Manuale d’uso / di manutenzione del prodotto c649m del fabbricante Pelco
Vai alla pagina of 56
TLR2168S Time-Lapse VCR Installation/ Operation Manual C649M (7/99) Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (800.
2 Pelco Manual C649M (7/99) CONTENTS Section Page 1.0 GENERAL ................................................................................................. 5 1.1 SAFEGUARDS, WARNINGS, CAUTION, AND CARE .................... 6 1.2 REGULA T ORY NOTICES .
Pelco Manual C649M (7/99) 3 Section Page 8.2 TIMER RECORDING ...................................................................... 36 8.2.1 Programming Procedure .................................................... 36 8.2.2 Special DW Settings ......
4 Pelco Manual C649M (7/99) REVISION HISTOR Y Manual # Date Comments C649M 6/99 Original version. 7/99 Removed material on the optional remote control. LIST OF ILLUSTRA TIONS Figur e Page 1 T ypical System Setup .......................................
Pelco Manual C649M (7/99) 5 RISK OF ELECTRIC SHOCK DO NOT OPEN W ARNING WARNING: T O REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SER VICEABLE P AR TS INSIDE REFER SERVICING T O QUALIFIED SERVICE PERSONNEL.
6 Pelco Manual C649M (7/99) 1.1 SAFEGUARDS, WARNINGS, CAUTION, AND CARE Observe the following W ARNINGS before installing and using this product. Follow all warnings and instructions marked on the VCR. Instructions Read all the safety and operating instructions before operating the VCR.
Pelco Manual C649M (7/99) 7 Cleaning Unplug the VCR from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Clean with a soft cloth slightly moistened with mild detergent and water. Wipe dry . NEVER USE PETROLEUM-BASED SOLUTIONS. Attachments Do not use attachments not recommended by Pelco as they may cause hazards.
8 Pelco Manual C649M (7/99) Care Of V ideo Cassette T ape 1. Avoid violent vibration or shock. 2. Do not place near a strong magnetic field (near a motor , transformer, or magnet). 3. Never place or store in direct sunlight. 4. Avoid dusty places. 5. Place the cassette in the cassette case and store vertically.
Pelco Manual C649M (7/99) 9 2.0 OVER VIEW 2.1 INTRODUCTION TO TIME-LAPSE RECORDERS T ime-lapse recording permits longer than ordinary recording times. The primary reason for using time-lapse recording in a CCTV security system is that a single VCR tape can be used for an extended period of time beyond the standard record- ing time.
10 Pelco Manual C649M (7/99) S-VHS ET Mode —This mode, using VHS tape, has picture quality closer to S-VHS recording (over 400 lines). High Density Recor ding - H·D<EP> –High density recording records three times more fields than normal density (SP).
Pelco Manual C649M (7/99) 11 3.0 QUICK ST ART 3.1 BASIC ST ART 1. Decide where to locate the VCR. Do all system hookups first (camera, multi- plexer , etc.) if you are installing the VCR in a location where you cannot ac- cess its rear panel. 2. Connect the VCR to other equipment (Sections 4.
12 Pelco Manual C649M (7/99) 4.0 INST ALLA TION 4.1 PRE-INST ALLA TION CAUTIONS 1. Provide secure power to system components. Prevent overloading or short- ing by dedicating power circuits to the surveillance equipment. Restrict ac- cess to the surveillance system circuit breakers, switches, and equipment power cords.
Pelco Manual C649M (7/99) 13 Figure 1. T ypical System Setup AUDIO OUT MIC IN VIDEO OUTPUT FROM CAMERA VIDEO IN AUDIO IN MONITOR VIDEO OUT CCTV CAMERA VIDEO IN MIC 600 Ω VIDEO OUT IN IN OUT MIC AUDI.
14 Pelco Manual C649M (7/99) Figure 2. Connecting VCR T o Multiplexer VCR AUX MAIN SPOT SVHS OUT IN SVHS IN COM OUT NN H OC C S 120 V AC 60 Hz ALARMS 1 2 3 4 5 67 8 9 1 0 1 1 1 4 1 5 1 6 12 13 MX4000 .
Pelco Manual C649M (7/99) 15 Figure 3. Front View 5.0 CONTROLS 5.1 FRONT P ANEL 1. POWER button Press for on; press again for off. The POWER indicator illuminates when the VCR is turned on. 2. EJECT button Press to remove the cassette. 3. Cassette loading slot Insert the cassette in this slot to load it.
16 Pelco Manual C649M (7/99) 1. M (counter memory) indicator Illuminates during rewind for counter memory mode. 2. PL (power loss) indicator Illuminates when there is a power failure during record- ing. 3. ALARM indicator Flashes during alarm recording and stays on when the alarm recording is finished.
Pelco Manual C649M (7/99) 17 Figure 5. Rear View 5.3 REAR P ANEL 1. AC power socket The power cord plugs into this socket. Insert the cord firmly . 2. SET IN terminal (Alarm) input terminal to start alarm recording.
18 Pelco Manual C649M (7/99) (This page intentionally left blank.).
Pelco Manual C649M (7/99) 19 6.0 PROGRAMMING 6.1 GENERAL PROGRAMMING INSTRUCTIONS The following is a universal procedure that shows how programming is done on the VCR. Use the JOG dial to select items, the SHUTTLE ring to the right to enter , and SHUTTLE ring to the left to exit.
20 Pelco Manual C649M (7/99) 6.2 QUICK GUIDE TO TLR2168S MENU STRUCTURE The operating parameters of the VCR are set through various on-screen menus. Program your choices on the menus according to the instructions on the following pages.
Pelco Manual C649M (7/99) 21 6.3 MAIN MENU • DISPLA Y Sets the display format of the time and date on the monitor. • TIME DA TE SEARCH Sets the time/date and direction to search for a desired location on a tape. • TIMER PROGRAM Sets the timed recordings.
22 Pelco Manual C649M (7/99) 6.5 TIME DA TE SEARCH MENU On this menu you set the date, time, and direction to search for the desired location on a tape. TIME Turn the JOG dial to set the hour and minute to search for. DATE Turn the JOG dial to set the day of the month to search for.
Pelco Manual C649M (7/99) 23 Figure 1 1. T imer Program Illustration (program number) This number identifies the program. If the recording times of two programs overlap, the higher program number has priority. DW Day of the week. DAY is used to record at the same time every day.
24 Pelco Manual C649M (7/99) REC MODE Sets the recording mode. • NORMAL<SP> – Choose SP (standard play) when higher picture quality is desired. With this setting, the recording time mode is switched in the following order: 2H, L24H, 48H, 72H, 96H, 120H, 168H, 0H, 2H.
Pelco Manual C649M (7/99) 25 CLOCK OUT Sets the number of frames or fields to record (depending on the recording mode) at the CLOCK OUT terminal. The default is REC. 1. First, set the recording mode for the CLOCK OUT pulse output in the Rear T erminal menu.
26 Pelco Manual C649M (7/99) ALL MENU Turn the SHUTTLE ring to the right and the words ALL MENU INITIALIZE INITIALIZE will be displayed. When you turn the SHUTTLE ring to the left, all settings (except the TIMER RECORDING setting) will be cleared. Turn the SHUTTLE ring to the right to return to the Maintenance menu.
Pelco Manual C649M (7/99) 27 PB HEAD Sets the heads for playback. When you turn the JOG dial to the SELECT right, the display switches in the following order: NORMAL, L/ L (left/left), R/R (right/right), AUTO, NORMAL. The default is NORMAL. The VCR has two pairs of SP (standard play) heads.
28 Pelco Manual C649M (7/99) 6.10.2 Set the Day and Time 1. Press the DISPLA Y button to display the Main menu on the monitor . 2. T urn the JOG dial to select FIRST TIME SET UP . 3. T urn the SHUTTLE ring to the right. The First T ime Set Up menu will appear.
Pelco Manual C649M (7/99) 29 OFF 01 01 97 00 :00 : 00 DAYLIGHT SAVINGS MONTH DATE YEAR TIME < TIME DATE ADJUST > OFF 02 01 97 00 :00 : 00 DAYLIGHT SAVINGS MONTH DATE YEAR TIME < TIME DATE ADJ.
30 Pelco Manual C649M (7/99) 7.0 LOADING/UNLOADING/PROTECTING THE T APE CASSETTE Y ou can load video cassette tapes into your VCR as long as it is plugged into a power source. Loading a cassette automatically turns the VCR on even if its power switch is turned off.
Pelco Manual C649M (7/99) 31 Figure 18. Manual Recording Steps 8.0 RECORDING 8.1 MANUAL RECORDING 1. Load a cassette with the erasure prevention tab intact. 2. Set the S-VHS switch to on or off. 3. Press the REC/PLAY MODE buttons (+/-) to select the desired recording mode.
32 Pelco Manual C649M (7/99) 8.1.1 Recording Mode • Pressing the REC/PLAY MODE button in SP mode, switches the recording mode in the following order: 2H, L24H, 48H, 72H, 96H, 120H, 168H, 0H, 2H. • Pressing the REC/PLAY MODE button in EP mode, switches the recording mode in the following order: 6H, L18H, 48H, 72H, 96H, 120H, 168H, 0H, 6H.
Pelco Manual C649M (7/99) 33 8.1.4.1 Number of T ape Uses (Repeat Recor ding Times) Displays the number of times a tape has been used when the T APE END setting is set to REWIND, REPEA T , or ALARM•PROT . 1. Press the DISPLA Y button. The Main menu will appear .
34 Pelco Manual C649M (7/99) 8.1.5 Series Recording Y ou can do series recording by connecting two or more TLR2168S VCRs together . When the tape in the first VCR reaches the end during recording, the tape in the second VCR automatically begins recording.
Pelco Manual C649M (7/99) 35 8.1.7 Synchronous Recor ding Several camera images can be mixed together through a camera switcher and then recorded separately onto several VCRs. T o do so, assign a camera to each VCR. The VCR records only the camera image assigned to it.
36 Pelco Manual C649M (7/99) 8.2 TIMER RECORDING 8.2.1 Programming Pr ocedur e 1. Press the DISPLA Y button to display the Main menu on the monitor . 2. T urn the JOG dial to select TIMER PROGRAM and turn the SHUTTLE ring to the right. The TIMER PROGRAM display will appear .
Pelco Manual C649M (7/99) 37 8.2.3 Avoid Mistakes When Using the Timer Refer to T able G if you get an error when pressing the TIMER REC button. T able G.
38 Pelco Manual C649M (7/99) 8.3.1 Alarm Recording Connection Y ou can confirm an alarm from a distance by connecting the ALM (alarm) OUT terminal to an existing alarm system panel or other external device such as a buzzer. Figure 23. Alarm Recording Connection 8.
Pelco Manual C649M (7/99) 39 8.3.3 Programming For Alarm Recording Alarm recording speeds up recording when the VCR is recording in one of the time- lapse modes. Alarm recording provides more pictures during the alarm. Emergency recording activates alarm recording even if the VCR is off, stopped, or in timer recording/standby .
40 Pelco Manual C649M (7/99) 8.3.4 Emer gency Recor ding Emergency alarm recording can start when an alarm is triggered even if the VCR is stopped or is programmed for timer recording. 1. T urn the JOG dial to select EMERGENCY REC and turn the SHUTTLE ring to the right.
Pelco Manual C649M (7/99) 41 Figure 25. Playback Controls 1. Set VIDEO MODE in the First Time Set Up menu for either color or black and white. When black and white is set, color recordings are played in black and white. 2. Load a pre-recorded tape. (If the erasure prevention tab has been removed, the VCR automatically begins playback mode.
42 Pelco Manual C649M (7/99) 9.1.1 Playback Mode • T ape recorded in SP mode: When you press the REC/PLA Y MODE button, playback mode is switched in the following order: 2H, L24H, 24H, 48H, 72H, 96H, 120H, 168H, 0H, 2H.
Pelco Manual C649M (7/99) 43 9.2.1 Shuttle Ring Y ou can use the SHUTTLE ring to adjust the playback speed. 1. Press the PLA Y button to begin playback. 2. Press the P AUSE/SHUTTLE HOLD button to get a still picture. 3. Turn the SHUTTLE ring to the appropriate angle for the playback speed you want.
44 Pelco Manual C649M (7/99) 9.2.3 Still Picture Y ou can get a still picture by pressing the P AUSE/SHUTTLE HOLD button during playback. Press it again to resume normal playback. 9.2.4 Frame-by-Frame Playback Y ou can use the JOG dial to advance the tape frame by frame.
Pelco Manual C649M (7/99) 45 9.3.2 Skip Search The VCR will fast forward or rewind until it finds an index signal. It then plays back for about four seconds in 2H or 6H mode. It repeats this process until reaching the end or beginning of the tape. 1. Press the COUNTER MEMOR Y/SKIP/INDEX button to illuminate SKIP on the fluorescent display .
46 Pelco Manual C649M (7/99) 9.4.2 Picture Quality Adjustment This control lets you adjust the playback picture so the outline is sharper or softer. Figure 31. Picture Quality Adjustment 9.4.3 V er tical Adjustment Do the following to reduce or eliminate picture vibration at the top and bottom.
Pelco Manual C649M (7/99) 47 10.0 ADDITIONAL FUNCTIONS AND FEA TURES 10.1 COUNTER 10.1.1 Counter Memory Press the COUNTER MEMORY/SKIP/INDEX button repeatedly until the “M” indi- cator appears on the fluorescent display . T urn the SHUTTLE ring to the right and the tape will rewind to the 00000 position of the counter and stop.
48 Pelco Manual C649M (7/99) 10.4 ELAPSED TIME DISPLA Y The elapsed time of recording and playback is stored in memory . Use the elapsed time as a guide for periodic replacement of parts. 1. Press the DISPLA Y button to display the Main menu. 2. T urn the JOG dial to select MAINTENANCE and turn the SHUTTLE ring to the right.
Pelco Manual C649M (7/99) 49 11.0 TESTING 11.1 INITIAL SYSTEM TESTING Before using the newly-installed surveillance system, do the following: • Make test recordings at the time-lapse speeds you will be using. T est how the system performs with alarms.
50 Pelco Manual C649M (7/99) 12.0 TROUBLESHOOTING 12.1 SELF-DIAGNOSTIC FUNCTION AND WARNING DISPLA Y The VCR uses self-diagnostics to detect internal malfunctions during recording. If one occurs, the VCR indicates it on the monitor and in the VCR’ s fluorescent dis- play .
Pelco Manual C649M (7/99) 51 12.2 BEFORE CALLING FOR SER VICE Symptom Remedy VCR does not operate. • Is the LOCK indicator illuminated? • Is the power cord disconnected from the AC output? • I s the TIMER REC indicator illuminated? The VCR power is on but unit does not • Is the LOCK indicator illuminated? operate.
52 Pelco Manual C649M (7/99) 13.0 SPECIFICA TIONS Power Source: 100-230 VAC, 50/60 Hz. (The included power cord is used for 120 VAC, 60 Hz) Power Consumption: Approximately 20 watts Rating: ALM/CALL/M.
Pelco Manual C649M (7/99) 53 Fast Forward/Rewind T ime: Approx. 140 sec. with T -120 cassette Horizontal Resolution: More than 240 lines (VHS mode) More than 400 lines (S-VHS, S-VHS ET modes) Audio Fr.
54 Pelco Manual C649M (7/99) NOTES.
Pelco Manual C649M (7/99) 55 NOTES.
56 Pelco Manual C649M (7/99) Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pelco c649m è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pelco c649m - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pelco c649m imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pelco c649m ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pelco c649m, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pelco c649m.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pelco c649m. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pelco c649m insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
