Manuale d’uso / di manutenzione del prodotto 9802 S del fabbricante Nokia
Vai alla pagina of 50
Owner’ s Manual MEDIAMASTER 9802 S.
Hereby , Nokia declares that this digital receiver , Nokia Mediamaster 9802 S, is in conformity with es- sential requirements and other relevant provisions of Directive 1999/5/EC.
GB 3 MEDIAMASTER 9802 S Contents General information 4 For your safety 4 Remote control 5 Front and rear panel 6 V iaccess smartcard 7 CA module with its smartcard 7 Preparing the remote control 8 Con.
GB 4 GENERAL INFORMA TION ABOUT THE MEDIAMASTER FOR YOUR SAFETY Throughout this manual you will notice that the everyday operation of your Mediamaster is based on a series of user friendly on-screen displays and menus.
GB 5 Switch the Mediamaster in and out of standby mode. EXIT TV Return to the viewing mode from a menu without storing any settings (in menu mode). Switch between TV or Radio mode (in viewing mode). Tu rn the sound off/on (mute). - + Adjust the volume of digital programmes.
GB 6 AUDIO L R phono connectors Stereo outputs for connection to a HiFi system TV SCART for connection to the TV AUX SCART for connection to a VCR, or an analogue satellite receiver * LNB cable also feeds the LNB with a supply voltage of 13/18 V (V/H polari- sation) and a 0/22 kHz signal (bandswitch).
GB 7 V iaccess smartcard Only for services coded with the Viaccess CA system. • Insert your smartcard fully into the left slot behind the lid of the front panel of the Mediamaster . The gold chip should face downwards and inwards . PIN Code The Smartcard is loaded with a 4-digit code, also called a PIN code (Personal Identification Number).
GB 8 The box for your Mediamaster should contain the following items: • the Mediamaster • remote control with 2 AAA batteries • SCART cable (fully connected 1,0 metre) • aerial/RF cable (doubl.
GB 9 Connecting to the TV • Connect the SCART cable between the main SCAR T socket on the TV and the TV SCART socket on the Mediamaster . • Connect an RF cable from the TV/VCR output on the Media- master to the RF input socket on the TV . • Connect the TV aerial to the TV AERIAL input socket on the Mediamaster .
GB 10 Nokia smart switch Connecting a HiFi system • Connect an RCA/Cinch stereo cable from the AUDIO L R sock- ets on the Mediamaster to the LINE, AUX, SP ARE or EXTRA input sockets on your HiFi system.
GB 11 This procedure is necessary if your Mediamaster is con- nected to the TV with an RF cable, and not via SCART . To tune your TV to the RF signal you might also need your TV manual in addition to this manual. The steps below explain what to do if you have been unable to use SCART cables in your con- nection.
GB 12 Language Select the desired menu language. This will also be the main language for audio and subtitling. To select the Norwegian, Finnish and Greek language alternative you first have to press the double arrow button .
GB 13 Antenna/satellite selection Select one of the alternatives from line 1 to 4 if you have a sin- gle antenna equipped with one LNB for receiving signals from either ASTRA, HOTBIRD, THOR or SIRIUS.
GB 14 FIRST TIME INST ALLA TION Select one of the alternatives ASTRA, HOTBIRD, SIRIUS or THOR when you have a single LNB directed towards any of these sat- ellites. Pressing OK from the selected alternative will display the “An- tenna adjustment” menu (shown to the right) on the screen.
GB 15 FIRST TIME INST ALLA TION Select one of these alternatives when you have a single antenna equipped with 2 LNBs, or two antennas with one LNB on each, and want to watch channels from ASTRA/HOTBIRD or THOR/ SIRIUS. In this case you must first connect the LNBs to an external switch since there is only one antenna input on the Mediamaster .
GB 16 Line 7 on the antenna satellite selection Menu This selection is necessary only when your satellite choice dif- fers from the preprogrammed satellite alternatives in the follow- ing ways; • if you do not use an universal LNB • when you have more than two LNB’ s.
GB 17 Multisatellite/”mini DiSEqC” and “two port DiSEqC” Select one of these alternatives when your antenna system has two LNBs and when you not use any of the alternatives on the lines 5 - 6 from the menu “Antenna/satellite selection” on page 13.
GB 18 FIRST TIME INST ALLA TION Multisatellite/four port DiSEqC Select this alternative if your antenna system has four LNBs and when you are not using any of the alternatives on the lines 5 - 6 from the menu “Antenna/satellite selection” on page 13.
GB 19 FIRST TIME INST ALLA TION Manual search When you perform a Manual search you first need to enter some parameters for the channel search to work. The information you need to enter in this menu is available in magazines covering satellite TV reception, on the Internet or from your Service Provider .
GB 20 LNB type • Select Universal, one of the fixed frequencies or enter the LNB frequency with the numeric buttons on the remote control. T ype of motor • Select SA TSCAN if it is a Nokia SatScan motor . • Select DiSEqC in case the motor you use is controlled by DiSEqC commands.
GB 21 FIRST TIME INST ALLA TION Predefined channel Select the predefined channel that will give the best Signal qual- ity (SNR) bar indication. Within a few seconds you will get picture from the channel in the background. Adjust motor • If necessary , fine tune the motor with the buttons on the remote control.
GB 22 FIRST TIME INST ALLA TION • Select one of the Predefined channels and press OK to..... .....start the main search procedure for (in this case) the ASTRA channels.
GB 23 FIRST TIME INST ALLA TION Channel search progress This menu will be shown as long as the Mediamaster is search- ing for channels to download All channels found will be listed in two columns on the screen; with TV channels in one column and radio channels in the other .
GB 24 VIEWING MODE General information The following describes the basic functions of your Mediamaster while watching satellite TV or listening to satellite radio. Some of the functions described here are dependent on the Service Provider and can only be used if they are included in the transmitted programme information.
GB 25 VIEWING MODE The “i” (information) button The Mediamaster has the ability to display information about pro- grammes currently being broadcast as well as those being broad- cast next.
GB 26 List of TV and radio channels At the channel search procedure, three channel lists are created. One list named “All TV” containing all channels, another named “Free TV” containing only free channels and “Viasat” containing channels distributed by Viasat.
GB 27 VIEWING MODE TV release (0) With the 0 button you can toggle between analogue terrestrial TV , video, analogue and digital satellite TV signals. (This is only valid if the units are connected via SCART cables, and not by a RF connection.
GB 28 MAIN MENU General information Many of the functions of the Mediamaster are available from the Main menu. Press MENU to open it. Y ou can always leave a menu at any time you want, without af- fecting any settings, by pressing the EXIT button. TV and radio channels Please refer to “List of TV and radio channels” on page 26.
GB 29 Create list From here you create your own favourite lists, containing the channels you watch most frequently . Y ou must give each list a specific name, e.g. “Sport” or “Films.” When a favourite list is selected, you see only those channels defined in the list.
GB 30 Select channels From this menu you add and remove the channels in your Favour - ite lists. Y ou use the “All TV” or “All radio” list as basis to select the channels from.
GB 31 Rearrange channels From here you can arrange the sequence for the channels within your favourite lists. • With , mark the channel you want to move to a new posi- tion within the list. • Press again and the right side of the marked channel will change to .
GB 32 Update channels When new TV and radio channels are added to the different sat- ellites, you can check and automatically update the channel lists. New channels will be marked with a star in the channel lists. After each download, check the channel lists for new channels marked with .
GB 33 MAIN MENU System configuration Y ou will be asked to enter your access code before you can en- ter this menu. The code is preset to 1234 from the factory .
GB 34 Manual search When you perform a Manual search you first need to enter some parameters for the channel search to work. The information you need to enter in this menu is available in magazines covering satellite TV reception, on the Internet or from your Service Provider .
GB 35 Edit satellites When a new satellite has been sent into orbit, or if you select a not preprogrammed satellite, you can add it to the existing sat- ellite list. To add a new satellite • Select the line “New satellite”. • Press OK . • Enter the name of the new satellite.
GB 36 MAIN MENU V iew attributes Chech position and orientation for different satellites by select- ing the line “View attributes”. When your antenna is controlled by a motor: • Enter the “Channel search” menu. • Select “Manual” or “Advanced” search.
GB 37 MAIN MENU TV settings TV screen format Select your TV screen format. The 4:3 format is the standard format for most TV screens. Select 16:9 for a wide screen TV . TV signal If the teletext function does not work when watching channels from an analogue satellite receiver connected to the Media- master , change this setting from RGB to P AL.
GB 38 MAIN MENU Ti me adjustment The time is adjusted by using the buttons, ± 1/2 an hour at a time. Y ou can also adjust the minutes by using the buttons. Modem configuration The modem function is only working in the Scandinavian countries and Greece.
GB 39 MAIN MENU Receiver upgrade In order to keep the Mediamaster up-to-date, it will be possible to download new versions of the system software via satellite and from the Internet. New software may include new or im- proved features for existing menus.
GB 40 MAIN MENU Parental control To open this menu you will be asked to enter your access code. From the factory the access code is set to 1234 . The following settings can be altered from this menu. Receiver lock If you select “On,” you will have to enter the access code every time you start the Mediamaster from standby .
GB 41 Appearance preferences Banner time-out When you switch channels, an information banner will be shown for a few seconds. Y ou can select for how long the banner will be shown. V olume bar Select whether or not you want the volume bar to appear on the screen when you change the volume.
GB 42 MAIN MENU System information If you have to contact your service provider or a service center , they might ask for information available from this menu.
GB 43 Conditional Access This menu will only be activated if you have inserted a valid Smart- card in the slot behind the front lid. If more than one CA system is activated, select the one from which you want information. The Viaccess Conditional Access (CA) System is embedded in the Mediamaster .
GB 44 MAIN MENU Ti mer settings Select T imer from the Main Menu. Select channel list and channel with the buttons. The chan- nel can also be entered with the numeric buttons. The present date (month/day) will automatically be preselect. Always enter settings with two digits for month, day , hour and minute.
GB 45 Parental control A feature that allows parents to ”lock” programmes that they consider unsuitable for children. A ”locked” chan- nel or programme can only be ”unlocked” with the spe- cial parental access code. Parental Access code A four -digit code stored in the Mediamaster .
GB 46 Problem The display on the front panel does not light up/is not lit. No sound or picture, but the front panel shows the time or - - : - -. No sound or picture. No sound or picture on horizontal modulated transponder . Bad picture/blocking error .
GB 47 PROBLEM SOL VING FRONT P ANEL DISPLA Y Problem The remote control is not working. Y ou see the on-screen message. V iewing card error . Y ou have forgotten your secret PIN code. CA Module is not working. No picture. Possible causes Battery exhausted.
GB 48 T ransmission standards DVB, MPEG 2 LNB / T uner input Connector 1x F-type (LNB) RF input frequency 920-2150 MHz RF input power level -20 to -70 dBm Supply voltage 13,5 /18,5 V ± 5% Max. current 500 mA, overload protected Control voltage 22 kHz, 0,65 V pp DiSEqC T one burst A/B or Level 1.
.
66 76963-43 © 0232 Nokia is a registered trademark of Nokia Corporation www .nokia.com.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Nokia 9802 S è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Nokia 9802 S - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Nokia 9802 S imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Nokia 9802 S ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Nokia 9802 S, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Nokia 9802 S.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Nokia 9802 S. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Nokia 9802 S insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
