Manuale d’uso / di manutenzione del prodotto HDS200 del fabbricante Peerless Industries
Vai alla pagina of 36
ISSUED: 07-24-12 SHEET #: 180-9023-1 User Manual and Installation Guide Pro Wireless Multimedia Kit Models: HDS200 HDS200-2 HDS200-3 HDS200-4 REA D Y ®.
.
3 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Contents Safety Precautions ...........................................................................................................................................4 Proper Care and Safety ..............
4 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Please read this manual before using the product. • Unit can be placed vertically (preferred) or horizontally . • T o clean, use a soft, dry cloth only . Do not use water or other cleaning products as they may cause electrical failure or damage the surface of the product.
5 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 HD Flow Pro Wireless Multimedia Kit provides Full HD 1080p signal transfer , including 3D signal*, without the hassle of running cables.
6 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 2 x HDMI up to 1080p (60Hz) 1 x Composite 1 x YPbPr Component 1 x HDMI up to 1080p (60Hz) 1 x Composite 1 x YPbPr Component H.264 Baseline Profile with Level 4.2 HDCP compliant Wireless Connection Supporting IEEE 802.
7 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Video Format Supported • Digital Video º HDMI - Up to 1080p @ 24Hz, 25Hz, 30Hz, 50Hz, 60Hz • Analog Video º Composite – 480i @ 60Hz, 70Hz, 85Hz º .
8 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 T ransmitter Front 1 2 3 4 5 6 7 T ransmitter.
9 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 T ransmitter Front 1. Power/Link Indicator Light • Blinking indicator light - System booting or establishing link between the T ransmitter and the Receiver . • Quick blinking indicator light - Software upgrading or wireless/LAN mode switching.
10 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 2 T ransmitter Back 1 3 4 5 6 7 8.
1 1 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 T ransmitter Back 1. HDMI 1 IN • HDMI1 input port 2. HDMI 2 IN • HDMI2 input port 3. A V -IN • Composite input port 4. IR-OUT • Connects IR Flasher to the T ransmitter for remote control of external devices which are connected to the T ransmitter (i.
12 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 2 3 4 5 6 Receiver Front Receiver.
13 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Receiver Front 1 . Power/Link • Blinking indicator light - System booting or establishing link between the T ransmitter and the Receiver . • Rapid blinking indicator light - Software upgrading or wireless/LAN mode switching.
14 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 2 3 4 5 6 7 8 Receiver Back.
15 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Receiver Back 1. HDMI-OUT • HDMI output port 2. A V -OUT • Composite output port 3. IR-IN • Connects the IR Extender in order to extend IR reception range. 4. AUDIO-OUT* • Stereo audio output port 5.
16 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 4 3 6 7 2 5 8 1 . POWER Button - T urns the T ransmitter and Receiver power ON/OFF . • ON: If the T ransmitter and Receiver are powered off and the Po.
17 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 3. VIDEO OUT (Receiver) - Selects the Audio/Video output port of the Receiver . • HDMI - Selects HDMI as the Audio/Video output. • Component - Selects Component as the Audio/Video output. • A V - Selects A V as the Audio/Video output.
18 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Installing the Remote Control Battery The battery slip is located on the bottom of the remote control. Step 1 Push the tab, located on the left of the battery slip, to the right and pull out the slip.
19 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Before starting the installation, please ensure that all source components (Blu-ray player , cable box, etc.) and the display equipment (TV , display , projector , etc.) are turned off. Step 1 Connecting Source Components T o The T ransmitter A.
20 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 A. Connect the provided IR Flasher to the IR-OUT port of the T ransmitter . B. Find the location of the IR widow on your component and adhere the IR Flasher Eye directly over the IR window of your component.
21 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Step 5 Powering-up the HD Flow Multimedia Kit Plug in the power adapters for the T ransmitter and the Receiver to available power outlets. Plug in the other end of the power cable to the T ransmitter and then to the Receiver .
22 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 While turning on the display device, the HD Flow Pro Wireless Multimedia Kit will be going through the start up process. The process takes about 1.5 to 2 minutes to complete. The Power/Link Indicator Light on the T ransmitter and the Receiver should be fl ashing at fi rst.
23 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Notes: 1. Audio and video sources will switch simultaneously whether using the remote or Power/Source Selection Button.
24 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Notes: 1. We recommend that you disconnect and then re-connect the LAN cable to ensure LAN operation. Once video and audio come back up, the process is complete.
25 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Step 5 Under the heading “Streaming I/F” use the pull down menu to change WiFi to LAN. Step 6 Enter the proper IP address, for the unit being set up, based on the network's domain. Step 7 Once all the settings have been entered click the Submit button at the bottom of the form.
26 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Receiver • HDMI, COMPO, A V - The indicator light will be solid for the selected port as long as the output cable is present and connected to the output device. If no output device is detected by the selected output port, the indicator light will be fl ashing.
27 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Note: Peer-to-Peer units can be con fi gured to multicast mode using the USB Multicast Set-Up Method or LAN Multicast Set-Up Method. Additional Receivers (HDS200-R) are required and sold separately . Please visit http://www .
28 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Q. What compression standard does the HD Flow use to stream Full HD 1080p content? A. H.264 Baseline Pro fi le Level 4.2 video compression. Q. Does HD Flow Pro Wireless Multimedia Kit deliver 5.1 audio? A.
29 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Q. Can the HD Flow Pro Wireless Multimedia Kit be set to default to a speci fi c input/output if the unit is turned off or power is lost? A. Y es, the HD Flow Pro Wireless Multimedia Kit can be set to desired input and output ports via a programming page that can be accessed by using LAN programming.
30 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Factory Reset CAUTION Factory reset will revert all settings to factory defaults. It is not recommended to perform factory reset on multicast systems (systems that have two or more Receivers). If there are issues with multicast systems, please reference http://www .
31 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 How to Check Firmware V ersion Step 1 Connect the Receiver that needs its fi rmware to be checked to the display device (reference the installation section of this manual).
32 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 HDMI D Ͳ Sub AV(CVBS) HDMI COMP AV(CVBS) OO X O X X OO X O X X OO X O X X OO X O X X OO X O X X OO X O X X OO X O ^ X OO X O X X OO X O X X OO X O ^ X OO.
33 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
34 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 YEAR LIMITED W ARRANTY The HDS200 is distributed by Peerless Industries, Inc. using the highest quality components and technology available.
35 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Customer Care Need help with installation or set up? Call Peerless-A V Customer Care 1-1-800-865-21 12 (available 7:00am- 7:00pm CST , Monday - Friday), or email us at info@peerless-av .com. Peerless -A V 2300 White Oak Circle Aurora, IL 60502 USA www .
Distributed exclusively by Peerless Industries, Inc. 2300 White Oak Circle, Aurora, IL 60502 USA 1-800-865-21 12 www .peerless-av .com www .hd fl ow .com ©2012 Peerless-A V . All rights reserved. Peerless-A V is a trademark of Peerless Industries, Inc.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Peerless Industries HDS200 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Peerless Industries HDS200 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Peerless Industries HDS200 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Peerless Industries HDS200 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Peerless Industries HDS200, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Peerless Industries HDS200.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Peerless Industries HDS200. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Peerless Industries HDS200 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
