Manuale d’uso / di manutenzione del prodotto VR805/07 del fabbricante Pioneer
Vai alla pagina of 24
Congratulations on the purchase of one of the most sophisticated and simple-to-use video recorders (VCR) on the market. With this VCR you can record and play VHS-standard cassettes. Please take the time to read this operating manual before using your video recorder.
Important for the United Kingdom This apparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug proceed as follows: a Remove fuse cover and fuse. b Fix new fuse which should be a BS1362 3A, A.S.T.A. or BSI approved type.
Connecting with scart cable without ’Easy Link/NexTView’ If your television does not have a scart (EURO-AV) socket, please do not read further here , but turn to the next paragraph ’Connecting without scart cable’. a Remove the aerial cable plug from your TV set and insert it into the 2 socket at the back of the video recorder.
Autoinstall The video recorder will search for all TV channels. It stores TV channels found in the following sequence: BBC 1, BBC 2, ITV, CH 4, CH 5, SKY, others. Initial Installation a If the aerial (antenna) has been connected to the video recorder, press the OK button.
k Repeat steps h to j until all TV channels have been allocated. l To finish, press the MENU button. Connecting a decoder or additional equipment You can also connect additional equipment to the AV2 EXT2 socket. For instance: decoder, satellite receiver or camera recorder.
E If you don’t know the frequency or channel of the TV channel of your choice, press the menu button P to start the channel search. g In the line ’PROGRAMME NUMBER’ select the pro- gramme number you want e.g.: ’01’, using the menu buttons Q or P .
Setting the clock and the date If the time in the video recorder display is not correct or if ’--:--’ appears in the display, please set the clock manually. a Switch on the TV set. If required, select the programme number for the video recorder. b Press the MENU button.
Playback a cassette a Insert a cassette into the cassette slot. b Press the PLAY G playback button. c To stop, press the STOP h button. d To eject, Press the STOP/EJECT ? button on the set. D Some hired cassettes may have a poor picture/sound quality.
Automatic search for tape position (Index search) At the beginning of each recording, the video recorder marks the tape with a index code mark. a Press the INDEX E button. Then press the I button to select the next code mark or the H button for the pre- vious code mark.
Recording without automatic switch-off a Insert a cassette. b Use the P ; or P = button to select the programme number (programme name) from which you wish to record. D When the function ’Direct record’ is switched on, select the programme number on the TV set.
Automatic recording from a satellite receiver (SAT RECORDING) You can only use this function, when you have a satellite receiver, which can control other equipment by a ’program- ming’ function. a Switch on the TV set. If required, select the programme number for the video recorder.
The video recorder needs the following information for every programmed recording: * the date on which the recording is to be made * the programme number for the TV channel * the start and stop time of the recording * VPS/PDC on or off * the recording speed (SP/LP) The video recorder stores all the information mentioned above in a TIMER block.
i Please note that you inserted a cassette without erase protection. Switch off with the STANDBY m button. The programmed recording will only function when the video recorder is switched off with the STANDBY m but- ton. D If one or more of the TIMER blocks are occupied, ’ k ’ lights up in the display.
How to check or alter a TIMER a Switch on the TV set. If required, select the programme number for the video recorder. b Press the TIMER s button on the remote control. The programming mode selected last is marked. c Select the line ’TIMER LIST’ with the menu buttons P = or P ; and confirm with the P button.
Changing the TV system If you play back recordings made on another video recorder, the automatic TV system switch-over may lead to colour interferences. a Switch on the TV set. If required, select the programme number for the video recorder. b Press the MENU button.
How to switch to 16:9 You can only use this function, when the video recorder (socket AV1 EXT1 ) and the TV set are connected with a scart cable. a Switch on the TV set. If required, select the programme number for the video recorder. b Press the MENU button.
d Select the line ’AUTO STANDBY’ with the menu buttons P = or P ; . e Select ’ON’ with the menu buttons Q or P . If you se- lect ’OFF’, the function will be switched off. f Confirm with the OK button. g To end, press the MENU button. D A TIMER recording only functions when the video recorder is switched to standby .
D With the function ’Easy Link/NexTView’ the modulator will be switched off automatically. a Switch on the TV set. If required, select the programme number for the video recorder. b Please note that no cassette has been inserted. Press the STOP/EJECT ? and the PLAY G button simultaneous- ly for several seconds until e.
Audio dubbing This function enables you to replace (dub) the sound track of an existing recording with another sound track. To do this, connect an audio source (e.g.: a CD-player) to the L-AUDIO-R (programme number ’E3’) socket. a Switch on the TV set.
f Switch the camera recorder to ’still picture’ (playback- pause). g Confirm with the menu button P . The video recorder now controls the connected camera recorder type.
Before you call an engineer If, contrary to expectation, you experience any difficulty in operating this video recorder, it may be caused by one of the reasons mentioned below. You can also call the customer service in your country. You will find the telephone numbers in the enclosed guarantee leaflet.
Acura 02 GoldStar 15, 20, 27 Proline 31 Adyson 20 Goodmans 07, 10, 20, 29, 36 Protech 02, 12, 20, 23, 25, 38 Akai 18, 33 Gorenje 35 Quelle 03, 04, 33 Akura 21, 25 Graetz 33 Questa 07 Alba 02, 07, 21 G.
The remote control EJECT J Eject : Eject casette STANDBY m Switch off : Switch off set, interrupt function, interrupt TIMER-recording CHILD LOCK u Child lock : Switch child lock on/off CLEAR (CL) Dele.
Front of the set STANDBY m Standby : Switch off, interrupt menu function, interrupt TIMER-recording RECORD n Record : Record the programme selected at this moment PROGRAMME ; Programme number Plus : P.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pioneer VR805/07 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pioneer VR805/07 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pioneer VR805/07 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pioneer VR805/07 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pioneer VR805/07, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pioneer VR805/07.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pioneer VR805/07. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pioneer VR805/07 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
