Manuale d’uso / di manutenzione del prodotto 684 Plus del fabbricante Peavey
Vai alla pagina of 18
O WNER ’ S M ANUAL XR ® 684/XR ® 684+ Stereo Powered Mixer.
2 Intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
XR ™ 684/684+ Powered Sound Reinforcement Mixing Console General Description: Congratulations on your purchase of the XR ™ 684/684+ powered mixer . Within one compact unit, we have packed feature after feature, each displaying the latest technology available.
CHANNEL SECTION: CHANNELS 1-4 1. MIC INPUT : XLR balanced, low-impedance channel input optimized for a microphone or other low-level source. Pin 2 is the positive input. Because of the wide range of gain adjustment, signal levels as high as +10 dBV (2.
NOTE: Channels 5-9 contain features that differ from the previous channels. Only those features are mentioned below . For information on features not mentioned please refer to the section for Channels 1-4. CHANNELS 5-6 10. LINE: 1/4" balanced TRS input for line level signals.
17. PRESET : Selects the effect preset from the list below . EFX Presets PRESET NAME TIME/SIZE COLOR/TONE 1 Chamber T ime: 150 to 5,000 ms Damping (High Frequency) 2 Plate T ime: 100 to 4,000 ms Dampi.
26. MAIN LEVEL: This is the master level control for the main mix sent to the Left/Mono and Right output jacks. This control sets the Main level going to the power amp when in Main/Monitor mode (see System Mode #24). A good starting position for this control is the center detent position (12:00).
30. LEFT/MONO OUTPUT : This 1/4" jack provides an output from the Left Main mix to supply external amp/speaker combinations. The level of this signal is determined by the Main Level control. When no plug is connected to the Right Output (#31) then the right signal is mixed with the left, and both can be accessed at the Left/Mono Output.
9 CHANNELS 1-4 HI-Z INPUT MIC PREAMP PA D TONE CONTROL LO MID HI +48V PHANTON LO-Z INPUT CHANNELS 5-6 LINE INPUT MIC PREAMP +48V PHANTON LO-Z INPUT MONITOR SEND CHANNEL GAIN EFX LEVEL TONE CONTROL CHA.
XR ® 684 LEVEL DIAGRAM 10 INPUTS HI-Z (W/P AD) LINE/T APE LO-Z MIC (W/P AD) LO-Z MIC (NO P AD) HI-Z MIC (NO P AD) -60 -50 -40 -30 -20 -10 0 dBu +10 +20 +30 +21 dBu +13.5 dBu -1 1 dBu -12.5 dBu -28 dBu -35 dBu -60 dBu 2 dBu = 0 dBV -15 dB +15 dB EQ XR 684 LEVELS ® MONITOR OUT +22 dBu MAX T APE OUT +10 dBV MAX -10 dBV NOM.
11 Left/Monitor Outputs (Rear) Right/Main Outputs (Rear) Impulse ™ 200 Impulse ™ 200 Mains - Left Mains - Right Mode Switch Out Ke yboard PVM ™ 22 Reactor ® MA Q ™ 150 SP ™ 112M Out T ape P.
Left/Monitor Outputs (Rear) Right/Main Outputs (Rear) Impulse ™ 200 Monitors Mains Mode Switch Depressed (In) PVM ™ 22 Reactor ® Ke yboard Out T ape Player T ape Player In Stereo V oice Module L .
XR ™ 684 SPECIFICA TIONS : Input Specifications: Function Input Z Input Gains Input Levels Bal/ Connector (ohms) control Min** Nominal* Max UnBal. Min setting Lo-Z 2 k Max w/o pad -60 dBu -30 dBu -1 1 dBu Bal. XLR: Pin 1 Gnd, (150 ohms) (50 dB) Pin 2 (+), Pin 3 (-) Channel 1-8 Max.
Frequency Response: Mic Input to L - R Output Line Input to L - R Output T o Power Amplifier Output 20 Hz — 20 kHz +0 dB/-1 dB 20 Hz — 20 kHz +0 dB/-1 dB 20 Hz — 20 kHz +0 dB/-1 dB Graphic Equal.
15 POWER SECTION (400 SC Module with DDT ™ ) Frequency Response: +0, -1 dB, 20 Hz — 20 kHz @ rated power Rated Power: • 210 watts RMS into 4 ohms, both channels driven • 150 watts RMS into 8 ohms, both channels driven • Bridge out 420 watts into 8 ohms* * 8 ohms minimum load for bridge output only T otal Harmonic Distortion: Less than .
34 PEA VEY ELECTRONICS CORPORA TION LIMITED W ARRANTY Effective Date: July 1, 1998 What This W arranty Covers Y our Peavey Warranty covers defects in material and workmanship in Peavey products purchased and serviced in the U.
IMPOR T ANT SAFETY INSTRUCTIONS W ARNING: When using electric products, basic cautions should always be followed. including the following. 1. Read all safety and operating instructions before using this product. 2. All safety and operating instructions should be retained for future reference.
Features and specifications subject to change without notice. Peavey Electronics Corporation • 71 1 A Street • Meridian • MS • 39301 (601) 483-5365 • F AX (601) 486-1278 • www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Peavey 684 Plus è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Peavey 684 Plus - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Peavey 684 Plus imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Peavey 684 Plus ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Peavey 684 Plus, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Peavey 684 Plus.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Peavey 684 Plus. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Peavey 684 Plus insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
