Manuale d’uso / di manutenzione del prodotto KX-TG5832AL del fabbricante Panasonic
Vai alla pagina of 68
This unit is comp atible with Caller ID. T o use this feature, you must subscribe to the appropriate service of fered by your service provider . Please read these Operating Instruct ions before using the unit and save for future reference. Charge the battery for 6 hours before initial use.
T able of Contents 2 Introduction Your phone . . . . . . . . . . . . . . . . . . . . 4 Accessory informat ion . . . . . . . . . . . . . . 5 Important safety inst ructions . . . . . . . . . 6 For best performance . . . . . . . . . . . . . . . 8 Preparation Connections .
T able of Contents 3 Listening to messages . . . . . . . . . . . . . 43 Listening to messages using the base unit . . . . . . . . . . . . . . . . . . . . . . . . . 43 Listening to messages using the handset . . . . . . . . . . . . . . . . . . . . . . 44 Memory capacity .
Introduction 4 Thank you fo r purchasing a Panas onic cordless telephone . We recommend keeping a record of the following information for future re ference. Att ach your purchase receipt here. Y our phone L References in these operati ng instructions to the charger and to the other handset are for KX-TG5832AL users only .
Introduction 5 Accessory information Included acces sories Additional/replaceme nt accessories No. Accessory items Quantity KX-TG5831AL KX-TG5832AL 1 AC adaptor for base unit 1 1 2 Telephone line co r.
Introduction 6 Import ant safety instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury . 1. Read and understand all instructions. 2. Follow all warnings and instru ctions marked on this unit.
Introduction 7 L Do not touch the plug with wet hands. L The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the unit and is easily accessible. Battery T o reduce the risk of fire or inju ry to persons, read and follow these instructions.
Introduction 8 For best perfor mance Base unit location/ noise The base unit and handset use radio waves to communicate with each other . For maximum distance and noise-free operation, we recommend the follo wing: L Placing the unit away from electrical appliances such as a TV , personal computer or another cordless phone.
Preparation 9 Connections Base unit Charger (KX-TG5832AL only) Note: L Base unit: Use only th e included Panasonic AC adaptor PQL V1AL. L Charger: Use only the include d Pa nasonic AC adaptor KX-TCA1AL. L The AC adaptor must rema in connected at all times.
Preparation 10 If you subscribe to an ADSL service L Please attach a noise filter (contact your ADSL provider) to the telephone lin e between the base unit and the telephone line jack in the event of the fo llowing: – Noise is heard during conversations.
Preparation 11 Battery charge Place the handset on the base unit or charger for 6 hours before initia l use. L The unit will beep once, the CHARGE indicator will lig ht, and “ Charging ” will be displayed. L “ Charge completed ” is displayed when the battery h as been fully charged.
Preparation 12 Battery performance After your Panasonic battery is fully charged, you can expect approxi mately the following performan ce: *1 Handset is off the base unit or charger but not in use. Note: L Battery power is consumed whenever the handset is off the base unit or charger , even when the handset is not in use.
Preparation 13 Controls and displays Controls Base unit A { LOCA TOR/INTERCOM 1 } B { LOCA TOR/INTERCOM 2 } C { LOCA TOR/INTERCOM } D CHARGE indicator E Antenna F Speaker G Display H { ANSWER ON } ANSWER ON indicator I { GREETING REC } (Recording) J { GREETING CHECK } K { ERASE } L Charge co nt act s M MIC (Microphone ) N VOL.
Preparation 14 Handset A Speaker B Soft key C Headset jack D {C} (T ALK) E Navigator key F {s} (SP-PHONE) G { P AUSE } { REDIAL } H Ringer indicator Message indicator I Receiver J Display K { MENU } L.
Preparation 15 Display Base unit display items *1 KX-TG5832AL only Handset displa y items Soft keys The handset features 2 soft keys. By pressing a soft key , you can select the function displayed directly above it. L The functions displayed will vary depending on how you are us ing the unit.
Preparation 16 Setting the date and time Set the date and time so that the unit will announce the day a nd time each message was recorded by the answering system (page 41) when you play back messages. 1 Press { MENU } . 2 Scroll to “ Date and time ” by pressing {V} or {^} , then press { > } or { Select } .
Making/Answering Calls 17 Making calls 1 Lift the handset and press {C} . L “ Talk ” will be displayed. 2 Dial the phone n umber. 3 When finished talking, press { OFF } or place the handset on the base unit or charger. Note: L “ Line in use ” is displayed when someone is talking on the other handset (KX-TG5832AL only) or an other phone.
Making/Answering Calls 18 T o make a ca ll using the redial list The last 5 phone numbers dialled are stored in the redial li st. 1 Press { REDIAL } . L The last number d ialled will be displayed. 2 Press {V} or {^} repeatedly to display the desired number.
Making/Answering Calls 19 Useful features during a call HOLD button This feature allows you to put an outside call on hold. KX-TG5831AL: Press { HOLD } during an outside call. L “ Hold ” will be displayed. L T o return to the call, press {C} or {s} .
Making/Answering Calls 20 Clarity booster This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature will be turned on automatically when necessary . This feature will turn off when you hang up or put a call on hold.
Phonebook 21 Using the phonebook The handset phonebook all ows you to make calls without havin g to dial manually . Y ou can add 50 names and phone numbers to the handset phone book and search for phonebook en tries by name. Adding items to the phonebook 1 Press { Phonebook } .
Phonebook 22 T o edit/corr ect a mist ake Press { < } or { > } to move the cursor to the character or number you wish to erase, then press { CLEAR } . Enter the appropriate characte r or number . Note: L Press and hold { CLEAR } to erase a ll characters or numbers.
Phonebook 23 Chain dial feature This feat ure allows you to dial phone numbers from the phonebook while you are on a call. Example: Using a long distance calling card 1 Dial from the phonebook: 18000123456 (Calling card access number). 2 When prompted, dial from the phonebook: 1234 (Calling card PIN).
Phonebook 24 Copying all items 1 Press { MENU } . 2 Scroll to “ Copy phonebook ” by pressing {V} or {^} , then press { > } . 3 Scroll to “ Copy all items ” by pressing {V} or {^} , then press { > } . L When all items h ave been copied, “ Complete ” will be displayed.
Caller ID Service 25 Using Caller ID service This unit is Caller ID compatible. T o use Caller ID features, you must subscribe to your telephone company’s Caller ID service. Caller I D features When an outside call is being receive d, the calling party’ s phone numb er will be displayed.
Caller ID Service 26 ringer tone you set on page 34 when a ca ll is received from that caller . The default setting is “ No Ringer ID ”. 1 Press { Phonebook } , then press { Search } . 2 Press {V} or {^} repeatedly to display the desired item. 3 Press { Option } .
Caller ID Service 27 L If the caller ’s name and phone number are stored in the phoneboo k, the caller ’s name and phone n umber are displayed alternately . L If an arrow ( → ) is displayed after the number , the whole phone number will not be shown.
Caller ID Service 28 L T o con tinue storing other items, repeat from step 2. 6 Press { OFF } . Note: L If the caller informa tion does not include a phone number , you cannot sto re it in the phonebook. Erasing caller information Erasing a selected item 1 Press {V} or {^} to enter the caller list.
Intercom Feature s 29 Intercom Intercom calls can be made betwe en a handset and the base un it (and between 2 handsets, KX-TG5832AL only). Note: L If you have difficulty hearing the other party while using the speaker , decrease the speaker volume . L If you receive a phone call while talking on the intercom, you will hear 2 tones (page 34).
Intercom Feature s 30 For KX-TG5832AL users Call the desired unit by selecting th e extension number , shown in the upper right of each handset’s display . The base unit’s extension number is 0. L T o confi rm the handset’s extension number ( [1] or [2] ), place the ha ndset on the base unit or charger .
Intercom Feature s 31 T ransferring a call (KX- TG5832AL only) Outside calls can be transferred from one handset to the other . 1 During an outsi de call, press { INTERCOM } . L The call will be put on hold. 2 To page the other handset, press { handset [1] } or { handset[2] } .
Programmable Settings 32 Guide to handset programming For your reference, a chart of all progra mmable functions is printed below. Det ails for each item can be found on the corresponding pages.
Programmable Settings 33 L T o go back to the previou s menu, press { < } or { Back } , or press { > } or { Select } while “ (Go back) ” is displayed. Ringer settings Handset ringer volume 4 levels (high/medium/low/off) are available. The default setting is HIGH.
Programmable Settings 34 Handset ringer tone Y ou can change the ringer tone heard when an outside call is received. There are 3 tones and 4 melodies. The default setting is “ Tone 1 ”. 1 Press { MENU } . 2 Scroll to “ Ringer setting ” by pressing {V} or {^} , then press { > } .
Programmable Settings 35 Call options Auto t alk When this fe ature is turned on , you can answer a call by l ifting the handset off the base unit or charger without pressing {C} . The default setting is OFF . 1 Press { MENU } . 2 Scroll to “ Initial setting ” by pressing {V} or {^} , then press { > } .
Programmable Settings 36 T elephone settings Recall time The recall time depends o n your telephone exchange or host PBX. Y ou can select: “ 90ms ” (milliseconds), “ 100ms ” (default), “ 110ms ”, “ 250ms ”, “ 300ms ”, “ 400ms ”, “ 600ms ”, or “ 70 0ms ”.
Programmable Settings 37 Other options Dial lock This feature prohibits making outside calls. The default setting is OFF . Important: L When dial lock is turned on, only phone numbers stored in the phonebook as emer gency numbers (numbers stored with a # at the beginning o f the name) ca n be dialled using the phoneboo k (p age 21).
Programmable Settings 38 L Have the handset and base unit near each other when re-regi stering the handset. L KX-TG5832AL only: Confirm the extension nu mber of the handset which has lost the communication by pl acing the handset on the base unit or charger .
Programmable Settings 39 Programming via direct commands Y ou can also programme most features using “direct command s”—special codes that take you directly to the feature you wish to programme and allow you to select the desired setting. There is no n eed to scroll th rough the unit’s menus.
Programmable Settings 40 *1 KX-TG5832AL only Note: L If you make a mistake or enter the wrong code, press { OFF } then start again b y pressing { MENU } . Recording tim e { 0 } { 6 } { 2 }{ 1 } : 1 minute { 2 } : 2 minutes { 3 } : 3 minutes { 0 } : Greeting only page 49 Remote code { 0 } { 6 } { 3 } Go to step 5 on page 47.
Answering System Features 41 Answering system The unit contains an answering system which can answer and record calls for you when you are unava ilable to answer the phone. For details about memory capacity , see page 45. Important: L Only 1 person can access the answerin g system (listen to messages, record a greeting message , etc.
Answering System Features 42 T o play ba ck the greeting message Press { GREETING CHECK } . Erasing your greeting message Press { GREETING CHECK } , and then press { ERASE } while your greeting message is playing. L If you do not re-record your greeting message, the unit will use a pre- recorded greeting message.
Answering System Features 43 Listening to messages When new messages have been recorded: – The MESSAGE indicator on the base unit will flash. – The message indi cator on the h andset will flash slowly if the message alert feature is turn ed on (page 49).
Answering System Features 44 Note: L Caller informa tion for the erased messages will remain in the caller list. Listening to messages using the handset When new messages have been recorded, “ New message ” is displayed . 1 Press { MENU } . 2 Press { Select } at “ Message play ”.
Answering System Features 45 Calling back (Caller ID subscribe rs only) If Caller ID information was received for the call, you can call the caller back while listening to a messag e. Press { Call } during playback. Note: L T o e dit the number before calling back, press { Edit } and edit the number (page 27).
Answering System Features 46 Remote operation Using a touch tone phon e, you can call your phone number from outside and access the unit to listen to messages. The unit’s voice guidance will prompt you to press certain dial keys to perform different operations.
Answering System Features 47 *1 If pushed within the first 5 secon ds of a message, the previous message will be played . *2 T o re sume operation, enter a re mote command within 15 seconds, or the voice guidance will start. T urning on the answering system remotely If the answering system is off, you can turn it on remote ly .
Answering System Features 48 Ring count Y ou can change the number of times the phone rings before the uni t answers calls. Y ou can select “ 2 ”, “ 3 ”, “ 4 ” (default), “ 5 ”, “ 6 ”, “ 7 ”, or “ Toll saver ”.
Answering System Features 49 Caller ’ s recording time Y ou can change the maximum message recording time allotted to each caller . “ 1min ”, “ 2min ”, or “ 3min ” (default): Caller messages are limited to 1 minute to 3 minutes. “ Greeting only ”: The unit plays the greeting message but doe s not record caller messages.
Useful Information 50 W all mounting Base unit The base unit can be mounted on a wall. 1 Connect the AC adaptor. 2 Tuck the telephone line cord in side the wall mounting adaptor ( 1 ). Connect the telephone line cord ( 2 ). 3 Insert the hooks on the wall m ountin g adaptor into the holes ( A ) and ( B ) o n the base unit.
Useful Information 51 4 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. 5 Drive the screws (not included) into the w all using the wall mount template (see below). Connect the telephone line cord.
Useful Information 52 T o remove the wall mo unting adaptor While pushing down the re lease levers ( 1 ), remove the adaptor ( 2 ). 2 TG5831_5832AL.book Pag e 52 Monday, March 14, 2005 4:28 PM.
Useful Information 53 Charger (KX-TG5832AL only) The charger can be wall mounted, as shown below . 1 Connect the AC adaptor. 2 Drive the screws (not included) into the wall using the wall mount template (see below). 3 Mount the charger ( 1 ). 4 Slide it down ( 2 ) and to the right ( 3 ) until it is secure.
Useful Information 54 Belt clip Y ou can hang the handset on your belt or pocket using the included belt clip. T o atta ch the belt clip T o remove the belt clip While pressing the top of the clip ( 1 ), pull the right edge in the direction of the arrow ( 2 ).
Useful Information 55 Error messages If the unit detects a problem, one of the following messages will be displayed on the handset. *1 KX-TG5832AL only Display message Cause & solution Busy L The called handset is in use. *1 L The handset you tried to copy phonebook items to is in use.
Useful Information 56 T roubleshooting General use Programmable settings Problem Cause & solution The unit does not work. L Make sure that the battery is installed correctly (page 10). L Check the connections (page 9). L Fully charge the battery (page 1 1).
Useful Information 57 Making/answering calls, Intercom Problem Cause & solution Static is heard, sound cuts in and out. Interference from other electrical units. L Move the handset and the ba se unit away from other electrical appliances. L Move closer to the base unit.
Useful Information 58 Phonebook Caller ID Problem Cause & solution I cannot store an item in the phonebook. L Y ou cannot store an item in th e phonebook while the handset is in talk, speakerphone or intercom mode, or while listening to messages. L Do not p ause for over 1 minute wh ile storing.
Useful Information 59 Answering system Battery charge Problem Cause & solution I cannot listen to messages from a remote location. L A touch tone phone is required for remote operation. L Press the remote code corre ctly and press each key firmly (page 46).
Useful Information 60 Power failure I charged the battery fully, but “ Recharge battery ” is still displayed and/or 7 continues to flash, or “ Charge for 6h ” and 8 are displaye d. L Clean the charge co ntacts and charge again (page 1 1). L The battery may need to be replaced (page 12).
Useful Information 61 Instructions to customer Installation Attached to this apparatus is an approval label. This label is evidence that it is a “Permitted Attachment” which has been auth orised to be connected to your telephone service.
Useful Information 62 If you are satisfied with the operation of your tel ephone service after plugging in your Permitted Attachment, your installation is completed.
Useful Information 63 T echnical information Base unit Operating environ ment: 5 °C – 40 °C Frequency: 5.76 GHz – 5.84 GHz Dimensions: Approx. height 95 mm x width 174 mm x depth 143 mm Mass (Weight): Approx. 320 g Power consumpt ion: S tandby: Approx.
Index 64 Index A Accessories: 5 Answering calls: 18 Answering system: 41 Area code: 36 Auto talk: 18 , 35 B Backlit display: 15 Backlit handset keypad: 15 Base unit location: 8 Battery Charge: 11 Inst.
Index 65 Ring count: 48 Ringer T one: 34 Vo l u m e : 33 Ringer ID: 25 Ringer off: 18 , 33 S Safety instructions: 6 Soft keys: 15 SP-phone: 17 T T echnical information: 63 T ime adjustment: 38 T oll s.
TG5831_5832AL.book Pag e 66 Monday, March 14, 2005 4:28 PM.
TG5831_5832AL.book Pag e 67 Monday, March 14, 2005 4:28 PM.
Copyright: This material is copyrigh ted by Panasonic Commu nications Co., Ltd., and may be reproduced for internal u se only . All o ther reproduction, in whole or in part, is prohibited without the written cons ent of Panasonic C ommunications Co., Ltd.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Panasonic KX-TG5832AL è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Panasonic KX-TG5832AL - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Panasonic KX-TG5832AL imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Panasonic KX-TG5832AL ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Panasonic KX-TG5832AL, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Panasonic KX-TG5832AL.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Panasonic KX-TG5832AL. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Panasonic KX-TG5832AL insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
