manutenzione del prodotto 735A-E-002A del fabbricante Radio Shack
Vai alla pagina of 148
© 2003 RadioShack Corporation. All Rights Reserved. RadioShack and RadioShack.com are trademarks u sed by Radi oShac k Cor pora tion. OWNER’S MA NUAL — Please r ead before u sing thi s equipm ent.
735A-E-002A GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THE UNIT IN THE U.S.A. (not applicable to other areas). NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
E-1 Safety Precautions Congratulations on your selection of the CASIO electronic musical instrument. • Before using the instrument, be sure to carefully read through the instructions contained in this manual. • Please keep all information for future reference.
E-2 735A-E-004A Safety Precautions Batteries Misuse of batteries can cause them to leak, resulting in damage to nearby objects, or to explode, creating the risk of fire and personal injury. Always make sure you observe the following precautions. • Never try to take batteries apart or allow them to become shorted.
E-3 Safety Precautions CAUTION AC Adaptor Misuse of the AC adaptor creates the risk of fire and electric shock. Always make sure you observe the following precautions. • Do not locate the electric cord near a stove or other sources of heat. • Never pull on the cord when unplugging from the electrical outlet.
E-4 735A-E-006A Safety Precautions Location Avoid the following locations for this product. Such locations create the risk of fire and electric shock. • Areas subject to high humidity or large amoun.
E-5 735A-E-007A Congratulations upon your selection of this CASIO musical instrument. This keyboard pr ovides you with the following features and functions. ❐ 516 T ones Include Rich Advanced T ones A total of 300 Advanced T ones are pr ogrammed with DSP tones to make them richer and mor e powerful.
E-6 ❐ Mixer Y ou can specify tone, volume, pan position, and other parameters for each built-in Auto Accompaniment part. Y ou can also control the same parameters for each channel during MIDI input. ❐ Registration Memory Keyboard setups can be stor ed in memory for later recall and instant settings whenever you need them.
E-7 735A-E-009A Contents W elcome... Safety Precautions ................ E-1 Introduction ........................... E-5 Contents ................................. E-7 General Guide ...................... E-10 Attaching the Score Stand ..............
E-8 735A-E-010A Contents Using Auto Harmonize ........................... E-45 Adjusting the Accompaniment V olume ... E-46 Mixer Function ..................... E-47 What you can do with the Mixer ............. E-47 T urning Channels On and Off ......
E-9 Contents 735A-E-01 1A Company and pr oduct names used in this manual may be register ed trademarks of others. Using External Storage Media ............... E-96 Saving Files ........................................... E-98 Loading a File ..........
E-10 735A-E-012A General Guide 8 C 0 K L A B I T * 3 S R U 1 2 7 3 6 5 4 9 F D G H E M M * 2 Q N O P * 1 V W X Y Z [ ] a b J _ c WK3000_e_10-25.p65 03.
E-11 General Guide 735A-E-013A • Illustrations in this User ’ s Guide shows the WK-3500. 1 POWER button 2 Power indicator 3 MODE button 4 EFFECT button 5 SYNTH button 6 MIXER button 7 TRANSPOSE/FU.
E-12 a Number buttons b [+]/[ – ] buttons (YES/NO) • For input of numbers to change displayed settings. • Negative values can be changed only by using [+] and [ – ] to increment and decrement the displayed value. Playing a Demo T une * 4 Pressing the DEMO button starts demo tune play .
E-13 Rear Panel • WK-3500 h MIDI OUT terminal i MIDI IN terminal j SUST AIN/ASSIGNABLE JACK terminal k LINE OUT R, LINE OUT L/MONO terminal l DC 12V terminal OUT IN SUSTAIN/ ASSIGNABLE JACK MIDI DC .
E-14 General Guide 735A-E-016A About the display 1. TONE/RHYTHM indicator TONE is shown during tone selection and display , while RHYTHM is shown during rhythm selection and display . 2. T one/Rhythm number (number area) Number of currently selected tone or rhythm.
E-15 13. Level meter The numbers 1 through 16 correspond to Mixer channels. The level meter indicates which channels are on and of f, and also indicates the volume level. Drawbar Organ Mode In the Drawbar Organ Editing Mode, the level meter shows the position of each drawbar and the status of each percussion parameter .
E-16 This keyboard can be power ed by current from a standard household wall outlet (using the specified AC adaptor) or by batteries. Always make sure you turn the keyboard of f whenever you are not using it. Using batteries Always make sure you turn of f the keyboard befor e loading or replacing batteries.
E-17 Using the AC Adaptor Make sure that you use only the AC adaptor specified for this keyboard. Specified AC Adaptor: AD-12 Also note the following important warnings and precautions when using the AC adaptor . W ARNING Misuse of the AC adaptor creates the risk of fire and electric shock.
E-18 Power Supply Settings T one, rhythm, and other “ main keyboard settings ” in ef fect when you turn off the keyboar d manually by pressing POWER button or when Auto Power Off turns of f power ar e still in effect the next time you turn power back on.
E-19 Connections • WK-3500 Phones and Line Out T erminals Before connecting phones or other external equipment, be sure to first turn down the volume settings of the keyboar d and the connected equipment. Y ou can then adjust volume to the desired level after connections ar e complete.
E-20 Connections • WK-3000 Phones/Output T erminal Before connecting phones or other external equipment, be sure to first turn down the volume settings of the keyboar d and the connected equipment. Y ou can then adjust volume to the desired level after connections ar e complete.
E-21 Sustain Pedal • W ith piano tones, depressing the pedal causes notes to linger , much like a piano ’ s damper pedal. • W ith organ tones, depressing the pedal causes notes to continue to sound until the pedal is released.
E-22 This section provides information on performing basic keyboard operations. T o play the keyboard 1 Press the POWER button to turn the keyboard on. 2 Use the VOLUME knob to set the volume to a relatively low level. 3 Play something on the keyboard.
E-23 T o select a tone 1 Find the tone you want to use in the tone list and note its tone number . 2 Press the TONE button. 3 Use the number buttons to input the three digit tone number for the tone you want to select. Example : T o select “ 332 ACOUSTIC BASS GM ” , input 3, 3 and then 2.
E-24 Basic Operations PIANO SETTING Button Pressing this button changes the setup of the keyboar d to optimize it for piano play . Settings T one Number: “ 000 St.
E-25 Using the MODULA TION Modulation applies vibrato, which modulates the pitch of a note. It works best with notes that are sustained (held) by keeping a keyboard key held down, especially when playing the melody with a violin or other similar tone.
E-26 Using the Drawbar Organ Mode Y our keyboard has built-in “ drawbar organ tones ” that can be alter ed using nine digital drawbars whose operations are similar to the controls on a drawbar or gan. Y ou can also select percussion or key click. There is r oom in memory for storage of up to 100 user-cr eated drawbar tone variations.
E-27 Ft 1 6 ’ 5 1 / 3 8 4 2 2 / 3 2 1 3 / 5 1 1 / 3 1 16 CLICK SECOND THIRD PERCUSSION DECAY Decrease Currently selected parameter Value Parameter Name Increase Currently selected drawbar Drawbar bu.
E-28 Using the Drawbar Organ Mode 735A-E-030A T o select a drawbar organ tone 1 Find the drawbar organ tone you want to use in the tone list and note its tone number . 2 Press the DRA WBAR ORGAN button. • This causes the drawbar organ tone selection scr een to appear .
E-29 Using the Drawbar Organ Mode 735A-E-031A Editing Synthesizer Mode Parameters and DSP Parameters of Drawbar T ones As with standard (non-drawbar) tones, you can edit the Synthesizer Mode parameters and DSP parameters of drawbar organ tones. See “ Drawbar Or gan Mode Operational Flow ” on page E-26.
E-30 Using the Drawbar Organ Mode 735A-E-032A T o save an edited drawbar organ tone 1 After editing parameters, use the [ 왗 ] and [ 왘 ] CURSOR buttons to display “ More? ” . 2 Press the [ 왔 ] CURSOR button three times to display the screen for inputting a tone name and assigning a tone number .
E-31 Applying Effects to T ones This keyboard pr ovides you with a selection of effects that you can apply to tones. The built-in effects include a wide variety of variations that give you access to a selection of general digital effects. Effect Blocks The following shows how the effects of this keyboar d are organized.
E-32 Applying Effects to T ones Selecting a DSP T ype In addition to the 100 built-in effect types, you can also edit effect types to cr eate your own and store them in user memory . Y ou can have up to 100 effect types in user memory at one time. Y ou can also select the DSP type of the last DSP enabled tone that you used.
E-33 Applying Effects to T ones DSP Parameters The following describes the parameters for each DSP . DSP ■ Parameter 0 to 7 These parameters differ in accor dance with the algorithm * of the selected DSP type. See the “ Ef fect List ” on page A- 17 and the “ DSP Algorithm List ” on page A-19 for more information.
E-34 Applying Effects to T ones Selecting REVERB Perform the following steps to select REVERB. 1 Press the EFFECT button, so the pointer appears next to EFFECT on the display screen. 2 Press the [ 왔 ] CURSOR button once. • This displays the reverb editing scr een.
E-35 Applying Effects to T ones REVERB Parameters Reverb effects are associated with either a r everb type or delay type. Parameter settings depend upon the associated type. Reverb T ype (No. 0 to 5, 8 to 13) ■ Reverb Level (Range: 000 to 127) Controls the r everb size.
E-36 Applying Effects to T ones Changing the Settings of CHORUS Parameters Y ou can control the relative strength of an ef fect and how it is applied. The parameters you can control depend on the effect. See the following section titled “ CHORUS Parameters ” for more information.
E-37 Applying Effects to T ones Using the Equalizer This keyboard has a built-in four -band equalizer and 10 differ ent settings from which you can choose. Y ou can adjust the gain (volume) of all four equalizer bands within the range of – 12 to 0 to +12.
E-38 735A-E-040A This keyboard automatically plays bass and chor d parts in accordance with the chor ds you finger . The bass and chord parts are played using sounds and tones that ar e automatically selected to select the rhythm you ar e using.
E-39 735A-E-041A Auto Accompaniment Selecting a Rhythm This keyboard pr ovides you with 140 exciting rhythms that you can select using the following procedur e. Y ou can also transfer accompaniment data from your computer and store up to 16 of them as user r hythms in keyboard memory .
E-40 Auto Accompaniment NOTE • The accompaniment keyboard can be used for playing chords only . No sound will be produced if you try playing single melody notes on the accompaniment keyboard. CASIO CHORD This method of chord play makes it possible for anyone to easily play chords, regar dless of previous musical knowledge and experience.
E-41 735A-E-043A FINGERED FINGERED provides you with a total of 15 dif ferent chor d types. The following describes the FINGERED “ accompaniment keyboard ” and “ melody keyboard ” , and tells you how to play a C-root chord using FINGERED.
E-42 Chords Recognized by This Keyboard The following table identifies patterns that are recognized as chords by FULL RANGE CHORD. Pattern T ype FINGERED Standard Fingerings Number of V ariations The 15 chord patterns shown under FINGERED on page E-41.
E-43 Auto Accompaniment 735A-E-045A Using an Intro Pattern This keyboard lets you insert a short intr o into a rhythm pattern to make startup smoother and more natural.
E-44 Auto Accompaniment 735A-E-046A Synchro Starting Accompaniment with Rhythm Play Y ou can set up the keyboard to start rhythm play at the same time you play the accompaniment on the keyboard. The following procedur e describes how to use synchr o start.
E-45 Auto Accompaniment 735A-E-047A Using One-touch Preset One-touch preset automatically makes the main settings listed below in accordance with the rhythm pattern you ar e using.
E-46 Auto Harmonize T ypes Auto Harmonize lets you select from among the 10 Auto Harmonize types. T ype changing is performed by the setting item using the TRANSPOSE/FUNCTION button. See “ Changing Other Settings ” on page E-79 for more information.
E-47 735A-E-049A What you can do with the Mixer This keyboard lets you play multiple dif ferent musical instrument parts at the same time during auto- accompaniment play , song memory playback, receipt of data through the MIDI terminal, etc.
E-48 Mixer Function 735A-E-050A Using the Parameter Edit Mode Editing the Parameters for Channels 1 through 16 In the Parameter Edit Mode, you can change the settings of ten differ ent parameters (including tone, volume, and pan pot) for the channel you selected on the Mixer screen.
E-49 Mixer Function 735A-E-051A ■ Octave Shift (Range: – 2 to 0 to +2) Y ou can use octave shift to shift the range of the tone up or down. When using the piccolo tone, there may be cases when very high notes you want to play are not included within the range of the keyboard.
E-50 Rv b Se n d Effect Parameters The Mixer lets you control the ef fects applied to each individual part, making it differ ent from the Ef fect Mode, whose settings are applied to all parts in general. ■ Reverb Send (Range: 000 to 127) This parameter controls how much r everb is applied to a part.
E-51 The Synthesizer Mode of this keyboard pr ovides the tools for creating your own original tones. Simply select one of the built-in tones and change its parameters to create your own original sound. Y ou can even store your sounds in memory and select it using the same procedur e as that used to select a preset tone.
E-52 ■ Resonance Resonance enhances the harmonic components in the vicinity of the cutoff fr equency , which creates a distinctive sound. A larger r esonance value enhances the sound as shown in the figure. NOTE • With some tones, a large resonance value can cause distortion or noise during the attack part of the tone.
E-53 Saving User T ones The group of tone numbers fr om 600 through 699 (User 001 thr ough User 100) is called the “ user area ” because they are r eserved for storage of user tones. After you r ecall a preset tone and change its parameters to cr eate your own user tone, you can store it in the user area for later r ecall.
E-54 Creating a User T one Use the following procedur e to select a preset tone and change its parameters to create a user tone. 1 First, select the preset tone you want to use as a basis for your user tone. 2 Press the SYNTH button. • This enters the Synth Mode, which is indicated by the pointer next to SYNTH on the display screen.
E-55 Synthesizer Mode 735A-E-057A V alue Meaning oFF Off vib Contr ol Change 01h (Modulation) dp0 Control Change 16 (Normally assigned to DSP Parameter 0.) dp1 Control Change 17 (Normally assigned to DSP Parameter 1.) dp2 Control Change 18 (Normally assigned to DSP Parameter 2.
E-56 ■ Vibrato W aveform (Range: See below.) Specifies the vibrato waveform. ■ Vibrato Delay (Range: – 64 to 00 to +63) Specifies the amount of time before vibrato starts.
E-57 Synthesizer Mode 735A-E-059A DSP Settings Use the DSP editing scr een to select the DSP type and to edit parameters. 1 Select a tone, press the SYNTH button, and then configure parameter settings. 2 After everything is the way you want, press the [ 왔 ] CURSOR button once.
E-58 5 Press [ 왔 ] CURSOR to save the user tone. • This will display a confirmation message asking whether you really want to save the data. Press the YES button to save the data. • The message “ Complete ” appears momentarily on the display , followed by the tone or rhythm selection screen.
E-59 Registration Memory Features Registration memory lets you store up to 32 keyboar d setups (4 sets x 8 banks) for instant recall whenever you need them.
E-60 T o Save a Setup in Registration Memory 1 Select a tone and rhythm, and otherwise set up the keyboard the way you want it. • See “ Registration Memory Settings ” on page E-59 for details on what data is stored in the registration memory . 2 Use the BANK button or the number buttons to select the bank you want.
E-61 735A-E-063A Song Memory Function This keyboard lets you r ecord up to five separate songs in song memory for later playback. There ar e two methods you can use to recor d a song: real-time recor ding where you record the notes as you play them on the keyboard, and step recor ding where you input chords and notes one-by-one.
E-62 Song Memory Function 735A-E-064A Using Real-time Recording W ith real-time recor ding, the notes you play on the keyboard are recor ded as you play them. T o record with real-time recording 1 Press the SONG MEMOR Y button twice to enter real-time record standby .
E-63 Song Memory Function 735A-E-065A T rack 1 Contents After Real-time Recording In addition to keyboard notes and accompaniment chor ds, the following data is also recor ded to T rack 1 during r eal- time recor ding. This data is applied whenever T rack 1 is played back.
E-64 Song Memory Function 735A-E-066A Playing Back from Song Memory Once you recor d tracks to song memory , you can play them back to see what they sound like. T o play back from song memory 1 Use the SONG MEMOR Y button to enter playback standby , and then use the number buttons to select a song number (0 to 4).
E-65 Song Memory Function 735A-E-067A T o record chords with step recording 1 Press the SONG MEMOR Y button three times to enter step recording standby , and then use the number buttons to select the song number (0 to 4). 2 Make the following settings.
E-66 Specifying Chords in the Normal Mode When the MODE button is set to NORMAL during step recor ding, you can specify chords using a method that is differ ent from CASIO Chor d and Fingered fingerings.
E-67 Song Memory Function T o record to T racks 2 through 6 using real-time recording Y ou can r ecord to T racks 2 through 6 while playing back what you originally recor ded on T rack 1 and any other tracks that are already r ecorded.
E-68 Song Memory Function T rack Contents After Real-time Recording In addition to keyboard notes, the following data is also recor ded to the selected track during real-time recor ding.
E-69 NOTE • Use the procedure under “ Correcting Mistakes While Step Recording ” on this page to correct input mistakes you make during step recording. • Y ou can add on to a track that already contains recorded data by selecting that track in step 2 of the above procedure.
E-70 Song Memory Function 4 Press the YES button. • This deletes all data from the location you specified and enters step recor d standby . • Pressing the [ 왖 ] CURSOR button or the NO button cancels deleting the data.
E-71 Song Memory Function 4 Use the [ 왗 ] and [ 왘 ] CURSOR buttons to move to the location in track where the note or parameter you want to change is located. Note editing example 5 Make any changes in the value that you want. • The actual procedur es you use to change a parameter depend on the type of data it contains.
E-72 Song Memory Function NOTE • In the case of real-time recording, you later can change tone numbers you specified while recording to T racks 1 through 6 is in progress. • Y ou can only change tone numbers that were originally set for T racks 2 through 6 using step recording.
E-73 Song Memory Function T o delete a specific track 1 Press the SONG MEMOR Y button once to enter playback standby . 2 Use the [+] and [ – ] buttons to select the number of the song that contains the track you want to delete. 3 Press the [ 왔 ] CURSOR button twice.
E-74 Keyboard Settings 2 Press the LA YER button. 3 Select the layered tone. Example: T o select “ 360 FRENCH HORN GM ” as the layered tone, use the number buttons to in- put 3, 6 and then 0. 4 Now try playing something on the keyboard. • Both tones are played at the same time.
E-75 Main Tone (STRINGS 1) Split point Split Tone (PIZZICATO GM) Using Split W ith split you can assign two different tones (a main tone and a split tone) to either end of the keyboard, which lets you play one tone with your left hand and another tone with your right hand.
E-76 T o split the keyboard and then layer tones 1 Press the TONE button and then input the tone number of the main tone. Example: T o set “ 361 BRASS GM ” as the main tone. 2 Press the SPLIT button and then input the number of the split tone. Example: T o set “ 345 PIZZICA TO GM ” as the split tone.
E-77 Tr a n s . Tr a n s . 735A-E-079A Keyboard Settings Transposing the Keyboard T ranspose lets you raise and lower the overall key of the keyboard in semitone units. If you want to play an accompaniment for a vocalist who sings in a key that ’ s differ ent from the keyboard, for example, simply use transpose to change the key of the keyboard.
E-78 Tuning the Keyboard The tuning feature lets you fine tune the keyboard to match the tuning of another musical instrument. T o tune the keyboard 1 Press the TRANSPOSE/FUNCTION button. 2 Use the [ 왗 ] and [ 왘 ] CURSOR buttons to display the tuning screen.
E-79 Changing Other Settings Setting T ypes The table below shows the parameters whose settings you can change. Setting menu T ranspose (T rans.) Auto Harmonize (AutoHarm) T ouch Response (T ouch) T u.
E-80 T o use the keyboard settings menu 1 Press the TRANSPOSE/FUNCTION button. • This causes a pointer to appear on the display next to TRANSPOSE/FUNCTION. 2 Use the [ 왗 ] and [ 왘 ] CURSOR buttons, and the [ 왖 ] and [ 왔 ] CURSOR buttons to recall the items whose settings you want to change.
E-81 735A-E-083A 3 Use the [+] and [ – ] buttons or the number buttons to change the values. • Settings you make are applied even if you do not pr ess the EXIT button. • See the following section titled “ Setting Menu Items ” for details on each setting.
E-82 735A-E-084A Keyboard Settings Setting Menu Items 쏋 Auto Harmonize T ypes Y ou can select from among the 10 differ ent types of auto harmonize listed below .
E-83 쏋 Delete/Initialize Settings Description Deletes selected SMF data. Deletes selected user rhythm data. Deletes selected user tone data. Initializes parameters assigned by the Mixer or by input from an external sequencer . Initializes all parameters, except for the display contrast setting.
E-84 Using the SMF Player The letters “ SMF ” stand for Standard MIDI File, which is a file format that allows MIDI data to be shar ed between different software and sequencers. Ther e are actually three SMF formats, named SMF 0, SMF 1, and SMF 2.
E-85 SMF Player Mode Operational Flow [ 왗 ], [ – ] Select file name. Select play along part. Select playback mode. Select music Select output mode. S 1 SMF Player indicator Lights ABC1 Playback Mode + File Name 04 ABC 1 Part Number + File Name Error (Other errors may also occur .
E-86 735A-E-088A Using the SMF Player Playing Back an SMF Note that the first step you need to perform in the procedur e below depends on whether you are playing back fr om Flash memory , a SmartMedia card, or a floppy diskette (WK-3500 only).
E-87 Configuring Other Settings T o configure other settings 1 Select the file you want to play back. • Perform steps 1 through 3 under “ T o play back an SMF ” to select a file. 2 Press the [ 왔 ] CURSOR button to display a screen for selecting the part you want to play on the keyboard (play along part).
E-88 SMF Player Error Messages The following explains what you should do when an error message appears in the SMF Player Mode. 735A-E-090A Using the SMF Player Use only Format 0 SMF data. Use different data. You are attempting to play SMF data that is not Format 0.
E-89 735A-E-091A MIDI What is MIDI? The letters MIDI stand for Musical Instrument Digital Interface, which is the name of a worldwide standard for digital signals and connectors that make it possible to exchange musical data between musical instruments and computers (devices) produced by dif ferent manufactur ers.
E-90 Sending and Receiving MIDI Messages This keyboard can send notes you play on the keyboar d, as well as auto accompaniment patterns and Song Memory playback as MIDI messages to another device. MIDI Send Data ■ Keyboard Play Each keyboard part (Channels 1 thr ough 4) is sent over its own individual MIDI channel.
E-91 Using the Data Download Service Y ou can download the following type of data from CASIO MUSIC SITE (http://music.casio.com) to your computer , and then transfer it to the keyboard.
E-92 Saving Data Y ou can save data you create and data you transfer to the keyboard from a computer to the keyboar d ’ s built-in Flash memory , or to a SmartMedia card TM or floppy diskette (WK-3500). In this manual, SmartMedia car ds and floppy diskettes are referred to as “ external storage media ” .
E-93 Saving Data Using a SmartMedia Card Y our keyboard is equipped with a card slot that supports the use of SmartMedia TM cards that you can use to stor e tunes you transfer from your computer , songs you have stored in the keyboard ’ s memory , and other data.
E-94 Inserting and Removing a SmartMedia Card The following describes how to insert a SmartMedia card into the card slot and how to r emove it. T o insert a SmartMedia card into the card slot W ith the contact side of the SmartMedia card facing downwards, insert the card into the car d slot.
E-95 • Do not use a computer , another electronic musical instrument, or any other device to change a file name or file contents created with this keyboard. Doing so can make the data unusable by this keyboard and even cause malfunction of the keyboard.
E-96 Inserting and Ejecting a Diskette The following describes how to insert a diskette into the disk drive and how to eject it. T o insert a diskette into the floppy disk drive 1 W ith the label area of the diskette facing up, insert the diskette shutter first into the disk drive, as shown in the illustration.
E-97 4 Use the [ 왗 ] and [ 왘 ] CURSOR buttons to display the screen for the type of operation you want to perform. • See the pages refer enced below for details about using each of the above menu operations.
E-98 Saving Files Y ou can use the procedures in this section to save Song Memory , Synthesizer , and other data you create to external storage media for later loading when you need it. See “ Savable File T ypes ” on page E-86 for information about the type of data you can save.
E-99 0 Press the YES button to save the data. This will cause the data access lamp to light and the message “ Pls W ait ” to appear on the display to indicate that a card access operation is being performed. Never try to perform any other operation on the keyboard while the card is being accessed.
E-100 0 After selecting the user area, press the [ 왔 ] CURSOR button. • This will display a confirmation message asking whether you really want to load the data. If you already have data in the user ar ea, the message will ask if you want to overwrite the existing data with the loaded data.
E-101 5 Use the [ 왗 ] and [ 왘 ] CURSOR buttons to select the type of the file you want to rename. 6 Press the [ 왔 ] CURSOR button to display the file name selection screen. 7 Use the [ 왗 ] and [ 왘 ] CURSOR buttons or [+] and [ – ] buttons to select the name of the file you want to rename.
E-102 7 Use the [ 왗 ] and [ 왘 ] CURSOR buttons or [+] and [ – ] buttons to select the name of the file you want to delete. 8 After selecting the file, press the [ 왔 ] CURSOR button. • This will display a confirmation message asking whether you really want to delete the file.
E-103 Saving Data 735A-E-105A Inputting Characters The following describes the types of characters you can input when saving data to the user area and external storage media. User Area Data External Storage Media Data Y ou can input the same characters as those that are allowed for MS-DOS file names.
E-104 Saving Data 735A-E-106A SmartMedia Card Error Messages Display Message Cause Action Err Carf R/W Err CardFull Err No Card Err Name Err ReadOnly Err Format Err Mem Full Err Not SMF0 Err No File Err Protect Err Convert Err WrongDat There is something wrong with the card.
E-105 Disk Drive Error Messages (WK-3500 Only) Display Message Cause Action Err ReadOnly Err Format Err Disk R/W Err DiskFull Err Mem Full Err Not SMF0 Err No Disk Err No File Err Protect Err Convert Err WrongDat Err Name Attempt to save a file using the same name as an existing file that is read only.
E-106 T roubleshooting Problem Possible Cause Action See page No keyboard sound Any of the following symptoms while using battery power. • Dim power indicator • Instrument does not turn on.
E-107 Sound output does not change when key pressure is varied. Playing the keyboard sounds two tones. Different tones sound when keys in different keyboard ranges are pressed. The key or tuning does not match when playing along with another MIDI machine.
E-108 T roubleshooting Problem Possible Cause Action See page Flash memory is corrupted. There is something wrong with the card. The keyboard is writing data to its Flash memory, a SmartMedia card, or a floppy diskette (WK-3500 only).
E-109 Specifications 735A-E-1 11A Model: WK-3500/3000 Keyboard: 76 standard-size keys, 6 1 / 4 octaves with touch response (OFF/1/2/3) T ones: 300 Advanced T ones + 200 Preset T ones + 16 Drum Sets + .
E-110 Synthesizer Function Parameters: Attack time; release time; r esonance; cutoff fr equency; vibrato type; vibrato delay; vibrato depth; vibrato rate; octave shift; level; touch sense; reverb send.
E-111 T erminals MIDI T erminals: IN, OUT Sustain/Assignable T erminal: Standard jack (sustain, sostenuto, soft, r hythm start/stop) • WK-3500 Headphones: Stereo standar d jack Output Impedance : 200 Ω Output V oltage : 250mV (RMS) MAX Line Out (R, L/MONO): Standard jack x 2 Output Impedance : 3k Ω Output V oltage : 1.
E-112 Avoid heat, humidity or direct sunlight. Do not overexpose the instrument to dir ect sunlight, or place it near an air conditioner , or in any extremely hot place. Do not use near a TV or radio. This instrument can cause video or audio interfer ence with TV and radio reception.
A-1 Appendix 735A-E – 1 15A T one List Advanced T ones 0 PIANO STEREO GRAND PIANO 0 51 16 N RvbHall1 1 PIANO STEREO MELLOW PIANO 0 52 16 N GateRvb2 2 PIANO STEREO BRIGHT PIANO 1 50 16 N Equalize 3 P.
A-2 Appendix 735A-E – 1 16A 53 ORGAN CHAPEL ORGAN 19 51 32 N RvbHall2 54 ORGAN ACCORDION 21 48 16 N Reflect 55 ORGAN HARMONICA 22 48 32 N Reflect 56 ORGAN BANDONEON 23 48 16 N Reflect 57 ORGAN DRAWBAR ORGAN 1 16 48 32 N Reflect 58 ORGAN ELEC.
A-3 Appendix 735A-E – 1 17A 1 1 1 BASS CHORUS FINGERED BASS 33 49 16 – 1 Crn Cho 1 12 BASS COMP . PICKED BASS 34 49 16 – 1 CmpEnDly 1 13 BASS FLAN.
A-4 Appendix 735A-E – 1 18A 169 BRASS DEEP SYNTH-BRASS 1 62 51 16 N Enha Dly 170 BRASS SOFT SYNTH-BRASS 63 51 16 N Enha Dly 171 BRASS VINT AGE SYNTH-BRASS 63 48 16 N RvbHall2 172 BRASS TRUMPET 1 56 .
A-5 Appendix 735A-E – 1 19A 227 SYNTH-LEAD SQUARE LEAD 2 80 51 16 N ChoDly 2 228 SYNTH-LEAD VOX SQR LEAD 80 52 16 N ChoDly 4 229 SYNTH-LEAD CALLIOPE LEAD 82 48 16 N Equalize 230 SYNTH-LEAD CHIFF LEA.
A-6 735A-E – 120A Appendix Preset T ones 285 SYNTH-P AD W ARM VOX 89 50 16 N Equalize 286 SYNTH-P AD FLUTE P AD 89 51 16 N Equalize 287 SYNTH-P AD A TT ACK POL YSYNTH 90 50 16 N Equalize 288 SYNTH-P.
A-7 Appendix 735A-E – 121A 336 GM SLAP BASS 1 36 64 32 N – 337 GM SLAP BASS 2 GM 37 64 32 N – 338 GM SA W SYNTH-BASS 1 GM 38 64 16 N – 339 GM SQR SYNTH-BASS 1 GM 39 64 32 N – 340 GM VIOLIN G.
A-8 394 GM HALO SYNTH 94 64 16 N – 395 GM SWEEP 95 64 32 N – 396 GM RAIN DROP 96 64 16 N – 397 GM SOUND TRACK 97 64 16 N – 398 GM CRYST AL 98 64 16 N – 399 GM A TMOSPHERE 99 64 16 N – 400 .
A-9 452 V ARIOUS DETUNED CLEAN GT 27 65 16 N – 453 V ARIOUS PLAIN ELEC. GUIT AR REAR 27 66 32 N – 454 V ARIOUS PLAIN ELEC. GUIT AR FRONT 27 67 32 N – 455 V ARIOUS FEEDBACK GUIT AR GM 30 65 16 N – 456 V ARIOUS GUIT AR FEEDBACK 31 65 32 N – 457 V ARIOUS SAW SYNTH-BASS 3 38 67 16 N – 458 V ARIOUS RESO.
A-10 Drum Sets 500 DRUM ST ANDARD SET 1 0 120 501 DRUM ST ANDARD SET 2 1 120 502 DRUM ROOM SET 8 120 503 DRUM POWER SET 16 120 504 DRUM ELEC. SET 24 120 505 DRUM SYNTH SET 1 25 120 506 DRUM SYNTH SET .
A-11 32 DRA WBAR Overdrive Organ 4 32 96 10 N OvdRotry 33 DRA WBAR Drawbar Organ 5 33 96 10 N Rotary 34 DRA WBAR Gospel Organ 3 34 96 16 N Rotary 35 DRA WBAR 8 ’ + 4 ’ Organ 35 96 32 N Rotary 36 D.
A-12 Appendix 735A-E – 126A Drum Assignment List “ ” indicates the same sound as ST ANDARD SET . ➝ Key/ Note number PC0: ST ANDARD SET 1 — — — — — — HIGH Q SLAP SCRA TCH PUSH SCRA .
A-13 PC40: BR USH SET — — — — — — 씯 씯 씯 씯 씯 씯 씯 씯 JAZZ KICK 2 JAZZ KICK 1 씯 BRUSH T AP BRUSH SLAP BRUSH SWIRL 씯 씯 씯 씯 씯 씯 씯 씯 씯 씯 씯 씯 씯 씯 씯 .
A-14 No. Rhythm Name 8 BEA T 0 8 BEA T 1 1 8 BEA T 2 2 8 BEA T 3 3 8 BEA T POP 1 4 8 BEA T POP 2 5 8 BEA T POP 3 66 0 ’ S SOUL 7 8 BEA T DANCE 8 POP ROCK 1 9 POP ROCK 2 16 BEA T 10 16 BEA T 1 1 1 16.
A-15 Fingered Chord Chart dim m7 -5 M7 M m 7 m7 dim7 Chord Type Root C D E F G A B C /(D ) (D )/E F /(G ) (G )/A (A )/B * Y ou can use the above fingerings to finger chords within the accompaniment keyboard range.
A-16 aug sus4 C D E F G A B C /(D ) (D )/E F /(G ) (G )/A (A )/B m add9 7sus4 mM7 7 -5 add9 Chord Type Root Appendix 735A-E – 130A WK3000_e_A-01-16.
A-17 Appendix 735A-E-131A REVERB Effect List Effect List CHORUS Effect List DSP Effect List Settable parameters depend on the DSP type. Also, the parameters for each DSP type depend on the algorithm * associated with the DSP type. See the DSP Algorithm List on page A-19 for mor e information.
A-18 Appendix 735A-E-132A DSP Algorithm Display DSP Name No. ID Name DSP Algorithm Display DSP Name No. ID Name DSP Algorithm Display DSP Name No. ID Name Delay [14] 28 Delay Delay [15] 22 3T ap Dly 3.
A-19 735A-E-133A Appendix DSP Algorithm List 00 : Auto Pan ■ Function Continually performs left-right panning of the input signal in accordance with an LFO. ■ Parameters 0 : Rate (Range: 0 to 127) Adjusts the panning rate. 1 : Depth (Range: 0 to 127) Adjusts the panning depth.
A-20 Appendix 735A-E-134A 3 : Depth(Range: -64 to 0 to +63) Adjusts the depth of the wah in accordance with the level of the input signal. Setting a positive value causes the wah filter to open in direct pr oportion with the size of the input signal, producing a bright sound.
A-21 2 : Rate (Range: 0 to 127) Adjusts the rate of the LFO. 3 : Depth (Range: 0 to 127) Adjusts the depth of the LFO. 4 : W et Level (Range: 0 to 127) Adjusts the level of the effect sound. 1 1 : Rotary ■ Function This is a rotary speaker simulator .
A-22 ■ Parameters 0 : Rate1 (Fast LFO Rate) (Range: 0 to 127) Adjusts the rate of LFO1. 1 : Depth1 (Fast LFO Depth) (Range: 0 to 127) Adjusts the depth of LFO1. 2 : Rate2 (Slow LFO Rate) (Range: 0 to 127) Adjusts the rate of LFO2. 3 : Depth2 (Slow LFO Depth) (Range: 0 to 127) Adjusts the depth of LFO2.
A-23 ■ Parameters 0 : Delay T ime (Range: 0 to 127) Adjusts the delay time. 1 : W et Level (Range: 0 to 127) Adjusts the level of the effect sound. 2 : Feedback (Range: 0 to 127) Adjusts the repeat of the delay . 3 : High Damp (Range: 0 to 127) Adjusts damping of the high-range delay sound.
A-24 1 : T ime (Range: 0 to 127) Adjusts the reverb time. 2 : High Damp (Range: 0 to 127) Adjusts damping of the high-range reverb sound. The smaller the value, the greater the damp- ing of high-range reverb sound. 3 : ER Level (Range: 0 to 127) Adjusts the level of the initial reflection.
A-25 6 : Delay W et Level 7 : Delay Feedback M05 : Multi05 (Enhancer – 1-Phase Chorus) ■ Function This is a multi ef fector related to Enhancer - 1- Phase Chorus.
A-26 3 : Ring W et Level 4 : Ring Dry Level 5 : Chorus LFO Depth 6 : Delay T ime 7 : Delay W et Level M13 : Multi13 (Ring Modulator – Distortion) ■ Function This is a multi effector r elated to Ring Modu- lator - Distortion.
A-27 M20 : Multi20 (Phaser – 1-Phase Chorus – Auto Pan) ■ Function This is a multi effector that is r elated to Phaser - 1-Phase Chorus - Auto Pan.
A-28 M27 : Multi27 (LFO Wah – Distortion – 2-T ap Delay) ■ Function This is a multi effector that is r elated to LFO W ah - Distortion - 2-T ap Delay .
.
.
.
735A-E-146A Models WK-3500/WK-3000 MIDI Implementation Chart Version: 1.0 Function .. Transmitted Recognized Remarks Basic Default Channel Changed Default Mode Messages Altered Note Number: True voice.
735A-E-147A Mode 1 : OMNI ON, POLY Mode 2 : OMNI ON, MONO O : Yes Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO X : No 72 73 74 76 77 78 80 81 82 83 91 93 98, 99 100, 101 120 120 Program Change :Tru.
42-4 062 06A03 P r i n t e di nC h i n a Limited One-Year W arranty This product is warranted by Ra dioShack against manufa cturing defects in material and workman- ship under normal use for one (1) y ear from the date of pur chase from RadioSha ck company-owned stores and authorized RadioShack franchi sees and dealers.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Radio Shack 735A-E-002A è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Radio Shack 735A-E-002A - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Radio Shack 735A-E-002A imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Radio Shack 735A-E-002A ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Radio Shack 735A-E-002A, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Radio Shack 735A-E-002A.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Radio Shack 735A-E-002A. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Radio Shack 735A-E-002A insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
