Manuale d’uso / di manutenzione del prodotto 4-CHANNEL STEREO SSM-1750 del fabbricante Radio Shack
Vai alla pagina of 16
Owner’s Manual Please read before using this equipment. SSM-1750 4-Channel Stereo Audio Mixer 32-3008.fm Page 1 Thursday, April 6, 2 000 4:03 PM.
2 ˆ Contents Features ........... .............. .............. .............. ................. .............. .............. .............. ...... ........ .... 4 Preparation ......... .............. .............. .............. .............. ...
3 Care ............ .............. .............. .............. .............. ................. .............. .............. ......... .. ... ... ..... 14 Replacing the Fuse ................ ... .. .............. .............. ... .............. .
4 Features ˆ Features Your RadioShack 4-Channel Stereo Audio Mi xer is a sophisticated control ce nter, perfect for mixing sound from multiple playback sources such as a microphone, tun er, CD player, turnta- ble, or the audio output from a VCR.
5 Features 9 Assign Contro ls— let you select the in- put sources to be mixed. 10 CROSS F ADER — lets you smoothly switch between two input sources. 11 SOUND EFFECT — let you crea te a spe- cial sound performance using the six preprogrammed sound effects.
6 Preparation ˆ Preparation PRESETTING THE CONTROLS Warning: A sudd en high output from the mixer could damage your hearing, especially if you use headphones, and might also dam- age the audio devices connected to the mix- er's output.
7 Operation Connecting Microphones You can connect two microphones (not sup- plied) to the mixer. Connect a microphone wi th an XLR plug to DJ MIC on the top panel’s upper left corner. Connect a microphone with a 1 / 4 -inch (6.35 mm) plug to AUX MIC on the back panel’s lower right corner.
8 Operation 6. After you finish mixing, turn down the volume on the output audio device s, turn off the input and output audio devices (amplifiers, tape decks, and so on), then press POWER so it pops up to turn off the mixer . The POWER indicato r turns off.
9 Operation Notes: • If it was necessary to set the channel volume level sl ide control to 10 to get a reading of up to 0 on the VU meter , then slide it down to about 8 and adjust the GAIN control to get a reading of up to 0 on the VU meters. (See “Using Gain ” on Page 1 1.
10 Operation Important: No te the AUX LEVEL setting, so each time you wan t to mix that source you can set the control to the correct setting. Notes: • If it was necessary to set the AUX LEVEL contr.
11 Operation 4. Set the desired channel vo lume level slide control to the preset posi tion. 5. Adjust CUE LEVEL to a comfortable lis- tening level. 6. Start playback of the in put source you want to play next through your sound system. 7. Set the input device to the desired sec- tion of music, th en stop or pa use the input device.
12 Operation Note: We recommend you not adjust the GAIN controls after you have preset the in- puts as some sound imbalance could occur. Setting the Sound Balance BALANCE lets you adjust th e sound balance between the left and right speakers.
13 Operation The echo is applie d to the sound be fore all the inputs are mixed. Set ECHO to MIC to turn on the ec ho effect for the microphones and the AU X LINE input. Set ECHO to MUSIC to turn on the echo effect for Channels 1, 2, 3, and 4 outputs.
14 Care ˆ Care To enjoy your mixer for a long time : • Keep the mixer dry . If it gets wet, wipe it dry immediately . • Use and store the mixer only i n normal temperature environmen ts. • Handle the mixer gently and carefully . Do not drop it.
15 Specifications ˆ Specifications Input Sensitivity/Impedance DJ MIC (XLR jack) ............................................................. 1.5 mV , 600 ohms, Balanced/Unbalanced AUX MIC (Phone jack) ...............................................
32-3008 04A00 Printed in China RadioShack A Division of Tandy Corporation Fort Worth, Texas 76102 Limited One-Y ear W arranty This product is warranted by RadioShack against manufacturing def ects in .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Radio Shack 4-CHANNEL STEREO SSM-1750 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Radio Shack 4-CHANNEL STEREO SSM-1750 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Radio Shack 4-CHANNEL STEREO SSM-1750 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Radio Shack 4-CHANNEL STEREO SSM-1750 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Radio Shack 4-CHANNEL STEREO SSM-1750, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Radio Shack 4-CHANNEL STEREO SSM-1750.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Radio Shack 4-CHANNEL STEREO SSM-1750. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Radio Shack 4-CHANNEL STEREO SSM-1750 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
