Manuale d’uso / di manutenzione del prodotto K-30 del fabbricante PGS
Vai alla pagina of 25
R Models K-30 and K-40 Gas Grill click here for Legacy Series ASSEMBL Y , OPERA TING & MAINTENANCE INSTRUCTIONS (SHOWN WIT H OPTIONA L SIDE BURNER AND INFRA -BROIL KIT) PACIFIC GAS SPECIALTIES CORPORATION P.
TABLE OF CONTENTS Safety Responsibilities, Warning Symbol ................................................................................................. Page 2 Grill Model Identification (Location of Serial Number) .................................
3 SPECIAL ATTENTION: THIS SYMBOL NOTES SAFETY RELATED ITEMS OR PRODUCT WARNINGS IT IS YOUR RESPONSIBILITY TO: ASSEMBLE, INSTALL, LEAK CHECK, CARE AND OPERATE YOUR GAS GRILL. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. FOR YOUR SAFETY IF YOU SMELL GAS: 1.
VERY IMPORTANT SAFETY TIPS AND WARNINGS PGS is most concerned about the safe us e of our product. The following two pages are a summarization of the safety tips found throughout this manual. Please take the time to re view them, as they are crit ical in the enjoyable use of your grill.
5 • Never lean over hot grill surface or look directly in to grill when attempting to light. The grill hood must be opened fully when lighting. Be sure that a ll family members are aware of safe li ghting and operating proc edures for the grill.
should occur, turn the valves to the “OFF” position on your grill head, then the valve on the tank. Wait tw o minutes and then open the valve on the tank BEFORE turning the valves of your grill head. Alw ay s turn on the valve at the top of your tank and then the valves to your grill head to the “ON” position.
PROPANE CYLINDER FILLING AND HANDLING SAFETY TIPS • Be certain tank is equipped with an overfill protection device. • Do not modify hose or LP fittings.
LP-Gas Tank Specifications: GRILL HEAD: Entire BBQ grill (lid & pit) that can be mounted on a variety of options. Weight (filled) 40 lbs. (18.14 kg) Capacity 4.
YOU WILL NEED THE FOLLOWING TOOLS TO ASSEMBLE YOUR PGS GAS GRILL: 1 - Mallet or Hammer 1 - Med. Phillips Head Screw Driver 2 - 6" Adjustable Wrenches 1 - Small Ro ll of Teflon Tape (Natural Gas O.
DRAWINGS OF NUTS & BOLTS AND FASTENERS REF # DESCRIPTION (QUANTITY) REF # DESCRIPTION (QUANTITY) BASE TO PEDESTAL COLLAR BOX TO PEDESTAL AND CONTROL PANEL 1. 5/16 X 3/4" BOLT (6) 13. 8 X 1/2” SHEET METAL SCREW (2) 2. 5/16” WASHER (6) 14. TINNERMAN CLIP (2) FEEDLINE 3.
PART NUMBERS AND DESCRIPTIONS PLEA SE NOTE: A LL PA RTS MA Y NOT COME WITH A LL MOUNTING OPTIONS REF # DESCRIPTION QTY MODEL K-40 MODEL K-30 1 UPPER GRILL CASTING 1 140125 130125 2 LOWER GRILL CASTING.
PGS GAS GRILL PARTS BREAKDOWN GRILL HEAD LID TO GRILL HEAD SIDE SHELVES TO GRILL HEAD (OPTIONAL) COLLECTOR BOX LCS/LCB FOR IGNITOR CONTROL PANEL TO GRILLHEAD GREASE TRAY CONTROL PANEL STIFFENING BRACK.
CHECK LIST OF GRILL BOX CONTENTS IF YOU PURCHASED A "B" PED (Black Pedestal Kit) YOU WILL FIND 1. REMOVE ALL CONTENTS FROM BASE AND PEDESTAL OR 48" POST BOX.
Be sure that the fuel source designated on your grill head is the same as that of the support system. DO NOT USE A GRILL HEAD EQUIPPED FOR NATURAL GAS WITH LP GAS OR THE OPPOSITE . Maximum inlet pressure from System LP cannot exceed 11" W.C. The proper orifices and valving for each gas is contained in the grill head.
9. TEST ALL FITTINGS FOR LEAKS. BEFORE ATTEMPTING TO LIGHT GRILL, BE CERTAIN BOTH CONTROL PANEL VALVES ARE IN THE OFF POSITION. TURN GAS SUPPLY ON AT THE SOURCE AND CHECK ALL CONNECTIONS WITH A SOLUTION OF 50% LIQUID SOAP, 50% WATER. SOLUTION CAN BE SPRAYED ON WITH A SPRAY BOTTLE OR PAINTED ON ALL CONNECTIONS WITH A BRUSH.
K-40 4. Figure 6 Control Panel/ Feedline to Valve Connection Figure 4 Installation of Cage Nuts on Pedestal ORIFICE ENGAGEMENT 4. Place lower grill casting on top of pedestal lining up four bolt holes (located ju st above air vents) with cage nuts just installed (see Fi g.
THIS CONNECTION WILL REQUIRE LEAK CHECK UPON ASSEMBLY COMPLETION. (see Fig. 18). 8. Attach feed line mounti ng clip to pedestal using #8 X 1/2" S.S. machine screw. BE SURE TO ALIGN SCREW TO AVOID STRIPPING THREADED NUTSERT. 9. Remove "Sure Start" Ignitor module from the underside of control panel by unscrewing black ring.
6. Attach twin lid side "Stay Cool" handles using 5/16" X 3/4" bolt and star washer, tighten securely. 7. Slide grease tray into slot at top rear of pedestal. Tray must be tilted up before inserting in. 8. If you purchased a LC base kit you will need to attach the tank strap to the back of the cart.
Figure 17 Leak Checking the Valve Connection 4. If no gas leaks appear (bubbles), turn off gas supply and continue assembly. IF YOU ARE UNABLE TO STOP A LEAK, CONTACT YOUR LOCAL DEALER FOR ASSISTANCE BEFORE PROCEEDING. Figure 15 LP Hose/Regulator Connection 5.
LIGHTING YOUR GRILL IF THE GRILL STILL FAILS TO LIGHT, CHECK THE GAS SUPPLY. YOU COULD BE OUT OF LP GAS OR THE MAIN GAS SUPPLY FOR NATURAL GAS MAY HAVE BEEN TURNED OFF. IF THE LP TANK HAS GAS OR THE NATURAL GAS IS TURNED ON AND THE GRILL STILL WILL NOT LIGHT: CHECK THE ELECTRONIC IGNITOR TO MAKE SURE IT IS SPARKING.
After cleaning burner assembly and the lower casting of grill, reinstall burner to lower casting. In many areas, spiders or small insects have been found to create "flashback" problems. The spiders spin webs and/or insects build nests in the grill's venturi tube(s).
BEFORE LIGHTING YOUR GRILL: TURN YOUR GAS SUPPLY (LP OR NAT) ON AND TEST ALL FITTINGS FOR LEAKS. BEFORE ATTEMPTING TO LIGHT GRILL, BE CERTAIN BOTH VALVES ARE IN THE OFF POSITION. BE CERTAIN THAT YOUR GAS SUPPLY IS OFF AND YOUR GAS FEED LINE HAS BEEN BLED OF ANY FUEL.
PLEASE NOTE: IMPROPER ORIFICE SIZE COULD RESULT IN EITHER INSUFFICIENT OR EXCESS GAS GOING TO BURNER, AND MAY POSE A SAFETY RISK. HELPFUL TIPS 1. Before using your grill for the first time, please light and turn both burners on HI heat for ten to fifteen minutes.
FLAME ADJUSTMENT TIPS Your PGS burner has been designed to operate efficiently under widely va rying operating conditions and is adjusted at the fact ory for proper operation so no adjustments should be required.
PGS ACCESSORIES To more fully enjoy your gas grilling experience, PGS has des igned and manufactures a vari ety of accessories and barbecue Covers (not pictured).
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il PGS K-30 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del PGS K-30 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso PGS K-30 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul PGS K-30 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il PGS K-30, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del PGS K-30.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il PGS K-30. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo PGS K-30 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
