Manuale d’uso / di manutenzione del prodotto KX- TG2583B del fabbricante Panasonic
Vai alla pagina of 95
Panasonic World Wide Web address: http://www Panasonic corn for customers in the USA or Puerto Rico.
Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on page 80 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic cordless telephone.
For Best Performance Battery Charge A rechargeable Ni-Cd battery powers the handset Charge the battery for about 6 hours before initial use (p 11) Base Unit Location/Noise Calls are transmitted betwee.
Contents Location of Controls Displays Settings Connections Battery Charge Selecting the Dialing Mode Selecting the Line Mode Programmable Functions Setting the Auto Talk Feature Selecting the Ringer .
Editing an Item in the Directory Erasing an Item from the Directory Intercom Transferring a Call Using the Intercom Special Features Automatic Security Code Setting For Call Waiting Service Users How .
Location of Controls Base unit Antennas (p 3, 10) Button (p 52) IN USEKHARG (REDIAUPALBE) Button Button (p 54, 55) : (HOLD/RINGER] Button (p 18,29) blC (Microphone) (p 19, 28, 31, 52).
[ NEW ME SS A G E ) Button (P 57) CALLER ID indicator (P 31, 33) ANSWER ON Indicator (p 56, 57, 59) ( ANSWER ON ) Button ( P 56) Ii?&@ Button (p 55) (G REETING / EDIT ) Buttoti (P 19,37) (STOP/EXI.
I) Location of Controls Handset Display (p 9, 72) Headset Jack (p 70). . , (DIRECT) Button ( P 41,42) (m] Button (p 26, 31) (INTERCOM/CLEAR] Button (p 39, 45, 51, 52) ’ Navigator Key uxmml,Q) (P 15,.
Displays Handset 2 @fYz2!q aThe display shows the dialed number, call status, programming options and directory items etc If you subscribe to a Caller ID service, caller information will I IIll be dis.
Settings Connections from being disconnected Single-Line Telephone Jack (RJI 1C) Terone Line CordD Q Power Outlet (AC 120 V, 60 Hz) *USE ONLY WITH Panasonic AC ADAPTOR PQLVlO (Order No PQLVl OZ) *The .
Battery Charge Place the handset on the base unit and charge for about 6 hours before initial use *The IN USE/CHARGE indicator lights and a beep sounds IN US lndica Battery strength You can check the .
I) Settings battery information After your Panasonic battery is fully charged (p 11) While in use (TALK) near the base unit* Up to 4 5 hours away from the base unit Up to 3 5 hours While not in use (S.
Selecting the Dialing Mode You can program the dialing mode using the handset near the base unit If you have touch tone service, set to “Tone” If rotary or pulse service is used, set to “Pulse” Your phone comes from the factory set to “Tone” Make sure the unit is in the standby mode initially.
r) Settings Selecting the Line Mode If the line is connected to a low voltage system such as a PBX, set to “B” Otherwise the Call Waiting Caller ID Feature may not be used (p 54) Your phone comes from the factory set to “A” Use the handset near the base unit.
Programmable Functions You can program the following function items using the handset near the base unit The display shows the programming instructions See the corresponding pages for function details Make sure the unit is in the standby mode initially.
e Programmable Functions Setting the Auto Talk Feature The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without pressing (ml If you want to use this feature, turn the feature ON by programming Your phone comes from the factory set to OFF Make sure the unit is in the standby mode initially.
Selecting the Ringer Volume With the handset You can set the handset ringer volume to HIGH, LOW or OFF If set to OFF, the handset will not ring Your phone comes from the factory set to HIGH Make sure the unit is in the standby mode initially.
I) Programmable Functions With the base unit You can set the base unit ringer volume to HIGH, LOW or OFF If set to OFF, the base unit will not ring Your phone comes from the factory set to HIGH Make s.
Preparing the Answering System w Greeting Message You can record a personal greeting message of up to 2 minutes If a greeting message is not recorded, one of two pre-recorded greetings will be slaved .
I) Preparing the Answering System To adjust the speaker volume: 9 levels (O-8) are available while using the answering system To increase, press &J To decrease, press @ Ex Level 8 Greeting message.
Programming Summary for the Answering System You can program the following functions using the handset near the base unit. Make sure the unit is in the standby mode initially.
I) Preparing the Answering System Day and Time Adjustment 1 2 3 4 5 6 7 8 Press (FUN~TI~N/EXITICH] Press @ or &J repeatedly until the arrow points to “ProgramV Press FWD/EDIT @ (Yes key) Press @.
9 Press FWD/EDIT @ (Save key) *The unit announces the day/time The clock starts working *If 6 beeps sound, the setting is not correct Start again from step 5 *To return to the standby mode, press FUNCTION/EXIT/CH *In step 7, you cannot enter numbers greater than 12 Do not use military time.
I) Preparing the Answering System Selecting the Caller’s Recording Time You can select “1 minute”, “3 minutes” or “Greeting only” for the caller’s recording time Your phone comes from .
Selecting the Number of Rings You can select the number of times the unit rings before the answering system answers a call, from “2” to “7” or “Toll saver”* Your phone comes from the facto.
Making Calls With the Handset [TALK) QA3 [FUN~TI~N/EXIT/~H) (INTER~~M/~LEAR] (REDIAUPAUSE) 1 Press [TALK) I=-----1 2 Dial a phone number *The dialed number is displayed *After a few seconds, the display will show the length of the call and the battery strength ‘fl’.
To dial after confirming the entered number 1 Dial a phone number @If you misdial, press INTERCOM/CLEAR and dial again 2 Press (TALK] *After a few seconds, the display will show the length of the call.
e Making Calls With the Base Unit (Digital Duplex Speakerphone) (REDIAUPAUSE) 1 2 3 4 M.IC and Indicator Press (DIGITAL sp-PHONE) *The DIGITAL SP-PHONE indicator lights Dial a phone number When the ot.
Hands-free Digital Duplex Speakerphone For best performance, please note the following *Talk alternately with the caller in a quiet room *If the other party has difficulty hearing you, press @ to decr.
I) Making Calls Simultaneous Keypad Dialing You can use the base unit like a standard telephone After pressing (m] to make a call with the handset near the base unit, you can also dial using the base .
Answering Calls When a call is received, the unit rings, "Incoming call" is displayed and the CALLER ID indicator flashes quickly If you subscribe to a Caller ID service, the calling party i.
Caller ID Service This unit is compatible with a Caller ID service offered by your telephone company If you subscribe to a Caller ID service, the calling party’s information will be shown on the han.
*Caller information cannot be displayed in the following cases -If the caller dialed from an area which does not provide a Caller ID service, the display will show “Out of area" --If the caller.
Using the Caller List Viewing the Caller List You can view the caller list with the handset or the base unit Caller List information includes the caller’s name and phone number, the time and date the call was received, and the number of times that caller called (P 35) Make sure the unit is in the standby mode initially.
What “4” means When the display shows ‘V”, you have already viewed this calling information, answered the call, called back the caller or played back the message (p 57) If the same caller call.
I) Using the Caller List Editing the Caller’s Phone Number You can edit a phone number into one of 4 patterns using the handset or the base unit Make sure the unit is in the standby mode initially.
With the base unit 1 Press Q or @ to enter the Caller List 2 Press Q or Q repeatedly to find the desired caller 3 Press (GREETING/EDIT] to select a pattern *Each time you press GREETING/EDIT , the num.
I) Using the Caller List Storing Caller List Information in the Directory You can store names and phone numbers that are in the Caller List into the directory Storing must be carried out with the handset. Make sure the unit is in the standby mode initially.
Erasing Caller List Information After checking the Caller List, you can erase some or all of the entries with the handset or the base unit Make sure the unit is in the standby mode initially.
II) Using the Caller List To erase all entries in the Caller List Before erasing all entries, make sure that “0 new call" is displayed 3 Press Q or @ to select ‘All clear" 4 Press FWD/ED.
One-Touch Dialer You can store a phone number in the [DIRECT) button of the handset The stored number is dialed with a one-touch operation Storing a Phone Number in the DIRECT Button Make sure the unit is in the standby mode initially.
q One Touch Dialer Dialing the Stored Number in the DIRECT Button 1 Press [DIRECT] *The stored number is displayed 1234567890123456 789012 2 Press (TALK] l The number is dialed *You can also dial the .
Using the Directory You can store up to 50 names and phone numbers in the directory using the handset All directory items are sorted by the first word in alphabetical order Using the directory, you ca.
e Using the Directory 1 Press (FUNCTI~N/EXIT/CH) 2 While the arrow points to “Save directory", press FWDIEDIT @I (Yes key) *The display shows the number of stored items in the directory 3 Enter.
Selecting Characters to Enter Names The handset dialing buttons (@ to @), BACK @I and FWD/EDIT @ can be used to enter letters and symbols The letters are printed on the dialing buttons Pressina each b.
I) Using the Directory For example, to enter “Tom Jones”: 1 2 3 4 5 6 7 8 9 Press (FUNCTIONIEXITI~H) While the arrow points to “save directory", press FWD/EDIT @ (Yes key) Press (SJ Press @.
Finding Items in the Directory You can search the directory using the handset or the base unit Make sure the unit is in the standby mode initially. With the handset 3 Press l?J or &I repeatedly un.
I) Using the Directory With the base unit 1 2 3 Press &I or Q to enter the directory list Ei Press @ or Q *The first item is displayed E Press @I or @ repeatedly until the desired item is displaye.
Index table Dialing from the Directory Make sure the unit is in the standby mode initially. With the handset With the base unit 1 Press BACK @ or FWD/EDIT &J to enter the directory list Directory .
I) Using the Directory Editing an Item in the Directory Programming must be carried out with the handset. Make sure the unit is in the standby mode initially.
Erasing an Item from the Directory You can erase an item using the handset or the base unit Make sure the unit is in the standby mode initially. With the handset 1 Press BACK @ or FWD/EDIT @ to enter .
Intercom A 2-way intercom is possible between the handset and the base unit Paging the base unit from the handset 1 2 3 Handset Press [INTERC~M/CLEARI Talk to the paged party after the beeps *“Inter.
During an intercom call: *Intercom calls can only be ended with the handset *If the handset user has difficulty hearing the base unit user, decrease the base unit speaker volume by pressing @ on the b.
Special Features Automatic Security Code Setting Each time you place the handset on the base unit, the unit automatically selects one of more than a million security codes These codes help prevent the.
Temporary Tone Dialing (For Rotary or Pulse Service Users) Press (TONE) before entering access numbers which require tone dialing *The dialing mode changes to tone You can enter numbers to access an a.
Automatic Answering Operation When the unit answers a call, a greeting message is played and the caller’s message is recorded While recording, “- Answering -" will flash on the base unit disp.
Listening to Messages You can see the total number of recorded messages on the base unit display If the ANSWER ON indicator flashes, new messages have been recorded Listening to only new messages Pres.
r) Listening to Messages For Caller ID service users (p 32) During playback, the base unit display will show the name and/or number of the caller whose message is being played To call back the display.
Erasing Messages The unit will announce the remaining recording time after playback, if it is less than 5 minutes New messages cannot be recorded when -“Memory full” is heard -“Message full” f.
Remote Operation from a Touch Tone Phone You can operate the answering system from any touch tone phone A synthesized voice menu will guide you on how to operate the unit *To skip the voice menu and o.
Setting the Remote Code The remote code prevents unauthorized people from accessing your unit and listening to your messages Choose any 24git number (00-99) The factory preset remote code is “11” If you do not program your own remote code, you can use “11” Use the handset near the base unit.
I) Remote Operation from a Touch Tone Phone Voice Menu The shaded boxes are voice prompts Press 1 to play back all messages *[*-s[Fjm t Press Q [J Press 1 to play back new messages $ Press Q Press CiJ.
/ All Message Playback All recorded messages are played back At the end of the last message, “End of final message” is heard The unit will announce the remaining recording time if it is less than .
* Remote Operation from a Touch Tone Phone Direct Remote Operation Once you have entered the remote code, you can also control your unit by direct commands instead of using the voice menu To end the r.
ANSWERING SYSTEM OFF @I *The unit hangs up and will not answer calls until turned on again Turning on the answering system Call your unit and wait for 15 rings *The unit will answer and the greeting m.
Remote Operation with the Handset You can operate your answering system with the handset The announcements and recorded messages can only be heard with the handset (FLASH/CALL WAIT / PLAYBACK ] Summar.
Direct commands NEW MESSAGE 0 4 *Only new messages are played back PLAY BACK ALL MESSAGE PLAY BACK 0 5 *All messages are played back REPEAT 0 1 *The current message is repeated (During playback) *You .
Wall Mounting This unit can be mounted on a wall phone plate 1 Adjust the angle of the cradle I @Slide the lock switch to “RELEASE” @Rotate the cradle 90” until it faces straight @%de the lock s.
4 Connect the telephone line cord Mount the unit, then slide down *Raise the antennas 5 To charge the handset battery: Place the handset in the cradle as shown *The IN USE/CHARGE indicator lights IN U.
Using the Belt Clip You can hang the handset on your belt or pocket using the belt clip To attach the belt clip To remove the belt clip Using an Optional Headset Plugging an optional headset into the .
Battery Replacement If "Recharge battery" is displayed and/or “ 1 I 1” flashes after being fully charged, replace the battery with a new Panasonic P-P510 (N4HKGMBOOOOl) battery To order,.
If the Following Appear... If the unit detects a problem, one of the following messages will be displayed on the handset or the base unit Handset display Not available The battery needs to be charged .
Base unit display When the clock needs adjusting, the day and time flashes with “a” Adjust the clock (p 22) Your greeting message was not recorded correctly Record it again (p 19) If message memor.
Before Requesting Help Cordless Telephone Problem Remedv "No link to base. *You are too far from the base unit Move Place on cradle and closer and try again try again.
Problem Remedy The unit does not display the *YOU need to subscribe to a Caller ID caller’s name and/or phone service from a telephone company number *Other telephone equipment may be interfering wi.
I) Before Requesting Help Problem Remedy You cannot have a conversation using the handset *When the headset is connected (p 70), you must use the headset to talk with the caller To have a normal cordl.
Problem Remedy You cannot operate the answering system with the handset *Someone is operating the answering system *You are too far from the base unit Move closer to the base unit *The unit is recordi.
I) Before Requesting Help General Problem Remedy The unit does not work *Check the settings (p 10-14) *Charge the battery fully (p 11) *Clean the charge contacts and charge again (p 12) *Install the b.
Problem Remedy The IN USE/CHARGE indicator light does not go out while charging *This is normal If you cannot solve your problem *Call our customer call center at l-800-21 1 -PANA(7262) *Panasonic’s.
Important Safety Instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury 7 8 9 10 11 12 13 14 80 Read and u.
CAUTION: To reduce the risk of fire or injury to persons, read and follow these instructions 1 Use only the battery(ies) specified 2 Do not dispose of the battery(ies) in a fire They may explode Check.
FCC and Other Information If requested by the telephone company, inform them as follows FCC Registration No (found on the bottom of the unit) Ringer Equivalence OIB The particular telephone line to wh.
CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device Note: This equipment has been tested and f.
For product service *Panasonic Servicenters are listed in the servicenter directory *Call l-800-21 1 -PANA(7262) for the location of an authorized servicenter aPanasonic’s e-mail address for custome.
one 0 Wall Mounting Adaptor How to Set Up the Unit 1 Connect as shown. The AC Adaptor must remain connected 2 For maximum distance and noise-free operation, place the base unit in a HIGH and CENTRAL location with no obstructions or interference from electrical appliances Charge the battery for about 6 hours before initial use.
How to Operate the Unit Raise the base unit antennas for best reception. Display (FUNCTI~N/E~~TICH) (FUNCTI~N/E~~TICH) [INTERCOM/CLEAR) ANSWER ON ANSWER ON lndicato lndicato IN USE/CHARGE lndicat IN U.
With thghandset 7 Press ITALKJ. 2 Dial a phone number 3 To hang up, press (m] or place the handset on the base unit. *To dial after confirming the entered number, enter a phone number and press I=]. *If noise Interferes with the conversation, press FUNCTIONIEXITICH to select a clearer channel or move closer to the base unit.
Using the Directory You can store up to 50 names and phone numbers In the directory All directory items are sorted by the first word In alphabetical order Using the directory, you can make a call by selecting a name on the handset or base unit display To store names and phone numbers in the directory Use the handset near the base unit.
With the base unit 7 Press @I or @ to enter the directory list. 2 Press Q or Q. 3 Press @ or &I repeatedly to find the desired item. *To search for a name by Initial: Press the dialing button for the first letter of the desired name until any name with the same initial IS displayed.
You can check who has called as follows. Ex. When you search from the most recent call: With the handset 1 Press FJ or Q. 2 Press #J repeatedly to find the desired caller elf there IS no name rnformation for a caller, the display will only show the phone number.
You can program the followrng functions using the handset near the base unit. The base unit display shows programmrng options or settings. Make sure the unit IS In the standby mode initially @ Setting.
Recording a Greeting Message You can record a personal greeting message of up to 2 minutes. All messages (greeting, Incoming, etc.) are stored In digital memory The total recording time IS about 15 minutes. Press and hold (GREETING/EDIT) until a beep IS heard.
Caution-To comply with FCC RF exposure requirements, the base unit should be rnstalled with its antenna located at 20 cm or more from persons and handset should be carned with the specific belt-clip provided for the handset to ensure compliance.
3AB3311 IINH AlldUUOld IlNOdSIll LOOZ-LUU-008-L 3N1710H NV7d 3WD kWVOlSn3 33M-7701 ElflO JO 33N3IN3AN03 3H13Sn ipa.l!dXa SBLj h&ll?JJEM /(JO&3lZ~ ayj .
THE CUSTOMER CARE PLAN OFFERS ALL OF THESE OUTSTANDING BENEFITS: q Labor to complete repairs 0 Replacement parts o Electronic or mechanical adjustments q Specified internal cleaning q Requested preven.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Panasonic KX- TG2583B è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Panasonic KX- TG2583B - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Panasonic KX- TG2583B imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Panasonic KX- TG2583B ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Panasonic KX- TG2583B, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Panasonic KX- TG2583B.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Panasonic KX- TG2583B. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Panasonic KX- TG2583B insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
