Manuale d’uso / di manutenzione del prodotto WNL-9330 del fabbricante Planet Technology
Vai alla pagina of 61
802.1 1n W ireless PCI Adapter WNL-9330 User ’ s Manual V ersion: 1.00 Date: December 2007.
Copyright Copyright © 2007 by PLANET T echnology Corp. All rights reserved. No part of this publication may be reproduced, tran smitted, transcribed, stored in a retrieval system, or translated into .
equipment. This device complies with Part 15 of the FCC Ru les. Operation is subject to the Following two conditions: ( 1 ) This device may not cause ha rmful interference, and ( 2 ) this Devi ce must accept any interference received, including in terference that may cause und esi red operation.
municipal waste and have to co llect such WEEE sep arately . Revision User ’s Manual for PLANE T 802.1 1n Wireless P CI Adapter Model: WNL-9330 Rev: 1.
T able of Content s Chapter 1: Intr oduction ................................................................................... 6 1-1 Features ......................................................................................................... 6 1-2 Safety Information .
Chapter 1: Introduction Complying with the most innovative 802.1 1n te chnology , PLANET delivers a reliable and cost effective solu tion - WNL-9330. WNL-9330 is a PCI 2.2 wireless adapter whi ch integrates one transmit channel and two concurrent receive chan nels; thus, it supp ort s up to 150Mbp s uploa d and 300Mbp s download data rate.
1-2 Safety Information In order to keep the safety of users and your pr operties, plea se follow the safety instructions: 1. This PCI wireless n etwork card is designed for indoor use only . DO NOT exp ose this network card to direct sun light, rain, or snow .
1-3 S pecification Interface Complaint with PCI 2.2 st a ndard S tandards Conformance Compliant with 802.1 1b / 802.1 1g / 802.1 1n (draft 2.0) Data Rate IEEE 802.
1-4 Package Contents Before you begin the inst allation, please che c k the items of your pa ckage. The packag e should include the following items: 1 x WNL-9330 PCI 1 x Driver and User's manual CD 1 x Quick Inst allation Gui de 2 x Antenna If any of the above items is missing, contact your supplier as soon as pos sible.
Chapter 2: Inst allation 2-1 Hardware Installation Please follow the instructions to inst a ll your new PCI wireless net work card: 1. SWITCH THE COMPUTER OFF , remove the cover and insert th e wireless network card into an empty PCI slot of your computer .
4. T o improve radio reception, please adjust antennas to the positio n shown in the picture. Rear V iew T op View 2-2 Utility Installation Note 1: If you had ever inst alled a nother Wirel ess Cards before, ple ase uninst all the existed drivers and utilities first.
message. Click “Cancel” to ski p. 2. Insert the bundled CD into the CD-ROM dr ive to launch the auto run program. Once completed, a menu screen will appear. 3. Click the “WNL-9330 Utility” hyperlink to initiate the install wizard. 4. Read the License Agreement carefully .
6. There are two wireless perfor mance mode you can select here: Optimize for WiFi mode or Optimize for performance mode If you want to enhance wireless performance, plea se select ‘Optimize for perf ormance mode’. However , wireless comp atibility is not guaranteed in thi s mode.
7. Click “Install ” to begin the i nstallation..
8. Please click “Finish” to finish the inst allation..
Chapter 3: General Configuration The Configuration Utility appears as an icon o n the system tray of Windows while the card is running. Y ou can open the utility by double-click on the icon. Right click the icon; there are some items for you to operate the configuration utility .
Parameter Description Profiles List The profiles list display all t he profiles and the relative setting s of the profiles including Profile Name, SSID, Channel, etc. This sign indicates the activated profile is been connecting. This sign indicates the acti vated profile i s not been connecting.
And you can set the param eter for this profile here:.
Parameter Description Profile Name Define a recognizable profile name for you to identify the dif ferent networks. SSID The SSID (up to 32 print able ASCII characters) is the unique name identified in a WLAN. The ID prevent s the unintentio nal merging of two co-located WLANs.
station in the Wireless LAN network with out through an Access Point or Router . Preamble The preamble defines the length of the CRC blo ck for communication among wireless devices. This o ption is only active in the Ad Hoc network. There are two modes including Auto and Long Preamble.
Parameter Description Authentication T ype This setting has to be consi stent with the wireless networks that the card intends to connect. Open – No authentication is needed among the wi reless network. Shared – Only wireless devices using a sha red key (WEP Key identified) are allowed to connecting each other .
WP A-PSK – It is a special mode designed for home and small busi ness users who do not have access to network aut hentication servers. In this mode, known as Pre-Shared Key , the user man ually enters t he startin g passwo rd in their access point or gateway , as well as in each wireless st ation in the network.
encryption key from Key 1 to Key 4 by selected the radio button. Fill the text box by following the rules below . 64-bit – Input 10-digit Hex values (in the “A -F ”, “a-f” a nd “0-9” range) o r 5-digit ASCII characters (including “a-z” and “0-9”) as the encryption keys.
only activate a profile a time, and the profile which is activated currently will have a green check ( ) before its name. If the wireless a ccess point is not rea chabl e, a red check ( ) will be displayed before it s name.
PEAP &TTLS – PEAP and TTLS are similar and easier than TLS in that they specify a stand-alon e authentic ation protocol be used with in an encrypted tunnel. TTLS support s any prot ocol within it s tunnel, including CHAP , MS-CHAP , MS-CHAPv2, P AP and EAP-MD5.
3-1-3 Using 802.1x - CA Server If you want to use CA server , please click ‘CA Server ’ tab. And the following message will be displayed: Parameter Description Use Certificate Chain When the EAP a.
Server name must match exactly When selected, the server name must match exactly the serve r name found on the certificat e. Domain name must end in specified name When selected, the server name fiel d identifies a domain. The certificate must use a server name b elonging to this domain or t o one of its sub-do mains (e.
Parameter Description Available Net works This list shows all avail able wireless networks within range of your card. It also displays the information of the networks in cludi ng the SSID, BSSID, Signal S trength, Channel, Encryption, Authentication and Network T ype.
access point. Authentication type is selected automatically , please don’t change it. If the access point you selected doe s n ot enable e ncryption and d oes not require authentication, please skip this step.
3-3 V iew Network Link S tatus and S t atistics The configuration utility provides informat ion about net work statistics and lin k st atus. 3-3-1 Link S tatus.
Parameter Description S tatus Display the SSID and MAC ID of t he network the card is connecting to. Extra Info Display the link status. Channel Display the number of the radi o channel and the frequency use d for the networking. Link S peed (Mbps) Display the transmissi on and reception rate of the network.
better the quality . dBm If you want to know the signal strength in the unit of dBm, select this check box. Signal S trength This bar shows the signal st rength level. The higher percent age shown in the bar , the more radio signal been received by the card.
3-4 Advanced Settings Parameter Description Wireless Mode 802.1 1 B/G/N mix – If you have a mix of 802.1 1b, 802.1 1g, and 802.1 1n wireless st ations in your network, It is to maximize wireless compatibility with wireless access p oints and other wireless devices.
Wireless Protection If you have a mix of 802.1 1b and 802.1 1g wireless st ations in the n etwork, it is recommended to enable the protection mech anism. This mechanism can decrease the rate of data colli sion between 802.1 1b and 802.1 1g wireless st ations.
T urn on CCKM During normal operation, LEAP-enabled client devices mutually authenticate with a new access point by performing a complete LEAP authentication, including communicatio n with the main RADIUS server .
3-5 QoS Setting This wireless network card provide s QoS (Qualit y of Service) function, which can improve the performance of cert ain network applications, like audio / video streaming, network telephony (V oIP), and others.
WMM - Power Save Enable Enable WMM power saving mode to save energy and let s your battery live longer . Setting... Click this button to select the WMM dat a type which will suppress the function of power saving. When this kind of data is transferring, power saving functi on will be disabled.
Click ‘WPS Configuration’ tab, and the following settings will appear: 3-6-1 WPS Setup - PBC (Push-Button Configuration) 1.Set ‘Config Mode’ to ‘Enrollee’, and then push the ‘WPS’ butt.
2. Before you start to est ablish the wireless connection by using WPS, you can click ‘Rescan ’ button to search for WPS -enabled access point s near you, to make sure the WPS function of your access point is activated.
3. All access points found will be di splayed. Pl ease make sure th e access point you wish to connect is displayed. If not, please click ‘Res can’ few more times. Y ou can also click ‘Information’ button to see the detailed information about sele cted access point.
Sometime WPS may fail, and you can click ‘PBC’ button few more times to try again. When an access point is connected, you c an click ‘Dis connect ’ to disconnect your wireless netwo rk card fr.
If you want to delete a found access point from the list, select it and click ‘Delete’ button. 3-6-2 WPS Setup - PIN The PIN number of your WNL-9330 is an eight-dig it number located at the uppe r-right position of configuration utility .
Click ‘PIN’ button now , and wait for few seconds to one minute. If a wireless acces s point with correct PIN code is found, you’ll be connected to that access p oint:.
.
Y ou may have to click ‘PIN’ for few more times to try again. If you still can not connect to access point by this way , please make sure the PIN code you provided to access point is correct.
3-7 About By choosing this option, you can click the hyper link to conn ect the PLANET website. You can also obtain basic information about the WN L-9330 such as the Driver, Utility and EEPROM Version. The MAC Address of the card i s displayed in the screen a s well.
Chapter 4: Sof t-AP Function Except becoming a wireless client of other wi reless access points, the WNL-93 30 can a ct as a wireless service provider also! Y ou can swit ch the WNL-9330’s ope ratin.
If your computer has a nother n etwork ca rd which is co nnected to Int ernet, please sele ct it from ‘Name’ dropdown menu, and click ‘Enable ICS’; if your computer does not hav e another network card with Internet connection, please click ‘ Not enable ICS’.
Parameter Description SSID Please input the SSID (the name used to identify this wireless access point) here. Up to 32 numerical charact ers can be accepted here, ex cepting space. Channel Please select the wirel ess channel you wish to use. The num ber of channels available here will vary d epends on the setting of ‘Country Region Code’.
Use MAC Address Click this b utton to use the MAC address of the wireless ca rd as SSID. A prefix of ‘AP’ will be added. Security Setting Set the security opti ons (w ireles s data encryp tion).
Default Click this button to restore a ll settings in this page back to default value. Apply Click this button to activate c urrent settings. T o exit, click ‘X’ button at the upper-ri ght corner of configuration window .
Encryption T ype Please select an encryptio n mode. The available options in this setting item will vary depending on th e authentication type you select. If you select ‘Not Us e’, data will not be encrypted and people with some netwo rking knowledge will be able to read the data you transfer with pro per tool.
Click ‘Access Control’ tab, and the following messages will appea r: Parameter Description Access Policy Select the policy type of your access rule: Disable: Allow any wireless client with proper authentication settings to connect to this access poin t.
Add A dd the MAC address you inputted in ‘MAC address’ field to the list. Delete Please select a MAC address from the l ist, then click ‘Delete’ button to remove it. Remove all Delete all MAC addresses in the list. Apply Save and apply changes you made.
Parameter Description MAC address Displays the MAC add ress of this wireless client AID The serial number of this wirel ess connection. Power Saving Mode Displays the capability of power-s aving function of this wireless client.
4-5 Event Log This software access poi nt will log all wireless-related activities as a log. Y ou can follow the instructions to view the content of the event log: Click ‘Event Log’ tab, and the event log will be displayed: Y ou can click ‘Clea r’ to rem ove all entries in the log.
4-6 S tatistics If you want to know detaile d informatio n about ho w your softwa re access point works, you can follow the following instructions to view t he statistics of the acce ss point: Click ‘S tatistics’ tab, and t he event log will be displayed: Y ou can click ‘RESET COUNTERS’ button to reset all counters to zero.
CHAPTER 5: APPENDIX 5-1 T roubleshooting This chapter provides solutions to probl ems usually encountered durin g the installatio n and operation of the adapter . Q. The PLANET WNL-9330 does not w ork properly . A. 1. Right click on My Computer and select Prope rties.
might be necessary to set up one client to es t ablish a BSS (Basic Service Set) and wait briefly before setting up other cli ents. Thi s prevent s several client s from trying to establish a BSS at the same time, which can result in multiple singular BSSs being established, rather than a single BSS with multiple client s associ ated to it.
then present this value to the owner of acce ss point so he / she can add the MAC addre ss of your network card to his / her access point’ s list. Q. The network is slo w / having problem when transferring large files A. 1. Move closer to the place where access point is located.
copies of dat a by multiple antenn a, to improve data transfer performance. By using multiple antennas, not only data transfer rate is impr oved, but also the wireless stability .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Planet Technology WNL-9330 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Planet Technology WNL-9330 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Planet Technology WNL-9330 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Planet Technology WNL-9330 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Planet Technology WNL-9330, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Planet Technology WNL-9330.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Planet Technology WNL-9330. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Planet Technology WNL-9330 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
