Manuale d’uso / di manutenzione del prodotto Microline 321 Turbo del fabbricante OKI
Vai alla pagina of 138
320T_tp.jpg User’s Guide P/N 59270107.
2 Microline 32 0/32 1 T urbo | Document Title and Part Number Microline 320/321 T urbo User ’ s Guide P/N 59270107 Disclaimer Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki Data assumes no responsibility for the results of errors beyond its control.
| User’s Guide: English 3 Cont ents Installation ................................................................ 1 9 Installation Hints .................................................................. 1 9 Installation Overview ...................
4 Microline 32 0/32 1 T urbo | Using Y our Printer ................................................... 3 8 T op of Form (TOF) ................................................................ 3 8 T op of Form (TOF) and Forms T ear-Of f ................
| User’s Guide: English 5 T roubleshooting ....................................................... 8 0 General Information ............................................................. 8 0 Internet Support ...........................................
6 Microline 32 0/32 1 T urbo | Accessories ............................................................... 9 8 Purchasing Accessories ......................................................... 98 Accessories: Part Numbers ..............................
| User’s Guide: English 7 Helpful Hints This section summarizes the features and capabilities directly connected to saving money and time. Details for these features and capabilities are provided in other sections of this document. Y ou may want to use some of our Helpful Hints when working with your machine.
8 Microline 32 0/32 1 T urbo | Saving Money Saving Money: Forms T ear-Off The Forms T ear-Of f feature allows a printed page (rear feed, continuous form) to be torn off without wasting paper or adjusting the printer .
| User’s Guide: English 9 Saving Time Saving Time: Internet Support Oki Data provides support via the Internet. Oki Data’ s main web site, www .okidata.
10 Microline 32 0/32 1 T urbo | The first line prints at the red line of the plastic paper shield (1) on the printhead. The T op of Form and Forms T ear-Off settings of your printer interact. How you set the T op of Form depends on the status of the Forms T ear-Of f menu setting.
| User’s Guide: English 11 Operation Tip: T urning the Platen Knob ! If you turn the platen knob when the printer is turned on, you will cause the T op of Form to mis-align.
12 Microline 32 0/32 1 T urbo | Introduction Thank you for purchasing this printer . This rugged 9-pin printer can meet the needs of harsh and demanding environments. The expanded printhead gap, zero- tear capability , and multiple paper feed paths allow the printer to handle a wide variety of media, including 6-part forms.
| User’s Guide: English 13 Printer Features • Super reliable, durable operation: 10,000 hours Mean Time Between Failures (MTBF)! • Expandable head gap for handling forms up to 0.031" (0.79 mm) thick through the bottom feed path using the optional push and/or pull tractor .
14 Microline 32 0/32 1 T urbo | P ar ts Identification The parts identified here are parts of the unit that you will use during normal operation. For accessories (consumables, options, replacement parts, and documentation), refer to “Accessories.” Printer Serial Number The serial number of your machine is on a label on the back of your machine.
| User’s Guide: English 15 Parts Identification: Rear Feed (Continuous Forms) 1 Paper Guides 2 Paper Separator 3 Paper Lever 4 On-Off Switch 5 Platen Knob 6 Control Panel 7 Acoustic Cover 8 Access Cover ! Move the paper lever to the position marked “REAR.
16 Microline 32 0/32 1 T urbo | QUIET PARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Micro Feed Down PRINT QUALITY CHARACTER PITCH HSD NLQ UTL SSD.
| User’s Guide: English 17 Front Panel Lights 32T -FP .eps QUIET P ARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Micro Feed Down PRINT QUALITY C.
18 Microline 32 0/32 1 T urbo | Front Panel Keys 32T -FP .eps QUIET P ARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Micro Feed Down PRINT QUALITY CHARACTER PITCH HSD NLQ UTL SSD 10 12 15 17 20 PROP 4 5 6 1 2 3 7 9 8 1 SEL: Selects/deselects printer (printer on-line / off-line).
| User’s Guide: English 19 • Y our printer has a grounded, 3-prong plug as a safety feature, and it will only fit into a grounded outlet. If you can not plug it in, chances are that you have an older , non- grounded outlet. Contact an electrician to have it replaced with a grounded outlet.
20 Microline 32 0/32 1 T urbo | • If you’re using an extension cord or power strip with the printer , make sure that the total of the amperes required by all the equipment on the extension is less than the extension’ s rating. Generally , the total ratings of all equipment plugged into any one power line should not exceed 15 amperes.
| User’s Guide: English 21 Customizing the Installation Y our printer has many settings (defaults) that do not need to be adjusted as part of a standard installation.
22 Microline 32 0/32 1 T urbo | T op of Form (T OF) ! If you turn the platen knob when the printer is turned on, you will cause the T op of Form to mis-align. Always turn the printer off before turning the platen knob! ! The factory default setting for the T op of Form (where the printing should begin) is one inch down from the top of the page.
| User’s Guide: English 23 QUIET PARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Micro Feed Down PRINT QUALITY CHARACTER PITCH HSD NLQ UTL SSD 10 12 15 17 20 PROP 1 2 3 Unpacking the Machine Before you begin, be sure that all the items listed below are included in your package.
24 Microline 32 0/32 1 T urbo | Shipping Restraints 1 Open the access cover (1). Remove the printhead shipping restraint (2) and tape. Turbo-1.eps 2 Grasp the tabs and lift off the paper separator (1). Remove the shipping restraint (2). Turbo-15.eps and Turbo-16.
| User’s Guide: English 25 Ribbon Cartridge 1 Make sure the printer is turned OFF . 2 Center the printhead (1). 32T -18.eps 3 If you are replacing the ribbon: swing the front of the cartridge up off the printhead, then lift the cartridge out and discard it.
26 Microline 32 0/32 1 T urbo | Ribbon Cartridge Handling • Leave unused ribbon cartridges in their packages until needed. • When replacing a ribbon cartridge, re-use the packaging to dispose of the old ribbon cartridge. • Be careful when removing the ribbon cartridge.
| User’s Guide: English 27 Computer Connections Three interface types are available for your printer . • Parallel • Serial (25 pin) • Network (RJ45) Attach the interface cable to the appropriate port on your computer . ! FCC regulations require the use of a shielded cable no longer than 6 ft.
28 Microline 32 0/32 1 T urbo | Power Connections 1 Make sure both the printer and the computer are OFF . 2 Plug the power cord into the back of the printer (1), then into a grounded outlet (2). 59#11.eps and Plugin.eps 3 T urn on the printer . 32T -01A.
| User’s Guide: English 29 Paper Loading Rear Feed, Continuous Forms Use the rear-feed path for printing on single-thickness, continuous-form paper . Use the single-sheet path (top feed) for graphics or charts. ! If you have paper in the paper path, be sure to remove it before installing rear-feed paper .
30 Microline 32 0/32 1 T urbo | 3 Pull up on the lock levers and open the tractor covers. Then, move the right tractor to fit the width of the paper . 32T -27.eps 4 Place the first two holes in the paper over the tractor pins on either side. Close the tractor covers.
| User’s Guide: English 31 7 Install the paper separator . Place the wire guide (1) on the pull-up roller assembly (2). 32T -31.eps 8 Press FF/LOAD. The paper feeds into the printer . ! The factory default setting for the T op of Form (where the printing should begin) is one inch down from the top of the page.
32 Microline 32 0/32 1 T urbo | 4 Make sure the wire feed guide (1) is secured in the sheet guide. 32T -33.eps QUIET PARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT .
| User’s Guide: English 33 Emulations Available Emulations Y our printer has three emulations: • Epson ® FX (ESC/P) • IBM ® Proprinter III (PPSII) — factory setting • OKI DA T A ® MICROLINE ® Standard Changing Emulations 1 Make sure paper is loaded.
34 Microline 32 0/32 1 T urbo | T esting the Printer Running the printer self tests is a good way to check the installation of your printer . The two self tests are: • Font Sample T est • Rolling ASCII T est ! Microline 321 Turbo (wide carriage model) If you are using 8.
| User’s Guide: English 35 F ont Sample T est ! Microline 321 Turbo (wide carriage model) If you are using 8.5 inch paper to run the test, make sure the paper width selection in the printer menu is set to 8.5 inches. Otherwise, printing on the platen may damage the printer .
36 Microline 32 0/32 1 T urbo | Rolling AS CI I T est ! Microline 321 Turbo (wide carriage model) If you are using 8.5 inch paper to run the test, make sure the paper width selection in the printer menu is set to 8.5 inches. Otherwise, printing on the platen may damage the printer .
| User’s Guide: English 37 Printer Drivers Selecting Printer Drivers Before you can use your printer , you must select the correct printer driver in your software. If you select the wrong driver , you will see strange characters, incorrect fonts, etc.
38 Microline 32 0/32 1 T urbo | T op of Form sets the print start position for the printer . It is adjustable in increments of 1/144 of an inch. The amount of adjustment is limited to avoid paper jams. The first line prints at the red line of the plastic paper shield (1) on the printhead.
| User’s Guide: English 39 T op of Form (T OF) and Forms T ear-Off ! If you turn the platen knob when the printer is turned on, you will cause the T op of Form to mis-align. Always turn the printer off before turning the platen knob! ! Y our software may print the first line of print above or below where TOF is set.
40 Microline 32 0/32 1 T urbo | Setting T op of Form, Forms T ear-Off ON (Step A) ! If you turn the platen knob when the printer is turned on, you will cause the T op of Form to mis-align. Always turn the printer off before turning the platen knob! ! Always determine the status of the Forms T ear-Off menu setting BEFORE setting the T op of Form.
| User’s Guide: English 41 8 As you continue to hold SHIFT , press the LF / Micro Feed Down (2), or FF/LOAD / Micro Feed Up (3), depending on which direction you want to move the paper to align T op of Form. Press LF / Micro Feed Down to decrease the space (move T op of Form higher).
42 Microline 32 0/32 1 T urbo | Setting T op of Form, Forms T ear-Off OFF (Step B) ! If you turn the platen knob when the printer is turned on, you will cause the T op of Form to mis-align. Always turn the printer off before turning the platen knob! ! Always determine the status of the Forms T ear-Off menu setting BEFORE setting the T op of Form.
| User’s Guide: English 43 Press LF / Micro Feed Down to decrease the space (move T op of Form higher). The paper moves down. Press FF/LOAD / Micro Feed Up to increase the space (move T op of Form lower).
44 Microline 32 0/32 1 T urbo | T emporary T op of Form Change ! If you turn the platen knob when the printer is turned on, you will cause the T op of Form to mis-align.
| User’s Guide: English 45 Reset T op of Form to Factory Default ! If you turn the platen knob when the printer is turned on, you will cause the T op of Form to mis-align.
46 Microline 32 0/32 1 T urbo | F orms T ear-Off ! The status of the Forms T ear-Off menu setting af fects how you set the T op of Form. T o determine the status of the Forms T ear-Off menu setting, refer to “Using Y our Printer , T op of Form, Forms T ear-Off Status (ON or OFF).
| User’s Guide: English 47 Changing the Forms T ear-Off Setting The default setting for Forms T ear-Of f is OFF . 32T -FP .eps QUIET PARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Micro Feed Down T o change the Forms T ear-Of f setting: 1 Press SEL (1) + SHIFT (2).
48 Microline 32 0/32 1 T urbo | Automatic F orms T ear-Off Forms T ear-Off must be set to ON in the menu for Automatic Forms T ear-Of f to occur . Automatic Forms T ear-Off automatically moves the paper from the initial printing position (print start position) to the tear-off position, after a time interval which you select through the menu.
| User’s Guide: English 49 Manual Forms T ear-Off Manual Forms T ear-Of f allows you to advance a single page to the tear-off position. Manual Forms T ear-Off works when Forms T ear-Of f is turned off (deactivated in the printer menu).
50 Microline 32 0/32 1 T urbo | F orms T ear-Off set ON If you press TEAR (1) when Forms T ear-Of f is turned on (activated in the printer menu), the printer retracts the paper to the T op of Form position. ! Forms T ear-Off CANNOT be used when the optional pull tractor is engaged.
| User’s Guide: English 51 Paper Park ! Never park labels! Paper park allows you to print a single sheet (cut-sheet) page without removing continuous feed paper from the printer . Press P ARK (1) to retract rear-feed paper from the paper path. 32T -FP .
52 Microline 32 0/32 1 T urbo | Changing Paper Paths Continuous-forms to single-sheet feed 1 T ear off any printed pages. 2 Press P ARK. 3 Raise the paper separator to the single-sheet feed position. 4 Place the wire feed guide in the paper separator .
| User’s Guide: English 53 Printhead Gap The printhead gap is the distance between the printhead and the platen. ! Make sure the printer is turned off before you open the access cover . T o adjust the gap, open the access cover and move the blue lever (1) to the recommended setting from the table.
54 Microline 32 0/32 1 T urbo | Expanded Printhead Gap Y our printer can be used for dedicated bottom-feed printing on extra-thick multi-part forms. Extra-thick multi-part forms range from 0.017-inch (0.43 mm) to a maximum of 0.03 inch (0.79 mm). T o print on extra-thick multi-part forms, you engage the expanded printhead gap feature.
| User’s Guide: English 55 5 Swing up the printhead clamp, then remove it by pushing forward (toward the platen) and to the left. 32T -hg01.eps and 32T -hg02.eps CAUTION ATTENTION VORSICHT HOT CHAUD HEISS 55091086 CAUTION ATTENTION VORSICHT HOT CHAUD HEISS 55091086 6 Remove the printhead.
56 Microline 32 0/32 1 T urbo | 9 Replace the printhead, making sure that the circuit board at the bottom of the printhead firmly engages the slot (1) in the carriage. 32T -hg06.eps ! CAUTION! Be sure the printhead is fully inserted before proceeding.
| User’s Guide: English 57 11 Reinstall the ribbon cartridge. 32T -19dn.eps 12 Replace the pull-up roller assembly and the access cover , then turn the printer on.
58 Microline 32 0/32 1 T urbo | Print Quality ! Important! Front panel settings for print quality and character pitch are overridden by software commands.
| User’s Guide: English 59 Super Speed Draft T o use Super Speed Draft (SSD), enter the Menu Mode and make changes as follows: 1 Press SHIFT + SEL. 2 Press GROUP twice. 3 Press SET until DRAFT prints as the setting for the Print Mode. 4 Press ITEM. 5 Press SET (SSD prints).
60 Microline 32 0/32 1 T urbo | Character Pitch Press CHARACTER PITCH/RESET to select the width of characters in characters per inch, or Proportional. 32T -FP .
| User’s Guide: English 61 QUIET PARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Micro Feed Down 1 GROUP: Prints the next Group in the Menu. W ith the SHIFT key , prints the previous Group. 2 ITEM: Prints next Item in the Group.
62 Microline 32 0/32 1 T urbo | Entering and Exiting Menu Mode T o enter or exit the Menu Mode, hold SHIFT while pressing SEL. Moving Through the Menu When the printer is in Menu Mode, you can move forward or backwards through the menu. Moving Forward T o move forward, press GROUP , ITEM, or SET , whichever is appropriate.
| User’s Guide: English 63 Resetting Menu to Factory Defaults ! AL W A YS print the current Menu Mode settings before you reset or change the Menu settings. Printing the settings is the only way to have a record of the settings. T o print the Menu Mode Settings, refer to “Using Y our Printer , Menu Mode, Printing the Menu Settings.
64 Microline 32 0/32 1 T urbo | Changing the Menu Settings ! AL W A YS print the current Menu Mode settings before you reset or change the Menu settings. Printing the settings is the only way to have a record of the settings. T o print the Menu Mode Settings, refer to “Using Y our Printer , Menu Mode, Printing the Menu Settings.
| User’s Guide: English 65 Group Item Settings (Defaults are set in bold italic) Printer Control Emulation Mode IBM PPR , EPSON FX, ML Font Print Mode Utility , NLQ Courier , NLQ Gothic, Draft Draft Mode HSD , SSD Pitch 10 cpi , 12 cpi, 15 cpi, 17.
66 Microline 32 0/32 1 T urbo | Menu Settings T able (Continued) For a complete explanation of each menu item, refer to “Using Y our Printer , Menu Mode, Explanations of Menu Items.” The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in bold italic .
| User’s Guide: English 67 Menu Settings T able (Continued) For a complete explanation of each menu item, refer to “Using Y our Printer , Menu Mode, Explanations of Menu Items.” The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in bold italic .
68 Microline 32 0/32 1 T urbo | Menu Settings T able (Continued) For a complete explanation of each menu item, refer to “Using Y our Printer , Menu Mode, Explanations of Menu Items.” The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in bold italic .
| User’s Guide: English 69 Menu Settings T able (Continued) For a complete explanation of each menu item, refer to “Using Y our Printer , Menu Mode, Explanations of Menu Items.” The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in bold italic .
70 Microline 32 0/32 1 T urbo | Explanations of Menu Items Refer to “Using Y our Printer , Menu Mode, Menu Settings T able” for an overview of the menu structure. 7 or 8 Bits Data W ord (ML). If your computer system uses seven bits to make up each unit of data, change this setting to 7.
| User’s Guide: English 71 Explanations of Menu Items (Continued) Refer to “Using Y our Printer , Menu Mode, Menu Settings T able” for an overview of the menu structure. Page Length. Selects the length of the paper you are using. Page Width (Wide Carriage only).
72 Microline 32 0/32 1 T urbo | Explanations of Menu Items (Continued) Refer to “Using Y our Printer , Menu Mode, Menu Settings T able” for an overview of the menu structure. Print Suppress Effective. If your system uses the DC1 and DC3 codes for something other than the print suppress mode, change the setting to No.
| User’s Guide: English 73 Maint enance Replacing the Ribbon Cartridge If you need instructions for replacing the ribbon cartridge, you can refer to the • packaging of the new cartridge • web site • “Installation, Ribbon Cartridge.” For the best results, use genuine OKI ribbons.
74 Microline 32 0/32 1 T urbo | Printer Cleaning Y ou should clean the printer every six months (or after about 300 hours of operation). ! Never use solvents or strong detergents on the cabinet: they could cause damage. 1 T urn off the printer . Then, use the platen knob to back the paper out of the printer .
| User’s Guide: English 75 Paper Jams Rear-Feed Paper Jams 1 T urn off the printer . Then, use the platen knob to back the paper out of the printer . 32T -01B.eps and 32T -37BK.eps A ! Make sure the printer is turned off before you open the access cover .
76 Microline 32 0/32 1 T urbo | 3 Remove any torn pieces of paper . 4 Grasp the tabs and lift off the paper separator . Load paper . 32T -23A.eps 5 Install the paper separator . Install the pull-up roller assembly . Close the access cover . 32T -23A.eps and 32T -04DN.
| User’s Guide: English 77 Rear-Feed, Repeating Paper Jams If the paper keeps jamming, you probably have bits of paper stuck in the paper path. 1 T urn off the printer . Then, use the platen knob to back the paper out of the printer . 2 Open the access cover .
78 Microline 32 0/32 1 T urbo | 6 Remove any paper pieces. Then, use the platen knob to back the paper out. 32T -42R.eps 7 Load regular paper . Install the paper separator . 32T -23A.eps 8 Install the pull-up roller assembly . Close the access cover .
| User’s Guide: English 79 4 Remove any torn pieces from around the carriage. 5 Install the pull-up roller assembly . Close the access cover . 32T -44Dn.
80 Microline 32 0/32 1 T urbo | T roubleshooting General Information Here are some general things to check before proceeding with detailed troubleshooting.
| User’s Guide: English 81 List of Problems Problem 1: My word processor files do not print the way I have the menu and front panel set. Problem 2: Nothing happens when I turn on the printer . Problem 3: The printer does not print when the computer sends data.
82 Microline 32 0/32 1 T urbo | Problem 1: My word processor files do not print the way I have the menu and front panel set. Solution: Always remember that: 1 Settings in your software application will override any settings in your printer driver .
| User’s Guide: English 83 Problem 2: Nothing happens when I turn on the printer . Solution: Check the power cord connection to the outlet. If you are using a power strip, make sure it is turned on, and that a fuse hasn’t blown or that a circuit breaker hasn’t tripped.
84 Microline 32 0/32 1 T urbo | Problem 5: Ink smears on the paper when I print on narrow forms. Solution: This may be caused by excessive printhead travel from the centering position. Enter the Menu and set the Centering Position to MODE 1. Refer to “Using Y our Printer , Menu Mode.
| User’s Guide: English 85 Problem 9: The ALARM light is on and the Character Pitch 15 light is flashing. Solution: This indicates a paper jam. Press the SEL key and correct the paper jam situation. Refer to “Maintenance, Paper Jams.” Problem 1 0: The printer needs paper , but the ALAR M light is not on and I cannot load the paper .
86 Microline 32 0/32 1 T urbo | Specifications Characters per Line (cpl) Setting ML320 Turbo ML321 Turbo 10 cpi 80 cpl 136 cpl 12 cpi 96 cpl 163 cpl 15 cpi 120 cpl 204 cpl 17.
| User’s Guide: English 87 Graphics Resolution Emulation Maximum Resolution Epson/IBM 240 (H) x 216 (V) dpi OKIDA T A 288 (H) x 144 (V) dpi Resident Fonts Print Quality A vailable Fonts Near Letter .
88 Microline 32 0/32 1 T urbo | Paper Specifications Microline 320 T urbo Paper T ype: Cut Sheet Feed: To p W eight: 14-24 lb. (52.5-90 g/m 2 ) Width Range: 7.2" to 8.5" (182.8 to 215.9 mm) Paper T ype: Single-part, continuous forms Feed: Rear , Bottom W eight: 12-24 lb.
| User’s Guide: English 89 Paper Specifications Microline 321 T urbo Paper T ype: Cut Sheet Feed: To p W eight: 14-24 lb. (52.5-90 g/m 2 ) Width Range: 7.2" to 14.3" (182.8 to 363.2 mm) Paper T ype: Single-part, continuous forms Feed: Rear , Bottom W eight: 12-24 lb.
90 Microline 32 0/32 1 T urbo | Paper Thickness Rear Feed 0.014" (0.36 mm) maximum Bottom Feed* 0.017" (0.43 mm) maximum expandable to 0.031" (0.79 mm) maximum * Requires optional push or pull tractor . Printer Dimensions Width x Depth x Height ML320 T urbo 15.
| User’s Guide: English 91 Service and Suppor t General Information Oki Data offers service and support to you through a variety of methods. Please chose the service and support method that is best for you.
92 Microline 32 0/32 1 T urbo | Documentation The documentation provided with your machine provides an excellent reference for the day-to-day operation of your machine.
| User’s Guide: English 93 my .okidata.com Y our Personal Solutions Center my .okidata.com is a powerful area of Oki Data’ s web site designed to help you personalize the information and service you get from Oki Data. When you register for my .okidata.
94 Microline 32 0/32 1 T urbo | T elephone Suppor t Oki Data Customer Information System Information System Automated Attendant 1-800-654-3282 (1-800-OKI-DA T A) T oll Free in the U.S. and Canada For quick answers to commonly-asked questions, the Oki Data Information System Automated Attendant is available 24 hours a day , 7 days a week.
| User’s Guide: English 95 Service Centers Authorized Service Providers Oki Data has over 2,000 local Authorized Service Providers in North and South America. For the most comprehensive, up-to-date listing of Oki Data authorized Service Centers: • Consult our web site at www .
96 Microline 32 0/32 1 T urbo | Service and Support: United States and Canada Oki Data is firmly committed to the satisfaction of our customers. If you have problem that your customer documentation cannot solve, contact the listed sources for service or support.
| User’s Guide: English 97 Service and Support: Latin America Oki Data is committed to offer the best customer support possible to our customers. In the instance of having a difficult problem with your OKI product, please contact any of the OKI- CAS (Centro Autorizado de Servicio) shown on our W eb site, www .
98 Microline 32 0/32 1T urbo | Accessories • Consult the dealer where your purchased your machine. • Locate an Authorized Oki Data Reseller by visiting one of these web sites - http://my .okidata.com Allows you to register your product and personalize your own support needs - http://www .
| User’s Guide: English 99 32T -20.bmp 32T -PT01.eps 32T -PT52.eps 32T -rps.tif and 32TCSF02.eps Accessories: Part Numbers Consumables: Part Numbers Consumable Part Number Ribbon Cartridge (1) -----.
100 Microline 3 20/3 21T urbo | 32T -Knob.tif and PowrCord.eps 32T -Head.tif and 32T -Rolr.tif Replacement Parts: Part Numbers Replacement Part ------------------------------------- Order No.
| User’s Guide: English 101 Print er Control Codes ! The Microline Reference Manual is ONLY available in American English. This section lists the most commonly used printer control codes. The Microline Reference Manual provides complete lists of all the commands, along with information on their use.
102 Microline 3 20/3 21T urbo | Epson FX Commands Epson Command ASCII Decimal Backspace B S 8 Carriage Return, Execute CR 1 3 Character Pitch Select 10 cpi ESC P 27 80 Select 12 cpi ESC M 27 77 Select.
| User’s Guide: English 103 Epson FX Commands (Continued) Epson Command ASCII Decimal Paper Out Sensor Off ESC 8 27 56 Paper Out Sensor On ESC 9 27 57 Print Quality/Font Select HSD/SSD, depending on.
104 Microline 3 20/3 21T urbo | IBM Command ASCII Decimal Form Length, n inches (n = 1 to 22) ESC C NUL n 27 67 0 n Form Length, n lines (n = 1 to 255) ESC C n 27 67 n Horizontal T ab, Execute H T 9 I.
| User’s Guide: English 105 IBM Proprinter III Commands (Continued) IBM Command ASCII Decimal Stop Printing ESC j 27 106 Subscript On ESC S 1 27 83 49 Superscript On ESC S 0 27 83 48 Subscript/Super.
106 Microline 3 20/3 21T urbo | Oki Data MICROLINE Standard Commands Oki Data Command ASCII Decimal Enhanced Printing On ESC H 27 72 Enhanced Printing Off ESC I 27 73 Form Feed F F 1 2 Horizontal T ab.
| User’s Guide: English 107 Oki Data MICROLINE Standard Commands (Continued) Oki Data Command ASCII Decimal Underline Printing On ESC C 27 67 Underline Printing Off ESC D 27 68 Uni-Directional Print.
108 Microline 32 0/32 1 T urbo | W arranty , Regulatory , and Safety Information Limit ed W arranty: United Stat es and Canada Oki Data Americas, Inc. (Oki Data) warrants this printer to be free from defect in material and workmanship and will remedy any such defect according to the terms of this Limited W arranty .
| User’s Guide: English 109 THERE ARE NO EXPRESS W ARRANTIES OTHER THAN THOSE ON THE F ACE HEREOF AND DESCRIBED ABOVE. NO W ARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED T O, ANY .
110 Microline 32 0/32 1 T urbo | Limited W arranty: Latin America Oki Data warrants this printer (hereinafter Product) to be free in defect in material and workmanship and will remedy any such defect according to the terms of this Limited W arranty .
| User’s Guide: English 111 Service and Support: United States and Canada Oki Data is firmly committed to the satisfaction of our customers. If you have a problem that your customer documentation cannot solve, contact the listed sources for service or support.
112 Microline 32 0/32 1 T urbo | T elephone Support: United Stat es and Canada Oki Data Customer Information System Customer Support Professionals 1-800-654-3282 (1-800-OKI-DA T A) T oll Free in the U.S. and Canada Customer Support Professionals are available 24 hours a day , 7 days a week.
| User’s Guide: English 113 Service and Support: Latin America Oki Data is committed to offer the best customer support possible to our customers. In the instance of having a difficult problem with your OKI product, please contact any of the OKI- CAS (Centro Autorizado de Servicio) shown on our W eb site, www .
114 Microline 32 0/32 1 T urbo | Oki Data on the Internet www .okidata.com Y our Gateway to OKI Pr oducts and Services www .okidata.com is Oki Data’ s web site. It provides general information about all of the OKI products and services available to you.
| User’s Guide: English 115 Oki Data Service Centers Oki Data Authorized Service Providers Oki Data has over 2,000 local Authorized Service Providers in North and South America. For the most comprehensive, up-to-date listing of Oki Data authorized Service Centers: • Consult our web site at www .
116 Microline 32 0/32 1 T urbo | Material Safety Data Sheet (MSDS) F or Black Ribbon, P/N 52 102 00 1 MSDS #5 806480 1 Current as of March 1, 200 1 For more information, contact Oki Data at: 2000 Bish.
| User’s Guide: English 117 Hazardous Ingredients Carbon Black CAS# 1333-86-4 OSHA PEL 3.5 mg/m 3 ACGIH TL V 3.5 mg/m 3 Coloring Material CAS# N/A OSHA TW A N/A ACGIH TL V N/A Oil CAS# N/A OSHA TW A.
118 Microline 32 0/32 1 T urbo | Physical Data Melting Point: N/A Boiling Point: N/A V apor Pr essure: N/A V apor Density (Air = 1): N/A Evaporation Rate (Butyl Acetate = 1): N/A Specific Gravity (H 2.
| User’s Guide: English 119 Spill Cleanup and Disposal Spill Cleanup If the ribbon is inadvertently pulled out, it should be rewound on the reel using the take-up knob.
120 Microline 32 0/32 1 T urbo | Safety Information Y our OKI printer has been carefully designed to give you years of safe, reliable performance. As with all electrical equipment, there are a few basic precautions you should take to avoid hurting yourself or damaging the printer: • Carefully read all setup and operating instructions.
| User’s Guide: English 121 • Do not poke anything into the ventilation slots on the sides of the printer . Y ou could get a shock or cause a fire. • Aside from the routine maintenance described in this document, don’t try to service the printer yourself.
122 Microline 32 0/32 1 T urbo | Federal Communications Commission (FCC) FCC Radio Frequency Interference Statement for 1 20-V olt Models W ARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
| User’s Guide: English 123 FCC Radio Frequency Interference Statement for 23 0/240-V olt Models W ARNING: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules.
124 Microline 32 0/32 1 T urbo | European Union Council of the European Communities Statement of Electromagnetic Conformance for 230/ 240-V olt Models This product complies with the requirements of the Council Directive 89/336/EEC on the approximation of the laws of the member states relating to electromagnetic compatibility .
| User’s Guide: English 125 Index Symbols 0 character (slashed, unslashed) 65, 72 10 cpi (Front Panel Light) 17, 60 12 cpi (Front Panel Light) 17, 60 120 volt printer 90 15 cpi (Front Panel Light) 1.
126 Microline 32 0/32 1 T urbo | C Cable Length 27 Parallel 27 Serial Interface 27 Shielded 27 Canada Customer Support 112 Locating a service center 115 Service 94, 96, 111 Service Center (Oki Data) 9.
| User’s Guide: English 127 D Danish (Language) 65 Data W ord 70 7 bit 68 8 bit 68 DC1 code 72 DC3 code 72 DEL Code 71 Depth of printer 90 Detergent, cleaning the housing 74 Documents, Print Quality.
128 Microline 32 0/32 1 T urbo | Forms Continuous Carbonless 88, 89 Interleaf 88, 89 Single-part 88, 89 Multipart and Printhead Gap 53 Narrow width 84 Thick 54 Thickness ranges 13 Zero-T ear 13 Forms .
| User’s Guide: English 129 H Height Double height printing 72 of Printer 90 Help. See Service and Support High Speed Draft HSD Front Panel Light 17 Mode 13, 86, 87 Print Quality 58 Humidity Operati.
130 Microline 32 0/32 1 T urbo | L Labels 88, 89 Paper Park 51 Printhead Gap Setting 53 Language 65, 71 Latin America Customer Support 113 Language 65 Locating a service center 95, 115 Service 97 W ar.
| User’s Guide: English 131 N Near Letter Quality 58 NLQ 86, 87 NLQ Front Panel Light 17 Norwegian 70 Code Page 65 Language 65 O Off-line, SEL key 18 Oki Data Contact Information e-mail 2 Latin Amer.
132 Microline 32 0/32 1 T urbo | Paper Feed Continuous to single-sheet feed 52 Cut Sheet Feeder (Option) 99 FF/LOAD key 18 LF key 18 P ARK key 18 QUIET key 18 Roll Paper Stand (Option) 99 Single-sheet.
| User’s Guide: English 133 Print Registration 67, 71 Forms T ear-Of f 46, 47, 48 Shift left 67 Shift right 67 Print Server Option 99 Print Size 86 Smallest 60 Standard 60 Print Speed 13, 86 High (H.
134 Microline 32 0/32 1 T urbo | Productivity . See Money , Saving; Time, Saving Proof of Purchase 96 PROP characters per inch (cpi) 60 Front Panel Light 17 Proportional Spacing 60, 65, 72 Proprinter .
| User’s Guide: English 135 S Safety , General Information 120 Saving Money . See Money , Saving Saving Time. See Time, Saving Security Controlling access to the printer 11 SEL Front Panel Key 18 Fr.
136 Microline 32 0/32 1 T urbo | SSD Front Panel Light 17, 86, 87 Standard Character Set 65, 70 Static charges and paper 85 Stationery 31 Super Speed Draft 13, 58, 59, 70 Support 91 Documentation 92 G.
| User’s Guide: English 137 Troubleshooting Aborting print jobs 67, 72, 87 ALARM flashing 17, 84 ALARM lit 17 ALARM lit, 10 cpi flashing 17, 84 ALARM lit, 15 cpi flashing 17, 85 ALARM lit, no other .
138 Microline 32 0/32 1 T urbo | U Uni-directional printing, graphics 67 United States Customer Support 112 Locating a service center 115 Service 94, 96, 111 Service Center (Oki Data) 95, 115 W arrant.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il OKI Microline 321 Turbo è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del OKI Microline 321 Turbo - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso OKI Microline 321 Turbo imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul OKI Microline 321 Turbo ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il OKI Microline 321 Turbo, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del OKI Microline 321 Turbo.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il OKI Microline 321 Turbo. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo OKI Microline 321 Turbo insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
