Manuale d’uso / di manutenzione del prodotto 2168 del fabbricante Patton electronic
Vai alla pagina of 28
USER MANUAL CopperLink™ Ether net Extenders Model 2158 & 2168 SALES OFFICE (301) 975-1000 TECHNICAL SUPPOR T (301) 975-1007 P ar t# 07M2158_2168 Rev .
2 CONTENTS 1.0 Warranty Information ................................................................. 4 1.1 Radio and TV Interference ............................................................ 4 1.2 CE Notice ........................................
3 D CopperLink Series Interface Pin Assignment ........................ 25 D.1 10/100Base-T Interface .............................................................. 25 RJ-45 .............................................................................
4 1.0 W ARRANTY INFORMATION P atton Electronics warrants all CopperLink Ethernet Extender compo- nents to be free from def ects, and will—at our option—repair or replace the product should it f ail within one year from the first date of the ship- ment.
5 1.3 SERVICE All warranty and non-w arranty repairs must be returned freight prepaid and insured to P atton Electronics. All returns must hav e a Return Mater i- als A uthorization number on the outside of the shipping container .
6 2.0 GENERAL INFORMATION Thank you f or your purchase of this P atton Electronics product. This product has been thoroughly inspected and tested and is warranted f or one year f or par ts and labor . If any questions or problems arise during installation or use of this product, contact P atton Electronics T echnical Suppor t at +1 (301) 975-1007.
7 passing pack ets across the CopperLink link that are meant for the remote peered LAN. Figure 1. T ypical application The CopperLink/L modem and CopperLink/R modem work together to create a transparent e xtension between two peered Ethernet LANs. Figure 1 shows a typical point-to-point application.
8 3.0 INSTALLATION Because the CopperLink Ethernet Extender requires no configuration, it can be installed quickly . If you are installing a standalone unit, ref er to section 3.1 “Standalone unit installation”. Otherwise, refer to section 3.2 “Rack card installation”.
9 3.2 RACK CARD INSTALLATION The CopperLink Ethernet Extender rack card comprised a front card and a rear card.Do the f ollowing to install the cards into the rac k chassis: 1. Slide the rear card into the back of the chassis along the metal r ails. 2.
10 6. Connect the Ether net interface (ref er to section 3.4, “Connecting the 10/100Base-T Ethernet Interface” on page 11). 3.3 CONNECTING THE T WISTED-PAIR LINE INTERFACE The CopperLink Ethernet Extender suppor ts communication betw een two peer Ethernet LAN sites over a distance of up to 6,000 ft (1.
11 The terminal bloc k connector on the CopperLink Ethernet Extender's twisted pair interf ace is polarity insensitive and is wired f or a two-wire interf ace. The signal/pin relationships is shown in Figure 5. Figure 5. CopperLink Ethernet Extender twisted pair line interface.
12 Connecting the 10/100Base-T Ethernet P or t to a Hub The CopperLink Ethernet Extender 10/100Base-T interface is configured as DTE (Data T er minal Equipment), just like a 10/100Base-T network interf ace card in a PC . Theref ore, it “expects” to connect to a 10/100Base-T Hub using a straight-through RJ-45 cab le.
13 DC power (supplied via the po wer supply jack to the CopperLink Ether- net Extender) must meet the f ollowing requirements; DC power supplied must be regulated +5VDC ±5%, 1.0A minimum. Center pin is +5V . The barrel type plug has a 2.5/5.5/10mm I.
14 4.0 CONFIGURATION (MODEL 2168 ONLY) The CopperLink Ethernet Extender has eight DIP switches f or configur- ing the unit f or a wide variety of applications.
15 Figure 10. Model 2168 standalone modem DIP switch orientation Figure 11. Model 2168 rack card DIP s witch orientation.
16 4.2 CONFIGURING DIP SWITCH S1 DIP s witch S1 is where you configure the CopperLink line r ate, symmet- ric or asymmetr ic, Ethernet full auto negotiation capability (100Base-T full or half duple x, 10Base-T full or half duple x) or limited auto sense (only 100Base-T half duple x, 10Base-T full or half duple x).
17 T able 3: Asymmetric CopperLink Line Rates Selection Char t S1-2 S1-3 S1-4 Asymmetric Line Rates DS/US OFF OFF ON 4.17 Mbps/1.56 Mbps (Mode 0) OFF ON ON 9.
18 5.0 OPERATION Once the CopperLink Ethernet Extenders are proper ly installed, they should operate transparently . No user settings required. This section describes reading the LED status monitors. 5.1 POWER UP Bef ore applying power to the CopperLink Ethernet Extender , please re view section 3.
19 T able 5: F ront panel LED descr iption for standalone modem LED Description Po w e r On (green) when power is applied to the unit. Off when no power is applied to the unit. CopperLink - Link On (green) when the end-to-end CopperLink link between the units is estab lished.
20 Figure 13. CopperLink Ether net Extender rack card front panel T able 6: F ront panel LED description for rack card modem LED Description P ower Solid GREEN to indicate the unit is powered on.
21 APPENDIX A SPECIFICATIONS A.1 LAN CONNECTION • Shielded RJ-45, 10/100Base-T , IEEE 802.3 Ether net • CopperLink Connection: RJ-45 and T er minal Block A.2 T RANSMISSION LINE T wo-wire unconditioned twisted pair. A.3 COPPERLINK LINE RATE Model 2168 —16.
22 A.8 T EMPERATURE RANGE 32–122°F (0–50°C) A.9 HUMIDITY Up to 90% non-condensing. A.10 DIMENSIONS 1.58H x 4.16W x 3.75D in. (10.6H x 4.1W x 8.8D cm).
23 APPENDIX B MODEL 2158 SERIES F ACTOR Y REPLACEMENT P AR TS AND ACCESSOR IES *Only required with optional UI power supply (08055DCUI) P atton Model # Description Base Models 2158/L Local CopperLink .
24 APPENDIX C MODEL 2168 SERIES F ACTOR Y REPLACEMENT P AR TS AND ACCESSOR IES *Only required with optional UI power supply (08055DCUI) P atton Model # Description Base Models 2168RC/L Local Multi Rat.
25 APPENDIX D COPPERLINK SERIES INTERFACE PIN ASSIGNMENT D.1 10/100BASE-T INTERFACE RJ-45 • Pin 1: TX+ • Pin 2: TX- • Pin 3: RX+ • Pin 6: RX- • Pins 4, 5, 7, 8: no connection D.2 COPPERLINK INTERFACE RJ-45 • Pin 4: RING • Pin 5: TIP • Pins 1, 2, 3, 6, 7, 8: no connection T erminal Block See Figure 5 on page 11.
26 APPENDIX E DISTANCE CHAR T, BASED ON 24 A WG (0.5 MM) Note Model 2158 is fixed at 12.5 Mbps , 4,000 ft (1,220 m). Symm Line Rate (DS/US) Distance in feet (km) 6.25 Mbps 4,500 (1.37) 9.38 Mbps 4,150 (1.26) 12.5 Mbps 4,000 (1.22) 16.67 Mbps 3,300 (1.
27 Notes _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________.
28 Notes _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Patton electronic 2168 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Patton electronic 2168 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Patton electronic 2168 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Patton electronic 2168 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Patton electronic 2168, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Patton electronic 2168.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Patton electronic 2168. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Patton electronic 2168 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
