Manuale d’uso / di manutenzione del prodotto 1068 del fabbricante Patton electronic
Vai alla pagina of 27
USER MANUAL VLINK MODEM Model 1068 and 1058 SALES OFFICE (301) 975-1000 TECHNICAL SUPPOR T (301) 975-1007 P ar t# 07M1068-UM Doc# 05816U2-001 Rev . A Revised 10/17/06 An ISO-9001Cer tified Company.
2 CONTENTS 1.0 Warranty Information ................................................................. 4 1.1 Radio and TV Interference (FCC Part 15) .................................... 4 1.2 CE Declaration of Conformity ...............................
3 Terminal Block (1068DV/TB45 Only) ......................................... 24 C.3 POTS/ISDN Interface .................................................................. 24 RJ-45 ......................................................................
4 1.0 W ARRANTY INFORMATION P atton Electronics warrants all VLINK modem components to be free from def ects, and will—at our option—repair or replace the product should it f ail within one year from the first date of the shipment.
5 The saf ety advice in the documentation accompan ying this product shall be obey ed. The conf ormity to the above directiv e is indicated by the CE sign on the de vice. 1.3 SERVICE All warranty and non-w arranty repairs must be returned freight prepaid and insured to P atton Electronics.
6 2.0 GENERAL INFORMATION Thank you f or your purchase of this P atton Electronics product. This product has been thoroughly inspected and tested and is warranted f or one year f or par ts and labor .
7 • A vailable in r ack-mount or standalone configurations • Made in the USA 2.2 DESCRIPTION The P atton Electronics VLINK/CO and VLINK/CP VDSL modems provide high-speed LAN connections between peered Ethernet LANs, remote PCs, or an y other network enabled 10/100Base-T de vice.
8 3.0 INSTALLATION Because the VLINK modem requires no configuration, it can be installed quickly . If you are installing a standalone unit, ref er to section 3.1 “Standal- one unit installation”. Otherwise, ref er to section 3.2 “Rack card installation”.
9 3.2 RACK CARD INSTALLATION The VLINK modem rack card comprised a front card and a rear card.Do the f ollowing to install the cards into the rac k chassis: 1. Slide the rear card into the back of the chassis along the metal r ails. 2. Secure the rear card using the supplied metal screws .
10 6. Connect the Ether net interface (ref er to section 3.4, “Connecting the 10/100Base-T Ethernet Interface” on page 11). 3.3 CONNECTING THE T WISTED-PAIR LINE INTERFACE The VLINK modem suppor ts communication between two peer Ethernet LAN sites ov er a distance of up to 6,000 ft (1.
11 The terminal bloc k connector on the VLINK modem's twisted pair inter- f ace is polarity insensitive and is wired f or a two-wire interf ace. The signal/pin relationships is shown in Figure 5. Figure 5. VLINK modem (terminal block v ersion) twisted pair line interface (Model 1068D V/TB45) 3.
12 3.5 CONNECTING THE POTS/ISDN LINE The RJ-45 por t labeled “PO TS/ISDN” is the PO TS/ISDN interf ace . A tele- phone or an ISDN de vice ma y be connected to this port and carr ied ov er the VDSL line. The units do not need power f or the PO TS interf ace to work.
13 4.0 CONFIGURATION The Model 1068 VLINK modem has eight DIP switches f or configuring the unit f or a wide variety of applications. This section descr ibes switch locations and e xplains the diff erent configurations. No dip switch options are av ailable on the 1058.
14 Figure 9. Model 1068 standalone modem DIP switch orientation Figure 10. Model 1068 rack card DIP s witch orientation Power VLINK Modem Link QOL VLINK Link Activity Ethernet 1234 ON Push toggle to l.
15 4.2 CONFIGURING DIP SWITCH S1 DIP s witch S1 is where you configure the VDSL line rate, symmetric or asymmetric, Ethernet full auto negotiation capability (100Base-T full or half duple x, 10Base-T full or half duple x) or limited auto sense (only 100Base-T half duple x, 10Base-T full or half duple x).
16 T able 3: Model 1068 Asymmetric VDSL Line Rates Selection Chart S1-2 S1-3 S1-4 Asymmetric Line Rates DS/US * *. DS = downstream, US = upstream Note T ab le 3 only applies to Model 1068. OFF OFF ON 4.17 Mbps/1.56 Mbps OFF ON ON 9.38 Mbps/1.56 Mbps OFF ON OFF 16.
17 5.0 OPERATION Once the VLINK modems are properly installed, they should operate transparently . No user settings required. This section describes reading the LED status monitors. 5.1 POWER UP Bef ore applying power to the VLINK modem, please revie w section 3.
18 T able 5: F ront panel LED descr iption for standalone modem LED Description Po w e r On (green) when power is applied to the unit. Off when no power is applied to the unit. VLINK - Link On (green) when the end-to-end VDSL link between the units is established.
19 Figure 12. VLINK modem rack card front panel T able 6: Front panel LED description for r ack card modem LED Description P ower Solid GREEN to indicate the unit is powered on. VLINK modem Link (Active Green) Solid g reen (ON) to indicate that the end-to-end VDSL link betw een the VLINK modems is established.
20 APPENDIX A SPECIFICATIONS A.1 LAN CONNECTION • Unshielded RJ-45, 10/100Base-T , IEEE 802.3 Ethernet • VDSL Connection: RJ-45 and T erminal Block A.2 T RANSMISSION LINE T w o-wire unconditioned twisted pair. A.3 VDSL LINE RATE 16.67 Mbps (Model 1068 only) and 12.
21 External AC and DC options: • A C: 120 V A C , 220 V AC , and UI (120–240 V AC) • DC: 12 VDC, 24 VDC and 48 VDC A.8 T EMPERATURE RANGE 32–122°F (0–50°C) A.9 HUMIDITY Up to 90% non-condensing. A.10 DIMENSIONS 1.58H x 4.16W x 3.75D in. (10.
22 APPENDIX B MODEL 1068 SERIES F ACTOR Y REPLACEMENT P AR TS AND ACCESSOR IES P atton Model # Description Base Models 1068D VRC/CO CO V ariable Rate VDSL RC CO Rack Card; voice and data 1068D VRC/CP CP V ariable Rate VDSL CP Rack Card; voice and data 1058D VRC/CO CO Fix ed 12.
23 *Only required with optional UI power supply (08055DCUI) 48V -PSM 48 VDC Input Adapter P ower Cords* 0805US American P ower Cord 0805EUR European P ower Cord CEE 7 0805UK United Kingdom P ower Cord.
24 APPENDIX C VLINK SERIES INTERFACE PIN ASSIGNMENT C.1 10/100BASE-T INTERFACE RJ-45 • Pin 1: TX+/RX+ • Pin 2: TX-/RX- • Pin 3: RX+/TX+ • Pin 6: RX-/TX- • Pins 4, 5, 7, 8: no connection C.
25 APPENDIX D DISTANCE CHAR T, BASED ON 24 A WG (0.5 MM) Note DS/US = Downstream/Upstream. Symm Line Rate Distance in feet (km) 6.25 Mbps 4,500 (1.37) 9.38 Mbps 4,150 (1.26) * 12.5 Mbps *. This is the only option available for Model 1058. 4,000 (1.22) 16.
26 Notes _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________.
27 Cop yright © 2006 P atton Electronics Company All Rights Reser ved..
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Patton electronic 1068 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Patton electronic 1068 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Patton electronic 1068 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Patton electronic 1068 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Patton electronic 1068, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Patton electronic 1068.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Patton electronic 1068. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Patton electronic 1068 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
