Manuale d’uso / di manutenzione del prodotto VG-180 del fabbricante Olympus
Vai alla pagina of 65
DIGIT AL CAMERA Instruction Manual V G-165/D-765 V G-180/D-770 ● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life.
2 EN Checking the contents of the bo x Names of Par ts Names of Par ts 1 2 5 4 3 6 7 8 1 Connector cover 2 USB connector 3 Flash 4 Self-timer lamp 5 Lens 6 Microphone 7 Tripod socket 8 Battery/card co.
3 EN 3 2 5 7 1 4 9 6 8 1 n button 2 Shutter button 3 Monitor 4 Zoom buttons 5 Indicator lamp 6 q button (switching between shooting and playback) 7 Arrow pad INFO (changing information display) # ( .
4 EN Inser ting and removing the batter y and card (commer cially available) 1 Follow Steps 1 and 2 to open the battery/card cover . 2 1 1 Battery/card cover T urn off the camera before opening the battery/ card cover . 2 Insert the battery while sliding the battery lock knob in the direction of the arrow .
5 EN 4 Follow Steps 1 and 2 to close the battery/card cover . 1 1 2 When using the camera, be sure to close the battery/card cover . Char ging the batter y Connect the USB cable and USB-AC adapter to the camera and charge the battery . For charging the battery abroad, see “Using your charger and USB-AC adapter abroad” (p.
6 EN When to charge the batteries When to charge the batteries Charge the battery when the error message shown below appears. Battery Empty Error message Flashes in red Never use any cable other than supplied or Olympus-designated USB cable. This may cause smoking or burning.
7 EN Tur ning on the camera and making the initial settings When you turn on the camera for the fi rst time, a screen appears enabling to set the language for the menus and messages displayed in the monitor , and the date and time. T o change the selected date and time, see “Setting the date and time d [ X ]” (p.
8 EN Lear ning how to use the camera ● Press the n button to turn on the camera and enter the standby mode. (Press the n button again to turn off the camera.) ● Select the shooting mode, and press the shutter button to shoot a still image. ● T o shoot a movie, select the n mode, and then press the shutter button.
9 EN 4 Press the shutter button halfway down to focus. Press halfway P P F2.8 F2.8 1/400 1/400 Shutter speed AF target mark Aperture value ● The camera was unable to focus if the AF target mark fl ashes red. Try focusing again. 5 T o take the picture, gently press the shutter button all the way down while being careful not to shake the camera.
10 EN Using the zoom Pressing the zoom buttons adjusts the shooting range. Pressing the wide (W) button Pressing the telephoto (T) button Image size Zoom bar 16M *1 /14M *2 Optical zoom Other *3 *1 VG-180/D-770 only *2 VG-165/D-765 only *3 Due to increased processing of the pixel counts, the image quality will not degrade.
11 EN Using the self-timer After the shutter button is pressed all the way down, the picture is taken after a short delay . 1 Press G . P P 12 12 2 2 Y Off MENU MENU 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 16 M :3 4 2 Use HI to select the setting option, and press the Q button to set.
12 EN Shooting screen displays F2.8 F2.8 1/100 1/100 z z 0:00:34 0:00:34 4 4 N ORM Date 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 16 M P P :3 4 1 2 3 4 5 6 7 8 9 13 15 16 17 14 10 12 18 19 20 21 22 23 11 When the shutter button is pressed halfway down No.
13 EN The default settings of the function are highlighted in . Shooting mode Submode P ( P mode) – M ( M mode) – N (DIS Mode) – Q ( Q mode) Recommended/Set 1/Set 2/ Set 3 a (Super Macro mode) .
14 EN Lear ning about the shooting modes P ( P mode) The camera will select the appropriate aperture value and shutter speed for the subject. Changes can also be made to various shooting settings, such as exposure compensation, as needed. M ( M mode) The camera will automatically select the optimal shooting mode for the scene.
15 EN V iewing images 1 Press the q button. Number of frames/ T otal number of images 12:30 ’13/02/26 ’13/02/26 12: 30 4/30 4/30 Playback image 2 Use HI to select an image. Displays previous image Displays next image ● Hold I to fast forward and hold H to reverse.
16 EN Playback mode display ● Normal No. Name Normal Detailed No info. 1 Battery check – R – 2 Protect RR – 3 Print reservation/ number of prints RR – 4 Current memory RR – 5 Frame number/.
17 EN Er asing images during playback 1 Display the image you want to erase and press G ( ). MENU Erase Back Erase Cancel 4/30 4/30 100-0004 100-0004 2 Press FG to select [Erase], and press the A button. ● Grouped images are erased as a group. ● Multiple images or all images can be erased at a time (p.
18 EN Playing back mo vies Select a movie, and press the A button. 00:1 2/ 00:34 00:12/ 00:34 During playback Movie 4/30 4/30 OK Movie Play Movie Play ’13/02/26 12:30 ’13/02/26 12 :30 Pausing and restarting playback Press the A button to pause playback.
19 EN Operations while playback is paused Operations while playback is paused During pause 0:1 2/ 0:34 0:12/ 0:34 Elapsed time/ T otal shooting time Cueing Use F to display the fi rst frame and press G to display the last frame. Advancing and rewinding one frame at a time Press I or H to advance or rewind one frame at a time.
20 EN Menu settings In certain shooting modes, some functions cannot be set. Program Auto P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO MENU MENU 16 M :3 4 6 7 3 2 1 5 4 Function menu Setup menu (p.
21 EN Flash Sets the fl ash fi ring method. _ Flash Auto The fl ash fi res automatically in low-light or backlight conditions. ! Redeye Pre- fl ashes are emitted to reduce the occurrence of red eye in your photos. # Fill In The fl ash fi res regardless of the available light.
22 EN ISO sensitivity Sets the ISO sensitivity . l ISO Auto The camera automatically sets the sensitivity with priority on image quality . to V alue Set a smaller value to reduce noise in the picture, or a larger value to reduce blur . Image size Sets the number of recording pixels.
23 EN Setup menu Setup menu MENU On Off Camera Menu Date Stamp Reset Reset Compression Icon Guide Normal AF Mode Digital Zoom Face/iESP Off Back 4 2 3 5 1 3 Playback Menu (p. 28) q Slideshow Edit Erase Print Order R (Protect) 1 Camera Menu (p. 25) 4 Settings Menu 1 (p.
24 EN Using the setup menu Press the button during shooting or playback to display the setup menu. The setup menu provides access to a variety of camera settings, such as shooting and playback functions, time and date settings, and display options.
25 EN ● The default settings of the function are highlighted in . ● For the operation method, refer to “Using the setup menu” (p. 24). z Camera Menu Restoring the shooting functions Restor.
26 EN T o focus on a moving subject T o focus on a moving subject continuously (AF T racking) continuously (AF T racking) 1 Hold the camera to align the AF target mark on the subject and press the A button. 2 When the camera recognizes the subject, the AF target mark automatically tracks the subject movement to focus on it continuously .
27 EN Displaying icon guides Displaying icon guides z z [Icon Guide] [Icon Guide] Submenu 2 Application Off No icon guide is displayed. On The explanation of the selected icon will be displayed when a shooting mode or function menu icon is selected (position the cursor on the icon for a while to display the explanation).
28 EN Recording sound when shooting Recording sound when shooting movies movies A A [ [ R R ] ] Submenu 2 Application Off No sound is recorded. On Sound is recorded. ● When set to [On], only the digital zoom can be used during movie recording. T o record the movie with the optical zoom, set [ R ] (movies) to [Off].
29 EN 3 Press the A button after you have selected the area to trim. ● The edited image is saved as a separate image. Brightening areas that are dark Brightening areas that are dark due to backlight.
30 EN Erasing images Erasing images q q [Erase] [Erase] Submenu 2 Application All Erase All images in the internal memory or card will be erased. Sel. Image Images are individually selected and erased. Erase Deletes the image displayed. ● When erasing pictures in the internal memory , do not insert the card into the camera.
31 EN 3 If necessary, repeat Steps 1 and 2 to protect other images, and press the button. d Settings Menu 1 Erasing data completely Erasing data completely d d [Memory Format]/ [Memory Format]/ d d [Format] [Format] ● Before formatting, check that no important data is left in the internal memory or card.
32 EN T urning on the camera with the T urning on the camera with the q q button button d d [ [ q q Power On] Power On] Submenu 2 Application No The camera is not turned on. T o turn on the camera, press the n button. Ye s Press and hold the q button to turn the camera on in the playback mode.
33 EN d Settings Menu 2 Adjusting the brightness of the Adjusting the brightness of the monitor monitor d d [ [ s s ] ] T o adjust the monitor brightness T o adjust the monitor brightness 1 Use FG to adjust the brightness while viewing the screen, and then press the A button.
34 EN Choosing home and alternate time Choosing home and alternate time zones zones d d [World T ime] [World T ime] ● Y ou will not be able to select a time zone using [World T ime] if the camera clock has not fi rst been set using [ X ].
35 EN Connecting with a computer When [USB Connection] is set to [Auto], connect the camera and the computer , select [Storage] or [MTP] at the screen for selecting the connection method, and then press the A button.
36 EN Print Reser vations 3 Use FG to select [ < ], and press the A button. 0 4/30 4/30 Print Order Print OK N OR M 100-0004 ‘13/02/26 12:30 N ORM 100-0004 4608×3456 4608×3456 ‘13/02/26 12:30 4 Use HI to select the image for print reservation.
37 EN Reser ving one print each of all images on the car d [ U ] 1 Follow Steps 1 and 2 in [ < ] (p. 36). 2 Use FG to select [ U ], and press the A button. 3 Follow Steps 5 and 6 in [ < ]. Resetting all print reser vation data 1 Follow Steps 1 and 2 in [ < ] (p.
38 EN Usage Tips If the camera does not work as intended, or if an error message is displayed on the screen, and you are unsure of what to do, refer to the information below to fi x the problem(s). T roubleshooting Battery Battery “The camera does not work even when batteries are installed”.
39 EN Monitor Monitor “Dif fi cult to see”. ● Condensation may have occurred. T urn off the power , and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures. “V ertical lines appear on the monitor”.
40 EN Er r or message ● When one of the messages below is displayed on the monitor , check the corrective action. Error message Corrective action Card Error Card problem Insert a new card. Write Protect Card problem The card write-protect switch is set to the “LOCK” side.
41 EN Shooting tips When you are unsure of how to take a picture that you envision, refer to the information below . Focusing “Focusing on the subject” ● T aking a picture of a subject not in the center of the monitor After focusing on an object at the same distance as the subject, compose the shot, and take the picture.
42 EN Camera shake “T aking pictures without camera shake” ● T aking pictures using N (p. 14) ● Select [ C Sport] in the scene mode (p. 13) The [ C Sport] mode uses a fast shutter speed and can reduce the blur incurred by a moving subject.
43 EN Image quality “T aking sharper pictures” ● T aking pictures with the optical zoom Avoid using digital zoom (p. 26) to take pictures. ● T aking pictures at a low ISO sensitivity If the pi.
44 EN List of settings available in each shooting mode For details on , refer to “List of settings” (p. 45). For details on shaded areas, refer to “List of P settings” (p.
45 EN List of settings BF G M C N W R S Zoom RRRRRRR – R Flash *1 –– *1 *1 *1 – *1 – Self-timer RRRRRRRRR Exposure compensation ––––––––– White balance – – – – .
46 EN XVd q Zoom RRRRR Flash – *1 – *1 – Self-timer RRRRR Exposure compensation ––––– White balance – – – – – ISO sensitivity – – – – – Image Size RRRRR Aspect RRRRR Compression RRRRR AF Mode – RRR – Digital Zoom RRRRR Icon Guide RRRRR Date Stamp RRRRR *1 Some functions cannot be set.
47 EN List of P settings Pop Art Pin Hole Fish Eye Soft Focus Punk Exposure compensation RR – RR White balance RR – R – Image Size RRRRR Sparkle Watercolor Re fl ection Miniature Exposure compensation RRRR White balance RRRR Image Size *1 RRR *1 Some functions cannot be set.
48 EN Appendix Camera car e Exterior • Wipe gently with a soft cloth. If the camera is very dirty , soak the cloth in mild soapy water and wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used the camera at the beach, use a cloth soaked in clean water and wrung well.
49 EN Using the car d Cards compatible with this camera Cards compatible with this camera SD/SDHC/SDXC card (commercially available) (for compatibility card details, visit the Olympus website.) ● This camera can be used without a card by storing images in its internal memory .
50 EN Number of storable pictures (still images)/Recording length (movies) in the internal Number of storable pictures (still images)/Recording length (movies) in the internal memory and cards memory and cards The fi gures for the number of storable still pictures and recording length are approximate.
51 EN Movies Movies Image Size Frame Rate Continuous recording length Internal memory SD/SDHC/SDXC card (4 GB) With sound Without sound With sound Without sound 8 640×480 30fps 8 sec. 8 sec. 33 min. 35 min. 15fps 16 sec. 17 sec. 64 min. 70 min. 9 320×240 30fps 22 sec.
52 EN T rademarks T rademarks • Microsoft and Windows are registered trademarks of Microsoft Corporation. • Macintosh is a trademark of Apple Inc. • SDXC Logo is a trademark of SD-3C, LLC. • All other company and product names are registered trademarks and/or trademarks of their respective owners.
53 EN SPECIFICA TIONS Camera Camera VG-165/D-765 VG-180/D-770 Product type : Digital camera (for shooting and displaying) Recording system Still pictures : Digital recording, JPEG (in accordance with Design rule for Camera File system (DCF)) Applicable standards : Exif 2.
54 EN Operating environment T emperature : 0 °C to 40 °C (32 °F to 104 °F) (operation)/ -20 °C to 60 °C (-4 °F to 140 °F) (storage) Humidity : 30 % to 90 % (operation)/10 % to 90 % (storage) Power supply : One Olympus lithium ion battery (LI-42B) Dimensions : 95.
55 EN SAFETY PRECA UTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE.
56 EN • Keep young children, infants, and animals such as pets away from the camera. • Always use and store the camera out of the reach of young children and infants to prevent the following dangerous situations which could cause serious injury: • Becoming entangled in the camera strap, causing strangulation.
57 EN • The camera may malfunction if it is used in a location where it is subject to a magnetic/electromagnetic fi eld, radio waves, or high voltage, such as near a TV set, microwave, video game, loud speakers, large monitor unit, TV/radio tower , or transmission towers.
58 EN • Using an exhausted battery may cause the camera to turn off without displaying the battery level warning. • The Olympus lithium ion battery is designed to be used only for the Olympus digital camera. Do not use the battery to other devices.
59 EN Warning Warning Unauthorized photographing or use of copyrighted material may violate applicable copyright laws. Olympus assumes no responsibility for unauthorized photographing, use or other acts that infringe upon the rights of copyright owners.
60 EN The customer is liable and shall pay for shipment of the Products to the Olympus Service Center . Olympus shall not be obligated to perform preventive maintenance, installation, deinstallation, or maintenance.
61 EN Representations and warranties made by any person, including but not limited to dealers, representatives, salespersons, or agents of Olympus, which are inconsistent or in con fl ict with or in .
62 EN Provisions of warranty 1 If this product proves to be defective, although it has been used properly (in accordance with the written Handling Care and Operating instructions supplied with it), du.
63 EN For customers in Asia For customers in Asia Provisions of warranty 1 lf this product proves to be defective, although it has been used properly (in accordance with the written Handling Care and .
.
VM970901.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Olympus VG-180 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Olympus VG-180 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Olympus VG-180 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Olympus VG-180 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Olympus VG-180, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Olympus VG-180.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Olympus VG-180. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Olympus VG-180 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
