Manuale d’uso / di manutenzione del prodotto DVD2030 del fabbricante Palsonic
Vai alla pagina of 32
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 DVD2030 USER'S MANUAL Please read this manual before connection and use.
1 Content Introduction Introduction Safety Precautions ....................................................................................................... Important Safety Instructions...............................................................
Safety Precautions THE LIGHTNING FLASH WITH AR- ROWHEAD SYMBOL WITHIN AN EQUI- LATERAL TRIANGLE IS INTENT TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE UNIT'S CABINET THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
3 Important Safety Instructions Introduction (Symbol provided by RETAC) 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference.
4 Important Safety Instructions Introduction 20. SERVICING Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
5 Caution Introduction It is normal for the cover and rear panel become warm after the player has been operating for an extended period of time. Do not move this product during playback. Doing so may cause damage to the pick-up and the disc. Press OPEN/CLOSE on the front panel or remote to open or close the disc tray.
6 16:9 LB 8 Features Introduction The product complies with KODAK Picture CD format and will display KODAK Picture CDs. The "KODAK Picture CD Compatible" logo is a trademark of Eastman Kodak Company and is used with permission. This product incorporates copyright protection technology that is protected by method claims of certain U.
7 Front Panel and Rear Panel Illustration Introduction Front panel Rear panel 2 3 4 5 6 1 2 3 4 5 6 1 Component Video/Progressive Scan Video Output - Connect to a TV equipped with Component Video or Progressive Scan Video inputs. Video Output - Connect to a TV or display device with a Video input.
8 Remote Control Introduction OPEN/CLOSE VOLUME 0-10 NUMBER KEYS CLEAR RETURN NEXT PREV A-B ANGLE SUBTITLE ZOOM FF SLOW ENTER PLAY PBC SETUP DISPLAY TITLE POWER REW N/P REPEAT Note: 1. Please note that reference numbers for the remote are described begin on page 20 of this manual.
9 Connecting to a TV Set Connections Notes: There are three ways of connecting the player's AV output to the TV set: 1. S-Video cable and left/right audio cable [set the (Video Type) to (S-Video)]. 2. Composite video cable and left/right audio cable.
10 Notes: 1. Set the TV to the AV input connected to the DVD player. 2. Set the Amplifier's to the AV input connected to the DVD Player. Connecting to an AV amplifier with 2 Channel Analog Audio .
11 Connecting to an AV Amplifier with Digital Audio Output S-VIDEO VIDEO COAXIAL Pb/Cb Pr/Cr Y L R Notes: 1. Select the Coaxial digital audio output. 2. Set the players audio out to Raw or PCM mode. 3. Set the Amplifier to the AV input connected to the DVD player.
12 Basic Operation Basic Playback Preparation before playing: 1. Connect your DVD player to the TV and amplifier. 2. Turn on the TV. 3. Set the TV to the AV input connected to the DVD player 4. Turn down the volume on your amplifier, and then power it on.
13 Language Setup Advanced Features Modes and Features Setup SETUP Select [Language] in the Setup Menu, and press ENTER to display the [Language] submenu: Select [OSD Menu], and press ENTER or to display [OSD Menu] submenu: In stop mode, press SETUP , and the TV screen will display the Setup Menu as follows: A.
14 Advanced Features Modes and Features Setup Select [Subtitle], and press ENTER or to display the [Subtitle] submenu: A. Press ENTER to confirm. B. Press SETUP to exit the Setup Menu.
Select [TV shape], and press ENTER or to display the [TV shape] submenu: 15 Advanced Features Modes and Features Setup Select [Video], in the Setup Menu, and press ENTER to display the [Video] submenu: A. Press ENTER to confirm. B. Press SETUP to exit the Setup Menu.
Select [Video Output], and press ENTER or to display the [Video Out] submenu: A. Press ENTER to confirm. B. Press SETUP to exit the Setup Menu. Note: The Composite video and S-video output is always available. [S-Video] - Select if you connected the DVD player to your TV using the composite Video output.
The Rating menu allows you to block playback of DVDs based on their ratings. Setting the Password & Rating Level The DVD player allows you to block playback of inappropriate content with a password protected Rating system (not all discs are rated).
18 Advanced Features Remote Control Operation During playback, press POWER to stop the player and return to standby mode. While the player is in standby, press POWER or any key on the front panel to resume normal operation. CLEAR Press CLEAR to delete numbers you have selected.
19 Advanced Features Remote Control Operation DISPLAY Press DISPLAY again to display additional information about the playing disc. During playback, press DISPLAY to display the current time counter position. DVD 00:00:01 0:04:45 CD VCD CDDA Track 1/15 00:00:01 0:04:45 Elapsed time of the current track/chapter.
20 Advanced Features Remote Control Operation SEARCH Use the number keys to input the desired Time, Title or Chapter, then press ENTER to confirm. Press SEARCH again, the [Disc Search] menu will be displayed as follows: Time searches for an exact time in the movie.
21 Advanced Features Remote Control Operation STOP Press STOP once during playback to stop and hold playback. Press PLAY to resume playback from the point you pressed STOP Press STOP twice to stop playback completely. Note: The screen saver will automatically turn on if playback is stopped for about 5 minutes (when Screen Saver is set as on).
22 Advanced Features Remote Control Operation A-B TITLE During DVD playback, press TITLE key to display the DVD title menu or play the first title. Note: This function is subject to the discs. Press PLAY from stop mode to start playback This function is not available if the elapsed time of current track is less than 10 seconds.
23 Advanced Features Remote Control Operation Please use the [PORG]mode under the state of stopping. While [PROG] is on, press ENTER to display the [Program] submenu: Input the track numbers in the order you would like them to play. When finished, select [Play Program] and then press ENTER to play tracks in the new programmed order.
24 Advanced Features Remote Control Operation REPEAT N/P Press N/P when in STOP mode to select the mode from NTSC/PAL/AUTO. Press SLOW repeatedly to SLOW DOWN motion playback at variable speeds. Select to press REPEAT to select Repeat Title, Repeat chapter, Repeat off during DVD playback.
25 Advanced Features Remote Control Operation MUTE Press MUTE to mute the Audio output. Press MUTE again to resume normal audio output. Press RETURN to the main menu when PBC is on. RETURN VOL+ VOL- Press Volume <VOL+> button to increase Volume.
26 Advanced Features Remote Control Operation During DVD playback Press SUBTITLE repeatedly to select from up to 32 subtitle languages. Note: This function is disc specific (languages will vary). SUBTITLE During DVD playback Press ANGLE to view scenes from different camera angles.
27 Advanced Features MP3 Playback Press to select the file when the cursor appears in the file window Press ENTER to play the current file selected by the cursor. Press to switch between the directory window and the file window. Note: During MP3 playback, Forward Scan and Reverse Scan are not available.
28 Kodak Picture CD Playback Advanced Features The introduction of KODAK PICTURE CD A Kodak Picture CD has the size and shape of a regular CD. You can order a KODAK Picture CD simply by checking the b.
29 2 Remote Control Preparation Other 1. Open the cover. 2. Insert batteries. Make sure to match the "+" and "-" of the batteries with the marks inside the battery compartment. 3. Close the cover. Point the remote control at the remote sensor.
30 REMOTE NOT WORKING Ensure the remote batteries are working. Point the remote control directly at the player's IR sensor. Remove any obstacles between the remote and the IR sensor. UNIT NOT WORKING Turn off the power, and then turn on again Ensure the disc is not warped, damaged or deformed.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Palsonic DVD2030 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Palsonic DVD2030 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Palsonic DVD2030 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Palsonic DVD2030 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Palsonic DVD2030, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Palsonic DVD2030.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Palsonic DVD2030. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Palsonic DVD2030 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
