Manuale d’uso / di manutenzione del prodotto VCR9600 del fabbricante Palsonic
Vai alla pagina of 23
VCR-9600 OWNER’S MANUAL VIDEO CASSETTE RECORDER Type Tested Electrical Safety AS/NZS 3250 Lic 4168 Standards Australia.
How to Use This Manual Please read this Owner ’s Manual carefully before using the VCR and store it in a safe place for future reference. This Owner ’s Manual explains how to use your VCR and, in particular , using the remote control unit keys to control the VCR.
Remote control unit.
Front Panel REMOTE SENSOR Multi-display REC.button (REC/OTR) CHANNEL V/ buttons STOP/EJECT button FF button PLAY button REW button Cassette loading slot OPERATE/TIMER button Rear Panel AC Mains cord CLEAR button TEST SIGNAL switch AUDIO OUT Jack AUDIO IN Jack RF OUT socket CH ADJ (RF CHANNEL ADJUSTER) ANT.
NOTICE: Unauthorized recording of copyrighted television programmes, films, video tapes and other materi- als may infringe on the rights of copyright owners and be contrary to copyright laws. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
INTRODUCTION........................................... E-4 RemoteControl Operation....................... E-4 Video Cassette Tape............................... E-4 INSTALLATION............................................. E-5 Equipment Connection...
. Remote Control Operation This VCR can be operated with the remote control from up to a distance of about 23 feet (7 meters) and within an angle of 15 degrees either side of center. There must be no obstacles between the remote control unit and the remote sensor of the VCR.
Equipment Connection TV Antenna T o watch a picture from the VCR using this connection, it is necessary to set one of the TV channels as the "Video channel". See Preparations in V ideo Channel Setting (on Page 6). 1. Connect the antenna (or CATV) connector to the ANT.
Language Clock AMS Video Channel Setting Initial Settings This setting is necessary for RF connections (when the SCART cable is not used to connect this unit and the TV). This setting is not necessary for AV connections using the SCART cable. Start from the initial Settings in the next section.
1. Set the On-screen Language 1. 2. 1. 2. 3. Initial Setting Up Select the language you want by using the buttons to display it inverted. When you press the MENU button, that language is set and the CLOCK SET screen appears automatically. Changing the Language after the Initial Settings Press the MENU buttonand call up the menu screen.
Menu Screen/Mode Screen Using the Menu Screen When you press the MENU button, the menu screen is called up. When you press the MENU button again, the unit returns to the normal screen. Select the item you want by using the buttons to highlight its screen setting, then press the SHIFT> button to move to the selected screen.
CHANNEL PRESET There are two ways to preset channels: Automatic tuning with AMS and manual tuning. AMS Operation Automatic tuning with AMS is executed during the initial settings, so normally it is not necessary. AMS is neces- sary at such times as when you take the unit to another region.
Tuning with the Buttons 1. 2. Press the OPERATE/TIMER button to turn on the VCR. Press the buttons to select the position number to which the desired channel has been preset.
Basic Operation 1. 2. 3. 4. Press the OPERATE/TIMER button. Insert a cassette tape into the CASSETTE LOADING SLOT. Turn on the TV and select the channel for video viewing. Press the PLAY button to start playback. To stop playback: Press the STOP/EJECT button.
Search The Picture Search function is a convenient way to locate a desired portion of the tape quickly . Forward Search: To view high-speed pictures in the forward direction 1. In the Playback mode, press the FF button. 2. Press the FF button again to search faster.
1 Minute Skip With this feature you can skip over one minute’s worth of commercials recorded on a tape. Pressing the SKIP/ZERO RTN button in Play mode to forward search the tape for 60 seconds, then returns the VCR to Play mode.
Basic Operation Auto Turn on System 1. 2. 3. 4. 5. Press the OPERATE/TIMER button. Press the buttons to select a desired channel to be recorded. Insert a cassette tape with a safety tab. Press the REC button to start recording. To finish recording, press the STOP/EJECTbutton.
One-touch Timer Recording (OTR) This allows you record for up to 5 hours with automatic turn-off. 1. 2. Press the REC button during recording. The VCR enters OTR mode. Select the recording duration by pressing the REC button repeatedly. The OTR indication appears on the TV screen.
A maximum of 8 events can be programmed within a period of one month including the present day for timer recording. A timer recording can be activated at the same time on the same day every week, on every day or on weekdays, as well as on a particular day.
Hints on Programming In Step 4, you can select various "EV" (every week) recording of the same channel at the same time modes as well as recording on a particular day. Press the V button when the current day on the calendar blinks or press the button, exceeding the last day of the calendar (the day after one month).
Check the following list of problems and remedies before calling service personnel. The problem may be one you can solve yourself. SYMPTOM CAUSE REMEDY No power supply to the VCR. AC Mains Cord is not connected. Connect the AC Mains cord to the AC outlet.
SPECIFICATIONS GENERAL SECTION Power Requirements Power Consumption Dimensions (W x H x D) Weight Operating Temperature Operating Humidity Video Recording System Number of Video Heads Tape Speed Tape .
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Palsonic VCR9600 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Palsonic VCR9600 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Palsonic VCR9600 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Palsonic VCR9600 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Palsonic VCR9600, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Palsonic VCR9600.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Palsonic VCR9600. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Palsonic VCR9600 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
