Manuale d’uso / di manutenzione del prodotto CM9760-PEX del fabbricante Pelco
Vai alla pagina of 16
CM9760-PEX Por t Expander Installation/ Operation Manual C546M (8/98) Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (8.
2 Pelco Manual C546M (8/98) REVISION HISTOR Y Manual # Date Comments C546M 8/98 Original version. CONTENTS Section Page 1.0 GENERAL .................................................................................................. 3 1.1 IMPORT ANT SAFEGUARDS AND WARNINGS .
Pelco Manual C546M (8/98) 3 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed.
4 Pelco Manual C546M (8/98) Figure 1. Fully Populated CM9760-PEX (Port Expander) Rear View . 2.0 DESCRIPTION The Pelco CM9760-PEX (Port Expander) is designed to increase the number of devices that can be connected to a CM9760-CC1, using additional serial communication channels to increase port density .
Pelco Manual C546M (8/98) 5 2.1 MODELS CM9760-PEX A port expander card cage capable of containing up to five port expansion cards. Each installed card assembly expands one COMM port on the rear of the CM9760-CC1 from one to eight ports.
6 Pelco Manual C546M (8/98) 3.0 INST ALLA TION 3.1 HARDW ARE 3.1.1 Card Expansion Installation Each port expander card has its own microprocessor and power regulator .
Pelco Manual C546M (8/98) 7 3.1.2 DIP Switch Settings Each port expansion card, before being installed into the CM9760-PEX card cage should be properly configured with respect to DIP switch settings. The switch setting positions configure communication attributes as well as condition the PEX for the device type connected to each expansion card.
8 Pelco Manual C546M (8/98) Figure 4. Pin Connections Between a CM9760-PEX and CM9760-CC1 Figure 5. Pin Connections Between a CM9760-PEX and Pelco Receiver/Drivers 3.1.3.1 Connection Between a CM9760-PEX and a CM9760-CC1 The connection of a CM9760-PEX and a CM9760-CC1 is illustrated in Figure 4.
Pelco Manual C546M (8/98) 9 Figure 6. Pin Connections Between a CM9760-PEX and a Multiplexer Figure 7. Pin Connections Between a CM9760-PEX and CM9760-KBD 3.1.3.3 Connection Between a CM9760-PEX and Multiplexers The connection of a Multiplexer to a CM9760-PEX is illustrated in Figure 6.
10 Pelco Manual C546M (8/98) 3.1.4 System Illustration Figure 8 illustrates a port expander included in a hypothetical CM9760 system setup. Figure 8. Example of Port Expander as Part of CM9760 System.
Pelco Manual C546M (8/98) 11 3.2 SOFTW ARE 3.2.1 Address Details Normally , up to 16 camera receiver/drivers can be connected to one SerCom 8 port on a CM9760-CC1; however , up to 128 camera receiver/drivers can be connected to the same port through expansion by using a Port Expander .
12 Pelco Manual C546M (8/98) 3.2.2 Software Considerations We now expand the previous section (using receiver/drivers as the attached device) to include the configuration of the necessary software files that need to be setup before successful operation of the PEX can be realized.
Pelco Manual C546M (8/98) 13 Figure 10. Camera File Configuration Figure 10 illustrates the other file we previously mentioned-the camera (.CAM) file. It is here that address parameters for each attached receiver/driver is uniquely identified. Also note that this file is used to configure multiplexers, if needed.
14 Pelco Manual C546M (8/98) 4.0 GUIDELINES FOR POR T EXP ANDER USE The following points are listed as Pelco recommended guidelines for port expander use. The reason the port expander exists at all is to extend the current port limit past that physically allowed by the CM9760-CC1.
Pelco Manual C546M (8/98) 15 5.0 SPECIFICA TIONS ELECTRICAL Input Voltage: 120 VAC or 230 VAC 50/60 Hz. ± 10%, selectable Power Consumption: 100 VA Fusing: 2 Amps COMMUNICATIONS Data Ports Input: DB-.
16 Pelco Manual C546M (8/98) 6.0 W ARRANTY AND RETURN INFORMA TION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1998, Pelco. All rights reserved.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pelco CM9760-PEX è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pelco CM9760-PEX - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pelco CM9760-PEX imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pelco CM9760-PEX ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pelco CM9760-PEX, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pelco CM9760-PEX.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pelco CM9760-PEX. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pelco CM9760-PEX insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
