Manuale d’uso / di manutenzione del prodotto StrideClimber 831.23745.0 del fabbricante ProForm
Vai alla pagina of 28
CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Keep this manu- al for future reference. Serial Number Decal (under frame) Model No. 831.23745.0 Serial No. Write the serial number in the space above for reference.
T ABLE OF CONTENTS W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 W ARNING: T o reduce the risk of serious injury , read all important precautions and instructions in this manual and all warnings on your elliptical exerciser before using your elliptical exerciser . Sears assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
4 BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM ® XP STRIDECLIMBER 600 elliptical exerciser . The XP STRIDECLIMBER 600 elliptical exerciser provides a wide array of features designed to make your work- outs at home more effective and enjoyable.
5 ASSEMBL Y Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included hex keys, assembly requires a Phillips screwdriver , an adjustable wrench , and a rubber mallet .
6 1. While a second person tips the Frame (2) backward, attach a Wheel (25) to each side of the Frame with an M10 x 35mm Shoulder Screw (94). 2. Carefully tip the Frame (2) onto its side. Orient the Base (1) as shown, and then insert the Base into the Frame.
7 3. Identify the Right Roller Leg (21) and the Right Pedal Leg (16), which are marked with “R” stick- ers. Orient the Right Roller Leg and the Right Pedal Leg as shown.
8 6. Attach the Center Frame Cover (27) to the Base (1) with six M4 x 12mm Flange Screws (73). 6 27 1 73 73 73 5. Apply a small amount of grease to the axle on the right Crank Arm (36) and to a Wave W asher (93). Then, slide the W ave Washer onto the Crank Arm.
9 8. Have a second person hold the Upright (6) near the Frame (2) as shown. Pull the Wire Harness (48) out of the Frame (2) and insert it upward through the Upright (6). Tip: Use a piece of tape or an elastic band to hold the Wire Harness in place until step 14.
10 1 1. Orient an Inner Handlebar Cover (18) and an Outer Handlebar Cover (19) around the Right Handlebar (9) as shown. Attach the Outer Handlebar Cover (19) with an M4 x 16mm Flange Screw (84). Then, attach the Inner Handlebar Cover (18) with two M4 x 16mm Self-tapping Screws (79).
11 13. The Console (5) can be operated with four 1.5V “D” batteries (not included); alkaline batteries are recommended. IMPORT ANT : If the elliptical exerciser has been exposed to cold temper- atures, allow it to warm to room temperature before inserting batteries into the Console.
12 16. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. T o protect the floor or carpet from damage, place a mat under the elliptical exerciser . 15 15. Apply a generous amount of grease to a Pedal Leg Axle (32).
13 HOW T O USE THE ELLIPTICAL EXERCISER HOW TO MOVE THE ELLIPTICAL EXERCISER Due to the size and weight of the elliptical exercis- er , moving it requires two persons. Stand in front of the elliptical exerciser , hold the upright, and place one foot against one of the front wheels.
14 HOW TO ADJUST THE SELECTOR The pedals on the elliptical exerciser move your feet in a natural elliptical path. Y ou can adjust the selectors on the elliptical exerciser so that the pedals move in a more vertical path or a more horizontal path.
15 FEA TURES OF THE CONSOLE The advanced console offers an array of features designed to make your workouts more effective and enjoyable. When you use the manual mode of the console, you can change the resistance of the pedals with the touch of a button.
16 HOW TO USE THE MANUAL MODE Note: If there is a sheet of clear plastic on the face of the console, remove the plastic. 1. Begin pedaling to turn on the console. A moment after you turn on the console, the dis- plays will light. 2. Select the manual mode.
17 5. Measure your heart rate if desired. If there are sheets of clear plastic on the metal contacts on the handgrip pulse sen- sor , remove the plas- tic. T o measure your heart rate, hold the handgrip pulse sensor with your palms resting against the metal con- tacts.
18 HOW TO USE A WEIGHT LOSS WORKOUT 1. Begin pedaling to turn on the console. See step 1 on page 16. 2. Select a weight loss workout. T o select one of the four weight loss workouts, press the Enter/Exit button repeatedly until the name of a WEIGHTLOSS workout appears in the upper display .
19 HOW TO USE A PRESET WORKOUT 1. Begin pedaling to turn on the console. See step 1 on page 16. 2. Select a preset workout. T o select one of the eight preset workouts, p ress the Enter/Exit button repeatedly until the name of a WORKOUT appears in the upper display .
Inspect and tighten all parts of the elliptical exerciser regularly . Replace any worn parts immediately . T o clean the elliptical exerciser , use a damp cloth and a small amount of mild soap. IMPORT ANT : T o avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight.
21 These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember , proper nutrition and adequate rest are essential for successful results.
22 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. T oe T ouch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
23 1 1 Base 2 1 Frame 3 2 Outer Crank Arm Cover 4 2 Inner Crank Arm Cover 5 1 Console 6 1 Upright 7 2 Roller Cover 8 1 Left Handlebar 9 1 Right Handlebar 10 2 Handlebar Endcap 1 1 2 Handlebar Leg 12 1.
24 91 4 M4 x 65mm Screw 92 1 M4 x 12mm Screw 93 8 W ave W asher 94 2 M10 X 35mm Shoulder Screw 95 3 M8 x 16mm Button Screw 96 6 M8 Nylon Locknut 97 2 M10 x 62mm Button Bolt 98 2 Selector Axle Cap * – Hex Key * – Grease Packet * – User ’s Manual Specifications are subject to change without notice.
25 EXPLODED DRA WING A—Model No. 831.23745.0 R1007A 89 71 96 84 81 80 18 19 41 79 93 41 8 10 11 87 88 88 14 13 33 33 93 37 28 93 33 33 41 41 42 82 85 7 12 22 24 34 35 41 82 82 83 83 93 30 54 60 80 8.
26 23 48 64 73 68 67 51 5 6 65 17 1 26 79 74 74 66 3 95 95 95 17 77 77 86 86 86 36 75 38 44 45 47 43 2 44 47 57 39 36 38 75 70 70 3 66 74 74 40 47 52 96 96 94 58 20 47 53 61 73 50 59 79 62 56 4 4 63 20 85 85 69 25 25 97 78 72 76 92 27 73 73 73 94 55 55 90 79 91 EXPLODED DRA WING B—Model No.
27 11 18 19 33 33 41 79 79 80 81 93 15 31 31 30 32 33 33 54 60 7 21 22 24 35 41 41 41 41 42 82 83 83 82 82 82 80 80 80 88 83 81 88 87 9 10 29 84 71 96 41 93 93 86 79 79 79 79 16 85 93 34 98 49 46 89 83 83 83 EXPLODED DRA WING C—Model No.
Part No. 254219 R1007A Printed in China © 2007 ICON IP , Inc. Y our Home For repair— in your home —of all m ajor br and app liances , lawn an d garden equipm ent, or heat ing an d coo ling s yste.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il ProForm StrideClimber 831.23745.0 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del ProForm StrideClimber 831.23745.0 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso ProForm StrideClimber 831.23745.0 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul ProForm StrideClimber 831.23745.0 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il ProForm StrideClimber 831.23745.0, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del ProForm StrideClimber 831.23745.0.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il ProForm StrideClimber 831.23745.0. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo ProForm StrideClimber 831.23745.0 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
