Manuale d’uso / di manutenzione del prodotto PRO-1000HDI del fabbricante Pioneer
Vai alla pagina of 48
Operating Instructions PLASMA DISPLAY PRO-1000HD I PRO-800HD I Register Y our Pr oduct on www .pioneerelectr onics.com.
ii PRO-1000HD I / PRO-800HD I Safety Precautions IMPOR T ANT NOTICE The serial number for this equipment is located on the rear panel. Please write this serial number on your enclosed warranty card and keep it in a secure area. This is for your security .
iii PRO-1000HD I / PRO-800HD I Safety Precautions Safety Precautions GROUNDING OR POLARIZA TION ÷ If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way .
iv PRO-1000HD I / PRO-800HD I Safety Precautions iii FEDERAL COMMUNICA TIONS COMMISSION DECLARA TION OF CONFORMITY This device complies with part 15 of the FCC Rules.
1 PRO-1000HD I / PRO-800HD I Before Proceeding Safety Precautions ................................. i Before Proceeding ................................. 2 How to Use This Manual ......................................... 2 Checking Supplied Accessories .
2 PRO-1000HD I / PRO-800HD I Before Proceeding How to Use This Manual This manual is set up to follow the course of actions and operations in the order that would seem most logical for someone setting up this unit.
3 PRO-1000HD I / PRO-800HD I Before Proceeding Checking Supplied Accessories Check that the following accessories were supplied. 1 Power cord 2 Remote control unit 3 AA (R6) batteries (x 2) 4 Cleaning.
4 PRO-1000HD I / PRO-800HD I Part Names and Functions Main Unit Main unit 1 ST ANDBY/ON indicator This indicator is red during standby mode, and turns to green when the unit is in the operation mode (page 22). Flashes green when Power -Management function is operating (page 26).
5 PRO-1000HD I / PRO-800HD I Part Names and Functions Remote Control Unit 1 SCREEN SIZE button Press to select the screen size (page 24). 2 INPUT buttons Use to select the input (page 22). 3 MENU button Press to open and close the on-screen menu (pages 18 to 34).
6 PRO-1000HD I / PRO-800HD I Part Names and Functions Connection Panel The connection panel is provided with four video input terminals and two video output terminals. Audio input and speaker output terminals are also provided, together with a CONTROL IN/OUT connector for connecting to PIONEER components bearing the Î mark.
7 PRO-1000HD I / PRO-800HD I Part Names and Functions Part Names and Functions 9 AUDIO INPUT (Stereo mini jack) Use to obtain sound when INPUT1 or INPUT2 is selected. Connect the audio output terminal of components connected to INPUT1 or INPUT2 to this unit (page 15).
8 PRO-1000HD I / PRO-800HD I Installation and Connections Installation of the Unit 7 Optional line (sold separately) (For details, please consult the dealer where this unit was purchased.) 1 T able top stand : PRO-1000HD I / PRO-800HD I display stand.
9 PRO-1000HD I / PRO-800HD I Installation and Connections Installation and Connections Connection to INPUT1 and INPUT2 V arious components can be connected to the INPUT1 and INPUT2 terminals. After connections are made, on-screen setup is necessary to match the characteristics of the connected component.
10 PRO-1000HD I / PRO-800HD I Installation and Connections Connection of G ON SYNC analog RGB source Make G ON SYNC connections for a component with output that has the synchronization signal layered on top of the green signal. When connecting to INPUT1 On screen setup is necessary after connection.
11 PRO-1000HD I / PRO-800HD I Installation and Connections Installation and Connections Connection to a personal computer Connection method differs depending on the computer type. When connecting, please thoroughly read the computer ’ s instruction manual.
12 PRO-1000HD I / PRO-800HD I Installation and Connections Connection of G ON SYNC analog RGB source Make G ON SYNC connections for a personal computer with output that has the synchronization signal layered on top of the green signal. When connecting to INPUT1 ANALOG RGB (ANALOG RGB) INPUT1 OUTPUT On screen setup is necessary after connection.
13 PRO-1000HD I / PRO-800HD I Installation and Connections Installation and Connections Connection to INPUT4 Connect an A V component that has a video output terminal to the INPUT4 terminal. Connection to INPUT3 Connect an A V component that has S-video output terminal to the S-VIDEO input terminal.
14 PRO-1000HD I / PRO-800HD I Installation and Connections Connecting the speakers This unit is equipped with a 2W+2W internal amplifier . If speakers are to be connected to the unit, following the accompanying connection instructions.
15 PRO-1000HD I / PRO-800HD I Installation and Connections Installation and Connections Audio connection for component connected to INPUT4 Audio input to the AUDIO INPUT4 terminals (pin jacks (L/ R)) is possible for a component connected to INPUT4.
16 PRO-1000HD I / PRO-800HD I Power Cord Connection Connect the power cord after all component connections have been completed. 1 Connect the power cord to this unit. 2 Plug the power cord into a power outlet. CAUTION ÷ Use only the power cord provided.
17 PRO-1000HD I / PRO-800HD I Installation and Connections 1 Organize cables together using the provided speed clamps. Insert 1 into an appropriate hole on the rear of the unit, then snap 2 into the back of 1 to fix the clamp. Speed clamps are designed to be difficult to undo once in place.
18 PRO-1000HD I / PRO-800HD I Setting Up the System 6 Press 5 / ∞ to select SETTING, then press SET . SELECT ENTER EXIT SET MENU IN P U T L E B LA : V ID E O V ID E O : R GB : A UT O SETT I N SI G N.
19 PRO-1000HD I / PRO-800HD I Setting Up the System Setting Up the System CLAMP POSITION setup Depending on the signal, analog RGB signals may result in the screen image appearing with a whitish or greenish cast. In such cases, set “ CLAMP POSITION ” to LOCKED.
20 PRO-1000HD I / PRO-800HD I Setting Up the System VIDEO SIGNAL This function allows you to switch the input signal format to automatic or manual when inputting the digital signal. Note VIDEO SIGNAL setting is possible only when INPUT5 is selected. 1 Press MENU to display the menu screen.
21 PRO-1000HD I / PRO-800HD I Setting Up the System Setting Up the System 3 Press 5 / ∞ to select SIGNAL RANGE. SELECT CHANGE EXIT SET MENU : IN P U T L E B LA OF F AUT O P O W ER : O FF DIGIT A L N.
22 PRO-1000HD I / PRO-800HD I Selecting an Input Source This section explains the basic operation of this unit. Outlined on the following pages is how to turn the main power on and off, put this unit in the operation or standby mode and how to select connected components.
23 PRO-1000HD I / PRO-800HD I Operations Operations T o adjust the volume VOLUME +/ – Press VOLUME on the remote control unit. Use VOLUME + or VOLUME – to adjust the volume of the connected speakers. : 5 VO LUM E T o mute the sound MUTING Press MUTING on the remote control unit.
24 PRO-1000HD I / PRO-800HD I 2 4:3 The display fills the screen as much as possible without altering the aspect ratio of the input signal. A Operations Screen Size Selection This unit incorporates screen modes of various height and width ratios.
25 PRO-1000HD I / PRO-800HD I Operations Operations Partial Image Enlargement (POINT ZOOM) This display allows any one of nine screen areas (AREA 1 to AREA 9) to be selected and enlarged to x1.
26 PRO-1000HD I / PRO-800HD I 3 OFF ON 2 Automatic Power OFF This display is equipped with automatic power - management and auto-power -off functions, which allow the unit to automatically switch to power -saving mode when no sync signal is detected. (A warning message appears onscreen before these functions operate.
27 PRO-1000HD I / PRO-800HD I Display Panel Adjustments Display Panel Adjustments Adjusting the Picture Quality Note Make these adjustments for each input (INPUT1 to INPUT5) and signals. PICTURE mode adjustment items Below are brief descriptions of the options that can be set in the PICTURE mode.
28 PRO-1000HD I / PRO-800HD I Display Panel Adjustments Adjusting the Image Position and Clock (Automatic Adjustment) Pressing AUTO SET UP on either the main unit operating panel or the remote control unit will adjust the screen position and clock to optimum values.
29 PRO-1000HD I / PRO-800HD I Display Panel Adjustments Display Panel Adjustments [When video signal input is selected] SELECT ENTER EXIT SET MENU PICTURE SCREEN SET UP OPTION POS I T I ON : 00 / RS E T E MAIN MENU INPUT1 3 Press 5 / ∞ to select the adjustment item, then press SET .
30 PRO-1000HD I / PRO-800HD I Other Operations Rewriting the Input Display (INPUT LABEL) This function allows rewriting of the screen contents displayed with differing inputs. For example, the default “INPUT 1” can be changed to “COMPUTER” or other name describing the connected component (up to maximum of 8 characters).
31 PRO-1000HD I / PRO-800HD I Other Operations Other Operations Changing the Color T emperature (COLOR TEMP) Note Color temperature settings are supported only with input signals from a video device. Settings are made individually for each of the inputs (INPUT1 – INPUT5).
32 PRO-1000HD I / PRO-800HD I Other Operations 3 OFF 3 HQ 3 STANDARD Setting the PureCinema mode When the PureCinema mode is selected, it functions automatically to detect video signals of movies recorded at 24 frames-per -second, changing the scan settings to allow enjoyment of higher quality movie playback.
33 PRO-1000HD I / PRO-800HD I Other Operations Other Operations V iewing in a Bright Location (HIGH CONTRAST) When viewing a picture in a bright location, setting this mode to “ ON ” will enable you to obtain a clear video image. • Set this mode to “ OFF ” when not viewing in a bright location.
34 PRO-1000HD I / PRO-800HD I Other Operations AUTO FUNCTION This display is equipped with an optional AUTO FUNCTION selector . When enabled, the selector automatically switches the display ’ s input source to INPUT 1 or INPUT 4 when an image signal is detected at the INPUT 1 jack or the INPUT 4 jack.
Additional Information 35 PRO-1000HD I / PRO-800HD I Additional Information Cleaning Regular cleaning will extend the life and performance of this unit. The recommended way to clean the display and related parts is described below . Before cleaning, be sure to unplug the power cord from the power outlet.
36 PRO-1000HD I / PRO-800HD I • No power • Unit cannot be operated. • Remote control does not operate. • INPUT is not changed. • Picture is cut off. • Strange color , light color , or dark, or color misalignment • Power is suddenly turned off.
Additional Information 37 PRO-1000HD I / PRO-800HD I Although this unit incorporates high precision technology in its design, please understand that there may be extremely slight pixel breakup, or light emission fault.
38 PRO-1000HD I / PRO-800HD I Specifications General (PRO-1000HD I ) Light emission panel ............ 50 inch plasma display panel Number of pixels .............................................. 1280 x 768 Power supply ...............................
Additional Information 39 PRO-1000HD I / PRO-800HD I 56.4Hz 70.1Hz 60Hz 66.7Hz 72.8Hz 75Hz 85Hz 56Hz 60Hz 72Hz 75Hz 85Hz 74.6Hz 60Hz 60Hz 70Hz 75Hz (74.
40 PRO-1000HD I / PRO-800HD I Additional Information 56.4Hz 70.1Hz 60Hz 66.7Hz 72.8Hz 75Hz 85Hz 56Hz 60Hz 72Hz 75Hz 85Hz 74.6Hz 60Hz 60Hz 70Hz 75Hz (74.
Additional Information 41 PRO-1000HD I / PRO-800HD I Additional Information Supplement 2 15.625 28.1 31.25 15.734 31.5 33.75 45.0 67.5 V ideo signal compatibilty table (INPUT1, INPUT2) V ertical F V (.
42 PRO-1000HD I / PRO-800HD I Additional Information Supplement 4 Signal assignment of INPUT 1 (Mini D-sub 15 pin socket connector) Input Output 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 R or C R /P R G or .
Additional Information 43 PRO-1000HD I / PRO-800HD I.
Published by Pioneer Corporation. Copyright © 2003 Pioneer Corporation. All rights reserved. <TSZZF/03I00000> Printed in Japan <ARB1558-B> PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pioneer PRO-1000HDI è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pioneer PRO-1000HDI - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pioneer PRO-1000HDI imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pioneer PRO-1000HDI ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pioneer PRO-1000HDI, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pioneer PRO-1000HDI.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pioneer PRO-1000HDI. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pioneer PRO-1000HDI insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
