Manuale d’uso / di manutenzione del prodotto CX9000 del fabbricante Pelco
Vai alla pagina of 28
CX9000 Series Coaxitron ® Receiver/Driver Installation/ Operation Manual C554M-A (5/98) Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.
2 Pelco Manual C554M-A (5/98) CONTENTS Section Page 1.0 GENERAL .................................................................................................. 5 1.1 IMPORT ANT SAFEGUARDS AND WARNINGS ............................... 5 1.2 REGULA TORY NOTICES .
Pelco Manual C554M-A (5/98) 3 REVISION HISTOR Y Manual # Date Comments C554M 4/95 Original version. 8/96 Changed fusing values for fuse #F1, Figure 1. 8/97 Changed fusing values for fuse #F2, Figure 1 per ECO# 93-362. C554M-A 5/98 Rev A. Changed manual to new format and manual pagination.
4 Pelco Manual C554M-A (5/98) (This page intentionally left blank.).
Pelco Manual C554M-A (5/98) 5 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed.
6 Pelco Manual C554M-A (5/98) 1.2 REGULA TOR Y NOTICES NOTE: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are de- signed to provide reasonable protection against harmful interference in a residen- tial installation.
Pelco Manual C554M-A (5/98) 7 2.0 DESCRIPTION The Coaxitron ® receiver/driver operates on the principle of transferring control in- formation and video on the same line. A train of pulses containing control informa- tion is superimposed on the video at VIS time.
8 Pelco Manual C554M-A (5/98) 2.1 MODELS Outdoor CX9024RX Coaxitron ® outdoor receiver for 24 VAC pan/tilts with power supply for pan/tilt, zoom lens, 24 VAC camera power. 120 VAC input. (UL) CX9024RX/220 Same as CX9024RX except 230 VAC input and CE compliant.
Pelco Manual C554M-A (5/98) 9 2.2 CERTIFICA TIONS The products identified below have been tested and certified for agency compli- ance as noted below .
10 Pelco Manual C554M-A (5/98) 3.0 INST ALLA TION 3.1 MOUNTING THE CX9000 1. Determine the location where the CX9000 is to be installed. 2. Using the CX9000 box as a template, mark the hole pattern on the mounting surface. Drill holes in the mounting surface.
Pelco Manual C554M-A (5/98) 11 3.3 CONNECTOR ASSEMBL Y Assemble the connector parts according to the instructions below . Detail B, in Fig- ure 1, reflects the pin arrangement specific to the CX9000 Series receiver/drivers. Refer to Figures 1 and 2 during assembly .
12 Pelco Manual C554M-A (5/98) Figure 1. Connector Assembly OR 1" ( 2.54 cm) 1/8" (0.318 cm) FRONT VIEW 1 4 5 9 15 10 22 16 28 23 33 29 37 34 37-PIN.
Pelco Manual C554M-A (5/98) 13 Figure 2. Receiver Control Output/Input Pin Assignments P1 3 BRN P/T COM 1 5 ORG LEFT 3 8 4 7 GRN DOWN 5 6 BLU UP 6 4 VIO RIGHT 7 9 GRA Y GROUND 8 12 BLACK IRIS 10 1 1 1.
14 Pelco Manual C554M-A (5/98) 3.3.1 Receiver Control Output for 12 VDC Camera Option The usual output for camera power is 24 V AC, accessed at pins 9 and 14 of the 37- pin AMP connector (see T able C) where camera AC (high) and camera AC (low) emerge as camera input power .
Pelco Manual C554M-A (5/98) 15 T able B. SB1900, SS2000 and SB2600 Series Preset Wiring Pinouts Coaxitron ® Receiver SB2600-PP and SB2600SL-PP SB1900-PP, SB1900SL-PP, Preset Unit Only SS2000-PP and S.
16 Pelco Manual C554M-A (5/98) Coaxitron ® Receiver Preset Position Pan/Tilts Preset Position Pan/Tilts PT280, Preset Unit Only PT520, PT550, PT570 and PT680 Series and SB2800 Series Domes/ PT1250 Se.
Pelco Manual C554M-A (5/98) 17 Coaxitron ® Receiver Preset Position Lenses Preset Unit Only 37-pin 9-pin Connector Function Connector Function 1 Pan/Tilt Common 1 Iris 2 Manual Iris 2 Zoom 3 Pan Left.
18 Pelco Manual C554M-A (5/98) 3.5 AUXILIAR Y FUNCTIONS The Coaxitron ® receiver , using a Revision J or newer receiver/driver PC board, is capable of operating up to four remotely activated auxiliary functions. Each auxil- iary output may be individually converted at the receiver for momentary or latching operation.
Pelco Manual C554M-A (5/98) 19 Figure 6. External Device Wiring Diagram Figure 5. Auxiliary Functions Wiring Diagram 1 2 3 8 MANUAL IRIS GROUND COAXITRON ® RECEIVER/DRIVER 37-PIN + 12 VDC NORMALL Y -.
20 Pelco Manual C554M-A (5/98) 3.6 POWER There is no on/off switch. The CX9000 is “hot” when the fuse is installed and the input wiring is connected. Refer to T able E for the recommended maximum distances when wiring 24 V AC applications. Refer to Figure 7 for AC input configurations and recommended fuse values.
Pelco Manual C554M-A (5/98) 21 Figure 7. AC Input and Fuse V alues F3 F2 F1 POWER OUTPUT INPUT P/T VAC VAC CX9024RX CX9024RXI *12VDC Camera options use a 1/2ASB fuse value in this position in place of the 2/10's value.
22 Pelco Manual C554M-A (5/98) 4.0 OPERA TION 4.1 Preset Power -up Routine When a pre-position Coaxitron ® receiver is first powered up, it goes through a rou- tine that orients itself to the pan/tilt and lens connected to it. The routine first automatically operates the lens zoom and focus functions.
Pelco Manual C554M-A (5/98) 23 5.0 TROUBLESHOOTING GIT100 Ground Isolation T ransformer Although Coaxitron ® receiver/drivers are immune to transient or surge disturbances, their performance can be impaired when there are large ground loop voltages be- tween associated controllers and the receiver/driver .
24 Pelco Manual C554M-A (5/98) 7.0 SPECIFICA TIONS MECHANICAL Latching Fiberglass Box: Two latches (accommodates padlocks - not supplied) Anodized Metal Box: No latches.
Pelco Manual C554M-A (5/98) 25 NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES Figure 8. CX9000 Series Dimension Drawing (Fiberglass Box) Weight (typical) Unit Shipping Fiberglass Box: 6 lb (2.72 kg) 8 lb (3.63) Anodized Metal Box: 6 lb (2.
26 Pelco Manual C554M-A (5/98) 6.00 (15.24) 9.01 (22.89) 9.90 (25.15) 1 1.01 (27.97) 1 1.50 (29.21) 4.77 (12.12) 12.25 (31.12) 12.62 (32.05) 4.77 (12.12) Figure 10.
Pelco Manual C554M-A (5/98) 27 NOTES.
28 Pelco Manual C554M-A (5/98) 8.0 W ARRANTY AND RETURN INFORMA TION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1998, Pelco. All rights reserved.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pelco CX9000 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pelco CX9000 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pelco CX9000 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pelco CX9000 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pelco CX9000, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pelco CX9000.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pelco CX9000. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pelco CX9000 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
