Manuale d’uso / di manutenzione del prodotto WN802T del fabbricante NETGEAR
Vai alla pagina of 96
202-10415-01 September 2008 NETGEAR , Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA NETGEAR Wi reless-N Access Point WN802T v2 Reference Manual (802.
v1.0, Septembe r 2008 ii © 2008 by NETGEAR, Inc. All rights reserved.. T echnical Support Please refer to the support informat ion card that shipped with your prod uct. By registering your product at http://www .netgear .com/r egister , we can provide you with faster expert te chnical support and timel y notices of product and software upgrades.
v1.0, September 2008 iii Regulatory Compliance Information This section includes user requirements for operating this product in accordance with National laws for usage of radio spectrum and operation of radio devices.
v1.0, Septembe r 2008 iv FCC Requirement s for Operation in the United St ates FCC Information to User This product does not contain an y user serviceable co mponents and is to be us ed with approved an tenn as only .
v1.0, September 2008 v FCC Declaration Of Confo rmity W e NETGEAR, Inc., 4500 Great America Parkway , Santa Clara, CA 95054, declare under our sole responsibility that the model WN802T v2 NETGEAR W ireless- N Access Point WN802T v2 complies with Part 15 of FCC Rules.
v1.0, Septembe r 2008 vi Product and Publication Det ails Model Number: WN802T v2 Publication Date: September 2008 Product Family: Wireless Access Point Product Name: NETGEAR Wireless-N Access Point WN802T v2 Home or Business Prod uc t: Business Language: Engl ish Publication Part Number: 202-10415-01 Publication V ersion Number: 1.
ix v1.0, September 2008 Content s About This Manual Conventions, Formats and Scope ...................... ............. ................ ................ ................ xiii How to Use This Manual ................. ................ ................ .
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l x Contents v1.0, September 2008 Chapter 3 Wireless Security Settings Wireless Security Options ............................ ................ ............. ................ ............
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Contents xi v1.0, September 2008 The Ethernet light is not lit. .............. ............. ................ ................ ............. ............... 6-2 The WLAN light is not lit. ...
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l xii Contents v1.0, September 2008.
xiii v1.0, September 2008 About This Manual The NETGEAR ® W ir eless-N Access Point WN802T v2 Refer ence Manual describes how to install, configure, and troubleshoot the NETGEAR W ireless -N Acce ss Point WN802T v2. The information in this manual is intended for readers with intermediate computer and Internet skills.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l xiv About This Manual v1.0, September 2008 • Scope. This manual is written for the NETGEAR W ireless-N Access Point according to th.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual About This Manual xv v1.0, September 2008 • Printing a Page in the HTML V iew . Each page in the HTML version of the manual is dedicated to a major topic. Use the Pri nt button on the br owser toolbar to print the page contents.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l xvi About This Manual v1.0, September 2008.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Introduction 1-1 v1.0, September 2008 Chapter 1 Introduction This chapter describes some of the key feat ures of the NETGEAR W ireless-N Access Point WN802T v2. It also includes the mi nimum prerequisites for installation ( “System Requirements” on page 1-3 .
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 1-2 Introduction v1.0, September 2008 • Multi-In, Multi-Out (MIMO) technology . Provides improved co mmunication performance without additional band width or transmit p ower . . • S tandards Compliance .
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Introduction 1-3 v1.0, September 2008 System Requirement s Before installing the WN8 02T v2, make sure yo ur sys t em meets the follow ing requirements: • A 10/100/1000 Mbps Local Area Network device such a s a hub, switch or , router .
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 1-4 Introduction v1.0, September 2008 Y ou can use the status lights on the front of the wireless access point to verify various conditions described in the following table : . Figure 1-1 Front p anel status LEDs T able 1-1.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Introduction 1-5 v1.0, September 2008 Back Panel of the NETGEAR Wireless-N Access Point The back of the WN802T v2 contains the fo llowing listed items, viewed from top to bottom: 1. The Reset button, which is used to reset the WN802T v2 or restore the factory default settings.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 1-6 Introduction v1.0, September 2008 Figure 1-3 Label on ba ck p anel.
2-1 v1.0, September 2008 Chapter 2 Inst allation and Configuration This chapter describes how to set up your NETGEAR W ireless-N Access Point WN802T v2 for wireless connectivity to your LAN. This basic configuratio n will enable computers with 802.1 1 bgn or 802.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 2-2 Installation and Configuratio n v1.0, September 2008 For best results, place your wireless access point: • Near the center of the area in which your PCs will operate.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Installation and Configuration 2-3 v1.0, September 2008 3. Connect an Ethernet cable from th e WN802T v2 to the co mputer . 4. Connect the power adapter to the WN 802T v2 and veri fy the following: • The PWR power light goes on.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 2-4 Installation and Configuratio n v1.0, September 2008 • Click Lo gout to exit the WN802T v2. (Y ou will au tomatically be logged out of the wireless access point after 5 minutes of no activity .
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Installation and Configuration 2-5 v1.0, September 2008 T o select the local time zone: 1. Select Configuration > System > Basic > Ti me . The Time Settings screen displays. 2. Configure the following information: – Tim e Z o n e.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 2-6 Installation and Configuratio n v1.0, September 2008 3. .Click Apply to save your settings. T o configure the Basic LAN settings: 1. Select IP under Configuration on the main menu.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Installation and Configuration 2-7 v1.0, September 2008 – Primary DNS Server . The WN802T v2 uses this IP a ddress as the primary Domain N ame server used by station s on your LAN. – Secondary DNS Servers.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 2-8 Installation and Configuratio n v1.0, September 2008 2. Configure the W ireless LAN settings base d on the following field descriptions: • Wir eless Mode . Select the desired wireless oper ating mode by clicking inside the appropriate radio button: – 1 1b – 80 2.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Installation and Configuration 2-9 v1.0, September 2008 – If using multiple access points , it is better if adjacent access points use dif ferent channels to reduce inte rference. NETGEAR recomme nds a channe l spacing of 5 channels (for example, channels 1, 6, and 1 1).
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 2-10 Installation and Configuration v1.0, September 2008 Configuring QoS Settings WMM Support. W i-Fi Multimedia (WMM) is a Quality of Service (QoS) feature and part of the 802.1 1e standard.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Installation and Configuration 2-11 v1.0, September 2008 Configuring WMM Power Save WMM power save is a set of features in 802.1 1e that help to conserve power fo r battery -operated devices in a wireless LAN.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 2-12 Installation and Configuration v1.0, September 2008 Deploying the NETGEAR Wireless-N Access Point Now that you have completed the setup step s, you can deploy the WN802T v2 in your network.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Installation and Configuration 2-13 v1.0, September 2008 Logging in to the NETGE AR Wireless-N Access Point The WN802T v2 is set, b y default, with the IP address of 192.168.0.233 with DHCP disabled.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 2-14 Installation and Configuration v1.0, September 2008 2. Connect to the WN802T v2 by entering the default address of http://192.168.0.233 into your browser . 3. The login screen di splays (see Figure 2-1 ).
3-1 v1.0, September 2008 Chapter 3 Wireless Security Settings Y our wireless data transmissions can be receiv ed well be yond your walls by a ny on e with a compatible adapter .
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 3-2 Wireless Secu rity Settings v1.0, September 2008 • Use WP A or WP A-PSK. W i-Fi Protecte d Access (WP A) data encryption provides data security . The very strong authentication along w ith dynamic per frame rekeying of WP A make it virtually impossible to compromise.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Wireless Security Settings 3-3 v1.0, September 2008 – Network Authentication . The WN802T v2 Access P oint is set by default as an op en system (no authentication) with no da ta encryption.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 3-4 Wireless Secu rity Settings v1.0, September 2008 – Data Encryption . The available options depend on the Network Authentication setting selected (see Ta b l e 3 - 1 ); otherwise, the default is None .
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Wireless Security Settings 3-5 v1.0, September 2008 – Wir eless Client Security Separation . If enabled, the associated wireless clients will not be able to communicate with e ach other (this feature is inte nded for hotspots and ot her public access situations ).
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 3-6 Wireless Secu rity Settings v1.0, September 2008 Record the WP A-PSK/WP A2-PSK key ____ ______________ _____________ ____ • WP A RADIUS Settings.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Wireless Security Settings 3-7 v1.0, September 2008 2. From the Data Encryption drop-down menu, select encry ption strength (64 -bit, 128-bit, or 152-bit). For Open System , the default is None.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 3-8 Wireless Secu rity Settings v1.0, September 2008 Configuring WP A with RADIUS Not all wireless adapters support WP A.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Wireless Security Settings 3-9 v1.0, September 2008 4. Under the Configuration tab, select Se curity from the main menu, and then select Security Settings from the side menu. 5. Select WP A with RADIUS from the Network Authentication drop-down menu.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 3-10 Wireless Se curity Setting s v1.0, September 2008 Configuring WP A2 with RADIUS Not all wireless adapters support WP A2. Furthermore, client softwa re is required on the cl ient. Make sure your client card supports WP A2.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Wireless Security Settings 3-11 v1.0, September 2008 Configuring WP A and WP A2 with RADIUS Not all wireless adapters suppor t WP A and WP A2.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 3-12 Wireless Se curity Setting s v1.0, September 2008 4. Under the Configuration tab, select Se curity from the main menu, and then select Security Settings from the side menu. From the Network Authentication drop-down menu, select WP A & WP A2 with RADIUS from the list.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Wireless Security Settings 3-13 v1.0, September 2008 T o configure WP A-PSK: 1. From the Configuration menu select Security and from the side menu select Security Settings . 2. From the Network Authentication drop-down me nu, select WP A-PSK .
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 3-14 Wireless Se curity Setting s v1.0, September 2008 2. From the Network Authentication drop-down menu , select WP A2-PSK from the list. By default, Data Encryption will be set to TKIP + AES .
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Wireless Security Settings 3-15 v1.0, September 2008 T o configure WP A-PSK and WP A2-PSK: 1. From the Configuration menu select Security and from the side menu select Security Settings . 2. From the Network Authentication drop-down me nu, select WP A-PSK & WP A2-PSK .
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 3-16 Wireless Se curity Setting s v1.0, September 2008 3. Check the T urn Access Control On checkbox to enable the access control feature. 4. Select the desired access control database from the Select Access Control Database drop- down menu.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Wireless Security Settings 3-17 v1.0, September 2008 9. Click Add to add the wireless device to the T rusted Wir eless S tations list. Repeat these steps for each additional device you want to add to the list.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 3-18 Wireless Se curity Setting s v1.0, September 2008.
4-1 v1.0, September 2008 Chapter 4 Management This chapter describes how to use the manage ment and information features as well as the advanced wireless settings features of your NETGEAR W ireless-N Access Point WN802T v2. The management and info rmation features can be foun d under the Maintenance tab on the main menu.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 4-2 Management v1.0, September 2008 . 2. Enter the current password, in the Current Password field. 3. Enter the new password, twice, in the New Password and Repeat New Password fields.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Management 4-3 v1.0, September 2008 Upgrading the Wireless Access Point Firmware The software of the NETGEAR W ireless-N Acc ess Point is stored in FLASH memory , and can be upgraded as new software is released by NETGEA R.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 4-4 Management v1.0, September 2008 6. The WN802T v2 will check if the file is valid an d load it in to the firm ware. Once the file has been loaded the AP reboots. In some cases, it may be necessary to reconf igure the wireless access point afte r upgrading.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Management 4-5 v1.0, September 2008 The current settings are saved to a file under the default name Config . T o restore settings from a backup file: 1. In Step 1 of the previous section, click Restor e Settings on the side menu .
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 4-6 Management v1.0, September 2008 T o reboot the wireless access point from the user interface : 1. From the main menu of the browser interface, select Maintenance > Reset and the n Reboot AP on the side menu.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Management 4-7 v1.0, September 2008 The factory settings are restored and the access poin t reboots. This takes ab out a minute. A list of the factory default settings can be found in the appendix in.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 4-8 Management v1.0, September 2008 • If the wireless access point is rebooted, the table data is lost until the wireless access point rediscovers the devices.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Management 4-9 v1.0, September 2008 V iewing Network T raffic St atistics The Statistics screen displays both wired and wireless interface network traffic. Current IP Settings IP Address The IP address of the wireless access point.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 4-10 Management v1.0, September 2008 T o display statistics for the wire less access point: 1. Select St a t i s t i c s under the Monitoring tab on the main menu. The S tatistics screen displays.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Management 4-11 v1.0, September 2008 Configuring the Advanced Wireless Settings NETGEAR recommends that the Advanced W ireless Settings sh ould be modified only by an administrator very familiar with the ramifications of changing th e wireless LAN parameters.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 4-12 Management v1.0, September 2008 The default value is 100 ms. • Aggr egation Length. The default value is 65535 byt es. • AMPDU ( Aggregated-MAC Packet Data Unit ). This is a feature in IEEE 802.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Management 4-13 v1.0, September 2008 2. Make the required changes or selections to th e W ireless LAN Parameters section, based on the field descriptions outlined earlier . 3. Click Apply for your changes to take ef fect.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 4-14 Management v1.0, September 2008 • Authentication Server . This configuration is required for authentication u sing a RADIUS Server .The IP Address, Port Number , and Shar ed Secre t are required for communication with the Primary RADIUS Server .
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Management 4-15 v1.0, September 2008 RADIUS Server Settings Fields T able 4-3. RADIUS server settings fields Field Description Primary and Secondary Authentication Servers The Authentication RADIU S server provid es authentication and access control.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 4-16 Management v1.0, September 2008.
5-1 v1.0, September 2008 Chapter 5 Advanced Wireless Bridging This chapter describes how to configure the advan ced features of your WN802T v2 to on e of six access point bridge mode profiles, or in W ireless Br idge and Repeater Mode.These fea tures can be found under the W ireless Bridge option on the Configuration menu.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 5-2 Advanced Wireless Bridging v1.0, September 2008 T o configure wireless Point to Multi-point Bridging: 1. Open a web browser and log in to the WN802T v2 using the addressing scheme you have set up.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Advanced Wireless Bridging 5-3 v1.0, September 2008 7. Enter the MAC (physical) address of the other bridge mode wireless access point in the Remote MAC Address field.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 5-4 Advanced Wireless Bridging v1.0, September 2008 The following figure illustra tes a multi-point bridge setup over three LAN segments. T o configure wireless access points in a multi-point configuration: 1.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Advanced Wireless Bridging 5-5 v1.0, September 2008 • That all wireless access points are using th e same SSID, Channel, WEP authenticat ion mode, if any , and encryption (WP A is not available in bridge mode).
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 5-6 Advanced Wireless Bridging v1.0, September 2008 T o configure the WN802T v2 in wireless repeater mode: 1. Open a web browser and log in to the WN802T v2 using the addressing scheme you have set up.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Advanced Wireless Bridging 5-7 v1.0, September 2008 10. From the Data Encryption drop-down menu select encryption strength. 11 . Click Apply to save your settings. 12. Y ou are taken back to the W i reless Bridge Settings screen ( Figure 5-4 ) with the new profile information.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 5-8 Advanced Wireless Bridging v1.0, September 2008.
6-1 v1.0, September 2008 Chapter 6 T roubleshooting and Help This chapter provides informatio n for troublesho oting issues w ith your NE TGEAR W ireless-N Access Point WN802T v2 and how to avail the help features and options provided.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 6-2 Troubleshooting and Help v1.0, September 2008 T roubleshooting Following are some simple problems that could occur and their possible causes. Along with each problem description, instructions are provided to assist you in diagnosing and solving the problem.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Troubleshooting and Help 6-3 v1.0, September 2008 • Contact NETGEAR if the WLAN light remains off. I cannot configure the acce ss point from a browser . Check these items: • The WN802T v2 is properly installed, LAN connections are OK, and it is powered on.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 6-4 Troubleshooting and Help v1.0, September 2008 I cannot access the Internet or the LAN with a wireless cap able computer .
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Troubleshooting and Help 6-5 v1.0, September 2008 • Reboot: When pressed and released quickly , the WN802T v2 will reboot (restart). • Reset to Factory Defaults: This button can also be used to clear ALL data and restore ALL settings to the factory default valu es.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l 6-6 Troubleshooting and Help v1.0, September 2008.
Default Settings and Technical Specifications A-1 v1.0, September 2008 Appendix A Default Settings and T echnical Specifications This appendix provides the factory default settings and technical specifica ti ons for the NETGEAR W ireless-N Ac cess Point WN802T v2.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l A-2 Default Settings and Technical Specifications v1.0, September 2008 T echnical S p ecifications DHCP Client Disabled T ime Zone Pa.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Default Settings and Technical Specifications A-3 v1.0, September 2008 802.1 1 bg Data Rates 1, 2, 5.5, 6, 9, 1 1, 12, 18, 24, 36, 48 & 54 Mbps (Auto-rate capable) 802.1 1 b/bg/ngb Operating Frequencies 2.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l A-4 Default Settings and Technical Specifications v1.0, September 2008.
Related Documents B-1 v1.0, September 2008 Appendix B Related Document s This appendix provides links to reference documents you c an use to gain a more comple te understanding of the technolog ies used in your NETGEAR p roduct. Document Link Internet Networking and TCP/IP Addressing http://documentation.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l B-2 Related Documents v1.0, September 2008.
Index-1 v1.0, September 2008 Index Numerics 20 MHz legacy mode static 2-9 20/40 MHz compatibility m ode, dynamic 2-9 40 MHz high-throughput, static 2-9 802.1 1 IEEE standard 3-7 802.1 1b mode legacy 2-8 set 2-8 settings 2-7 standard access point 5-1 802.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l Index-2 v1.0, September 2008 unauthorized 2-1 access control available wire le ss stations 3-16 enable 3-16 MAC address database, loc.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Index-3 v1.0, September 2008 wireless, test 2-12 connectivity area see range country/region 2-4, 4-8 default setting A-2 coverage wireless network 1-1 CSMA/CA R TS threshold 4-11 CSMA/CD R TS threshold 4-11 CTS packet 4-1 1 Customer support 1-iii D data encryption .
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l Index-4 v1.0, September 2008 front panel 1-2 G guard interval 2-9 H Help offline 6-1 online 6-5 high-throughput mode static 2-9 hotsp.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Index-5 v1.0, September 2008 see also passphrase 3-14 WP A2-PSK 3-14 WP A-PSK/WP A2/PSK 3-15 network key/passphrase 3-4 NTP client enable 2-.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l Index-6 v1.0, September 2008 factory default settings 4-6 saved settings 4-5 RIFS 4-12 RT S p a c k e t CSMA/CA 4-11 R TS threshold 4.
NETGEAR Wireless-N Access P oint WN802T v2 Reference Manual Index-7 v1.0, September 2008 U upgrade firmware 4-3 user name default 2-3, 2-1 1, 2-14 users maximum 1-1 W warranty 1-3 WEP 3-1 configure 3-.
NETGEAR Wireless-N Access Poin t WN802T v2 Re fe re nc e Ma n ua l Index-8 v1.0, September 2008 WP A2-PSK 3-3 configure 3-13 WP A-PSK 3-3 configure 3-12 restrictions 3-12 WP A-PSK/WP A2-PSK 3-3 config.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il NETGEAR WN802T è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del NETGEAR WN802T - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso NETGEAR WN802T imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul NETGEAR WN802T ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il NETGEAR WN802T, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del NETGEAR WN802T.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il NETGEAR WN802T. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo NETGEAR WN802T insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
