Manuale d’uso / di manutenzione del prodotto C586M del fabbricante Pelco
Vai alla pagina of 42
Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150 International Customers: Tel +1 (559) 292-1981 or FAX +1 .
2 Pelco Manual C586M (9/99) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND WARNINGS ................................................................ 4 DESCRIPTION .......................................................................................
Pelco Manual C586M (9/99) 3 LIST OF ILLUSTRA TIONS Figur e Page 1 Rear Panel of KDB4000V Keyboard .................................................................. 7 2 KBD4000V Interface Mounting Hole Dimensions ......................................
4 Pelco Manual C586M (9/99) IMPOR T ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes.
Pelco Manual C586M (9/99) 5 MODELS KBD4000V Keyboard for pan, tilt and lens control of variable speed receivers. Includes 5-inch (12.7 cm) diagonal color monitor . 120 V AC, 60 Hz. KBD4000V -X Keyboard for pan, tilt, and lens control of variable speed receivers.
6 Pelco Manual C586M (9/99) PROGRAMMING MODE Set switch 8 ON to program the multiplexer and camera presets and patterns from the keyboard. Set the switch OFF to disable programming. 3. Replace the cover on the back of the keyboard. 4. Peel off the protective coverings over the LED display and the LCD monitor on the keyboard.
Pelco Manual C586M (9/99) 7 Figure 2. KBD4000V Interface Mounting Hole Dimensions Figure 1. Rear Panel of KDB4000V Keyboard 2.5" (6.4 cm) RX+ RX- GND TX- TX+ 1234 ON VIDEO POWER ON OFF KBD4000V INTERF ACE INTERF ACE CABLE POWER SUPPL Y KBD4000V USER-SUPPLIED VIDEO COAX CABLE USER-SUPPLIED COMMUNICA TION CABLE 25 FOOT (7.
8 Pelco Manual C586M (9/99) POWER SUPPL Y KBD4000V INTERF ACE POWER SUPPL Y POWER SUPPL Y KBD4000V MUL TIPLEXER SERVER KBD4000V KBD4000V R+ R- T- T+ R+ R- T- T+ R+ R- T- T+ R+ R- T- T+ R+ R- T- T+ R+ .
Pelco Manual C586M (9/99) 9 POWER SUPPL Y TO KBD4000V FROM MUL TIPLEXER SERVER R+ R- T- T+ LOCAL FIRST KBD W ALL BLOCK TERMINAL 1 2 3 4 5 6 7 8 SECOND KBD W ALL BLOCK TERMINAL 1 2 3 4 5 6 7 8 12 V A C.
10 Pelco Manual C586M (9/99) UNUSED Switches 4 and 5 are not used in the multiplexer server mode. They must be placed in the OFF position. TURBO MODE Set switch 6 ON to enable the turbo pan feature. Set the switch OFF to disable the turbo pan feature.
Pelco Manual C586M (9/99) 11 OPERA TION IMPORT ANT NOTE ABOUT PROGRAMMING When the keyboard is plugged into a multiplexer or multiplexer server , the keyboard is ready to operate. However , some minimal programming may be r equired to make your system work.
12 Pelco Manual C586M (9/99) IMPORT ANT NOTE ABOUT DIFFERENCES IN SIMPLEX AND DUPLEX MUL TIPLEXER MODES OF OPERA TION The simplex multiplexer has three modes of operation: live, VCR, and record. • In the live mode, the main monitor can show live video both in full-screen or multiple-screen views.
Pelco Manual C586M (9/99) 13 1. LED DISPLA Y Displays the address of the multiplexer (from 1-16) with which the keyboard is communicating. 2. LIVE/VCR KEY Selects the source of video to display on the monitor(s). LIVE is live video from the cameras. VCR is recorded video that is played back from a VCR.
14 Pelco Manual C586M (9/99) T able C. Operation Guide NOTE: References to switch 7 in this table refer to the switch behind the panel on the back of the keyboard.
Pelco Manual C586M (9/99) 15 T able C. Operation Guide (Continued) 1. Go to the Advanced System Setup menu. 2. Move the joystick so the cursor highlights SPOT MONI- TOR DISPLA Y items. 3. Press the OPEN key until either SEQUENCE or BLANK is displayed.
16 Pelco Manual C586M (9/99) T able C. Operation Guide (Continued) 1. Press the MAIN MONITOR key . The green LED over the MAIN key lights. 2. Select the camera.
Pelco Manual C586M (9/99) 17 T able C. Operation Guide (Continued) 1. Press the SPOT MONIT OR key . The green LED over the SPOT key lights. 2. Select a camera on the multiplexer that you want to sequence.
18 Pelco Manual C586M (9/99) 1. Follow the steps under “Run a sequence of cameras from one multiplexer on the MAIN monitor” or “Run a sequence of cameras from one multiplexer on the SPOT monitor” to start sequencing the cameras on the main and spot monitors of individual multiplexers that you want to sequence.
Pelco Manual C586M (9/99) 19 1. Press the SPOT MONIT OR key . The green LED over the SPOT key lights. 2. Select the camera. Addressing by Multiplexer (Switch 7 OFF) a.
20 Pelco Manual C586M (9/99) 1. Press the MAIN or SPOT MONITOR key . The green LED over the MAIN or SPOT key lights. When using the MAIN MONITOR, the SPOT MONITOR DISPLA Y menu item in the Advanced System Setup menu must be set to TRACK MAIN (refer to the Advanced System Setup section).
Pelco Manual C586M (9/99) 21 OPERA TION KEYBOARD COMMAND RESUL T T able C. Operation Guide (Continued) 1. Press the MAIN MONIT OR key . The green LED over the MAIN key lights.
22 Pelco Manual C586M (9/99) PROGRAMMING This section applies only to programming the multiplexer . T o program the multiplexer server , refer to the server manual. Programming allows you to configure the multiplexer from the KBD4000V for the way that you want your system to operate.
Pelco Manual C586M (9/99) 23 MENUS T o program from the keyboard, the keyboard must be in main monitor mode. Press the MAIN MONITOR key . SYSTEM SETUP (View Key) T o program the main basic system parameters: 1.
24 Pelco Manual C586M (9/99) Record Speeds Sets the speed at which the VCR normally records video and the speed at which it records when there is an alarm(s). Setting the speeds in the System Setup menu also sets the speeds in the Record Setup and Custom VCR Setup menus.
Pelco Manual C586M (9/99) 25 3. Press the VIEW key for approximately three seconds. The basic System Setup menu appears (refer to Figure 8). 4. The currently selected menu item blinks. Use the joystick to highlight ADV ANCED SETUP . 5. Press the OPEN key .
26 Pelco Manual C586M (9/99) SEQUENCE - Allows you to view an individual camera or run a sequence. An alarm or activity detection will override what you are observing. When the alarm or activity detection goes away , the screen will return to the camera or sequence you were viewing.
Pelco Manual C586M (9/99) 27 7. When you have completed all the changes you want to make, go to EXIT or BASIC SETUP . 8. Press the OPEN key to exit the programming mode or to go to the basic system setup menu.
28 Pelco Manual C586M (9/99) Figure 10. Basic VCR Setting Menu T able E. VCR T ypes NTSC P AL UNIVERSAL UNIVERSAL GYYR TLC1800 ASUT A TL VCR 251 GYYR 2100 ASUTSA TL VCR 964 GYYR 2100 HD MODE BURLE TC3.
Pelco Manual C586M (9/99) 29 CUSTOM VCR SETUP (Live/VCR Key) T o program the advanced VCR parameters: 1. Press the MAIN MONITOR key . 2 . Use the number keypad to enter the address of the multiplexer (1-16 if the keyboard is connected to a multiplexer; 1-8 if the keyboard is connected to a server), then press the UNIT key .
30 Pelco Manual C586M (9/99) CAMERA SETUP (Number and CAM Keys) T o program a camera input: 1. Press the MAIN MONITOR key . 2. Select the camera. Addressing by Multiplexer (Switch 7 OFF) a.
Pelco Manual C586M (9/99) 31 Coaxitron Format EXTENDED - Use when your system has moveable cameras controlled by 32-bit Coaxitron receivers, such as Esprit, Intercept, Spectra, and LRD41C21/LRD41C22 Series. OFF - Use when your system has fixed cameras only .
32 Pelco Manual C586M (9/99) ACTIVITY DETECTION MASK SETUP Activity detection continually monitors selected camera inputs for motion. When motion is detected, the multiplexer increases the frequency with which that camera(s) is shown and recorded. Activity detection is most ef fective when only a few cameras are showing activity .
Pelco Manual C586M (9/99) 33 7. T urn activity boxes on or off (by default, all activity boxes are on). T o turn on all activity boxes, use the joystick to choose SET ALL. Press the OPEN key . All boxes will contain a symbol as shown in Figure 13. The multiplexer will monitor motion in those boxes.
34 Pelco Manual C586M (9/99) HELP MENU The Help menu is accessed from any other menu. 1. Use the joystick in any menu to highlight HELP . 2. Press the OPEN key . The Help menu appears. Figure 14. Camera Sequence Menu Figure 15. Help Menu GROUP QUAD (2x2) 1 04 2 04 3 04 4 04 NINE (3x3) 04 04 VCR/LIVE * * SIMPLEX MULTIPLEXERS SHOW “DISP/REC”.
Pelco Manual C586M (9/99) 35 MUL TIPLE CAMERA DISPLA Y SETUP The multiple camera display formats may be configured using the keyboard. The LEDs above the camera buttons on the multiplexer will illuminate to indicate which cameras are being displayed.
36 Pelco Manual C586M (9/99) PROGRAMMING THE 9-CAMERA DISPLA Y ( Key) Y ou can program two groups of nine cameras each. Both groups can be programmed to include any nine cameras. is not available in simplex RECORD mode. T o program the nine-camera displays: 1.
Pelco Manual C586M (9/99) 37 PROGRAMMING MENU DEF AUL TS T able F . Programming Menu Defaults Menu Item Default System Setup T ime Display On T itle Display On Normal Record Speed 2/6/8 Hr (NTSC/EIA) .
38 Pelco Manual C586M (9/99) PROGRAMMING A PRESET 1 . Press the MAIN or SPOT MONIT OR key . The green LED over the MAIN or SPOT key lights. When using the MAIN MONITOR, the SPOT MONITOR DISPLA Y menu item in the Advanced System Setup menu must be set to TRACK MAIN (refer to the Advanced System Setup section).
Pelco Manual C586M (9/99) 39 TROUBLESHOOTING If you have difficulty operating your system, run through the following checklist to see if you can solve the problem. 1. Are the keyboard switches set properly? 2. Is the equipment wired properly? 3. Are the menu options in the multiplexer(s) and server set properly? 4.
40 Pelco Manual C586M (9/99) 17. If you have a server and cannot change between full screen and multiple screen views on the main monitor , check the MAIN MONIT OR CONTROL setting in the Monitor menu of the server .
Pelco Manual C586M (9/99) 41 SPECIFICA TIONS ELECTRICAL Input V oltage: +12 VDC @ 1A Power Consumption: 8 watts Joystick: Three-axis, vector solving, with twisting, return-to-center head Data Interface: RS-485, 25-foot (7.
42 Pelco Manual C586M (9/99) REVISION HISTOR Y Manual # Date Comments C586M 9/99 Original version. Pelco, the Pelco Logo, Camclosure, Esprit, Genex, Intercept, Legacy , and Spectra are registered trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pelco C586M è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pelco C586M - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pelco C586M imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pelco C586M ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pelco C586M, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pelco C586M.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pelco C586M. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pelco C586M insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
