Manuale d’uso / di manutenzione del prodotto NA-F80T1 del fabbricante Panasonic
Vai alla pagina of 24
Fully Automatic W ashing Machine Operating Instructions Thank you very much for purchasing Panasonic W ashing Machine. Before operating this washing machine, please read these instructions completely, paying special attentions to Safety & General Precautions.
2 Contents ITEM PAGE Safety & General Precautions 3-4 Name of parts 5 Procedures before washing 5 Determining load and detergent levels with the Quick Indication 6 Laundry Detergent 6 How to use l.
3 Do not place any burning object including burning candles or cigarettes, on top or near the washing machine. There is a danger of fi re or set deformation.
4 WARNING Do not put your hand or foot under the washing machine while the machine is operating. There is a rotating mechanism at the bottom of the machine, so you could be injured. Do not climb up or put anything heavy on the top of the machine. You could be injured due to set deformation or breakage of the washing machine.
5 3 2 1 4 5 Procedures before washing • Check the installation See pages 19~21 for details. 1 Level the washing machine by adjusting the adjustable leg and using the leveller as reference. 2 Connect the water supply hose. 3 Turn on the faucet. 4 Plug power cord into socket outlet.
6 1 Put the laundry into the machine. 2 Allow the machine to churn the laundry for 5 seconds. 3 Detergent volume indications. Press the [POWER ON] button and then press the [START/ HOLD] button after putting in the laundry. The pulsator operates for about 5 seconds without any water in the tub to measure the amount of laundry.
7 Figure A Liquid bleach level Cap mark level How to use liquid detergent Put in the liquid detergent according to the water level into the bleach / liquid detergent inlet.
8 “Economy’’ Laundering Using wash water twice Wash lightly soiled laundry in the first load. Wash heavily soiled laundry in the second load. 1. Put the laundry in the tub, and press [POWER ON]. 2. Press [WASH] button and press [START/HOLD] button.
9 Fuzzy logic control is used to recommend the proper water level and amount of detergent for the amount of laundry being done. Caution: If you need to change the [PROGRAM] and [SOAK] settings after the cycle has already started, turn the power off and on it back.
10 NORMAL Course Suitable for normal washing of casual laundry. 1 Press the [POWER ON] button and put in the laundry. 2 Press the [START/HOLD] button. • The light will indicate “NORMAL’’ Course automatically. • The machine will measure the load size without water (laundry sensing).
11 HYPER SPEEDY Course Suitable for washing lightly soiled laundry or quick wash. 1 Press the [POWER ON] button and put in the laundry. 2 Press the [PROGRAM] button two times for selecting “HYPER SPEEDY” Course. • The light will indicate “HYPER SPEEDY” Course.
12 Washable Blanket Blanket which are made of 100% synthetic fiber or 100% cotton with care symbol. (Weight per blanket is 4.2k g or less) Net can be bought in the market from authorized dealer. (AXW22I-8500) Prepare Before Washing Blanket 1. How to fold Blanket: 1 Fold the blanket in half in the lengthwise direction.
13 CLEAN WHITE Course Sauce and condiment stain are washed out without any effort. • In this course, automatic dispensing of fabric softener cannot be used. • Do not use this course for clothes not suitable for bleach, such as colored or patterned garments.
14 RESERVE Program 1 Press the [POWER ON] button and put in the laundry. 2 Choose the [PROGRAM] that suit to your laundry type. 3 Press the [RESERVE] button and select between 2 to 24 hours. 4 Press the [START/HOLD] button. • The machine will measure the load size without water (laundry sensing).
15 Cancelling end buzzer after washing 1. Press [START/HOLD] button and [POWER ON] button at the same time, release [POWER ON] button and hold [START/HOLD] button at least for 3 seconds. Two times beep sound indicates the end buzzer of washing has been cancelled.
16 Choosing Your Own Laundry Setting 7 WASH To reuse the wash water. • After washing, the wash water is left in the tub and the machine stop operation. • Select the time for washing as desired. • The time selection is depend on the program chosen.
17 Maintenance Lint fi lter / Water supply hose fi lter / Main unit and tub • Be absolutely sure to follow the procedures as described, otherwise water will spray out. 1. Turn off the water faucet. 2. Press the [POWER ON] button. 3. Press the [START/HOLD] button.
18 Please observe the following Instructions shut off After fi nishing don’t forget:- • Please shut off the faucet. • Please don’t let water store for a long time. w This is to prevent water soaking. Do not put any type of charger stand on the washing machine.
19 How to install Placement Establish a ground (In case of two-wire power cords) • When there is a grounding receptacle on power supply outlet. • When carbon ground rod (sold separately) is used. • Do not connect to gas pipe, water pipe, or ground wire of telephone or lighting rod.
20 A B Connect the water supply hose That the appliance is to be connected to the water faucet using new water tap adaptor and water supply hose and that old one should not be reused. 1. Loosen the 4 screws on the water tap adaptor just enough to slip the adaptor over the mouth of the faucet.
21 Screws Figure 3 Bottom Cover Base Figure 2 3 3 4 1 2 Changing the position of the drain hose Depending on the drain location, the position of the drain hose can be changed to the left side of the washing machine. Changing the position from the right to the left side 1 Remove the screw af fi xing the part A connection port.
22 Troubleshooting Symptoms Causes Machine begins fi lling water in the middle of the wash. • When the laundry amount is large at the HIGH water level, the machine sometimes fi lls automatically. When level goes down, the machine fi lls automatically.
23 Error Indication If the following indications appear on the display panel (buzzer sounds, U and H Characters appear). Speci fi cation Model NA-F90T1 NA-F80T1 Voltage 220 – 240V~ 220 – 240V~ 50 Hz 50 Hz Power consumption 470 W 450 W Standard water amount 71 L 69 L Maximum capacity 9.
NA-F90T1 80T1_EN.indd 24 NA-F90T1 80T1_EN.indd 24 9/17/08 9:45:59 AM 9/17/08 9:45:59 AM.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Panasonic NA-F80T1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Panasonic NA-F80T1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Panasonic NA-F80T1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Panasonic NA-F80T1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Panasonic NA-F80T1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Panasonic NA-F80T1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Panasonic NA-F80T1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Panasonic NA-F80T1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
