Manuale d’uso / di manutenzione del prodotto C1973M-B del fabbricante Pelco
Vai alla pagina of 12
MRD1400HZ16 Camera Contr ol Inter face for the CC1400HZ16 Installation/ Operation Manual C1973M-B (8/03) ® P elco • 3500 P elco Wa y • Clovis, CA 93612-5699 USA • www .
2 Pelco Manual C1973M-B (8/03) LIST OF T ABLES T able Page A Baud Rate Switch Settings ................................................................................ 4 B MRD DIP Switch Settings .......................................................
Pelco Manual C1973M-B (8/03) 3 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and con- form to all local codes.
4 Pelco Manual C1973M-B (8/03) DESCRIPTION The MRD1400HZ16 is a camera interface control for Pelco’s CC1400HZ16 Series digital color camera. The unit can be mounted directly to a wall or installed in a DF5 Series dome, DF8A Series dome, EH2512 Series enclosure, or EH3512 Series enclosure.
Pelco Manual C1973M-B (8/03) 5 MRD ADDRESS SETTINGS A camera address setting is required for the controller/switcher to communicate with the MRD1400HZ16. The default setting for the MRD is Receiver Address 1. If you are using more than one MRD, each unit must have a different Receiver Address.
6 Pelco Manual C1973M-B (8/03) MRD1400HZ16 INST ALLA TION METHODS There are three methods of installation for the MRD1400HZ16. The unit can be mounted directly to a wall, or installed inside a dome or enclosure using the supplied mount adapters. Refer to the following sections and select the correct installation method for your application.
Pelco Manual C1973M-B (8/03) 7 Figure 3. DF5/DF8 Installation Figure 4. Removing the MRD Board CAMERA BRACKET DOME MRD1400HZ16 AND MOUNT ADAPTER 01212 POWER LED RESET BUTTON DA T A LED 01216.
8 Pelco Manual C1973M-B (8/03) EH3512 SERIES ENCLOSURE INST ALLA TION Do the following to install the MRD1400HZ16 in an EH3512 Series enclosure: 1. Remove the camera sled from the EH3512 Series enclosure. If the camera is attached to the sled remove the camera.
Pelco Manual C1973M-B (8/03) 9 EH2512 SERIES ENCLOSURE INST ALLA TION T o install the MRD1400HZ16 in an EH2512 Series enclosure: 1. Remove the PC board from the MRD1400HZ16. T o remove the board: a. Unscrew the two Phillips button head screws from the unit (refer to Figure 2), and remove the cover .
10 Pelco Manual C1973M-B (8/03) CONTROL, POWER, AND CAMERA CONNECTIONS 1. Refer to Figure 8 and T able C. Connect the control wires from the controller to the MRD DA T A IN connector . Use the supplied four-pin connector . T o connect multiple units with parallel connections refer to Figure 9.
Pelco Manual C1973M-B (8/03) 11 OPERA TION CAMERA OPERA TION PELCO CONTROLLER COMMAND Zoom In T ilt joystick up Zoom Out T ilt joystick down Quickly Zoom In Press the Zoom T ele button or turn the joy.
12 Pelco Manual C1973M-B (8/03) REVISION HISTOR Y Manual # Date Comments C1973M 10/01 Original version. C1973M-A 8/02 Revised instructions. C1973M-B 8/03 Revised supplied parts list and installation instructions for DF5/DF8 and EH2512 enclosures. TROUBLESHOOTING Problem Possible Cause and Solutions Unit does not operate.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pelco C1973M-B è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pelco C1973M-B - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pelco C1973M-B imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pelco C1973M-B ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pelco C1973M-B, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pelco C1973M-B.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pelco C1973M-B. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pelco C1973M-B insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.