Manuale d’uso / di manutenzione del prodotto 2085 del fabbricante Patton electronic
Vai alla pagina of 20
USER MANUAL SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part# 07M2085-D Doc# 047033U, Rev . E Revised 1/22/08 MODEL 2085 High Speed RS-232 to RS-485 Interface C.
1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 2085 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.
1.3 SERVICE All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container . This number may be obtained from Patton Electronics T echnical Service: (301) 975-1007, http://www .
2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Y ear parts and labor .
3.0 CONFIGURA TION The Model 2085 is configured using an eight position DIP switch and a DCE/DTE switch. Figure 1 (below) shows the location of the DCE/DTE switch (externally accessible) on the PC board, as well as the power supply daughter board and terminal block.
3.1 SETTING THE DCE/DTE SWITCH For your convenience, the Model 2085 has an externally accessible DCE/DTE switch. If the device connected to the Model 2085 is a modem or multiplexer (or is wired like one), set the switch to “DTE”. This setting causes the Model 2085 to behave like Data T erminal Equipment and transmit data on pin 2.
4.1.3 4-WIRE CONNECTION USING TERMINAL BLOCKS If your RS-485 application requires you to connect two pairs of bare wires to the Model 2085, you will need to open the case to access the terminal blocks.
S1-4: Echo Mode The setting for switch S1-4 determines whether the Model 2085 echoes data back to the transmitting device (half-duplex mode only). S1-4 Setting On Echo On Off Echo Off S1-5: Carrier Control Method The setting for switch S1-5 determines whether the carrier is “Constantly On” or “Controlled by RTS”.
3.4 CONFIGURA TION SWITCH APPLICA TIONS The switch settings generally needed to configure the Model 2085 for various applications are shown in the table below . Note: Do not change switch settings until you have carefully read Section 3.3. 8 S1-1: “Xmt Off” Imp.
3.4 CONFIGURA TION SWITCH APPLICA TIONS The switch settings generally needed to configure the Model 2085 for various applications are shown in the table below . Note: Do not change switch settings until you have carefully read Section 3.3. 8 S1-1: “Xmt Off” Imp.
S1-4: Echo Mode The setting for switch S1-4 determines whether the Model 2085 echoes data back to the transmitting device (half-duplex mode only). S1-4 Setting On Echo On Off Echo Off S1-5: Carrier Control Method The setting for switch S1-5 determines whether the carrier is “Constantly On” or “Controlled by RTS”.
4.1.3 4-WIRE CONNECTION USING TERMINAL BLOCKS If your RS-485 application requires you to connect two pairs of bare wires to the Model 2085, you will need to open the case to access the terminal blocks.
3.1 SETTING THE DCE/DTE SWITCH For your convenience, the Model 2085 has an externally accessible DCE/DTE switch. If the device connected to the Model 2085 is a modem or multiplexer (or is wired like one), set the switch to “DTE”. This setting causes the Model 2085 to behave like Data T erminal Equipment and transmit data on pin 2.
3.0 CONFIGURA TION The Model 2085 is configured using an eight position DIP switch and a DCE/DTE switch. Figure 1 (below) shows the location of the DCE/DTE switch (externally accessible) on the PC board, as well as the power supply daughter board and terminal block.
2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Y ear parts and labor .
1.3 SERVICE All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container . This number may be obtained from Patton Electronics T echnical Service: (301) 975-1007, http://www .
1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 2085 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.
APPENDIX B P A TTON MODEL 2085 RS-232 PIN CONFIGURA TIONS Copyright © Patton Electronics Company 1- (FG) Frame Ground 2- (TD) Transmit Data T o Model 2085 3- (RD) Receive Data From Model 2085 4- (RTS.
APPENDIX B P A TTON MODEL 2085 RS-232 PIN CONFIGURA TIONS Copyright © Patton Electronics Company 1- (FG) Frame Ground 2- (TD) Transmit Data T o Model 2085 3- (RD) Receive Data From Model 2085 4- (RTS.
USER MANUAL SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part# 07M2085-D Doc# 047033UD, Rev . E Revised 1/22/08 MODEL 2085 High Speed RS-232 to RS-485 Interface .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Patton electronic 2085 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Patton electronic 2085 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Patton electronic 2085 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Patton electronic 2085 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Patton electronic 2085, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Patton electronic 2085.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Patton electronic 2085. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Patton electronic 2085 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
