Manuale d’uso / di manutenzione del prodotto FT8301A del fabbricante Pelco
Vai alla pagina of 36
INST ALLA TION F T8301A Miniature Fiber T ransmitter Single-Channel Digitally Encoded Video C1680M (1/06).
.
C1680M (1/06) 3 Contents Important Safe ty Instruct ions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C1680M (1/06) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
C1680M (1/06) 5 The product and/or manual may bear the following marks: This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
6 C1680M (1/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful in terference, and (2) this device must accept any interference received, including interfer ence that may cause undesired operation.
C1680M (1/06) 7 Product Overview DESCRIPTION The F T8301A miniature fiber transmitter provides the ability to transmit one composite video channel over one optical fiber . The F T8301A transmitter is compatible with the single-channel F R8301A and dual-channel FR8302A receivers.
8 C1680M (1/06) Figure 1. Single-Channel V ideo T ransmission Using F T8301A T ransmitter ONE VIDEO OUTPUT COMPATIBLE RECEIVER ONE FIBER DF5/DF8 FIXED MOUNT DOME FT8 3 01A TRANSMITTER ONE VIDEO OUTPUT.
C1680M (1/06) 9 FRONT PANEL The front panel of the F T8301A transmi tter provides connectors and LED indicators (refer to Figure 2). Figure 2. Front Panel of F T8301A T ransmitter—Multimode and Single-Mode Models NOTE: The F T8301A transmitter provides two video input connectors: one UTP connector and one BNC connector .
10 C1680M (1/06) Installation PACKAGE CONTENTS The following it ems are supplied: 1 F T8301A transmitter with attached left and right wall -mounting brackets 1 Regulated switching power suppl y with four plug adapt ers (North American, Australian, U.K.
C1680M (1/06) 11 CONNECTIONS Before mounting the F T8301A transmitter , note t he following transmitter connections (refer to Figure 3): • Power connection NOTES: – A 12 VDC or 24 VA C power supply can be us ed to power the trans mitter . A 12 VDC power supply is provided.
12 C1680M (1/06) Figure 3. F T8301A T ransmitter Connections POWER C ONNE C TION C OAXIAL C ABLE UTP WIRE S OR FIBER OPTI C C ABLE POWER C ONNE C TION C OAXIAL C ABLE UTP WIRE S OR MULTIMODE MODEL S S.
C1680M (1/06) 13 MOUNTING This section provides info rmation about the following: • Mounting the transmitter to a wall • Mounting the transmitter into an EH2515 Series enclosure • Mounting the t.
14 C1680M (1/06) MOUNTING THE T RANSMITTER INTO AN EH2515 SER IES ENCLOSURE The following procedure provides instructions to mount the F T8301A transmitter into an existing EH2515 Series enclosure installation. T o mount the transmitter into an EH2515 Series enclosure, do the following: 1.
C1680M (1/06) 15 Figure 5. Attaching EH2500 Bracket to F T8301A T ransmitter (2) SC REW S , 4-40 X 0.187-IN C H, PHILLIP S , FLAT HEAD EH2500 BRA C KET S IDE VIEW OF EH2500 BRA C KET WITH ATTA C HED F.
16 C1680M (1/06) Figure 6. Mounting F T8301A T ransmitter into EH2515 Enclosure S IDE VIEW OF EH2515 EN C LO S URE WITH FT8301A TRAN S MITTER IN S TALLED EH2500 BRA C KET WITH ATTA C HED FT8301A TRAN S MITTER EH2515 EN C LO S URE FT8301A TRAN S MITTER SC REW, 10-32 X 0.
C1680M (1/06) 17 7. Connect power , fiber optic, and video cables to the transmitter by doing the following: a. Insert the power cable through ei ther of the two gland connectors on the enclosure, route the cable underneath the transmitte r toward the power connector on the transmitter , and then connect the cable to the power connector .
18 C1680M (1/06) MOUNTING THE T RANSMITTER INTO AN EH3512/EH3515 SERIES ENCLOSURE The following procedure provides instructions to mount the F T8301A transmitter into an existing EH3512/EH3515 Series enclosure installation. T o mount the transmitter into an EH3512/EH 3515 Series enclosure, do the following: 1.
C1680M (1/06) 19 8. Do the following (refer to Figure 9): a. Using the replacement gland supplied in the EH3500 Series accessory kit, attach the gland to either of the cable entry holes on the enclosure. Note that the replacement gland is shorter than the two gl ands provided for the enclosure.
20 C1680M (1/06) Figure 10. Removing EH3512/EH3515 Enclosure Accessori es 10. Mount the transmitter into the enclosure by doing the following (refer to Figure 11): a. Position the transmitter at the rear of the enclosure with the connectors facing the camera.
C1680M (1/06) 21 Figure 11. Mounting F T8301A T ransmitter into EH3512/EH3515 Enclosure FT8301A TRAN S MITTER S IDE VIEW OF EH3512/EH3515 EN C LO S URE WITH FT8301A TRAN S MITTER IN S TALLED 6-32 C AP.
22 C1680M (1/06) 11. Connect power , fiber optic, and video cabli ng to the transmitter by doing the following: a. Insert the power cable through the gland or conduit on the bottom of the enclosure, and then connect the cable to the powe r connector on the transmitter .
C1680M (1/06) 23 Figure 13. Reinstalling EH3512/EH3515 Heater Bracket, Blo wer , and Heater Figure 14. Reinstalling EH3512/EH3515 PC Board (2) LO C K WA S HER S , #6 (2) SC REW S , 6-32 X 1.
24 C1680M (1/06) MOUNTING THE T RANSMITTER INTO A DF5/DF8 DOME The F T8301A transmitter can be mounted into DF5 and DF8 in-ceiling and pendan t fixed mount domes.
C1680M (1/06) 25 Mounting the T ransmitter into a DF5/DF8 In-Ceiling Dome The following procedure provides in structions to mount the F T8301A tr ansmitter into an existing DF5/ DF8 in-ceiling dom e installation. T o mount the transmitter into a DF5/ DF8 in-ceiling dome, do the following: 1.
26 C1680M (1/06) 8. Mount the transmitter into the back box as follows (ref er to Figure 17): NOTE: In Figure 17, the pan bracket is removed from t he back box for illustration purposes only . Y ou do not need to remove the pan bracket from the back box.
C1680M (1/06) 27 9. Connect the transmitter as follows: a. Connect power to the transmitter . b. Route the fiber optic cable around the inside of the back box toward the transmitter and connect the cable to the fiber opti c connector on the transmitter .
28 C1680M (1/06) Mounting the T ransmitter into a DF5/DF8 Pendant Dome The following procedure provides in structions to mount the F T8301A tr ansmitter into an existing DF5/ DF8 pendant dome installation. T o mount the transmitter into a DF 5/DF8 pendant dome, do the following: 1.
C1680M (1/06) 29 8. Mount the transmitter into the back box as follows (ref er to Figure 19): NOTE: In Figure 19, the pan bracket is removed from the back box for illustration purposes only . Y ou do not need to remove the pan bracket from the back box.
30 C1680M (1/06) 9. Connect the transmitter as follows: a. Connect power to the transmitter . b. Route the fiber optic cable around the inside of the back box toward the transmitter and connect the cable to the fiber opti c connector on the transmitter .
C1680M (1/06) 31 T roubleshooting LED indicators on the F T8301A transmitter (refer to Figure 2) allow you to m onito r signal status and laser status.
32 C1680M (1/06) Specifications VIDEO Number of Channels 1 Modulation T ype Pulse code m odulation, 8-bi t resolution Video Input BNC, 1.0 Vp-p, 75 ohms or UTP , 100 ohms; NTSC, P AL, and SECAM Bandwidth 6.
C1680M (1/06) 33 OPTICAL POWER BUDGET , TRANSMISSI ON DIST ANCE, AND LASER CLASS 1 LIMIT F T8301A Miniature T ransmitter Compatible Receivers Wavelength Optical Power Budget Maximum T ransmission Distance Laser Class 1 Limit* Multimode (62.5/125 µm) F T8301AMST FR8301AMSTR 850 nm 20 dB † 2 km (1.
34 C1680M (1/06) This equipment contains electrica l or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local de aler for procedures for recycling this equipment.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merc handise pr oved defective in ma terial or wor kmanship for a period of one year after the date of shipment. Exception s to this warrant y are as noted below: • Five years on F T/FR8000 Series fiber o ptic products.
United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East Worl dwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pelco FT8301A è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pelco FT8301A - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pelco FT8301A imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pelco FT8301A ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pelco FT8301A, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pelco FT8301A.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pelco FT8301A. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pelco FT8301A insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
